diff options
| author | Miquel Raynal <miquel.raynal@bootlin.com> | 2022-03-23 18:07:51 +0100 |
|---|---|---|
| committer | Miquel Raynal <miquel.raynal@bootlin.com> | 2022-03-23 18:08:03 +0100 |
| commit | 6cadd424abb63120f8346a4509dc43bddc9401d3 (patch) | |
| tree | 181897890fec78b6cfc71a997dcfa4514cbb6951 /drivers/bcma | |
| parent | 4e371d996590f3a7e82a086d499c912c1930e968 (diff) | |
| parent | fecbd4a317c95d73c849648c406bcf1b6a0ec1cf (diff) | |
Merge tag 'nand/for-5.18' into mtd/next
Raw NAND core changes:
* Rework of_get_nand_bus_width()
* Remove of_get_nand_on_flash_bbt() wrapper
* Protect access to rawnand devices while in suspend
* bindings: Document the wp-gpios property
Rax NAND controller driver changes:
* atmel: Fix refcount issue in atmel_nand_controller_init
* nandsim:
- Add NS_PAGE_BYTE_SHIFT macro to replace the repeat pattern
- Merge repeat codes in ns_switch_state
- Replace overflow check with kzalloc to single kcalloc
* rockchip: Fix platform_get_irq.cocci warning
* stm32_fmc2: Add NAND Write Protect support
* pl353: Set the nand chip node as the flash node
* brcmnand: Fix sparse warnings in bcma_nand
* omap_elm: Remove redundant variable 'errors'
* gpmi:
- Support fast edo timings for mx28
- Validate controller clock rate
- Fix controller timings setting
* brcmnand:
- Add BCMA shim
- BCMA controller uses command shift of 0
- Allow platform data instantation
- Add platform data structure for BCMA
- Allow working without interrupts
- Move OF operations out of brcmnand_init_cs()
- Avoid pdev in brcmnand_init_cs()
- Allow SoC to provide I/O operations
- Assign soc as early as possible
Onenand changes:
* Check for error irq
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Diffstat (limited to 'drivers/bcma')
| -rw-r--r-- | drivers/bcma/driver_chipcommon_nflash.c | 20 |
1 files changed, 19 insertions, 1 deletions
diff --git a/drivers/bcma/driver_chipcommon_nflash.c b/drivers/bcma/driver_chipcommon_nflash.c index d4f699aef8c4..a1a814750b4a 100644 --- a/drivers/bcma/driver_chipcommon_nflash.c +++ b/drivers/bcma/driver_chipcommon_nflash.c @@ -7,18 +7,28 @@ #include "bcma_private.h" +#include <linux/bitops.h> #include <linux/platform_device.h> +#include <linux/platform_data/brcmnand.h> #include <linux/bcma/bcma.h> +/* Alternate NAND controller driver name in order to allow both bcm47xxnflash + * and bcma_brcmnand to be built into the same kernel image. + */ +static const char *bcma_nflash_alt_name = "bcma_brcmnand"; + struct platform_device bcma_nflash_dev = { .name = "bcma_nflash", .num_resources = 0, }; +static const char *probes[] = { "bcm47xxpart", NULL }; + /* Initialize NAND flash access */ int bcma_nflash_init(struct bcma_drv_cc *cc) { struct bcma_bus *bus = cc->core->bus; + u32 reg; if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4706 && cc->core->id.rev != 38) { @@ -33,8 +43,16 @@ int bcma_nflash_init(struct bcma_drv_cc *cc) cc->nflash.present = true; if (cc->core->id.rev == 38 && - (cc->status & BCMA_CC_CHIPST_5357_NAND_BOOT)) + (cc->status & BCMA_CC_CHIPST_5357_NAND_BOOT)) { cc->nflash.boot = true; + /* Determine the chip select that is being used */ + reg = bcma_cc_read32(cc, BCMA_CC_NAND_CS_NAND_SELECT) & 0xff; + cc->nflash.brcmnand_info.chip_select = ffs(reg) - 1; + cc->nflash.brcmnand_info.part_probe_types = probes; + cc->nflash.brcmnand_info.ecc_stepsize = 512; + cc->nflash.brcmnand_info.ecc_strength = 1; + bcma_nflash_dev.name = bcma_nflash_alt_name; + } /* Prepare platform device, but don't register it yet. It's too early, * malloc (required by device_private_init) is not available yet. */ |