MIPS: MSP71xx: Move code.

Now that Yosemite's gone we can move the MSP71xx code one level up.

Shane McDonald <mcdonald.shane@gmail.com>'s
https://patchwork.linux-mips.org/patch/4736/ has been folded into this
patch.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 105 insertions, 0 deletions

diff --git a/arch/mips/pmcs-msp71xx/msp_smtc.c b/arch/mips/pmcs-msp71xx/msp_smtc.c
new file mode 100644
index 000000000000..c8dcc1c01e18
--- /dev/null
+++ b/arch/mips/pmcs-msp71xx/msp_smtc.c
@@ -0,0 +1,105 @@
+/*
+ * MSP71xx Platform-specific hooks for SMP operation
+ */
+#include <linux/irq.h>
+#include <linux/init.h>
+
+#include <asm/mipsmtregs.h>
+#include <asm/mipsregs.h>
+#include <asm/smtc.h>
+#include <asm/smtc_ipi.h>
+
+/* VPE/SMP Prototype implements platform interfaces directly */
+
+/*
+ * Cause the specified action to be performed on a targeted "CPU"
+ */
+
+static void msp_smtc_send_ipi_single(int cpu, unsigned int action)
+{
+	/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
+	smtc_send_ipi(cpu, LINUX_SMP_IPI, action);
+}
+
+static void msp_smtc_send_ipi_mask(const struct cpumask *mask,
+						unsigned int action)
+{
+	unsigned int i;
+
+	for_each_cpu(i, mask)
+		msp_smtc_send_ipi_single(i, action);
+}
+
+/*
+ * Post-config but pre-boot cleanup entry point
+ */
+static void __cpuinit msp_smtc_init_secondary(void)
+{
+	int myvpe;
+
+	/* Don't enable Malta I/O interrupts (IP2) for secondary VPEs */
+	myvpe = read_c0_tcbind() & TCBIND_CURVPE;
+	if (myvpe > 0)
+		change_c0_status(ST0_IM, STATUSF_IP0 | STATUSF_IP1 |
+				STATUSF_IP6 | STATUSF_IP7);
+	smtc_init_secondary();
+}
+
+/*
+ * Platform "CPU" startup hook
+ */
+static void __cpuinit msp_smtc_boot_secondary(int cpu,
+					struct task_struct *idle)
+{
+	smtc_boot_secondary(cpu, idle);
+}
+
+/*
+ * SMP initialization finalization entry point
+ */
+static void __cpuinit msp_smtc_smp_finish(void)
+{
+	smtc_smp_finish();
+}
+
+/*
+ * Hook for after all CPUs are online
+ */
+
+static void msp_smtc_cpus_done(void)
+{
+}
+
+/*
+ * Platform SMP pre-initialization
+ *
+ * As noted above, we can assume a single CPU for now
+ * but it may be multithreaded.
+ */
+
+static void __init msp_smtc_smp_setup(void)
+{
+	/*
+	 * we won't get the definitive value until
+	 * we've run smtc_prepare_cpus later, but
+	 */
+
+	if (read_c0_config3() & (1 << 2))
+		smp_num_siblings = smtc_build_cpu_map(0);
+}
+
+static void __init msp_smtc_prepare_cpus(unsigned int max_cpus)
+{
+	smtc_prepare_cpus(max_cpus);
+}
+
+struct plat_smp_ops msp_smtc_smp_ops = {
+	.send_ipi_single	= msp_smtc_send_ipi_single,
+	.send_ipi_mask		= msp_smtc_send_ipi_mask,
+	.init_secondary		= msp_smtc_init_secondary,
+	.smp_finish		= msp_smtc_smp_finish,
+	.cpus_done		= msp_smtc_cpus_done,
+	.boot_secondary		= msp_smtc_boot_secondary,
+	.smp_setup		= msp_smtc_smp_setup,
+	.prepare_cpus		= msp_smtc_prepare_cpus,
+};