Merge tag 'arm-fixes-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "The bulk of the changes this time are for device tree files in the
  rockchips platform, addressing correctness issues on individual
  boards, plus one change in the rk356x SoC file to make it match the
  binding.

  The only other changes that came in are

   - a CPU frequencey scaling fix for JH7110 (RISC-V)

   - a build fix for the cznic hwrandom driver

   - a fix for a deadlock in qualcomm uefi secure application firmware
     driver"

* tag 'arm-fixes-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  platform: cznic: turris-omnia-mcu: fix HW_RANDOM dependency
  riscv: dts: starfive: jh7110-common: Fix lower rate of CPUfreq by setting PLL0 rate to 1.5GHz
  firmware: qcom: uefisecapp: Fix deadlock in qcuefi_acquire()
  arm64: dts: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
  dt-bindings: soc: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
  arm64: dts: rockchip: override BIOS_DISABLE signal via GPIO hog on RK3399 Puma
  arm64: dts: rockchip: fix eMMC/SPI corruption when audio has been used on RK3399 Puma
  arm64: dts: rockchip: fix PMIC interrupt pin in pinctrl for ROCK Pi E
  arm64: dts: rockchip: Remove broken tsadc pinctrl binding for rk356x

4 files changed, 40 insertions, 11 deletions

diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
index a608a219543e..3e08e2fd0a78 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
@@ -387,7 +387,7 @@
 
 	pmic {
 		pmic_int_l: pmic-int-l {
-			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index ccbe3a7a1d2c..d24444cdf54a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -154,6 +154,22 @@
 	};
 };
 
+&gpio3 {
+	/*
+	 * The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module
+	 * eMMC and SPI flash powered-down initially (in fact it keeps the
+	 * reset signal asserted). BIOS_DISABLE_OVERRIDE pin allows to override
+	 * that signal so that eMMC and SPI can be used regardless of the state
+	 * of the signal.
+	 */
+	bios-disable-override-hog {
+		gpios = <RK_PD5 GPIO_ACTIVE_LOW>;
+		gpio-hog;
+		line-name = "bios_disable_override";
+		output-high;
+	};
+};
+
 &gmac {
 	assigned-clocks = <&cru SCLK_RMII_SRC>;
 	assigned-clock-parents = <&clkin_gmac>;
@@ -409,6 +425,7 @@
 
 &i2s0 {
 	pinctrl-0 = <&i2s0_2ch_bus>;
+	pinctrl-1 = <&i2s0_2ch_bus_bclk_off>;
 	rockchip,playback-channels = <2>;
 	rockchip,capture-channels = <2>;
 	status = "okay";
@@ -417,8 +434,8 @@
 /*
  * As Q7 does not specify neither a global nor a RX clock for I2S these
  * signals are not used. Furthermore I2S0_LRCK_RX is used as GPIO.
- * Therefore we have to redefine the i2s0_2ch_bus definition to prevent
- * conflicts.
+ * Therefore we have to redefine the i2s0_2ch_bus and i2s0_2ch_bus_bclk_off
+ * definitions to prevent conflicts.
  */
 &i2s0_2ch_bus {
 	rockchip,pins =
@@ -428,6 +445,14 @@
 		<3 RK_PD7 1 &pcfg_pull_none>;
 };
 
+&i2s0_2ch_bus_bclk_off {
+	rockchip,pins =
+		<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>,
+		<3 RK_PD2 1 &pcfg_pull_none>,
+		<3 RK_PD3 1 &pcfg_pull_none>,
+		<3 RK_PD7 1 &pcfg_pull_none>;
+};
+
 &io_domains {
 	status = "okay";
 	bt656-supply = <&vcc_1v8>;
@@ -449,9 +474,14 @@
 
 &pinctrl {
 	pinctrl-names = "default";
-	pinctrl-0 = <&q7_thermal_pin>;
+	pinctrl-0 = <&q7_thermal_pin &bios_disable_override_hog_pin>;
 
 	gpios {
+		bios_disable_override_hog_pin: bios-disable-override-hog-pin {
+			rockchip,pins =
+				<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
 		q7_thermal_pin: q7-thermal-pin {
 			rockchip,pins =
 				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index 4690be841a1c..c72b3a608edd 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -1592,10 +1592,9 @@
 			 <&cru SRST_TSADCPHY>;
 		rockchip,grf = <&grf>;
 		rockchip,hw-tshut-temp = <95000>;
-		pinctrl-names = "init", "default", "sleep";
-		pinctrl-0 = <&tsadc_pin>;
-		pinctrl-1 = <&tsadc_shutorg>;
-		pinctrl-2 = <&tsadc_pin>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&tsadc_shutorg>;
+		pinctrl-1 = <&tsadc_pin>;
 		#thermal-sensor-cells = <1>;
 		status = "disabled";
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
index b6e4df180f0b..ee99166ebd46 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
@@ -582,14 +582,14 @@
 	};
 
 	vo0_grf: syscon@fd5a6000 {
-		compatible = "rockchip,rk3588-vo-grf", "syscon";
+		compatible = "rockchip,rk3588-vo0-grf", "syscon";
 		reg = <0x0 0xfd5a6000 0x0 0x2000>;
 		clocks = <&cru PCLK_VO0GRF>;
 	};
 
 	vo1_grf: syscon@fd5a8000 {
-		compatible = "rockchip,rk3588-vo-grf", "syscon";
-		reg = <0x0 0xfd5a8000 0x0 0x100>;
+		compatible = "rockchip,rk3588-vo1-grf", "syscon";
+		reg = <0x0 0xfd5a8000 0x0 0x4000>;
 		clocks = <&cru PCLK_VO1GRF>;
 	};