pata: remove the at91 driver

This driver is orphan since commit b2026f708e09 ("ARM: at91: remove
at91sam9260/at91sam9g20 legacy board support"). Given that nobody cared
adding DT support to it, it probably means it's no longer used and is
thus a good candidate for removal.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

3 files changed, 0 insertions, 512 deletions

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 7e0fc9888f96..19069feb196d 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -884,14 +884,6 @@ config PATA_AT32
 
 	  If unsure, say N.
 
-config PATA_AT91
-	tristate "PATA support for AT91SAM9260"
-	depends on ARM && SOC_AT91SAM9
-	help
-	  This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
-
-	  If unsure, say N.
-
 config PATA_CMD640_PCI
 	tristate "CMD640 PCI PATA support (Experimental)"
 	depends on PCI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 89a0a1915d36..e29feb16bda1 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -91,7 +91,6 @@ obj-$(CONFIG_PATA_WINBOND)	+= pata_sl82c105.o
 
 # SFF PIO only
 obj-$(CONFIG_PATA_AT32)		+= pata_at32.o
-obj-$(CONFIG_PATA_AT91)		+= pata_at91.o
 obj-$(CONFIG_PATA_CMD640_PCI)	+= pata_cmd640.o
 obj-$(CONFIG_PATA_FALCON)	+= pata_falcon.o
 obj-$(CONFIG_PATA_ISAPNP)	+= pata_isapnp.o
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
deleted file mode 100644
index fd5b34f0d007..000000000000
--- a/drivers/ata/pata_at91.c
+++ /dev/null
@@ -1,503 +0,0 @@
-/*
- * PATA driver for AT91SAM9260 Static Memory Controller
- * with CompactFlash interface in True IDE mode
- *
- * Copyright (C) 2009 Matyukevich Sergey
- *               2011 Igor Plyatov
- *
- * Based on:
- *      * generic platform driver by Paul Mundt: drivers/ata/pata_platform.c
- *      * pata_at32 driver by Kristoffer Nyborg Gregertsen
- *      * at91_ide driver by Stanislaw Gruszka
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/blkdev.h>
-#include <linux/gfp.h>
-#include <scsi/scsi_host.h>
-#include <linux/ata.h>
-#include <linux/clk.h>
-#include <linux/libata.h>
-#include <linux/mfd/syscon.h>
-#include <linux/mfd/syscon/atmel-smc.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/platform_data/atmel.h>
-#include <linux/regmap.h>
-#include <linux/gpio.h>
-
-#define DRV_NAME		"pata_at91"
-#define DRV_VERSION		"0.3"
-
-#define CF_IDE_OFFSET		0x00c00000
-#define CF_ALT_IDE_OFFSET	0x00e00000
-#define CF_IDE_RES_SIZE		0x08
-#define CS_PULSE_MAXIMUM	319
-#define ER_SMC_CALC		1
-#define ER_SMC_RECALC		2
-
-struct at91_ide_info {
-	unsigned long mode;
-	unsigned int cs;
-	struct clk *mck;
-	void __iomem *ide_addr;
-	void __iomem *alt_addr;
-};
-
-/**
- * struct smc_range - range of valid values for SMC register.
- */
-struct smc_range {
-	int min;
-	int max;
-};
-
-struct regmap *smc;
-
-struct at91sam9_smc_generic_fields {
-	struct regmap_field *setup;
-	struct regmap_field *pulse;
-	struct regmap_field *cycle;
-	struct regmap_field *mode;
-} fields;
-
-/**
- * adjust_smc_value - adjust value for one of SMC registers.
- * @value: adjusted value
- * @range: array of SMC ranges with valid values
- * @size: SMC ranges array size
- *
- * This returns the difference between input and output value or negative
- * in case of invalid input value.
- * If negative returned, then output value = maximal possible from ranges.
