Merge tag 'v3.18-rc4' into drm-next

backmerge to get vmwgfx locking changes into next as the
conflict with per-plane locking.

19 files changed, 93 insertions, 30 deletions

diff --git a/Documentation/ABI/testing/sysfs-ibft b/Documentation/ABI/testing/sysfs-ibft
index c2b7d1154bec..cac3930bdb04 100644
--- a/Documentation/ABI/testing/sysfs-ibft
+++ b/Documentation/ABI/testing/sysfs-ibft
@@ -20,4 +20,4 @@ Date:		November 2007
 Contact:	Konrad Rzeszutek <ketuzsezr@darnok.org>
 Description:	The /sys/firmware/ibft/ethernetX directory will contain
 		files that expose the iSCSI Boot Firmware Table NIC data.
-		This can this can the IP address, MAC, and gateway of the NIC.
+		Usually this contains the IP address, MAC, and gateway of the NIC.
diff --git a/Documentation/DocBook/media/Makefile b/Documentation/DocBook/media/Makefile
index df2962d9e11e..8bf7c6191296 100644
--- a/Documentation/DocBook/media/Makefile
+++ b/Documentation/DocBook/media/Makefile
@@ -25,7 +25,7 @@ GENFILES := $(addprefix $(MEDIA_OBJ_DIR)/, $(MEDIA_TEMP))
 PHONY += cleanmediadocs
 
 cleanmediadocs:
-	-@rm `find $(MEDIA_OBJ_DIR) -type l` $(GENFILES) $(OBJIMGFILES) 2>/dev/null
+	-@rm -f `find $(MEDIA_OBJ_DIR) -type l` $(GENFILES) $(OBJIMGFILES) 2>/dev/null
 
 $(obj)/media_api.xml: $(GENFILES) FORCE
 
diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml
index 07ffc76553ba..0a2debfa68f6 100644
--- a/Documentation/DocBook/media/v4l/compat.xml
+++ b/Documentation/DocBook/media/v4l/compat.xml
@@ -2566,6 +2566,10 @@ fields changed from _s32 to _u32.
 	  <para>Added compound control types and &VIDIOC-QUERY-EXT-CTRL;.
 	  </para>
         </listitem>
+      </orderedlist>
+    </section>
+
+    <section>
       <title>V4L2 in Linux 3.18</title>
       <orderedlist>
 	<listitem>
diff --git a/Documentation/HOWTO b/Documentation/HOWTO
index 57cf5efb044d..93aa8604630e 100644
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -324,7 +324,6 @@ tree, they need to be integration-tested.  For this purpose, a special
 testing repository exists into which virtually all subsystem trees are
 pulled on an almost daily basis:
 	http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git
-	http://linux.f-seidel.de/linux-next/pmwiki/
 
 This way, the -next kernel gives a summary outlook onto what will be
 expected to go into the mainline kernel at the next merge period.
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 482c74947de0..1fa1caa198eb 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -483,12 +483,10 @@ have been included in the discussion
 
 14) Using Reported-by:, Tested-by:, Reviewed-by:, Suggested-by: and Fixes:
 
-If this patch fixes a problem reported by somebody else, consider adding a
-Reported-by: tag to credit the reporter for their contribution.  Please
-note that this tag should not be added without the reporter's permission,
-especially if the problem was not reported in a public forum.  That said,
-if we diligently credit our bug reporters, they will, hopefully, be
-inspired to help us again in the future.
+The Reported-by tag gives credit to people who find bugs and report them and it
+hopefully inspires them to help us again in the future.  Please note that if
+the bug was reported in private, then ask for permission first before using the
+Reported-by tag.
 
