Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Support more Realtek wireless chips, from Jes Sorenson.

   2) New BPF types for per-cpu hash and arrap maps, from Alexei
      Starovoitov.

   3) Make several TCP sysctls per-namespace, from Nikolay Borisov.

   4) Allow the use of SO_REUSEPORT in order to do per-thread processing
   of incoming TCP/UDP connections.  The muxing can be done using a
   BPF program which hashes the incoming packet.  From Craig Gallek.

   5) Add a multiplexer for TCP streams, to provide a messaged based
      interface.  BPF programs can be used to determine the message
      boundaries.  From Tom Herbert.

   6) Add 802.1AE MACSEC support, from Sabrina Dubroca.

   7) Avoid factorial complexity when taking down an inetdev interface
      with lots of configured addresses.  We were doing things like
      traversing the entire address less for each address removed, and
      flushing the entire netfilter conntrack table for every address as
      well.

   8) Add and use SKB bulk free infrastructure, from Jesper Brouer.

   9) Allow offloading u32 classifiers to hardware, and implement for
      ixgbe, from John Fastabend.

  10) Allow configuring IRQ coalescing parameters on a per-queue basis,
      from Kan Liang.

  11) Extend ethtool so that larger link mode masks can be supported.
      From David Decotigny.

  12) Introduce devlink, which can be used to configure port link types
      (ethernet vs Infiniband, etc.), port splitting, and switch device
      level attributes as a whole.  From Jiri Pirko.

  13) Hardware offload support for flower classifiers, from Amir Vadai.

  14) Add "Local Checksum Offload".  Basically, for a tunneled packet
      the checksum of the outer header is 'constant' (because with the
      checksum field filled into the inner protocol header, the payload
      of the outer frame checksums to 'zero'), and we can take advantage
      of that in various ways.  From Edward Cree"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits)
  bonding: fix bond_get_stats()
  net: bcmgenet: fix dma api length mismatch
  net/mlx4_core: Fix backward compatibility on VFs
  phy: mdio-thunder: Fix some Kconfig typos
  lan78xx: add ndo_get_stats64
  lan78xx: handle statistics counter rollover
  RDS: TCP: Remove unused constant
  RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket
  net: smc911x: convert pxa dma to dmaengine
  team: remove duplicate set of flag IFF_MULTICAST
  bonding: remove duplicate set of flag IFF_MULTICAST
  net: fix a comment typo
  ethernet: micrel: fix some error codes
  ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it
  bpf, dst: add and use dst_tclassid helper
  bpf: make skb->tc_classid also readable
  net: mvneta: bm: clarify dependencies
  cls_bpf: reset class and reuse major in da
  ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c
  ldmvsw: Add ldmvsw.c driver code
  ...

1 files changed, 700 insertions, 76 deletions

diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index 6a034ddac36a..4596294c2ab1 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
  *
  * Intel Ethernet Controller XL710 Family Linux Driver
- * Copyright(c) 2013 - 2015 Intel Corporation.
+ * Copyright(c) 2013 - 2016 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -55,19 +55,13 @@ static i40e_status i40e_set_mac_type(struct i40e_hw *hw)
 		case I40E_DEV_ID_20G_KR2_A:
 			hw->mac.type = I40E_MAC_XL710;
 			break;
+		case I40E_DEV_ID_KX_X722:
+		case I40E_DEV_ID_QSFP_X722:
 		case I40E_DEV_ID_SFP_X722:
 		case I40E_DEV_ID_1G_BASE_T_X722:
 		case I40E_DEV_ID_10G_BASE_T_X722:
 			hw->mac.type = I40E_MAC_X722;
 			break;
-		case I40E_DEV_ID_X722_VF:
-		case I40E_DEV_ID_X722_VF_HV:
-			hw->mac.type = I40E_MAC_X722_VF;
-			break;
-		case I40E_DEV_ID_VF:
-		case I40E_DEV_ID_VF_HV:
-			hw->mac.type = I40E_MAC_VF;
-			break;
 		default:
 			hw->mac.type = I40E_MAC_GENERIC;
 			break;
@@ -1245,7 +1239,13 @@ i40e_status i40e_pf_reset(struct i40e_hw *hw)
 	grst_del = (rd32(hw, I40E_GLGEN_RSTCTL) &
 		    I40E_GLGEN_RSTCTL_GRSTDEL_MASK) >>
 		    I40E_GLGEN_RSTCTL_GRSTDEL_SHIFT;
-	for (cnt = 0; cnt < grst_del + 10; cnt++) {
+
+	/* It can take upto 15 secs for GRST steady state.
+	 * Bump it to 16 secs max to be safe.
+	 */
+	grst_del = grst_del * 20;
+
+	for (cnt = 0; cnt < grst_del; cnt++) {
 		reg = rd32(hw, I40E_GLGEN_RSTAT);
 		if (!(reg & I40E_GLGEN_RSTAT_DEVSTATE_MASK))
 			break;
@@ -1894,6 +1894,32 @@ i40e_status i40e_aq_set_phy_int_mask(struct i40e_hw *hw,
 }
 
