iio: magnetometer: separate the values of attributes based on their usage type for HID compass sensor

There are 2 usage types (Magnetic Flux and Heading data field) for HID
compass sensor, thus the values of offset, scale, and sensitivity should
be separated according to their respective usage type. The changes made
are as below:
1. Hysteresis: A struct hid_sensor_common rot_attributes is created in
struct magn_3d_state to contain the sensitivity for IIO_ROT.
2. Scale: scale_pre_decml and scale_post_decml are separated for IIO_MAGN
and IIO_ROT.
3. Offset: Same as scale, value_offset is separated for IIO_MAGN and
IIO_ROT.

For sensitivity, HID_USAGE_SENSOR_ORIENT_MAGN_FLUX and
HID_USAGE_SENSOR_ORIENT_MAGN_HEADING are used for sensivitity fields based
on the HID Sensor Usages specifications. Hence, these changes are added on
the sensitivity field.

Signed-off-by: Ooi, Joyce <joyce.ooi@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

1 files changed, 112 insertions, 35 deletions

diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
index d8a0c8da8db0..0e791b02ed4a 100644
--- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c
+++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
@@ -42,9 +42,17 @@ enum magn_3d_channel {
 	MAGN_3D_CHANNEL_MAX,
 };
 
+struct common_attributes {
+	int scale_pre_decml;
+	int scale_post_decml;
+	int scale_precision;
+	int value_offset;
+};
+
 struct magn_3d_state {
 	struct hid_sensor_hub_callbacks callbacks;
-	struct hid_sensor_common common_attributes;
+	struct hid_sensor_common magn_flux_attributes;
+	struct hid_sensor_common rot_attributes;
 	struct hid_sensor_hub_attribute_info magn[MAGN_3D_CHANNEL_MAX];
 
 	/* dynamically sized array to hold sensor values */
@@ -52,10 +60,8 @@ struct magn_3d_state {
 	/* array of pointers to sensor value */
 	u32 *magn_val_addr[MAGN_3D_CHANNEL_MAX];
 
-	int scale_pre_decml;
-	int scale_post_decml;
-	int scale_precision;
-	int value_offset;
+	struct common_attributes magn_flux_attr;
+	struct common_attributes rot_attr;
 };
 
