Merge tag 'spi-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "Quite an active release for the SPI subsystem, lots of small updates
  and fixes scattered about with highlights including:

   - 3-wire support in the GPIO driver.

   - support for setting a custom memory name in the memory mapped flash
     drivers.

   - support for extended mode in the Freescale DSPI controller.

   - support for the non-standard integration with the Microsemi Ocelot
     platform in the DesignWare driver.

   - new driver for the SocioNext UniPhier"

* tag 'spi-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (47 commits)
  spi: davinci: fix a NULL pointer dereference
  spi: spi-mem: Constify spi_mem->name
  mtd: m25p80: Call spi_mem_get_name() to let controller set a custom name
  spi: spi-mem: Extend the SPI mem interface to set a custom memory name
  spi: spi-mem: Fix a typo in the documentation of struct spi_mem
  spi: uniphier: remove unnecessary include headers
  spi: spi-gpio: add SPI_3WIRE support
  spi: add flags parameter to txrx_word function pointers
  spi: add SPI controller driver for UniPhier SoC
  spi: add DT bindings for UniPhier SPI controller
  spi: dw: document Microsemi integration
  spi: img-spfi: Set device select bits for SPFI port state
  spi: omap2-mcspi: remove several redundant variables
  spi: dw-mmio: add MSCC Ocelot support
  spi: dw: export dw_spi_set_cs
  spi: spi-fsl-espi: Log fifo counters on error
  spi: imx: Use the longuest possible burst size when in dynamic_burst
  spi: imx: remove unnecessary check in spi_imx_can_dma
  spi: imx: Use correct number of bytes per words
  spi: imx: Use dynamic bursts only when bits_per_word is 8, 16 or 32
  ...

3 files changed, 27 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
index 204b311e0400..642d3fb1ef85 100644
--- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
+++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
@@ -1,8 +1,10 @@
 Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface.
 
 Required properties:
-- compatible : "snps,dw-apb-ssi"
-- reg : The register base for the controller.
+- compatible : "snps,dw-apb-ssi" or "mscc,<soc>-spi", where soc is "ocelot" or
+  "jaguar2"
+- reg : The register base for the controller. For "mscc,<soc>-spi", a second
+  register set is required (named ICPU_CFG:SPI_MST)
 - interrupts : One interrupt, used by the controller.
 - #address-cells : <1>, as required by generic SPI binding.
 - #size-cells : <0>, also as required by generic SPI binding.
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
index 6e3ffacbba32..a0edac12d8df 100644
--- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt
+++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
@@ -7,6 +7,7 @@ Required Properties:
 
 - compatible: should be one of the following.
     "rockchip,rv1108-spi" for rv1108 SoCs.
+    "rockchip,px30-spi", "rockchip,rk3066-spi" for px30 SoCs.
     "rockchip,rk3036-spi" for rk3036 SoCS.
     "rockchip,rk3066-spi" for rk3066 SoCs.
     "rockchip,rk3188-spi" for rk3188 SoCs.
diff --git a/Documentation/devicetree/bindings/spi/spi-uniphier.txt b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
new file mode 100644
index 000000000000..504a4ecfc7b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
@@ -0,0 +1,22 @@
+Socionext UniPhier SPI controller driver
+
+UniPhier SoCs have SCSSI which supports SPI single channel.
+
+Required properties:
+ - compatible: should be "socionext,uniphier-scssi"
+ - reg: address and length of the spi master registers
+ - #address-cells: must be <1>, see spi-bus.txt
+ - #size-cells: must be <0>, see spi-bus.txt
+ - clocks: A phandle to the clock for the device.
+ - resets: A phandle to the reset control for the device.
+
+Example:
+
+spi0: spi@54006000 {
+	compatible = "socionext,uniphier-scssi";
+	reg = <0x54006000 0x100>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clocks = <&peri_clk 11>;
+	resets = <&peri_rst 11>;
+};