Merge tag 'gpio-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the big slew of GPIO changes for the v5.3 kernel cycle. This
  is mostly incremental work this time.

  Three important things:

   - The FMC subsystem is deleted through my tree. This happens through
     GPIO as its demise was discussed in relation to a patch decoupling
     its GPIO implementation from the standard way of handling GPIO. As
     it turns out, that is not the only subsystem it reimplements and
     the authors think it is better do scratch it and start over using
     the proper kernel subsystems than try to polish the rust shiny. See
     the commit (ACKed by the maintainers) for details.

   - Arnd made a small devres patch that was ACKed by Greg and goes into
     the device core.

   - SPDX header change colissions may happen, because at times I've
     seen that quite a lot changed during the -rc:s in regards to SPDX.
     (It is good stuff, tglx has me convinced, and it is worth the
     occasional pain.)

  Apart from this is is nothing controversial or problematic.

  Summary:

  Core:

   - When a gpio_chip request GPIOs from itself, it can now fully
     control the line characteristics, both machine and consumer flags.
     This makes a lot of sense, but took some time before I figured out
     that this is how it has to work.

   - Several smallish documentation fixes.

  New drivers:

   - The PCA953x driver now supports the TI TCA9539.

   - The DaVinci driver now supports the K3 AM654 SoCs.

  Driver improvements:

   - Major overhaul and hardening of the OMAP driver by Russell King.

   - Starting to move some drivers to the new API passing irq_chip along
     with the gpio_chip when adding the gpio_chip instead of adding it
     separately.

  Unrelated:

   - Delete the FMC subsystem"

* tag 'gpio-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits)
  Revert "gpio: tegra: Clean-up debugfs initialisation"
  gpiolib: Use spinlock_t instead of struct spinlock
  gpio: stp-xway: allow compile-testing
  gpio: stp-xway: get rid of the #include <lantiq_soc.h> dependency
  gpio: stp-xway: improve module clock error handling
  gpio: stp-xway: simplify error handling in xway_stp_probe()
  gpiolib: Clarify use of non-sleeping functions
  gpiolib: Fix references to gpiod_[gs]et_*value_cansleep() variants
  gpiolib: Document new gpio_chip.init_valid_mask field
  Documentation: gpio: Fix reference to gpiod_get_array()
  gpio: pl061: drop duplicate printing of device name
  gpio: altera: Pass irqchip when adding gpiochip
  gpio: siox: Use devm_ managed gpiochip
  gpio: siox: Add struct device *dev helper variable
  gpio: siox: Pass irqchip when adding gpiochip
  drivers: gpio: amd-fch: make resource struct const
  devres: allow const resource arguments
  gpio: ath79: Pass irqchip when adding gpiochip
  gpio: tegra: Clean-up debugfs initialisation
  gpio: siox: Switch to IRQ_TYPE_NONE
  ...

1 files changed, 43 insertions, 45 deletions

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index e013d417a936..47a67c4deed4 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1644,39 +1644,47 @@ EXPORT_SYMBOL_GPL(gpiochip_irqchip_irq_valid);
 
 /**
  * gpiochip_set_cascaded_irqchip() - connects a cascaded irqchip to a gpiochip
- * @gpiochip: the gpiochip to set the irqchip chain to
+ * @gc: the gpiochip to set the irqchip chain to
  * @parent_irq: the irq number corresponding to the parent IRQ for this
  * chained irqchip
  * @parent_handler: the parent interrupt handler for the accumulated IRQ
  * coming out of the gpiochip. If the interrupt is nested rather than
  * cascaded, pass NULL in this handler argument
  */
-static void gpiochip_set_cascaded_irqchip(struct gpio_chip *gpiochip,
+static void gpiochip_set_cascaded_irqchip(struct gpio_chip *gc,
 					  unsigned int parent_irq,
 					  irq_flow_handler_t parent_handler)
 {
-	if (!gpiochip->irq.domain) {
-		chip_err(gpiochip, "called %s before setting up irqchip\n",
+	struct gpio_irq_chip *girq = &gc->irq;
+	struct device *dev = &gc->gpiodev->dev;
+
+	if (!girq->domain) {
+		chip_err(gc, "called %s before setting up irqchip\n",
 			 __func__);
 		return;
 	}
 
 	if (parent_handler) {
-		if (gpiochip->can_sleep) {
-			chip_err(gpiochip,
+		if (gc->can_sleep) {
+			chip_err(gc,
 				 "you cannot have chained interrupts on a chip that may sleep\n");
 			return;
 		}
+		girq->parents = devm_kcalloc(dev, 1,
+					     sizeof(*girq->parents),
+					     GFP_KERNEL);
+		if (!girq->parents) {
+			chip_err(gc, "out of memory allocating parent IRQ\n");
+			return;
+		}
+		girq->parents[0] = parent_irq;
+		girq->num_parents = 1;
 		/*
 		 * The parent irqchip is already using the chip_data for this
 		 * irqchip, so our callbacks simply use the handler_data.
 		 */
 		irq_set_chained_handler_and_data(parent_irq, parent_handler,
-						 gpiochip);
-
-		gpiochip->irq.parent_irq = parent_irq;
-		gpiochip->irq.parents = &gpiochip->irq.parent_irq;
-		gpiochip->irq.num_parents = 1;
+						 gc);
 	}
 }
 
