Merge tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the bit set of char/misc drivers for 4.19-rc1

  There is a lot here, much more than normal, seems like everyone is
  writing new driver subsystems these days... Anyway, major things here
  are:

   - new FSI driver subsystem, yet-another-powerpc low-level hardware
     bus

   - gnss, finally an in-kernel GPS subsystem to try to tame all of the
     crazy out-of-tree drivers that have been floating around for years,
     combined with some really hacky userspace implementations. This is
     only for GNSS receivers, but you have to start somewhere, and this
     is great to see.

  Other than that, there are new slimbus drivers, new coresight drivers,
  new fpga drivers, and loads of DT bindings for all of these and
  existing drivers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
  android: binder: Rate-limit debug and userspace triggered err msgs
  fsi: sbefifo: Bump max command length
  fsi: scom: Fix NULL dereference
  misc: mic: SCIF Fix scif_get_new_port() error handling
  misc: cxl: changed asterisk position
  genwqe: card_base: Use true and false for boolean values
  misc: eeprom: assignment outside the if statement
  uio: potential double frees if __uio_register_device() fails
  eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency
  misc: ti-st: Fix memory leak in the error path of probe()
  android: binder: Show extra_buffers_size in trace
  firmware: vpd: Fix section enabled flag on vpd_section_destroy
  platform: goldfish: Retire pdev_bus
  goldfish: Use dedicated macros instead of manual bit shifting
  goldfish: Add missing includes to goldfish.h
  mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
  dt-bindings: mux: add adi,adgs1408
  Drivers: hv: vmbus: Cleanup synic memory free path
  Drivers: hv: vmbus: Remove use of slow_virt_to_phys()
  Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()
  ...