- */
-static int adjust_smc_value(int *value, struct smc_range *range, int size)
-{
-	int maximum = (range + size - 1)->max;
-	int remainder;
-
-	do {
-		if (*value < range->min) {
-			remainder = range->min - *value;
-			*value = range->min; /* nearest valid value */
-			return remainder;
-		} else if ((range->min <= *value) && (*value <= range->max))
-			return 0;
-
-		range++;
-	} while (--size);
-	*value = maximum;
-
-	return -1; /* invalid value */
-}
-
-/**
- * calc_smc_vals - calculate SMC register values
- * @dev: ATA device
- * @setup: SMC_SETUP register value
- * @pulse: SMC_PULSE register value
- * @cycle: SMC_CYCLE register value
- *
- * This returns negative in case of invalid values for SMC registers:
- * -ER_SMC_RECALC - recalculation required for SMC values,
- * -ER_SMC_CALC - calculation failed (invalid input values).
- *
- * SMC use special coding scheme, see "Coding and Range of Timing
- * Parameters" table from AT91SAM9 datasheets.
- *
- *	SMC_SETUP = 128*setup[5] + setup[4:0]
- *	SMC_PULSE = 256*pulse[6] + pulse[5:0]
- *	SMC_CYCLE = 256*cycle[8:7] + cycle[6:0]
- */
-static int calc_smc_vals(struct device *dev,
-		int *setup, int *pulse, int *cycle, int *cs_pulse)
-{
-	int ret_val;
-	int err = 0;
-	struct smc_range range_setup[] = {	/* SMC_SETUP valid values */
-		{.min = 0,	.max = 31},	/* first  range */
-		{.min = 128,	.max = 159}	/* second range */
-	};
-	struct smc_range range_pulse[] = {	/* SMC_PULSE valid values */
-		{.min = 0,	.max = 63},	/* first  range */
-		{.min = 256,	.max = 319}	/* second range */
-	};
-	struct smc_range range_cycle[] = {	/* SMC_CYCLE valid values */
-		{.min = 0,	.max = 127},	/* first  range */
-		{.min = 256,	.max = 383},	/* second range */
-		{.min = 512,	.max = 639},	/* third  range */
-		{.min = 768,	.max = 895}	/* fourth range */
-	};
-
-	ret_val = adjust_smc_value(setup, range_setup, ARRAY_SIZE(range_setup));
-	if (ret_val < 0)
-		dev_warn(dev, "maximal SMC Setup value\n");
-	else
-		*cycle += ret_val;
-
-	ret_val = adjust_smc_value(pulse, range_pulse, ARRAY_SIZE(range_pulse));
-	if (ret_val < 0)
-		dev_warn(dev, "maximal SMC Pulse value\n");
-	else
-		*cycle += ret_val;
-
-	ret_val = adjust_smc_value(cycle, range_cycle, ARRAY_SIZE(range_cycle));
-	if (ret_val < 0)
-		dev_warn(dev, "maximal SMC Cycle value\n");
-
-	*cs_pulse = *cycle;
-	if (*cs_pulse > CS_PULSE_MAXIMUM) {
-		dev_err(dev, "unable to calculate valid SMC settings\n");
-		return -ER_SMC_CALC;
-	}
-
-	ret_val = adjust_smc_value(cs_pulse, range_pulse,
-					ARRAY_SIZE(range_pulse));
-	if (ret_val < 0) {
-		dev_warn(dev, "maximal SMC CS Pulse value\n");
-	} else if (ret_val != 0) {
-		*cycle = *cs_pulse;
-		dev_warn(dev, "SMC Cycle extended\n");
-		err = -ER_SMC_RECALC;
-	}
-
-	return err;
-}
-
-/**
- * to_smc_format - convert values into SMC format
- * @setup: SETUP value of SMC Setup Register
- * @pulse: PULSE value of SMC Pulse Register
- * @cycle: CYCLE value of SMC Cycle Register
- * @cs_pulse: NCS_PULSE value of SMC Pulse Register
- */
-static void to_smc_format(int *setup, int *pulse, int *cycle, int *cs_pulse)
-{
-	*setup = (*setup & 0x1f) | ((*setup & 0x80) >> 2);
-	*pulse = (*pulse & 0x3f) | ((*pulse & 0x100) >> 2);
-	*cycle = (*cycle & 0x7f) | ((*cycle & 0x300) >> 1);
-	*cs_pulse = (*cs_pulse & 0x3f) | ((*cs_pulse & 0x100) >> 2);
-}
-
-static unsigned long calc_mck_cycles(unsigned long ns, unsigned long mck_hz)
-{
-	unsigned long mul;
-
-	/*
-	* cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] =
-	*     x * (f / 1_000_000_000) =
-	*     x * ((f * 65536) / 1_000_000_000) / 65536 =
-	*     x * (((f / 10_000) * 65536) / 100_000) / 65536 =
-	*/
-
-	mul = (mck_hz / 10000) << 16;
-	mul /= 100000;
-
-	return (ns * mul + 65536) >> 16;    /* rounding */
-}
-
-/**
- * set_smc_timing - SMC timings setup.
