Merge tag 'net-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
 "Including fixes from netfilter.

  There is a recently notified BT regression with no fix yet. I do not
  think a fix will land in the next week.

  Current release - regressions:

   - core: tighten bad gso csum offset check in virtio_net_hdr

   - netfilter: move nf flowtable bpf initialization in
     nf_flow_table_module_init()

   - eth: ice: stop calling pci_disable_device() as we use pcim

   - eth: fou: fix null-ptr-deref in GRO.

  Current release - new code bugs:

   - hsr: prevent NULL pointer dereference in hsr_proxy_announce()

  Previous releases - regressions:

   - hsr: remove seqnr_lock

   - netfilter: nft_socket: fix sk refcount leaks

   - mptcp: pm: fix uaf in __timer_delete_sync

   - phy: dp83822: fix NULL pointer dereference on DP83825 devices

   - eth: revert "virtio_net: rx enable premapped mode by default"

   - eth: octeontx2-af: Modify SMQ flush sequence to drop packets

  Previous releases - always broken:

   - eth: mlx5: fix bridge mode operations when there are no VFs

   - eth: igb: Always call igb_xdp_ring_update_tail() under Tx lock"

* tag 'net-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
  net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
  net: tighten bad gso csum offset check in virtio_net_hdr
  netlink: specs: mptcp: fix port endianness
  net: dpaa: Pad packets to ETH_ZLEN
  mptcp: pm: Fix uaf in __timer_delete_sync
  net: libwx: fix number of Rx and Tx descriptors
  net: dsa: felix: ignore pending status of TAS module when it's disabled
  net: hsr: prevent NULL pointer dereference in hsr_proxy_announce()
  selftests: mptcp: include net_helper.sh file
  selftests: mptcp: include lib.sh file
  selftests: mptcp: join: restrict fullmesh endp on 1st sf
  netfilter: nft_socket: make cgroupsv2 matching work with namespaces
  netfilter: nft_socket: fix sk refcount leaks
  MAINTAINERS: Add ethtool pse-pd to PSE NETWORK DRIVER
  dt-bindings: net: tja11xx: fix the broken binding
  selftests: net: csum: Fix checksums for packets with non-zero padding
  net: phy: dp83822: Fix NULL pointer dereference on DP83825 devices
  virtio_net: disable premapped mode by default
  Revert "virtio_net: big mode skip the unmap check"
  Revert "virtio_net: rx remove premapped failover code"
  ...

2 files changed, 46 insertions, 17 deletions

diff --git a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
index 85bfa45f5122..a754a61adc2d 100644
--- a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
+++ b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
@@ -14,8 +14,53 @@ maintainers:
 description:
   Bindings for NXP TJA11xx automotive PHYs
 
+properties:
+  compatible:
+    enum:
+      - ethernet-phy-id0180.dc40
+      - ethernet-phy-id0180.dc41
+      - ethernet-phy-id0180.dc48
+      - ethernet-phy-id0180.dd00
+      - ethernet-phy-id0180.dd01
+      - ethernet-phy-id0180.dd02
+      - ethernet-phy-id0180.dc80
+      - ethernet-phy-id0180.dc82
+      - ethernet-phy-id001b.b010
+      - ethernet-phy-id001b.b013
+      - ethernet-phy-id001b.b030
+      - ethernet-phy-id001b.b031
+
 allOf:
   - $ref: ethernet-phy.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ethernet-phy-id0180.dc40
+              - ethernet-phy-id0180.dc41
+              - ethernet-phy-id0180.dc48
+              - ethernet-phy-id0180.dd00
+              - ethernet-phy-id0180.dd01
+              - ethernet-phy-id0180.dd02
+
+    then:
+      properties:
+        nxp,rmii-refclk-in:
+          type: boolean
+          description: |
+            The REF_CLK is provided for both transmitted and received data
+            in RMII mode. This clock signal is provided by the PHY and is
+            typically derived from an external 25MHz crystal. Alternatively,
+            a 50MHz clock signal generated by an external oscillator can be
+            connected to pin REF_CLK. A third option is to connect a 25MHz
+            clock to pin CLK_IN_OUT. So, the REF_CLK should be configured
+            as input or output according to the actual circuit connection.
+            If present, indicates that the REF_CLK will be configured as
+            interface reference clock input when RMII mode enabled.
+            If not present, the REF_CLK will be configured as interface
+            reference clock output when RMII mode enabled.
+            Only supported on TJA1100 and TJA1101.
 
 patternProperties:
   "^ethernet-phy@[0-9a-f]+$":
@@ -32,22 +77,6 @@ patternProperties:
         description:
           The ID number for the child PHY. Should be +1 of parent PHY.
 
-      nxp,rmii-refclk-in:
-        type: boolean
-        description: |
-          The REF_CLK is provided for both transmitted and received data
-          in RMII mode. This clock signal is provided by the PHY and is
-          typically derived from an external 25MHz crystal. Alternatively,
-          a 50MHz clock signal generated by an external oscillator can be
-          connected to pin REF_CLK. A third option is to connect a 25MHz
-          clock to pin CLK_IN_OUT. So, the REF_CLK should be configured
-          as input or output according to the actual circuit connection.
-          If present, indicates that the REF_CLK will be configured as
-          interface reference clock input when RMII mode enabled.
-          If not present, the REF_CLK will be configured as interface
-          reference clock output when RMII mode enabled.
-          Only supported on TJA1100 and TJA1101.
-
     required:
       - reg
 
@@ -60,6 +89,7 @@ examples:
         #size-cells = <0>;
 
         tja1101_phy0: ethernet-phy@4 {
+            compatible = "ethernet-phy-id0180.dc40";
             reg = <0x4>;
             nxp,rmii-refclk-in;
         };
diff --git a/Documentation/netlink/specs/mptcp_pm.yaml b/Documentation/netlink/specs/mptcp_pm.yaml
index af525ed29792..30d8342cacc8 100644
--- a/Documentation/netlink/specs/mptcp_pm.yaml
+++ b/Documentation/netlink/specs/mptcp_pm.yaml
@@ -109,7 +109,6 @@ attribute-sets:
       -
         name: port
         type: u16
-        byte-order: big-endian
       -
         name: flags
         type: u32