Merge tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "This has two exciting community drivers for ARM Mali accelerators.
  Since ARM has never been open source friendly on the GPU side of the
  house, the community has had to create open source drivers for the
  Mali GPUs. Lima covers the older t4xx and panfrost the newer 6xx/7xx
  series. Well done to all involved and hopefully this will help ARM
  head in the right direction.

  There is also now the ability if you don't have any of the legacy
  drivers enabled (pre-KMS) to remove all the pre-KMS support code from
  the core drm, this saves 10% or so in codesize on my machine.

  i915 also enable Icelake/Elkhart Lake Gen11 GPUs by default, vboxvideo
  moves out of staging.

  There are also some rcar-du patches which crossover with media tree
  but all should be acked by Mauro.

  Summary:

  uapi changes:
   - Colorspace connector property
   - fourcc - new YUV formts
   - timeline sync objects initially merged
   - expose FB_DAMAGE_CLIPS to atomic userspace

  new drivers:
   - vboxvideo: moved out of staging
   - aspeed: ASPEED SoC BMC chip display support
   - lima: ARM Mali4xx GPU acceleration driver support
   - panfrost: ARM Mali6xx/7xx Midgard/Bitfrost acceleration driver support

  core:
   - component helper docs
   - unplugging fixes
   - devm device init
   - MIPI/DSI rate control
   - shmem backed gem objects
   - connector, display_info, edid_quirks cleanups
   - dma_buf fence chain support
   - 64-bit dma-fence seqno comparison fixes
   - move initial fb config code to core
   - gem fence array helpers for Lima
   - ability to remove legacy support code if no drivers requires it (removes 10% of drm.ko size)
   - lease fixes

  ttm:
   - unified DRM_FILE_PAGE_OFFSET handling
   - Account for kernel allocations in kernel zone only

  panel:
   - OSD070T1718-19TS panel support
   - panel-tpo-td028ttec1 backlight support
   - Ronbo RB070D30 MIPI/DSI
   - Feiyang FY07024DI26A30-D MIPI-DSI panel
   - Rocktech jh057n00900 MIPI-DSI panel

  i915:
   - Comet Lake (Gen9) PCI IDs
   - Updated Icelake PCI IDs
   - Elkhartlake (Gen11) support
   - DP MST property addtions
   - plane and watermark fixes
   - Icelake port sync and VEBOX disable fixes
   - struct_mutex usage reduction
   - Icelake gamma fix
   - GuC reset fixes
   - make mmap more asynchronous
   - sound display power well race fixes
   - DDI/MIPI-DSI clocks for Icelake
   - Icelake RPS frequency changing support
   - Icelake workarounds

  amdgpu:
   - Use HMM for userptr
   - vega20 experimental smu11 support
   - RAS support for vega20
   - BACO support for vega12 + fixes for vega20
   - reworked IH interrupt handling
   - amdkfd RAS support
   - Freesync improvements
   - initial timeline sync object support
   - DC Z ordering fixes
   - NV12 planes support
   - colorspace properties for planes=
   - eDP opts if eDP already initialized

  nouveau:
   - misc fixes

  etnaviv:
   - misc fixes

  msm:
   - GPU zap shader support expansion
   - robustness ABI addition

  exynos:
   - Logging cleanups

  tegra:
   - Shared reset fix
   - CPU cache maintenance fix

  cirrus:
   - driver rewritten using simple helpers

  meson:
   - G12A support

  vmwgfx:
   - Resource dirtying management improvements
   - Userspace logging improvements

  virtio:
   - PRIME fixes

  rockchip:
   - rk3066 hdmi support

  sun4i:
   - DSI burst mode support

  vc4:
   - load tracker to detect underflow

  v3d:
   - v3d v4.2 support

  malidp:
   - initial Mali D71 support in komeda driver

  tfp410:
   - omap related improvement

  omapdrm:
   - drm bridge/panel support
   - drop some omap specific panels

  rcar-du:
   - Display writeback support"

* tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm: (1507 commits)
  drm/msm/a6xx: No zap shader is not an error
  drm/cma-helper: Fix drm_gem_cma_free_object()
  drm: Fix timestamp docs for variable refresh properties.
  drm/komeda: Mark the local functions as static
  drm/komeda: Fixed warning: Function parameter or member not described
  drm/komeda: Expose bus_width to Komeda-CORE
  drm/komeda: Add sysfs attribute: core_id and config_id
  drm: add non-desktop quirk for Valve HMDs
  drm/panfrost: Show stored feature registers
  drm/panfrost: Don't scream about deferred probe
  drm/panfrost: Disable PM on probe failure
  drm/panfrost: Set DMA masks earlier
  drm/panfrost: Add sanity checks to submit IOCTL
  drm/etnaviv: initialize idle mask before querying the HW db
  drm: introduce a capability flag for syncobj timeline support
  drm: report consistent errors when checking syncobj capibility
  drm/nouveau/nouveau: forward error generated while resuming objects tree
  drm/nouveau/fb/ramgk104: fix spelling mistake "sucessfully" -> "successfully"
  drm/nouveau/i2c: Disable i2c bus access after ->fini()
  drm/nouveau: Remove duplicate ACPI_VIDEO_NOTIFY_PROBE definition
  ...

1 files changed, 84 insertions, 97 deletions

diff --git a/drivers/gpu/drm/omapdrm/omap_connector.c b/drivers/gpu/drm/omapdrm/omap_connector.c
index 9da94d10782a..5967283934e1 100644
--- a/drivers/gpu/drm/omapdrm/omap_connector.c
+++ b/drivers/gpu/drm/omapdrm/omap_connector.c
@@ -17,6 +17,7 @@
 
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_crtc.h>
+#include <drm/drm_panel.h>
 #include <drm/drm_probe_helper.h>
 
 #include "omap_drv.h"
@@ -30,24 +31,27 @@
 struct omap_connector {
 	struct drm_connector base;
 	struct omap_dss_device *output;
-	struct omap_dss_device *display;
 	struct omap_dss_device *hpd;
 	bool hdmi_mode;
 };
 
 static void omap_connector_hpd_notify(struct drm_connector *connector,
-				      struct omap_dss_device *src,
 				      enum drm_connector_status status)
 {
-	if (status == connector_status_disconnected) {
-		/*
-		 * If the source is an HDMI encoder, notify it of disconnection.
-		 * This is required to let the HDMI encoder reset any internal
-		 * state related to connection status, such as the CEC address.
-		 */
-		if (src && src->type == OMAP_DISPLAY_TYPE_HDMI &&
-		    src->ops->hdmi.lost_hotplug)
-			src->ops->hdmi.lost_hotplug(src);
+	struct omap_connector *omap_connector = to_omap_connector(connector);
+	struct omap_dss_device *dssdev;
+
+	if (status != connector_status_disconnected)
+		return;
+
+	/*
+	 * Notify all devics in the pipeline of disconnection. This is required
+	 * to let the HDMI encoders reset their internal state related to
+	 * connection status, such as the CEC address.
+	 */
+	for (dssdev = omap_connector->output; dssdev; dssdev = dssdev->next) {
+		if (dssdev->ops && dssdev->ops->hdmi.lost_hotplug)
+			dssdev->ops->hdmi.lost_hotplug(dssdev);
 	}
 }
 
@@ -67,7 +71,7 @@ static void omap_connector_hpd_cb(void *cb_data,
 	if (old_status == status)
 		return;
 
-	omap_connector_hpd_notify(connector, omap_connector->hpd, status);
+	omap_connector_hpd_notify(connector, status);
 
 	drm_kms_helper_hotplug_event(dev);
 }
@@ -103,20 +107,20 @@ omap_connector_find_device(struct drm_connector *connector,
 			   enum omap_dss_device_ops_flag op)
 {
 	struct omap_connector *omap_connector = to_omap_connector(connector);
-	struct omap_dss_device *dssdev;
+	struct omap_dss_device *dssdev = NULL;
+	struct omap_dss_device *d;
 
-	for (dssdev = omap_connector->display; dssdev; dssdev = dssdev->src) {
-		if (dssdev->ops_flags & op)
-			return dssdev;
+	for (d = omap_connector->output; d; d = d->next) {
+		if (d->ops_flags & op)
+			dssdev = d;
 	}
 
-	return NULL;
+	return dssdev;
 }
 
 static enum drm_connector_status omap_connector_detect(
 		struct drm_connector *connector, bool force)
 {
-	struct omap_connector *omap_connector = to_omap_connector(connector);
 	struct omap_dss_device *dssdev;
 	enum drm_connector_status status;
 
@@ -128,13 +132,12 @@ static enum drm_connector_status omap_connector_detect(
 		       ? connector_status_connected
 		       : connector_status_disconnected;
 
