Merge tag 'mmc-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "This time, this pull request contains changes crossing subsystems and
  archs/platforms, which is mainly because of a bigger modernization of
  moving from legacy GPIO to GPIO descriptors for MMC (by Linus
  Walleij).

  Additionally, once again, I am funneling changes to
  drivers/misc/cardreader/* and drivers/memstick/* through my MMC tree,
  mostly due to that we lack a maintainer for these.

  Summary:

  MMC core:
   - Cleanup BKOPS support
   - Introduce MMC_CAP_SYNC_RUNTIME_PM
   - slot-gpio: Delete legacy slot GPIO handling

  MMC host:
   - alcor: Add new mmc host driver for Alcor Micro PCI based cardreader
   - bcm2835: Several improvements to better recover from errors
   - jz4740: Rework and fixup pre|post_req support
   - mediatek: Add support for SDIO IRQs
   - meson-gx: Improve clock phase management
   - meson-gx: Stop descriptor on errors
   - mmci: Complete the sbc error path by sending a stop command
   - renesas_sdhi/tmio: Fixup reset/resume operations
   - renesas_sdhi: Add support for r8a774c0 and R7S9210
   - renesas_sdhi: Whitelist R8A77990 SDHI
   - renesas_sdhi: Fixup eMMC HS400 compatibility issues for H3 and M3-W
   - rtsx_usb_sdmmc: Re-work card detection/removal support
   - rtsx_usb_sdmmc: Re-work runtime PM support
   - sdhci: Fix timeout loops for some variant drivers
   - sdhci: Improve support for error handling due to failing commands
   - sdhci-acpi/pci: Disable LED control for Intel BYT-based controllers
   - sdhci_am654: Add new SDHCI variant driver to support TI's AM654 SOCs
   - sdhci-of-esdhc: Add support for eMMC HS400 mode
   - sdhci-omap: Fixup reset support
   - sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures
   - sdhci-msm: Fixup sporadic write transfers issues for SDR104/HS200
   - sdhci-msm: Fixup dynamical clock gating issues
   - various: Complete converting all hosts into using slot GPIO descriptors

  Other:
   - Move GPIO mmc platform data for mips/sh/arm to GPIO descriptors
   - Add new Alcor Micro cardreader PCI driver
   - Support runtime power management for memstick rtsx_usb_ms driver
   - Use USB remote wakeups for card detection for rtsx_usb misc driver"

* tag 'mmc-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (99 commits)
  mmc: mediatek: Add MMC_CAP_SDIO_IRQ support
  mmc: renesas_sdhi_internal_dmac: Whitelist r8a774c0
  dt-bindings: mmc: renesas_sdhi: Add r8a774c0 support
  mmc: core: Cleanup BKOPS support
  mmc: core: Drop redundant check in mmc_send_hpi_cmd()
  mmc: sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures (i929)
  dt-bindings: sdhci-omap: Add note for cpu_thermal
  mmc: sdhci-acpi: Disable LED control for Intel BYT-based controllers
  mmc: sdhci-pci: Disable LED control for Intel BYT-based controllers
  mmc: sdhci: Add quirk to disable LED control
  mmc: mmci: add variant property to set command stop bit
  misc: alcor_pci: fix spelling mistake "invailid" -> "invalid"
  mmc: meson-gx: add signal resampling
  mmc: meson-gx: align default phase on soc vendor tree
  mmc: meson-gx: remove useless lock
  mmc: meson-gx: make sure the descriptor is stopped on errors
  mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver
  dt-bindings: mmc: sdhci-of-arasan: Add deprecated message for AM65
  dt-bindings: mmc: sdhci-am654: Document bindings for the host controllers on TI's AM654 SOCs
  mmc: sdhci-msm: avoid unused function warning
  ...