@@ -2503,7 +2511,11 @@ EXPORT_SYMBOL_GPL(gpiochip_is_requested);
  * @chip: GPIO chip
  * @hwnum: hardware number of the GPIO for which to request the descriptor
  * @label: label for the GPIO
- * @flags: flags for this GPIO or 0 if default
+ * @lflags: lookup flags for this GPIO or 0 if default, this can be used to
+ * specify things like line inversion semantics with the machine flags
+ * such as GPIO_OUT_LOW
+ * @dflags: descriptor request flags for this GPIO or 0 if default, this
+ * can be used to specify consumer semantics such as open drain
  *
  * Function allows GPIO chip drivers to request and use their own GPIO
  * descriptors via gpiolib API. Difference to gpiod_request() is that this
@@ -2517,9 +2529,9 @@ EXPORT_SYMBOL_GPL(gpiochip_is_requested);
  */
 struct gpio_desc *gpiochip_request_own_desc(struct gpio_chip *chip, u16 hwnum,
 					    const char *label,
-					    enum gpiod_flags flags)
+					    enum gpio_lookup_flags lflags,
+					    enum gpiod_flags dflags)
 {
-	unsigned long lflags = GPIO_LOOKUP_FLAGS_DEFAULT;
 	struct gpio_desc *desc = gpiochip_get_desc(chip, hwnum);
 	int err;
 
@@ -2532,7 +2544,7 @@ struct gpio_desc *gpiochip_request_own_desc(struct gpio_chip *chip, u16 hwnum,
 	if (err < 0)
 		return ERR_PTR(err);
 
-	err = gpiod_configure_flags(desc, label, lflags, flags);
+	err = gpiod_configure_flags(desc, label, lflags, dflags);
 	if (err) {
 		chip_err(chip, "setup of own GPIO %s failed\n", label);
 		gpiod_free_commit(desc);
@@ -3019,13 +3031,13 @@ int gpiod_get_array_value_complex(bool raw, bool can_sleep,
  * Return the GPIO's raw value, i.e. the value of the physical line disregarding
  * its ACTIVE_LOW status, or negative errno on failure.
  *
- * This function should be called from contexts where we cannot sleep, and will
+ * This function can be called from contexts where we cannot sleep, and will
  * complain if the GPIO chip functions potentially sleep.
  */
 int gpiod_get_raw_value(const struct gpio_desc *desc)
 {
 	VALIDATE_DESC(desc);
-	/* Should be using gpio_get_value_cansleep() */
+	/* Should be using gpiod_get_raw_value_cansleep() */
 	WARN_ON(desc->gdev->chip->can_sleep);
 	return gpiod_get_raw_value_commit(desc);
 }
@@ -3038,7 +3050,7 @@ EXPORT_SYMBOL_GPL(gpiod_get_raw_value);
  * Return the GPIO's logical value, i.e. taking the ACTIVE_LOW status into
  * account, or negative errno on failure.
  *
- * This function should be called from contexts where we cannot sleep, and will
+ * This function can be called from contexts where we cannot sleep, and will
  * complain if the GPIO chip functions potentially sleep.
  */
 int gpiod_get_value(const struct gpio_desc *desc)
@@ -3046,7 +3058,7 @@ int gpiod_get_value(const struct gpio_desc *desc)
 	int value;
 
 	VALIDATE_DESC(desc);
-	/* Should be using gpio_get_value_cansleep() */
+	/* Should be using gpiod_get_value_cansleep() */
 	WARN_ON(desc->gdev->chip->can_sleep);
 