 static const u32 magn_3d_addresses[MAGN_3D_CHANNEL_MAX] = {
@@ -162,41 +168,74 @@ static int magn_3d_read_raw(struct iio_dev *indio_dev,
 	*val2 = 0;
 	switch (mask) {
 	case 0:
-		hid_sensor_power_state(&magn_state->common_attributes, true);
+		hid_sensor_power_state(&magn_state->magn_flux_attributes, true);
 		report_id =
 			magn_state->magn[chan->address].report_id;
 		address = magn_3d_addresses[chan->address];
 		if (report_id >= 0)
 			*val = sensor_hub_input_attr_get_raw_value(
-				magn_state->common_attributes.hsdev,
+				magn_state->magn_flux_attributes.hsdev,
 				HID_USAGE_SENSOR_COMPASS_3D, address,
 				report_id,
 				SENSOR_HUB_SYNC);
 		else {
 			*val = 0;
-			hid_sensor_power_state(&magn_state->common_attributes,
-						false);
+			hid_sensor_power_state(
+				&magn_state->magn_flux_attributes,
+				false);
 			return -EINVAL;
 		}
-		hid_sensor_power_state(&magn_state->common_attributes, false);
+		hid_sensor_power_state(&magn_state->magn_flux_attributes,
+					false);
 		ret_type = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SCALE:
-		*val = magn_state->scale_pre_decml;
-		*val2 = magn_state->scale_post_decml;
-		ret_type = magn_state->scale_precision;
+		switch (chan->type) {
+		case IIO_MAGN:
+			*val = magn_state->magn_flux_attr.scale_pre_decml;
+			*val2 = magn_state->magn_flux_attr.scale_post_decml;
+			ret_type = magn_state->magn_flux_attr.scale_precision;
+			break;
+		case IIO_ROT:
+			*val = magn_state->rot_attr.scale_pre_decml;
+			*val2 = magn_state->rot_attr.scale_post_decml;
+			ret_type = magn_state->rot_attr.scale_precision;
+			break;
+		default:
+			ret_type = -EINVAL;
+		}
 		break;
 	case IIO_CHAN_INFO_OFFSET:
-		*val = magn_state->value_offset;
-		ret_type = IIO_VAL_INT;
+		switch (chan->type) {
+		case IIO_MAGN:
+			*val = magn_state->magn_flux_attr.value_offset;
+			ret_type = IIO_VAL_INT;
+			break;
+		case IIO_ROT:
+			*val = magn_state->rot_attr.value_offset;
+			ret_type = IIO_VAL_INT;
+			break;
+		default:
+			ret_type = -EINVAL;
+		}
 		break;
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		ret_type = hid_sensor_read_samp_freq_value(
-			&magn_state->common_attributes, val, val2);
+			&magn_state->magn_flux_attributes, val, val2);
 		break;
 	case IIO_CHAN_INFO_HYSTERESIS:
-		ret_type = hid_sensor_read_raw_hyst_value(
-			&magn_state->common_attributes, val, val2);
+		switch (chan->type) {
+		case IIO_MAGN:
+			ret_type = hid_sensor_read_raw_hyst_value(
+				&magn_state->magn_flux_attributes, val, val2);
+			break;
+		case IIO_ROT:
+			ret_type = hid_sensor_read_raw_hyst_value(
+				&magn_state->rot_attributes, val, val2);
+			break;
+		default:
+			ret_type = -EINVAL;
+		}
 		break;
 	default:
 		ret_type = -EINVAL;
@@ -219,11 +258,21 @@ static int magn_3d_write_raw(struct iio_dev *indio_dev,
 	switch (mask) {
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		ret = hid_sensor_write_samp_freq_value(
-				&magn_state->common_attributes, val, val2);
+				&magn_state->magn_flux_attributes, val, val2);
 		break;
 	case IIO_CHAN_INFO_HYSTERESIS:
-		ret = hid_sensor_write_raw_hyst_value(
-				&magn_state->common_attributes, val, val2);
+		switch (chan->type) {
+		case IIO_MAGN:
+			ret = hid_sensor_write_raw_hyst_value(
+				&magn_state->magn_flux_attributes, val, val2);
+			break;
+		case IIO_ROT:
+			ret = hid_sensor_write_raw_hyst_value(
+				&magn_state->rot_attributes, val, val2);
+			break;
+		default:
+			ret = -EINVAL;
+		}
 		break;
 	default:
 		ret = -EINVAL;
@@ -254,7 +303,7 @@ static int magn_3d_proc_event(struct hid_sensor_hub_device *hsdev,
 	struct magn_3d_state *magn_state = iio_priv(indio_dev);
 
 	dev_dbg(&indio_dev->dev, "magn_3d_proc_event\n");
-	if (atomic_read(&magn_state->common_attributes.data_ready))
+	if (atomic_read(&magn_state->magn_flux_attributes.data_ready))
 		hid_sensor_push_data(indio_dev, magn_state->iio_vals);
 
 	return 0;
@@ -389,21 +438,48 @@ static int magn_3d_parse_report(struct platform_device *pdev,
 	dev_dbg(&pdev->dev, "magn_3d Setup %d IIO channels\n",
 			*chan_count);
 
-	st->scale_precision = hid_sensor_format_scale(
+	st->magn_flux_attr.scale_precision = hid_sensor_format_scale(
 				HID_USAGE_SENSOR_COMPASS_3D,
 				&st->magn[CHANNEL_SCAN_INDEX_X],
-				&st->scale_pre_decml, &st->scale_post_decml);
+				&st->magn_flux_attr.scale_pre_decml,
+				&st->magn_flux_attr.scale_post_decml);
+	st->rot_attr.scale_precision
+		= hid_sensor_format_scale(
+			HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH,
+			&st->magn[CHANNEL_SCAN_INDEX_NORTH_MAGN_TILT_COMP],
+			&st->rot_attr.scale_pre_decml,
+			&st->rot_attr.scale_post_decml);
 