- * @dev: device
- * @info: AT91 IDE info
- * @ata: ATA timings
- *
- * Its assumed that write timings are same as read timings,
- * cs_setup = 0 and cs_pulse = cycle.
- */
-static void set_smc_timing(struct device *dev, struct ata_device *adev,
-		struct at91_ide_info *info, const struct ata_timing *ata)
-{
-	int ret = 0;
-	int use_iordy;
-	unsigned int t6z;         /* data tristate time in ns */
-	unsigned int cycle;       /* SMC Cycle width in MCK ticks */
-	unsigned int setup;       /* SMC Setup width in MCK ticks */
-	unsigned int pulse;       /* CFIOR and CFIOW pulse width in MCK ticks */
-	unsigned int cs_pulse;    /* CS4 or CS5 pulse width in MCK ticks*/
-	unsigned int tdf_cycles;  /* SMC TDF MCK ticks */
-	unsigned long mck_hz;     /* MCK frequency in Hz */
-
-	t6z = (ata->mode < XFER_PIO_5) ? 30 : 20;
-	mck_hz = clk_get_rate(info->mck);
-	cycle = calc_mck_cycles(ata->cyc8b, mck_hz);
-	setup = calc_mck_cycles(ata->setup, mck_hz);
-	pulse = calc_mck_cycles(ata->act8b, mck_hz);
-	tdf_cycles = calc_mck_cycles(t6z, mck_hz);
-
-	do {
-		ret = calc_smc_vals(dev, &setup, &pulse, &cycle, &cs_pulse);
-	} while (ret == -ER_SMC_RECALC);
-
-	if (ret == -ER_SMC_CALC)
-		dev_err(dev, "Interface may not operate correctly\n");
-
-	dev_dbg(dev, "SMC Setup=%u, Pulse=%u, Cycle=%u, CS Pulse=%u\n",
-		setup, pulse, cycle, cs_pulse);
-	to_smc_format(&setup, &pulse, &cycle, &cs_pulse);
-	/* disable or enable waiting for IORDY signal */
-	use_iordy = ata_pio_need_iordy(adev);
-	if (use_iordy)
-		info->mode |= AT91_SMC_EXNWMODE_READY;
-
-	if (tdf_cycles > 15) {
-		tdf_cycles = 15;
-		dev_warn(dev, "maximal SMC TDF Cycles value\n");
-	}
-
-	dev_dbg(dev, "Use IORDY=%u, TDF Cycles=%u\n", use_iordy, tdf_cycles);
-
-	regmap_fields_write(fields.setup, info->cs,
-			    AT91SAM9_SMC_NRDSETUP(setup) |
-			    AT91SAM9_SMC_NWESETUP(setup) |
-			    AT91SAM9_SMC_NCS_NRDSETUP(0) |
-			    AT91SAM9_SMC_NCS_WRSETUP(0));
-	regmap_fields_write(fields.pulse, info->cs,
-			    AT91SAM9_SMC_NRDPULSE(pulse) |
-			    AT91SAM9_SMC_NWEPULSE(pulse) |
-			    AT91SAM9_SMC_NCS_NRDPULSE(cs_pulse) |
-			    AT91SAM9_SMC_NCS_WRPULSE(cs_pulse));
-	regmap_fields_write(fields.cycle, info->cs,
-			    AT91SAM9_SMC_NRDCYCLE(cycle) |
-			    AT91SAM9_SMC_NWECYCLE(cycle));
-	regmap_fields_write(fields.mode, info->cs, info->mode |
-			    AT91_SMC_TDF_(tdf_cycles));
-}
-
-static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
-	struct at91_ide_info *info = ap->host->private_data;
-	struct ata_timing timing;
-	int ret;
-
-	/* Compute ATA timing and set it to SMC */
-	ret = ata_timing_compute(adev, adev->pio_mode, &timing, 1000, 0);
-	if (ret) {
-		dev_warn(ap->dev, "Failed to compute ATA timing %d, "
-			 "set PIO_0 timing\n", ret);