 /**
+ * i40e_aq_set_phy_debug
+ * @hw: pointer to the hw struct
+ * @cmd_flags: debug command flags
+ * @cmd_details: pointer to command details structure or NULL
+ *
+ * Reset the external PHY.
+ **/
+enum i40e_status_code i40e_aq_set_phy_debug(struct i40e_hw *hw, u8 cmd_flags,
+					struct i40e_asq_cmd_details *cmd_details)
+{
+	struct i40e_aq_desc desc;
+	struct i40e_aqc_set_phy_debug *cmd =
+		(struct i40e_aqc_set_phy_debug *)&desc.params.raw;
+	enum i40e_status_code status;
+
+	i40e_fill_default_direct_cmd_desc(&desc,
+					  i40e_aqc_opc_set_phy_debug);
+
+	cmd->command_flags = cmd_flags;
+
+	status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details);
+
+	return status;
+}
+
+/**
  * i40e_aq_add_vsi
  * @hw: pointer to the hw struct
  * @vsi_ctx: pointer to a vsi context struct
@@ -1958,12 +1984,19 @@ i40e_status i40e_aq_set_vsi_unicast_promiscuous(struct i40e_hw *hw,
 	i40e_fill_default_direct_cmd_desc(&desc,
 					i40e_aqc_opc_set_vsi_promiscuous_modes);
 
-	if (set)
+	if (set) {
 		flags |= I40E_AQC_SET_VSI_PROMISC_UNICAST;
+		if (((hw->aq.api_maj_ver == 1) && (hw->aq.api_min_ver >= 5)) ||
+		    (hw->aq.api_maj_ver > 1))
+			flags |= I40E_AQC_SET_VSI_PROMISC_TX;
+	}
 
 	cmd->promiscuous_flags = cpu_to_le16(flags);
 
 	cmd->valid_flags = cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_UNICAST);
+	if (((hw->aq.api_maj_ver >= 1) && (hw->aq.api_min_ver >= 5)) ||
+	    (hw->aq.api_maj_ver > 1))
+		cmd->valid_flags |= cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_TX);
 
 	cmd->seid = cpu_to_le16(seid);
 	status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details);
@@ -2039,6 +2072,37 @@ i40e_status i40e_aq_set_vsi_broadcast(struct i40e_hw *hw,
 }
 
 /**
+ * i40e_aq_set_vsi_vlan_promisc - control the VLAN promiscuous setting
+ * @hw: pointer to the hw struct
+ * @seid: vsi number
+ * @enable: set MAC L2 layer unicast promiscuous enable/disable for a given VLAN
+ * @cmd_details: pointer to command details structure or NULL
+ **/
+i40e_status i40e_aq_set_vsi_vlan_promisc(struct i40e_hw *hw,
+				       u16 seid, bool enable,
+				       struct i40e_asq_cmd_details *cmd_details)
+{
+	struct i40e_aq_desc desc;
+	struct i40e_aqc_set_vsi_promiscuous_modes *cmd =
+		(struct i40e_aqc_set_vsi_promiscuous_modes *)&desc.params.raw;
+	i40e_status status;
+	u16 flags = 0;
+
+	i40e_fill_default_direct_cmd_desc(&desc,
+					i40e_aqc_opc_set_vsi_promiscuous_modes);
+	if (enable)
+		flags |= I40E_AQC_SET_VSI_PROMISC_VLAN;
+
+	cmd->promiscuous_flags = cpu_to_le16(flags);
+	cmd->valid_flags = cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_VLAN);
+	cmd->seid = cpu_to_le16(seid);
+
+	status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details);
+
+	return status;
+}
+
+/**
  * i40e_get_vsi_params - get VSI configuration info
  * @hw: pointer to the hw struct
  * @vsi_ctx: pointer to a vsi context struct
@@ -2283,8 +2347,8 @@ i40e_status i40e_update_link_info(struct i40e_hw *hw)
  * @downlink_seid: the VSI SEID
  * @enabled_tc: bitmap of TCs to be enabled
  * @default_port: true for default port VSI, false for control port
- * @enable_l2_filtering: true to add L2 filter table rules to regular forwarding rules for cloud support
  * @veb_seid: pointer to where to put the resulting VEB SEID
+ * @enable_stats: true to turn on VEB stats
  * @cmd_details: pointer to command details structure or NULL
  *
  * This asks the FW to add a VEB between the uplink and downlink
@@ -2292,8 +2356,8 @@ i40e_status i40e_update_link_info(struct i40e_hw *hw)
  **/
 i40e_status i40e_aq_add_veb(struct i40e_hw *hw, u16 uplink_seid,
 				u16 downlink_seid, u8 enabled_tc,
-				bool default_port, bool enable_l2_filtering,
-				u16 *veb_seid,
+				bool default_port, u16 *veb_seid,
+				bool enable_stats,
 				struct i40e_asq_cmd_details *cmd_details)
 {
 	struct i40e_aq_desc desc;
@@ -2320,8 +2384,9 @@ i40e_status i40e_aq_add_veb(struct i40e_hw *hw, u16 uplink_seid,
 	else
 		veb_flags |= I40E_AQC_ADD_VEB_PORT_TYPE_DATA;
 