 A Tested-by: tag indicates that the patch has been successfully tested (in
 some environment) by the person named.  This tag informs maintainers that
diff --git a/Documentation/development-process/2.Process b/Documentation/development-process/2.Process
index 2e0617936e8f..c24e156a6118 100644
--- a/Documentation/development-process/2.Process
+++ b/Documentation/development-process/2.Process
@@ -289,10 +289,6 @@ lists when they are assembled; they can be downloaded from:
 
 	http://www.kernel.org/pub/linux/kernel/next/
 
-Some information about linux-next has been gathered at:
-
-	http://linux.f-seidel.de/linux-next/pmwiki/
-
 Linux-next has become an integral part of the kernel development process;
 all patches merged during a given merge window should really have found
 their way into linux-next some time before the merge window opens.
diff --git a/Documentation/development-process/8.Conclusion b/Documentation/development-process/8.Conclusion
index 1990ab4b4949..caef69022e9c 100644
--- a/Documentation/development-process/8.Conclusion
+++ b/Documentation/development-process/8.Conclusion
@@ -22,10 +22,6 @@ Beyond that, a valuable resource for kernel developers is:
 
 	http://kernelnewbies.org/
 
-Information about the linux-next tree gathers at:
-
-	http://linux.f-seidel.de/linux-next/pmwiki/
-
 And, of course, one should not forget http://kernel.org/, the definitive
 location for kernel release information.
 
diff --git a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt
index 0f8487b88822..e77e167593db 100644
--- a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt
+++ b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt
@@ -11,3 +11,5 @@ Optional properties:
   are supported on the device.  Valid value for SMSC LAN91c111 are
   1, 2 or 4.  If it's omitted or invalid, the size would be 2 meaning
   16-bit access only.
+- power-gpios: GPIO to control the PWRDWN pin
+- reset-gpios: GPIO to control the RESET pin
diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt
index 955df60a118c..d556dcb8816b 100644
--- a/Documentation/devicetree/bindings/sound/sgtl5000.txt
+++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt
@@ -7,10 +7,20 @@ Required properties:
 
 - clocks : the clock provider of SYS_MCLK
 
+- VDDA-supply : the regulator provider of VDDA
+
+- VDDIO-supply: the regulator provider of VDDIO
+
+Optional properties:
+
+- VDDD-supply : the regulator provider of VDDD
+
 Example:
 
 codec: sgtl5000@0a {
 	compatible = "fsl,sgtl5000";
 	reg = <0x0a>;
 	clocks = <&clks 150>;
+	VDDA-supply = <&reg_3p3v>;
+	VDDIO-supply = <&reg_3p3v>;
 };
diff --git a/Documentation/devicetree/bindings/submitting-patches.txt b/Documentation/devicetree/bindings/submitting-patches.txt
index 042a0273b8ba..b7ba01ad1426 100644
--- a/Documentation/devicetree/bindings/submitting-patches.txt
+++ b/Documentation/devicetree/bindings/submitting-patches.txt
@@ -12,6 +12,9 @@ I. For patch submitters
 
        devicetree@vger.kernel.org
 
+  3) The Documentation/ portion of the patch should come in the series before
+     the code implementing the binding.
+
 II. For kernel maintainers
 
   1) If you aren't comfortable reviewing a given binding, reply to it and ask
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
index 0ef00be44b01..43404b197933 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
@@ -7,7 +7,10 @@ Required properties:
 			    - "renesas,thermal-r8a73a4" (R-Mobile AP6)
 			    - "renesas,thermal-r8a7779" (R-Car H1)
 			    - "renesas,thermal-r8a7790" (R-Car H2)
-			    - "renesas,thermal-r8a7791" (R-Car M2)
+			    - "renesas,thermal-r8a7791" (R-Car M2-W)
+			    - "renesas,thermal-r8a7792" (R-Car V2H)
+			    - "renesas,thermal-r8a7793" (R-Car M2-N)
+			    - "renesas,thermal-r8a7794" (R-Car E2)
 - reg			: Address range of the thermal registers.
 			  The 1st reg will be recognized as common register
 			  if it has "interrupts".
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 74339c57b914..479f33204a37 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1264,7 +1264,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	i8042.noloop	[HW] Disable the AUX Loopback command while probing
 			     for the AUX port
 	i8042.nomux	[HW] Don't check presence of an active multiplexing
-			     controller. Default: true.
+			     controller
 	i8042.nopnp	[HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX
 			     controllers
 	i8042.notimeout	[HW] Ignore timeout condition signalled by controller
@@ -1307,6 +1307,18 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			.cdrom .chs .ignore_cable are additional options
 			See Documentation/ide/ide.txt.
 