-		timing = *ata_timing_find_mode(XFER_PIO_0);
-	}
-	set_smc_timing(ap->dev, adev, info, &timing);
-}
-
-static unsigned int pata_at91_data_xfer_noirq(struct ata_queued_cmd *qc,
-		unsigned char *buf, unsigned int buflen, int rw)
-{
-	struct at91_ide_info *info = qc->dev->link->ap->host->private_data;
-	unsigned int consumed;
-	unsigned int mode;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	regmap_fields_read(fields.mode, info->cs, &mode);
-
-	/* set 16bit mode before writing data */
-	regmap_fields_write(fields.mode, info->cs, (mode & ~AT91_SMC_DBW) |
-			    AT91_SMC_DBW_16);
-
-	consumed = ata_sff_data_xfer(qc, buf, buflen, rw);
-
-	/* restore 8bit mode after data is written */
-	regmap_fields_write(fields.mode, info->cs, (mode & ~AT91_SMC_DBW) |
-			    AT91_SMC_DBW_8);
-
-	local_irq_restore(flags);
-	return consumed;
-}
-
-static struct scsi_host_template pata_at91_sht = {
-	ATA_PIO_SHT(DRV_NAME),
-};
-
-static struct ata_port_operations pata_at91_port_ops = {
-	.inherits	= &ata_sff_port_ops,
-
-	.sff_data_xfer	= pata_at91_data_xfer_noirq,
-	.set_piomode	= pata_at91_set_piomode,
-	.cable_detect	= ata_cable_40wire,
-};
-
-static int at91sam9_smc_fields_init(struct device *dev)
-{
-	struct reg_field field = REG_FIELD(0, 0, 31);
-
-	field.id_size = 8;
-	field.id_offset = AT91SAM9_SMC_GENERIC_BLK_SZ;
-
-	field.reg = AT91SAM9_SMC_SETUP(AT91SAM9_SMC_GENERIC);
-	fields.setup = devm_regmap_field_alloc(dev, smc, field);
-	if (IS_ERR(fields.setup))
-		return PTR_ERR(fields.setup);
-
-	field.reg = AT91SAM9_SMC_PULSE(AT91SAM9_SMC_GENERIC);
-	fields.pulse = devm_regmap_field_alloc(dev, smc, field);
-	if (IS_ERR(fields.pulse))
-		return PTR_ERR(fields.pulse);
-
-	field.reg = AT91SAM9_SMC_CYCLE(AT91SAM9_SMC_GENERIC);
-	fields.cycle = devm_regmap_field_alloc(dev, smc, field);
-	if (IS_ERR(fields.cycle))
-		return PTR_ERR(fields.cycle);
-
-	field.reg = AT91SAM9_SMC_MODE(AT91SAM9_SMC_GENERIC);
-	fields.mode = devm_regmap_field_alloc(dev, smc, field);
-
-	return PTR_ERR_OR_ZERO(fields.mode);
-}
-
-static int pata_at91_probe(struct platform_device *pdev)
-{
-	struct at91_cf_data *board = dev_get_platdata(&pdev->dev);
-	struct device *dev = &pdev->dev;
-	struct at91_ide_info *info;
-	struct resource *mem_res;
-	struct ata_host *host;
-	struct ata_port *ap;
-
-	int irq_flags = 0;
-	int irq = 0;
-	int ret;
-
-	/*  get platform resources: IO/CTL memories and irq/rst pins */
-
-	if (pdev->num_resources != 1) {
-		dev_err(&pdev->dev, "invalid number of resources\n");
-		return -EINVAL;
-	}
-
-	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
-	if (!mem_res) {
-		dev_err(dev, "failed to get mem resource\n");
-		return -EINVAL;
-	}
-
-	irq = board->irq_pin;
-