-		omap_connector_hpd_notify(connector, dssdev->src, status);
+		omap_connector_hpd_notify(connector, status);
 	} else {
-		switch (omap_connector->display->type) {
-		case OMAP_DISPLAY_TYPE_DPI:
-		case OMAP_DISPLAY_TYPE_DBI:
-		case OMAP_DISPLAY_TYPE_SDI:
-		case OMAP_DISPLAY_TYPE_DSI:
+		switch (connector->connector_type) {
+		case DRM_MODE_CONNECTOR_DPI:
+		case DRM_MODE_CONNECTOR_LVDS:
+		case DRM_MODE_CONNECTOR_DSI:
 			status = connector_status_connected;
 			break;
 		default:
@@ -143,7 +146,7 @@ static enum drm_connector_status omap_connector_detect(
 		}
 	}
 
-	VERB("%s: %d (force=%d)", omap_connector->display->name, status, force);
+	VERB("%s: %d (force=%d)", connector->name, status, force);
 
 	return status;
 }
@@ -152,7 +155,7 @@ static void omap_connector_destroy(struct drm_connector *connector)
 {
 	struct omap_connector *omap_connector = to_omap_connector(connector);
 
-	DBG("%s", omap_connector->display->name);
+	DBG("%s", connector->name);
 
 	if (omap_connector->hpd) {
 		struct omap_dss_device *hpd = omap_connector->hpd;
@@ -166,7 +169,6 @@ static void omap_connector_destroy(struct drm_connector *connector)
 	drm_connector_cleanup(connector);
 
 	omapdss_device_put(omap_connector->output);
-	omapdss_device_put(omap_connector->display);
 
 	kfree(omap_connector);
 }
@@ -212,10 +214,8 @@ static int omap_connector_get_modes(struct drm_connector *connector)
 {
 	struct omap_connector *omap_connector = to_omap_connector(connector);
 	struct omap_dss_device *dssdev;
-	struct drm_display_mode *mode;
-	struct videomode vm = {0};
 
-	DBG("%s", omap_connector->display->name);
+	DBG("%s", connector->name);
 
 	/*
 	 * If display exposes EDID, then we parse that in the normal way to
@@ -227,89 +227,71 @@ static int omap_connector_get_modes(struct drm_connector *connector)
 		return omap_connector_get_modes_edid(connector, dssdev);
 
 	/*
-	 * Otherwise we have either a fixed resolution panel or an output that
-	 * doesn't support modes discovery (e.g. DVI or VGA with the DDC bus
-	 * unconnected, or analog TV). Start by querying the size.
+	 * Otherwise if the display pipeline reports modes (e.g. with a fixed
+	 * resolution panel or an analog TV output), query it.
 	 */
-	dssdev = omap_connector->display;
-	if (dssdev->driver && dssdev->driver->get_size)
-		dssdev->driver->get_size(dssdev,
-					 &connector->display_info.width_mm,
-					 &connector->display_info.height_mm);
+	dssdev = omap_connector_find_device(connector,
+					    OMAP_DSS_DEVICE_OP_MODES);
+	if (dssdev)
+		return dssdev->ops->get_modes(dssdev, connector);
 
 	/*
-	 * Iterate over the pipeline to find the first device that can provide
-	 * timing information. If we can't find any, we just let the KMS core
-	 * add the default modes.
+	 * Otherwise if the display pipeline uses a drm_panel, we delegate the
+	 * operation to the panel API.
 	 */
-	for (dssdev = omap_connector->display; dssdev; dssdev = dssdev->src) {
-		if (dssdev->ops->get_timings)
-			break;
-	}
-	if (!dssdev)
-		return 0;
+	if (omap_connector->output->panel)
+		return drm_panel_get_modes(omap_connector->output->panel);
 
-	/* Add a single mode corresponding to the fixed panel timings. */
-	mode = drm_mode_create(connector->dev);
-	if (!mode)
-		return 0;
+	/*
+	 * We can't retrieve modes, which can happen for instance for a DVI or
+	 * VGA output with the DDC bus unconnected. The KMS core will add the
+	 * default modes.
+	 */
+	return 0;
+}
 
-	dssdev->ops->get_timings(dssdev, &vm);
+enum drm_mode_status omap_connector_mode_fixup(struct omap_dss_device *dssdev,
+					const struct drm_display_mode *mode,
+					struct drm_display_mode *adjusted_mode)
+{
+	int ret;
 
-	drm_display_mode_from_videomode(&vm, mode);
+	drm_mode_copy(adjusted_mode, mode);
 
-	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
-	drm_mode_set_name(mode);
-	drm_mode_probed_add(connector, mode);
+	for (; dssdev; dssdev = dssdev->next) {
+		if (!dssdev->ops->check_timings)
+			continue;
+
+		ret = dssdev->ops->check_timings(dssdev, adjusted_mode);
+		if (ret)
+			return MODE_BAD;
+	}
 