+	ide-generic.probe-mask= [HW] (E)IDE subsystem
+			Format: <int>
+			Probe mask for legacy ISA IDE ports.  Depending on
+			platform up to 6 ports are supported, enabled by
+			setting corresponding bits in the mask to 1.  The
+			default value is 0x0, which has a special meaning.
+			On systems that have PCI, it triggers scanning the
+			PCI bus for the first and the second port, which
+			are then probed.  On systems without PCI the value
+			of 0x0 enables probing the two first ports as if it
+			was 0x3.
+
 	ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem
 			Claim all unknown PCI IDE storage controllers.
 
@@ -1587,6 +1599,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	kmemleak=	[KNL] Boot-time kmemleak enable/disable
 			Valid arguments: on, off
 			Default: on
+			Built with CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y,
+			the default is off.
 
 	kmemcheck=	[X86] Boot-time kmemcheck enable/disable/one-shot mode
 			Valid arguments: 0, 1, 2
@@ -3607,7 +3621,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	usb-storage.delay_use=
 			[UMS] The delay in seconds before a new device is
-			scanned for Logical Units (default 5).
+			scanned for Logical Units (default 1).
 
 	usb-storage.quirks=
 			[UMS] A list of quirks entries to supplement or
diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt
index f4f033c8d856..45e777f4e41d 100644
--- a/Documentation/kmemleak.txt
+++ b/Documentation/kmemleak.txt
@@ -62,6 +62,10 @@ Memory may be allocated or freed before kmemleak is initialised and
 these actions are stored in an early log buffer. The size of this buffer
 is configured via the CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE option.
 
+If CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF are enabled, the kmemleak is
+disabled by default. Passing "kmemleak=on" on the kernel command
+line enables the function. 
+
 Basic Algorithm
 ---------------
 
diff --git a/Documentation/prctl/Makefile b/Documentation/prctl/Makefile
index 3e3232dcb2b8..2948b7b124b9 100644
--- a/Documentation/prctl/Makefile
+++ b/Documentation/prctl/Makefile
@@ -1,5 +1,5 @@
 # List of programs to build
-hostprogs-y := disable-tsc-ctxt-sw-stress-test disable-tsc-on-off-stress-test disable-tsc-test
+hostprogs-$(CONFIG_X86) := disable-tsc-ctxt-sw-stress-test disable-tsc-on-off-stress-test disable-tsc-test
 # Tell kbuild to always build the programs
 always := $(hostprogs-y)
 
diff --git a/Documentation/ptp/testptp.mk b/Documentation/ptp/testptp.mk
new file mode 100644
index 000000000000..4ef2d9755421
--- /dev/null
+++ b/Documentation/ptp/testptp.mk
@@ -0,0 +1,33 @@
+# PTP 1588 clock support - User space test program
+#
+# Copyright (C) 2010 OMICRON electronics GmbH
+#
+#  This program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, write to the Free Software
+#  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+CC        = $(CROSS_COMPILE)gcc
+INC       = -I$(KBUILD_OUTPUT)/usr/include
+CFLAGS    = -Wall $(INC)
+LDLIBS    = -lrt
+PROGS     = testptp
+
+all: $(PROGS)
+
+testptp: testptp.o
+
+clean:
+	rm -f testptp.o
+
+distclean: clean
+	rm -f $(PROGS)
diff --git a/Documentation/vDSO/Makefile b/Documentation/vDSO/Makefile
index 2b99e57207c1..ee075c3d2124 100644
--- a/Documentation/vDSO/Makefile
+++ b/Documentation/vDSO/Makefile
@@ -10,3 +10,6 @@ always := $(hostprogs-y)
 HOSTCFLAGS := -I$(objtree)/usr/include -std=gnu99
 HOSTCFLAGS_vdso_standalone_test_x86.o := -fno-asynchronous-unwind-tables -fno-stack-protector
 HOSTLOADLIBES_vdso_standalone_test_x86 := -nostdlib
+ifeq ($(CONFIG_X86_32),y)
+HOSTLOADLIBES_vdso_standalone_test_x86 += -lgcc_s
+endif
diff --git a/Documentation/vDSO/vdso_standalone_test_x86.c b/Documentation/vDSO/vdso_standalone_test_x86.c
index d46240265c50..93b0ebf8cc38 100644
--- a/Documentation/vDSO/vdso_standalone_test_x86.c
+++ b/Documentation/vDSO/vdso_standalone_test_x86.c
@@ -63,7 +63,7 @@ static inline void linux_exit(int code)
 	x86_syscall3(__NR_exit, code, 0, 0);
 }
 