-	if (enable_l2_filtering)
-		veb_flags |= I40E_AQC_ADD_VEB_ENABLE_L2_FILTER;
+	/* reverse logic here: set the bitflag to disable the stats */
+	if (!enable_stats)
+		veb_flags |= I40E_AQC_ADD_VEB_ENABLE_DISABLE_STATS;
 
 	cmd->veb_flags = cpu_to_le16(veb_flags);
 
@@ -2410,6 +2475,7 @@ i40e_status i40e_aq_add_macvlan(struct i40e_hw *hw, u16 seid,
 		(struct i40e_aqc_macvlan *)&desc.params.raw;
 	i40e_status status;
 	u16 buf_size;
+	int i;
 
 	if (count == 0 || !mv_list || !hw)
 		return I40E_ERR_PARAM;
@@ -2423,12 +2489,17 @@ i40e_status i40e_aq_add_macvlan(struct i40e_hw *hw, u16 seid,
 	cmd->seid[1] = 0;
 	cmd->seid[2] = 0;
 
+	for (i = 0; i < count; i++)
+		if (is_multicast_ether_addr(mv_list[i].mac_addr))
+			mv_list[i].flags |=
+			       cpu_to_le16(I40E_AQC_MACVLAN_ADD_USE_SHARED_MAC);
+
 	desc.flags |= cpu_to_le16((u16)(I40E_AQ_FLAG_BUF | I40E_AQ_FLAG_RD));
 	if (buf_size > I40E_AQ_LARGE_BUF)
 		desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB);
 
 	status = i40e_asq_send_command(hw, &desc, mv_list, buf_size,
-				    cmd_details);
+				       cmd_details);
 
 	return status;
 }
@@ -2476,6 +2547,137 @@ i40e_status i40e_aq_remove_macvlan(struct i40e_hw *hw, u16 seid,
 }
 