-	return 1;
+	return MODE_OK;
 }
 
-static int omap_connector_mode_valid(struct drm_connector *connector,
+static enum drm_mode_status omap_connector_mode_valid(struct drm_connector *connector,
 				 struct drm_display_mode *mode)
 {
 	struct omap_connector *omap_connector = to_omap_connector(connector);
-	enum omap_channel channel = omap_connector->output->dispc_channel;
-	struct omap_drm_private *priv = connector->dev->dev_private;
-	struct omap_dss_device *dssdev;
-	struct videomode vm = {0};
-	struct drm_device *dev = connector->dev;
-	struct drm_display_mode *new_mode;
-	int r, ret = MODE_BAD;
-
-	drm_display_mode_to_videomode(mode, &vm);
-	mode->vrefresh = drm_mode_vrefresh(mode);
+	struct drm_display_mode new_mode = { { 0 } };
+	enum drm_mode_status status;
 
-	r = priv->dispc_ops->mgr_check_timings(priv->dispc, channel, &vm);
-	if (r)
+	status = omap_connector_mode_fixup(omap_connector->output, mode,
+					   &new_mode);
+	if (status != MODE_OK)
 		goto done;
 
-	for (dssdev = omap_connector->output; dssdev; dssdev = dssdev->next) {
-		if (!dssdev->ops->check_timings)
-			continue;
-
-		r = dssdev->ops->check_timings(dssdev, &vm);
-		if (r)
-			goto done;
-	}
-
-	/* check if vrefresh is still valid */
-	new_mode = drm_mode_duplicate(dev, mode);
-	if (!new_mode)
-		return MODE_BAD;
-
-	new_mode->clock = vm.pixelclock / 1000;
-	new_mode->vrefresh = 0;
-	if (mode->vrefresh == drm_mode_vrefresh(new_mode))
-		ret = MODE_OK;
-	drm_mode_destroy(dev, new_mode);
+	/* Check if vrefresh is still valid. */
+	if (drm_mode_vrefresh(mode) != drm_mode_vrefresh(&new_mode))
+		status = MODE_NOCLOCK;
 
 done:
 	DBG("connector: mode %s: " DRM_MODE_FMT,
-			(ret == MODE_OK) ? "valid" : "invalid",
+			(status == MODE_OK) ? "valid" : "invalid",
 			DRM_MODE_ARG(mode));
 
-	return ret;
+	return status;
 }
 
 static const struct drm_connector_funcs omap_connector_funcs = {
@@ -326,9 +308,16 @@ static const struct drm_connector_helper_funcs omap_connector_helper_funcs = {
 	.mode_valid = omap_connector_mode_valid,
 };
 
-static int omap_connector_get_type(struct omap_dss_device *display)
+static int omap_connector_get_type(struct omap_dss_device *output)
 {
-	switch (display->type) {
+	struct omap_dss_device *display;
+	enum omap_display_type type;
+
+	display = omapdss_display_get(output);
+	type = display->type;
+	omapdss_device_put(display);
+
+	switch (type) {
 	case OMAP_DISPLAY_TYPE_HDMI:
 		return DRM_MODE_CONNECTOR_HDMIA;
 	case OMAP_DISPLAY_TYPE_DVI:
@@ -351,28 +340,26 @@ static int omap_connector_get_type(struct omap_dss_device *display)
 /* initialize connector */
 struct drm_connector *omap_connector_init(struct drm_device *dev,
 					  struct omap_dss_device *output,
-					  struct omap_dss_device *display,
 					  struct drm_encoder *encoder)
 {
 	struct drm_connector *connector = NULL;
 	struct omap_connector *omap_connector;
 	struct omap_dss_device *dssdev;
 
-	DBG("%s", display->name);
+	DBG("%s", output->name);
 
 	omap_connector = kzalloc(sizeof(*omap_connector), GFP_KERNEL);
 	if (!omap_connector)
 		goto fail;
 
 	omap_connector->output = omapdss_device_get(output);
-	omap_connector->display = omapdss_device_get(display);
 
 	connector = &omap_connector->base;
 	connector->interlace_allowed = 1;
 	connector->doublescan_allowed = 0;
 
 	drm_connector_init(dev, connector, &omap_connector_funcs,
-			   omap_connector_get_type(display));
+			   omap_connector_get_type(output));
 	drm_connector_helper_add(connector, &omap_connector_helper_funcs);
 
 	/*