-void to_base10(char *lastdig, uint64_t n)
+void to_base10(char *lastdig, time_t n)
 {
 	while (n) {
 		*lastdig = (n % 10) + '0';
diff --git a/Documentation/video4linux/vivid.txt b/Documentation/video4linux/vivid.txt
index eeb11a28e4fc..e5a940e3d304 100644
--- a/Documentation/video4linux/vivid.txt
+++ b/Documentation/video4linux/vivid.txt
@@ -221,12 +221,11 @@ ccs_out_mode: specify the allowed video output crop/compose/scaling combination
 		       key, not quality.
 
 multiplanar: select whether each device instance supports multi-planar formats,
-	and thus the V4L2 multi-planar API. By default the first device instance
-	is single-planar, the second multi-planar, and it keeps alternating.
+	and thus the V4L2 multi-planar API. By default device instances are
+	single-planar.
 
 	This module option can override that for each instance. Values are:
 
-		0: use alternating single and multi-planar devices.
 		1: this is a single-planar instance.
 		2: this is a multi-planar instance.
 
@@ -975,9 +974,8 @@ is set, then the alpha component is only used for the color red and set to
 0 otherwise.
 
 The driver has to be configured to support the multiplanar formats. By default
-the first driver instance is single-planar, the second is multi-planar, and it
-keeps alternating. This can be changed by setting the multiplanar module option,
-see section 1 for more details on that option.
+the driver instances are single-planar. This can be changed by setting the
+multiplanar module option, see section 1 for more details on that option.
 
 If the driver instance is using the multiplanar formats/API, then the first
 single planar format (YUYV) and the multiplanar NV16M and NV61M formats the
@@ -1021,7 +1019,7 @@ the output overlay for the video output, turn on video looping and capture
 to see the blended framebuffer overlay that's being written to by the second
 instance. This setup would require the following commands:
 
-	$ sudo modprobe vivid n_devs=2 node_types=0x10101,0x1 multiplanar=1,1
+	$ sudo modprobe vivid n_devs=2 node_types=0x10101,0x1
 	$ v4l2-ctl -d1 --find-fb
 	/dev/fb1 is the framebuffer associated with base address 0x12800000
 	$ sudo v4l2-ctl -d2 --set-fbuf fb=1
diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt
index bdd4bb97fff7..b64e0af9cc56 100644
--- a/Documentation/vm/hugetlbpage.txt
+++ b/Documentation/vm/hugetlbpage.txt
@@ -274,7 +274,7 @@ This command mounts a (pseudo) filesystem of type hugetlbfs on the directory
 /mnt/huge.  Any files created on /mnt/huge uses huge pages.  The uid and gid
 options sets the owner and group of the root of the file system.  By default
 the uid and gid of the current process are taken.  The mode option sets the
-mode of root of file system to value & 0777.  This value is given in octal.
+mode of root of file system to value & 01777.  This value is given in octal.
 By default the value 0755 is picked. The size option sets the maximum value of
 memory (huge pages) allowed for that filesystem (/mnt/huge). The size is
 rounded down to HPAGE_SIZE.  The option nr_inodes sets the maximum number of