 	/* Set Sensitivity field ids, when there is no individual modifier */
-	if (st->common_attributes.sensitivity.index < 0) {
+	if (st->magn_flux_attributes.sensitivity.index < 0) {
 		sensor_hub_input_get_attribute_info(hsdev,
 			HID_FEATURE_REPORT, usage_id,
 			HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
 			HID_USAGE_SENSOR_DATA_ORIENTATION,
-			&st->common_attributes.sensitivity);
+			&st->magn_flux_attributes.sensitivity);
+		dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n",
+			st->magn_flux_attributes.sensitivity.index,
+			st->magn_flux_attributes.sensitivity.report_id);
+	}
+	if (st->magn_flux_attributes.sensitivity.index < 0) {
+		sensor_hub_input_get_attribute_info(hsdev,
+			HID_FEATURE_REPORT, usage_id,
+			HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
+			HID_USAGE_SENSOR_ORIENT_MAGN_FLUX,
+			&st->magn_flux_attributes.sensitivity);
+		dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n",
+			st->magn_flux_attributes.sensitivity.index,
+			st->magn_flux_attributes.sensitivity.report_id);
+	}
+	if (st->rot_attributes.sensitivity.index < 0) {
+		sensor_hub_input_get_attribute_info(hsdev,
+			HID_FEATURE_REPORT, usage_id,
+			HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
+			HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH,
+			&st->rot_attributes.sensitivity);
 		dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n",
-			st->common_attributes.sensitivity.index,
-			st->common_attributes.sensitivity.report_id);
+			st->rot_attributes.sensitivity.index,
+			st->rot_attributes.sensitivity.report_id);
 	}
 
 	return 0;
@@ -428,16 +504,17 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, indio_dev);
 
 	magn_state = iio_priv(indio_dev);
-	magn_state->common_attributes.hsdev = hsdev;
-	magn_state->common_attributes.pdev = pdev;
+	magn_state->magn_flux_attributes.hsdev = hsdev;
+	magn_state->magn_flux_attributes.pdev = pdev;
 
 	ret = hid_sensor_parse_common_attributes(hsdev,
 				HID_USAGE_SENSOR_COMPASS_3D,
-				&magn_state->common_attributes);
+				&magn_state->magn_flux_attributes);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to setup common attributes\n");
 		return ret;
 	}
+	magn_state->rot_attributes = magn_state->magn_flux_attributes;
 
 	ret = magn_3d_parse_report(pdev, hsdev,
 				&channels, &chan_count,
@@ -460,9 +537,9 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failed to initialize trigger buffer\n");
 		return ret;
 	}
-	atomic_set(&magn_state->common_attributes.data_ready, 0);
+	atomic_set(&magn_state->magn_flux_attributes.data_ready, 0);
 	ret = hid_sensor_setup_trigger(indio_dev, name,
-					&magn_state->common_attributes);
+					&magn_state->magn_flux_attributes);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "trigger setup failed\n");
 		goto error_unreg_buffer_funcs;
@@ -489,7 +566,7 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
 error_iio_unreg:
 	iio_device_unregister(indio_dev);
 error_remove_trigger:
-	hid_sensor_remove_trigger(&magn_state->common_attributes);
+	hid_sensor_remove_trigger(&magn_state->magn_flux_attributes);
 error_unreg_buffer_funcs:
 	iio_triggered_buffer_cleanup(indio_dev);
 	return ret;
@@ -504,7 +581,7 @@ static int hid_magn_3d_remove(struct platform_device *pdev)
 
 	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D);
 	iio_device_unregister(indio_dev);
-	hid_sensor_remove_trigger(&magn_state->common_attributes);
+	hid_sensor_remove_trigger(&magn_state->magn_flux_attributes);
 	iio_triggered_buffer_cleanup(indio_dev);
 
 	return 0;