1 files changed, 18 insertions, 75 deletions

diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 873b2aa0c155..9054329fe903 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -802,12 +802,6 @@ static int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status)
 	unsigned int opcode;
 	int err;
 
-	if (!card->ext_csd.hpi) {
-		pr_warn("%s: Card didn't support HPI command\n",
-			mmc_hostname(card->host));
-		return -EINVAL;
-	}
-
 	opcode = card->ext_csd.hpi_cmd;
 	if (opcode == MMC_STOP_TRANSMISSION)
 		cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
@@ -897,34 +891,6 @@ int mmc_can_ext_csd(struct mmc_card *card)
 	return (card && card->csd.mmca_vsn > CSD_SPEC_VER_3);
 }
 
-/**
- *	mmc_stop_bkops - stop ongoing BKOPS
- *	@card: MMC card to check BKOPS
- *
- *	Send HPI command to stop ongoing background operations to
- *	allow rapid servicing of foreground operations, e.g. read/
- *	writes. Wait until the card comes out of the programming state
- *	to avoid errors in servicing read/write requests.
- */
-int mmc_stop_bkops(struct mmc_card *card)
-{
-	int err = 0;
-
-	err = mmc_interrupt_hpi(card);
-
-	/*
-	 * If err is EINVAL, we can't issue an HPI.
-	 * It should complete the BKOPS.
-	 */
-	if (!err || (err == -EINVAL)) {
-		mmc_card_clr_doing_bkops(card);
-		mmc_retune_release(card->host);
-		err = 0;
-	}
-
-	return err;
-}
-
 static int mmc_read_bkops_status(struct mmc_card *card)
 {
 	int err;
@@ -941,22 +907,17 @@ static int mmc_read_bkops_status(struct mmc_card *card)
 }
 
 /**
- *	mmc_start_bkops - start BKOPS for supported cards
- *	@card: MMC card to start BKOPS
- *	@from_exception: A flag to indicate if this function was
- *			 called due to an exception raised by the card
+ *	mmc_run_bkops - Run BKOPS for supported cards
+ *	@card: MMC card to run BKOPS for
  *
- *	Start background operations whenever requested.
- *	When the urgent BKOPS bit is set in a R1 command response
- *	then background operations should be started immediately.
+ *	Run background operations synchronously for cards having manual BKOPS
+ *	enabled and in case it reports urgent BKOPS level.
 */
-void mmc_start_bkops(struct mmc_card *card, bool from_exception)
+void mmc_run_bkops(struct mmc_card *card)
 {
 	int err;
-	int timeout;
-	bool use_busy_signal;
 
-	if (!card->ext_csd.man_bkops_en || mmc_card_doing_bkops(card))
+	if (!card->ext_csd.man_bkops_en)
 		return;
 
 	err = mmc_read_bkops_status(card);
@@ -966,44 +927,26 @@ void mmc_start_bkops(struct mmc_card *card, bool from_exception)
 		return;
 	}
 
-	if (!card->ext_csd.raw_bkops_status)
-		return;
-
-	if (card->ext_csd.raw_bkops_status < EXT_CSD_BKOPS_LEVEL_2 &&
-	    from_exception)
+	if (!card->ext_csd.raw_bkops_status ||
+	    card->ext_csd.raw_bkops_status < EXT_CSD_BKOPS_LEVEL_2)
 		return;
 
-	if (card->ext_csd.raw_bkops_status >= EXT_CSD_BKOPS_LEVEL_2) {
-		timeout = MMC_OPS_TIMEOUT_MS;
-		use_busy_signal = true;
-	} else {
-		timeout = 0;
-		use_busy_signal = false;
-	}
-
 	mmc_retune_hold(card->host);
 
-	err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-			EXT_CSD_BKOPS_START, 1, timeout, 0,
-			use_busy_signal, true, false);
-	if (err) {
+	/*
+	 * For urgent BKOPS status, LEVEL_2 and higher, let's execute
+	 * synchronously. Future wise, we may consider to start BKOPS, for less
+	 * urgent levels by using an asynchronous background task, when idle.
+	 */
+	err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+			EXT_CSD_BKOPS_START, 1, MMC_OPS_TIMEOUT_MS);
+	if (err)
 		pr_warn("%s: Error %d starting bkops\n",
 			mmc_hostname(card->host), err);
-		mmc_retune_release(card->host);
-		return;
-	}
 
-	/*
-	 * For urgent bkops status (LEVEL_2 and more)
-	 * bkops executed synchronously, otherwise
-	 * the operation is in progress
-	 */
-	if (!use_busy_signal)
-		mmc_card_set_doing_bkops(card);
-	else
-		mmc_retune_release(card->host);
+	mmc_retune_release(card->host);
 }
-EXPORT_SYMBOL(mmc_start_bkops);
+EXPORT_SYMBOL(mmc_run_bkops);
 
 /*
  * Flush the cache to the non-volatile storage.