-	smc = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "atmel,smc");
-	if (IS_ERR(smc))
-		return PTR_ERR(smc);
-
-	ret = at91sam9_smc_fields_init(dev);
-	if (ret < 0)
-		return ret;
-
-	/* init ata host */
-
-	host = ata_host_alloc(dev, 1);
-
-	if (!host)
-		return -ENOMEM;
-
-	ap = host->ports[0];
-	ap->ops = &pata_at91_port_ops;
-	ap->flags |= ATA_FLAG_SLAVE_POSS;
-	ap->pio_mask = ATA_PIO4;
-
-	if (!gpio_is_valid(irq)) {
-		ap->flags |= ATA_FLAG_PIO_POLLING;
-		ata_port_desc(ap, "no IRQ, using PIO polling");
-	}
-
-	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
-
-	if (!info) {
-		dev_err(dev, "failed to allocate memory for private data\n");
-		return -ENOMEM;
-	}
-
-	info->mck = clk_get(NULL, "mck");
-
-	if (IS_ERR(info->mck)) {
-		dev_err(dev, "failed to get access to mck clock\n");
-		return -ENODEV;
-	}
-
-	info->cs    = board->chipselect;
-	info->mode  = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
-		AT91_SMC_EXNWMODE_READY | AT91_SMC_BAT_SELECT |
-		AT91_SMC_DBW_8 | AT91_SMC_TDF_(0);
-
-	info->ide_addr = devm_ioremap(dev,
-			mem_res->start + CF_IDE_OFFSET, CF_IDE_RES_SIZE);
-
-	if (!info->ide_addr) {
-		dev_err(dev, "failed to map IO base\n");
-		ret = -ENOMEM;
-		goto err_put;
-	}
-
-	info->alt_addr = devm_ioremap(dev,
-			mem_res->start + CF_ALT_IDE_OFFSET, CF_IDE_RES_SIZE);
-
-	if (!info->alt_addr) {
-		dev_err(dev, "failed to map CTL base\n");
-		ret = -ENOMEM;
-		goto err_put;
-	}
-
-	ap->ioaddr.cmd_addr = info->ide_addr;
-	ap->ioaddr.ctl_addr = info->alt_addr + 0x06;
-	ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
-
-	ata_sff_std_ports(&ap->ioaddr);
-
-	ata_port_desc(ap, "mmio cmd 0x%llx ctl 0x%llx",
-			(unsigned long long)mem_res->start + CF_IDE_OFFSET,
-			(unsigned long long)mem_res->start + CF_ALT_IDE_OFFSET);
-
-	host->private_data = info;
-
-	ret = ata_host_activate(host, gpio_is_valid(irq) ? gpio_to_irq(irq) : 0,
-				gpio_is_valid(irq) ? ata_sff_interrupt : NULL,
-				irq_flags, &pata_at91_sht);
-	if (ret)
-		goto err_put;
-
-	return 0;
-
-err_put:
-	clk_put(info->mck);
-	return ret;
-}
-
-static int pata_at91_remove(struct platform_device *pdev)
-{
-	struct ata_host *host = platform_get_drvdata(pdev);
-	struct at91_ide_info *info;
-
-	if (!host)
-		return 0;
-	info = host->private_data;
-
-	ata_host_detach(host);
-
-	if (!info)
-		return 0;
-
-	clk_put(info->mck);
-
-	return 0;
-}
-
-static struct platform_driver pata_at91_driver = {
-	.probe		= pata_at91_probe,
-	.remove		= pata_at91_remove,
-	.driver		= {
-		.name		= DRV_NAME,
-	},
-};
-
-module_platform_driver(pata_at91_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Driver for CF in True IDE mode on AT91SAM9260 SoC");
-MODULE_AUTHOR("Matyukevich Sergey");
-MODULE_VERSION(DRV_VERSION);
-