diff options
| author | Linus Walleij <linus.walleij@linaro.org> | 2019-03-18 16:31:22 +0100 |
|---|---|---|
| committer | Arnd Bergmann <arnd@arndb.de> | 2019-03-25 17:03:34 +0100 |
| commit | fa9463564e77067df81b0b8dec91adbbbc47bfb4 (patch) | |
| tree | 1a4b7963b427d3c8b936d3ed654ca28b71873963 /arch/arm | |
| parent | 44cd905041c85d5e50fd9d693fcd8d21a629872f (diff) | |
ARM: dts: nomadik: Fix polarity of SPI CS
The SPI DT bindings are for historical reasons a pitfall,
the ability to flag a GPIO line as active high/low with
the second cell flags was introduced later so the SPI
subsystem will only accept the bool flag spi-cs-high
to indicate that the line is active high.
It worked by mistake, but the mistake was corrected
in another commit.
The comment in the DTS file was also misleading: this
CS is indeed active high.
Fixes: cffbb02dafa3 ("ARM: dts: nomadik: Augment NHK15 panel setting")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/boot/dts/ste-nomadik-nhk15.dts | 9 |
1 files changed, 5 insertions, 4 deletions
diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts index 04066f9cb8a3..f2f6558a00f1 100644 --- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts @@ -213,12 +213,13 @@ gpio-sck = <&gpio0 5 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpio0 4 GPIO_ACTIVE_HIGH>; /* - * It's not actually active high, but the frameworks assume - * the polarity of the passed-in GPIO is "normal" (active - * high) then actively drives the line low to select the - * chip. + * This chipselect is active high. Just setting the flags + * to GPIO_ACTIVE_HIGH is not enough for the SPI DT bindings, + * it will be ignored, only the special "spi-cs-high" flag + * really counts. */ cs-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + spi-cs-high; num-chipselects = <1>; /* |