 /**
+ * i40e_mirrorrule_op - Internal helper function to add/delete mirror rule
+ * @hw: pointer to the hw struct
+ * @opcode: AQ opcode for add or delete mirror rule
+ * @sw_seid: Switch SEID (to which rule refers)
+ * @rule_type: Rule Type (ingress/egress/VLAN)
+ * @id: Destination VSI SEID or Rule ID
+ * @count: length of the list
+ * @mr_list: list of mirrored VSI SEIDs or VLAN IDs
+ * @cmd_details: pointer to command details structure or NULL
+ * @rule_id: Rule ID returned from FW
+ * @rule_used: Number of rules used in internal switch
+ * @rule_free: Number of rules free in internal switch
+ *
+ * Add/Delete a mirror rule to a specific switch. Mirror rules are supported for
+ * VEBs/VEPA elements only
+ **/
+static i40e_status i40e_mirrorrule_op(struct i40e_hw *hw,
+				u16 opcode, u16 sw_seid, u16 rule_type, u16 id,
+				u16 count, __le16 *mr_list,
+				struct i40e_asq_cmd_details *cmd_details,
+				u16 *rule_id, u16 *rules_used, u16 *rules_free)
+{
+	struct i40e_aq_desc desc;
+	struct i40e_aqc_add_delete_mirror_rule *cmd =
+		(struct i40e_aqc_add_delete_mirror_rule *)&desc.params.raw;
+	struct i40e_aqc_add_delete_mirror_rule_completion *resp =
+	(struct i40e_aqc_add_delete_mirror_rule_completion *)&desc.params.raw;
+	i40e_status status;
+	u16 buf_size;
+
+	buf_size = count * sizeof(*mr_list);
+
+	/* prep the rest of the request */
+	i40e_fill_default_direct_cmd_desc(&desc, opcode);
+	cmd->seid = cpu_to_le16(sw_seid);
+	cmd->rule_type = cpu_to_le16(rule_type &
+				     I40E_AQC_MIRROR_RULE_TYPE_MASK);
+	cmd->num_entries = cpu_to_le16(count);
+	/* Dest VSI for add, rule_id for delete */
+	cmd->destination = cpu_to_le16(id);
+	if (mr_list) {
+		desc.flags |= cpu_to_le16((u16)(I40E_AQ_FLAG_BUF |
+						I40E_AQ_FLAG_RD));
+		if (buf_size > I40E_AQ_LARGE_BUF)
+			desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB);
+	}
+
+	status = i40e_asq_send_command(hw, &desc, mr_list, buf_size,
+				       cmd_details);
+	if (!status ||
+	    hw->aq.asq_last_status == I40E_AQ_RC_ENOSPC) {
+		if (rule_id)
+			*rule_id = le16_to_cpu(resp->rule_id);
+		if (rules_used)
+			*rules_used = le16_to_cpu(resp->mirror_rules_used);
+		if (rules_free)
+			*rules_free = le16_to_cpu(resp->mirror_rules_free);
+	}
+	return status;
+}
+
+/**
+ * i40e_aq_add_mirrorrule - add a mirror rule
+ * @hw: pointer to the hw struct
+ * @sw_seid: Switch SEID (to which rule refers)
+ * @rule_type: Rule Type (ingress/egress/VLAN)
+ * @dest_vsi: SEID of VSI to which packets will be mirrored
+ * @count: length of the list
+ * @mr_list: list of mirrored VSI SEIDs or VLAN IDs
+ * @cmd_details: pointer to command details structure or NULL
+ * @rule_id: Rule ID returned from FW
+ * @rule_used: Number of rules used in internal switch
+ * @rule_free: Number of rules free in internal switch
+ *
+ * Add mirror rule. Mirror rules are supported for VEBs or VEPA elements only
+ **/
+i40e_status i40e_aq_add_mirrorrule(struct i40e_hw *hw, u16 sw_seid,
+			u16 rule_type, u16 dest_vsi, u16 count, __le16 *mr_list,
+			struct i40e_asq_cmd_details *cmd_details,
+			u16 *rule_id, u16 *rules_used, u16 *rules_free)
+{
+	if (!(rule_type == I40E_AQC_MIRROR_RULE_TYPE_ALL_INGRESS ||
+	    rule_type == I40E_AQC_MIRROR_RULE_TYPE_ALL_EGRESS)) {
+		if (count == 0 || !mr_list)
+			return I40E_ERR_PARAM;
+	}
+
+	return i40e_mirrorrule_op(hw, i40e_aqc_opc_add_mirror_rule, sw_seid,
+				  rule_type, dest_vsi, count, mr_list,
+				  cmd_details, rule_id, rules_used, rules_free);
+}
+
+/**
+ * i40e_aq_delete_mirrorrule - delete a mirror rule
+ * @hw: pointer to the hw struct
+ * @sw_seid: Switch SEID (to which rule refers)
+ * @rule_type: Rule Type (ingress/egress/VLAN)
+ * @count: length of the list
+ * @rule_id: Rule ID that is returned in the receive desc as part of
+ *		add_mirrorrule.
+ * @mr_list: list of mirrored VLAN IDs to be removed
+ * @cmd_details: pointer to command details structure or NULL
+ * @rule_used: Number of rules used in internal switch
+ * @rule_free: Number of rules free in internal switch
+ *
+ * Delete a mirror rule. Mirror rules are supported for VEBs/VEPA elements only
+ **/
+i40e_status i40e_aq_delete_mirrorrule(struct i40e_hw *hw, u16 sw_seid,
+			u16 rule_type, u16 rule_id, u16 count, __le16 *mr_list,
+			struct i40e_asq_cmd_details *cmd_details,
+			u16 *rules_used, u16 *rules_free)
+{
+	/* Rule ID has to be valid except rule_type: INGRESS VLAN mirroring */
+	if (rule_type != I40E_AQC_MIRROR_RULE_TYPE_VLAN) {
+		if (!rule_id)
+			return I40E_ERR_PARAM;
+	} else {
+		/* count and mr_list shall be valid for rule_type INGRESS VLAN
+		 * mirroring. For other rule_type, count and rule_type should
+		 * not matter.
+		 */
+		if (count == 0 || !mr_list)
+			return I40E_ERR_PARAM;
+	}
+
+	return i40e_mirrorrule_op(hw, i40e_aqc_opc_delete_mirror_rule, sw_seid,
+				  rule_type, rule_id, count, mr_list,
+				  cmd_details, NULL, rules_used, rules_free);
+}
+
+/**
  * i40e_aq_send_msg_to_vf
  * @hw: pointer to the hardware structure
  * @vfid: VF id to send msg
@@ -2765,35 +2967,6 @@ i40e_aq_erase_nvm_exit:
 	return status;
 }
 