1 files changed, 157 insertions, 0 deletions

diff --git a/drivers/fsi/cf-fsi-fw.h b/drivers/fsi/cf-fsi-fw.h
new file mode 100644
index 000000000000..712df0461911
--- /dev/null
+++ b/drivers/fsi/cf-fsi-fw.h
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0+
+#ifndef __CF_FSI_FW_H
+#define __CF_FSI_FW_H
+
+/*
+ * uCode file layout
+ *
+ * 0000...03ff : m68k exception vectors
+ * 0400...04ff : Header info & boot config block
+ * 0500....... : Code & stack
+ */
+
+/*
+ * Header info & boot config area
+ *
+ * The Header info is built into the ucode and provide version and
+ * platform information.
+ *
+ * the Boot config needs to be adjusted by the ARM prior to starting
+ * the ucode if the Command/Status area isn't at 0x320000 in CF space
+ * (ie. beginning of SRAM).
+ */
+
+#define HDR_OFFSET	        0x400
+
+/* Info: Signature & version */
+#define HDR_SYS_SIG		0x00	/* 2 bytes system signature */
+#define  SYS_SIG_SHARED		0x5348
+#define  SYS_SIG_SPLIT		0x5350
+#define HDR_FW_VERS		0x02	/* 2 bytes Major.Minor */
+#define HDR_API_VERS		0x04	/* 2 bytes Major.Minor */
+#define  API_VERSION_MAJ	2	/* Current version */
+#define  API_VERSION_MIN	1
+#define HDR_FW_OPTIONS		0x08	/* 4 bytes option flags */
+#define  FW_OPTION_TRACE_EN	0x00000001	/* FW tracing enabled */
+#define	 FW_OPTION_CONT_CLOCK	0x00000002	/* Continuous clocking supported */
+#define HDR_FW_SIZE		0x10	/* 4 bytes size for combo image */
+
+/* Boot Config: Address of Command/Status area */
+#define HDR_CMD_STAT_AREA	0x80	/* 4 bytes CF address */
+#define HDR_FW_CONTROL		0x84	/* 4 bytes control flags */
+#define	 FW_CONTROL_CONT_CLOCK	0x00000002	/* Continuous clocking enabled */
+#define	 FW_CONTROL_DUMMY_RD	0x00000004	/* Extra dummy read (AST2400) */
+#define	 FW_CONTROL_USE_STOP	0x00000008	/* Use STOP instructions */
+#define HDR_CLOCK_GPIO_VADDR	0x90	/* 2 bytes offset from GPIO base */
+#define HDR_CLOCK_GPIO_DADDR	0x92	/* 2 bytes offset from GPIO base */
+#define HDR_DATA_GPIO_VADDR	0x94	/* 2 bytes offset from GPIO base */
+#define HDR_DATA_GPIO_DADDR	0x96	/* 2 bytes offset from GPIO base */
+#define HDR_TRANS_GPIO_VADDR	0x98	/* 2 bytes offset from GPIO base */
+#define HDR_TRANS_GPIO_DADDR	0x9a	/* 2 bytes offset from GPIO base */
+#define HDR_CLOCK_GPIO_BIT	0x9c	/* 1 byte bit number */
+#define HDR_DATA_GPIO_BIT	0x9d	/* 1 byte bit number */
+#define HDR_TRANS_GPIO_BIT	0x9e	/* 1 byte bit number */
+
+/*
+ *  Command/Status area layout: Main part
+ */
+
+/* Command/Status register:
+ *
+ * +---------------------------+
+ * | STAT | RLEN | CLEN | CMD  |
+ * |   8  |   8  |   8  |   8  |
+ * +---------------------------+
+ *    |       |      |      |
+ *    status  |      |      |
+ * Response len      |      |
+ * (in bits)         |      |
+ *                   |      |
+ *         Command len      |
+ *         (in bits)        |
+ *                          |
+ *               Command code
+ *
+ * Due to the big endian layout, that means that a byte read will
+ * return the status byte
+ */
+#define	CMD_STAT_REG	        0x00
+#define  CMD_REG_CMD_MASK	0x000000ff
+#define  CMD_REG_CMD_SHIFT	0
+#define	  CMD_NONE		0x00
+#define	  CMD_COMMAND		0x01
+#define	  CMD_BREAK		0x02
+#define	  CMD_IDLE_CLOCKS	0x03 /* clen = #clocks */
+#define   CMD_INVALID		0xff
+#define  CMD_REG_CLEN_MASK	0x0000ff00
+#define  CMD_REG_CLEN_SHIFT	8
+#define  CMD_REG_RLEN_MASK	0x00ff0000
+#define  CMD_REG_RLEN_SHIFT	16
+#define  CMD_REG_STAT_MASK	0xff000000
+#define  CMD_REG_STAT_SHIFT	24
+#define	  STAT_WORKING		0x00
+#define	  STAT_COMPLETE		0x01
+#define	  STAT_ERR_INVAL_CMD	0x80
+#define	  STAT_ERR_INVAL_IRQ	0x81
+#define	  STAT_ERR_MTOE		0x82
+
+/* Response tag & CRC */
+#define	STAT_RTAG		0x04
+
+/* Response CRC */
+#define	STAT_RCRC		0x05
+
+/* Echo and Send delay */
+#define	ECHO_DLY_REG		0x08
+#define	SEND_DLY_REG		0x09
+
+/* Command data area
+ *
+ * Last byte of message must be left aligned
+ */
+#define	CMD_DATA		0x10 /* 64 bit of data */
+
+/* Response data area, right aligned, unused top bits are 1 */
+#define	RSP_DATA		0x20 /* 32 bit of data */
+
+/* Misc */
+#define	INT_CNT			0x30 /* 32-bit interrupt count */
+#define	BAD_INT_VEC		0x34 /* 32-bit bad interrupt vector # */
+#define	CF_STARTED		0x38 /* byte, set to -1 when copro started */
+#define	CLK_CNT			0x3c /* 32-bit, clock count (debug only) */
+
+/*
+ *  SRAM layout: GPIO arbitration part
+ */
+#define ARB_REG			0x40
+#define  ARB_ARM_REQ		0x01
+#define  ARB_ARM_ACK		0x02
+
+/* Misc2 */
+#define CF_RESET_D0		0x50
+#define CF_RESET_D1		0x54
+#define BAD_INT_S0		0x58
+#define BAD_INT_S1		0x5c
+#define STOP_CNT		0x60
+
+/* Internal */
+
+/*
+ * SRAM layout: Trace buffer (debug builds only)
+ */
+#define	TRACEBUF		0x100
+#define	  TR_CLKOBIT0		0xc0
+#define	  TR_CLKOBIT1		0xc1
+#define	  TR_CLKOSTART		0x82
+#define	  TR_OLEN		0x83 /* + len */
+#define	  TR_CLKZ		0x84 /* + count */
+#define	  TR_CLKWSTART		0x85
+#define	  TR_CLKTAG		0x86 /* + tag */
+#define	  TR_CLKDATA		0x87 /* + len */
+#define	  TR_CLKCRC		0x88 /* + raw crc */
+#define	  TR_CLKIBIT0		0x90
+#define	  TR_CLKIBIT1		0x91
+#define	  TR_END		0xff
+
+#endif /* __CF_FSI_FW_H */
+