diff options
| author | Ben Widawsky <ben.widawsky@intel.com> | 2022-01-31 15:51:45 -0800 |
|---|---|---|
| committer | Dan Williams <dan.j.williams@intel.com> | 2022-02-08 22:57:27 -0800 |
| commit | 229e8828c206be8fa0a159f6ff71e3b1a0484233 (patch) | |
| tree | d9c46695bad9d68bc0cb19045ecbbe91dc147de9 /drivers/cxl | |
| parent | 68cdd3d2af6964dae2f8d9b53ee94f740dcbda35 (diff) | |
cxl/pci: Implement Interface Ready Timeout
The original driver implementation used the doorbell timeout for the
Mailbox Interface Ready bit to piggy back off of, since the latter does
not have a defined timeout. This functionality, introduced in commit
8adaf747c9f0 ("cxl/mem: Find device capabilities"), needs improvement as
the recent "Add Mailbox Ready Time" ECN timeout indicates that the
mailbox ready time can be significantly longer that 2 seconds.
While the specification limits the maximum timeout to 256s, the cxl_pci
driver gives up on the mailbox after 60s. This value corresponds with
important timeout values already present in the kernel. A module
parameter is provided as an emergency override and represents the
default Linux policy for all devices.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[djbw: add modparam, drop check_device_status()]
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/164367306565.208548.1932299464604450843.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Diffstat (limited to 'drivers/cxl')
| -rw-r--r-- | drivers/cxl/pci.c | 35 |
1 files changed, 35 insertions, 0 deletions
diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c index 8dc91fd3396a..cc0cdd7e9de3 100644 --- a/drivers/cxl/pci.c +++ b/drivers/cxl/pci.c @@ -1,7 +1,9 @@ // SPDX-License-Identifier: GPL-2.0-only /* Copyright(c) 2020 Intel Corporation. All rights reserved. */ #include <linux/io-64-nonatomic-lo-hi.h> +#include <linux/moduleparam.h> #include <linux/module.h> +#include <linux/delay.h> #include <linux/sizes.h> #include <linux/mutex.h> #include <linux/list.h> @@ -35,6 +37,20 @@ /* CXL 2.0 - 8.2.8.4 */ #define CXL_MAILBOX_TIMEOUT_MS (2 * HZ) +/* + * CXL 2.0 ECN "Add Mailbox Ready Time" defines a capability field to + * dictate how long to wait for the mailbox to become ready. The new + * field allows the device to tell software the amount of time to wait + * before mailbox ready. This field per the spec theoretically allows + * for up to 255 seconds. 255 seconds is unreasonably long, its longer + * than the maximum SATA port link recovery wait. Default to 60 seconds + * until someone builds a CXL device that needs more time in practice. + */ +static unsigned short mbox_ready_timeout = 60; +module_param(mbox_ready_timeout, ushort, 0644); +MODULE_PARM_DESC(mbox_ready_timeout, + "seconds to wait for mailbox ready status"); + static int cxl_pci_mbox_wait_for_doorbell(struct cxl_dev_state *cxlds) { const unsigned long start = jiffies; @@ -281,6 +297,25 @@ static int cxl_pci_mbox_send(struct cxl_dev_state *cxlds, struct cxl_mbox_cmd *c static int cxl_pci_setup_mailbox(struct cxl_dev_state *cxlds) { const int cap = readl(cxlds->regs.mbox + CXLDEV_MBOX_CAPS_OFFSET); + unsigned long timeout; + u64 md_status; + + timeout = jiffies + mbox_ready_timeout * HZ; + do { + md_status = readq(cxlds->regs.memdev + CXLMDEV_STATUS_OFFSET); + if (md_status & CXLMDEV_MBOX_IF_READY) + break; + if (msleep_interruptible(100)) + break; + } while (!time_after(jiffies, timeout)); + + if (!(md_status & CXLMDEV_MBOX_IF_READY)) { + dev_err(cxlds->dev, + "timeout awaiting mailbox ready, device state:%s%s\n", + md_status & CXLMDEV_DEV_FATAL ? " fatal" : "", + md_status & CXLMDEV_FW_HALT ? " firmware-halt" : ""); + return -EIO; + } cxlds->mbox_send = cxl_pci_mbox_send; cxlds->payload_size = |