diff options
| author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2020-10-05 08:54:36 +0200 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2020-10-05 08:54:36 +0200 |
| commit | 168ae5a74b4a9ebf0bd9c5ea7008af0b7a6ccf04 (patch) | |
| tree | b3d8e85dd327bd288064a43e1020b770d18db30b /arch/arm | |
| parent | 21c949b21802341411937291fb04e153b3c8f471 (diff) | |
| parent | 549738f15da0e5a00275977623be199fbbf7df50 (diff) | |
Merge 5.9-rc8 into usb-next
We need the USB fixes in here as well for testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/boot/dts/at91-sama5d2_icp.dts | 2 | ||||
| -rw-r--r-- | arch/arm/boot/dts/bcm2835-rpi.dtsi | 2 | ||||
| -rw-r--r-- | arch/arm/mach-imx/cpuidle-imx6q.c | 4 |
3 files changed, 5 insertions, 3 deletions
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts index 8d19925fc09e..6783cf16ff81 100644 --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts @@ -116,7 +116,6 @@ switch0: ksz8563@0 { compatible = "microchip,ksz8563"; reg = <0>; - phy-mode = "mii"; reset-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_LOW>; spi-max-frequency = <500000>; @@ -140,6 +139,7 @@ reg = <2>; label = "cpu"; ethernet = <&macb0>; + phy-mode = "mii"; fixed-link { speed = <100>; full-duplex; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index f7ae5a4530b8..d94357b21f7e 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -13,7 +13,7 @@ soc { firmware: firmware { - compatible = "raspberrypi,bcm2835-firmware", "simple-bus"; + compatible = "raspberrypi,bcm2835-firmware", "simple-mfd"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c index 24dd5bbe60e4..094337dc1bc7 100644 --- a/arch/arm/mach-imx/cpuidle-imx6q.c +++ b/arch/arm/mach-imx/cpuidle-imx6q.c @@ -24,7 +24,9 @@ static int imx6q_enter_wait(struct cpuidle_device *dev, imx6_set_lpm(WAIT_UNCLOCKED); raw_spin_unlock(&cpuidle_lock); + rcu_idle_enter(); cpu_do_idle(); + rcu_idle_exit(); raw_spin_lock(&cpuidle_lock); if (num_idle_cpus-- == num_online_cpus()) @@ -44,7 +46,7 @@ static struct cpuidle_driver imx6q_cpuidle_driver = { { .exit_latency = 50, .target_residency = 75, - .flags = CPUIDLE_FLAG_TIMER_STOP, + .flags = CPUIDLE_FLAG_TIMER_STOP | CPUIDLE_FLAG_RCU_IDLE, .enter = imx6q_enter_wait, .name = "WAIT", .desc = "Clock off", |