 	value = gpiod_get_raw_value_commit(desc);
@@ -3071,7 +3083,7 @@ EXPORT_SYMBOL_GPL(gpiod_get_value);
  * without regard for their ACTIVE_LOW status.  Return 0 in case of success,
  * else an error code.
  *
- * This function should be called from contexts where we cannot sleep,
+ * This function can be called from contexts where we cannot sleep,
  * and it will complain if the GPIO chip functions potentially sleep.
  */
 int gpiod_get_raw_array_value(unsigned int array_size,
@@ -3097,7 +3109,7 @@ EXPORT_SYMBOL_GPL(gpiod_get_raw_array_value);
  * Read the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status
  * into account.  Return 0 in case of success, else an error code.
  *
- * This function should be called from contexts where we cannot sleep,
+ * This function can be called from contexts where we cannot sleep,
  * and it will complain if the GPIO chip functions potentially sleep.
  */
 int gpiod_get_array_value(unsigned int array_size,
@@ -3311,13 +3323,13 @@ int gpiod_set_array_value_complex(bool raw, bool can_sleep,
  * Set the raw value of the GPIO, i.e. the value of its physical line without
  * regard for its ACTIVE_LOW status.
  *
- * This function should be called from contexts where we cannot sleep, and will
+ * This function can be called from contexts where we cannot sleep, and will
  * complain if the GPIO chip functions potentially sleep.
  */
 void gpiod_set_raw_value(struct gpio_desc *desc, int value)
 {
 	VALIDATE_DESC_VOID(desc);
-	/* Should be using gpiod_set_value_cansleep() */
+	/* Should be using gpiod_set_raw_value_cansleep() */
 	WARN_ON(desc->gdev->chip->can_sleep);
 	gpiod_set_raw_value_commit(desc, value);
 }
@@ -3352,12 +3364,13 @@ static void gpiod_set_value_nocheck(struct gpio_desc *desc, int value)
  * Set the logical value of the GPIO, i.e. taking its ACTIVE_LOW,
  * OPEN_DRAIN and OPEN_SOURCE flags into account.
  *
- * This function should be called from contexts where we cannot sleep, and will
+ * This function can be called from contexts where we cannot sleep, and will
  * complain if the GPIO chip functions potentially sleep.
  */
 void gpiod_set_value(struct gpio_desc *desc, int value)
 {
 	VALIDATE_DESC_VOID(desc);
+	/* Should be using gpiod_set_value_cansleep() */
 	WARN_ON(desc->gdev->chip->can_sleep);
 	gpiod_set_value_nocheck(desc, value);
 }
@@ -3373,7 +3386,7 @@ EXPORT_SYMBOL_GPL(gpiod_set_value);
  * Set the raw values of the GPIOs, i.e. the values of the physical lines
  * without regard for their ACTIVE_LOW status.
  *
- * This function should be called from contexts where we cannot sleep, and will
+ * This function can be called from contexts where we cannot sleep, and will
  * complain if the GPIO chip functions potentially sleep.
  */
 int gpiod_set_raw_array_value(unsigned int array_size,
@@ -3398,7 +3411,7 @@ EXPORT_SYMBOL_GPL(gpiod_set_raw_array_value);
  * Set the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status
  * into account.
  *
- * This function should be called from contexts where we cannot sleep, and will
+ * This function can be called from contexts where we cannot sleep, and will
  * complain if the GPIO chip functions potentially sleep.
  */
 int gpiod_set_array_value(unsigned int array_size,
@@ -4420,15 +4433,8 @@ int gpiod_hog(struct gpio_desc *desc, const char *name,
 	chip = gpiod_to_chip(desc);
 	hwnum = gpio_chip_hwgpio(desc);
 
-	/*
-	 * FIXME: not very elegant that we call gpiod_configure_flags()
-	 * twice here (once inside gpiochip_request_own_desc() and
-	 * again here), but the gpiochip_request_own_desc() is external
-	 * and cannot really pass the lflags so this is the lesser evil
-	 * at the moment. Pass zero as dflags on this first call so we
-	 * don't screw anything up.
-	 */
-	local_desc = gpiochip_request_own_desc(chip, hwnum, name, 0);
+	local_desc = gpiochip_request_own_desc(chip, hwnum, name,
+					       lflags, dflags);
 	if (IS_ERR(local_desc)) {
 		status = PTR_ERR(local_desc);
 		pr_err("requesting hog GPIO %s (chip %s, offset %d) failed, %d\n",
@@ -4436,14 +4442,6 @@ int gpiod_hog(struct gpio_desc *desc, const char *name,
 		return status;
 	}
 
-	status = gpiod_configure_flags(desc, name, lflags, dflags);
-	if (status < 0) {
-		pr_err("setup of hog GPIO %s (chip %s, offset %d) failed, %d\n",
-		       name, chip->label, hwnum, status);
-		gpiochip_free_own_desc(desc);
-		return status;
-	}
-
 	/* Mark GPIO as hogged so it can be identified and removed later */
 	set_bit(FLAG_IS_HOGGED, &desc->flags);
 
@@ -4805,8 +4803,8 @@ static const struct file_operations gpiolib_operations = {
 static int __init gpiolib_debugfs_init(void)
 {
 	/* /sys/kernel/debug/gpio */
-	(void) debugfs_create_file("gpio", S_IFREG | S_IRUGO,
-				NULL, NULL, &gpiolib_operations);
+	debugfs_create_file("gpio", S_IFREG | S_IRUGO, NULL, NULL,
+			    &gpiolib_operations);
 	return 0;
 }
 subsys_initcall(gpiolib_debugfs_init);