-#define I40E_DEV_FUNC_CAP_SWITCH_MODE	0x01
-#define I40E_DEV_FUNC_CAP_MGMT_MODE	0x02
-#define I40E_DEV_FUNC_CAP_NPAR		0x03
-#define I40E_DEV_FUNC_CAP_OS2BMC	0x04
-#define I40E_DEV_FUNC_CAP_VALID_FUNC	0x05
-#define I40E_DEV_FUNC_CAP_SRIOV_1_1	0x12
-#define I40E_DEV_FUNC_CAP_VF		0x13
-#define I40E_DEV_FUNC_CAP_VMDQ		0x14
-#define I40E_DEV_FUNC_CAP_802_1_QBG	0x15
-#define I40E_DEV_FUNC_CAP_802_1_QBH	0x16
-#define I40E_DEV_FUNC_CAP_VSI		0x17
-#define I40E_DEV_FUNC_CAP_DCB		0x18
-#define I40E_DEV_FUNC_CAP_FCOE		0x21
-#define I40E_DEV_FUNC_CAP_ISCSI		0x22
-#define I40E_DEV_FUNC_CAP_RSS		0x40
-#define I40E_DEV_FUNC_CAP_RX_QUEUES	0x41
-#define I40E_DEV_FUNC_CAP_TX_QUEUES	0x42
-#define I40E_DEV_FUNC_CAP_MSIX		0x43
-#define I40E_DEV_FUNC_CAP_MSIX_VF	0x44
-#define I40E_DEV_FUNC_CAP_FLOW_DIRECTOR	0x45
-#define I40E_DEV_FUNC_CAP_IEEE_1588	0x46
-#define I40E_DEV_FUNC_CAP_FLEX10	0xF1
-#define I40E_DEV_FUNC_CAP_CEM		0xF2
-#define I40E_DEV_FUNC_CAP_IWARP		0x51
-#define I40E_DEV_FUNC_CAP_LED		0x61
-#define I40E_DEV_FUNC_CAP_SDP		0x62
-#define I40E_DEV_FUNC_CAP_MDIO		0x63
-#define I40E_DEV_FUNC_CAP_WR_CSR_PROT	0x64
-
 /**
  * i40e_parse_discover_capabilities
  * @hw: pointer to the hw struct
@@ -2832,79 +3005,79 @@ static void i40e_parse_discover_capabilities(struct i40e_hw *hw, void *buff,
 		major_rev = cap->major_rev;
 
 		switch (id) {
-		case I40E_DEV_FUNC_CAP_SWITCH_MODE:
+		case I40E_AQ_CAP_ID_SWITCH_MODE:
 			p->switch_mode = number;
 			break;
-		case I40E_DEV_FUNC_CAP_MGMT_MODE:
+		case I40E_AQ_CAP_ID_MNG_MODE:
 			p->management_mode = number;
 			break;
-		case I40E_DEV_FUNC_CAP_NPAR:
+		case I40E_AQ_CAP_ID_NPAR_ACTIVE:
 			p->npar_enable = number;
 			break;
-		case I40E_DEV_FUNC_CAP_OS2BMC:
+		case I40E_AQ_CAP_ID_OS2BMC_CAP:
 			p->os2bmc = number;
 			break;
-		case I40E_DEV_FUNC_CAP_VALID_FUNC:
+		case I40E_AQ_CAP_ID_FUNCTIONS_VALID:
 			p->valid_functions = number;
 			break;
-		case I40E_DEV_FUNC_CAP_SRIOV_1_1:
+		case I40E_AQ_CAP_ID_SRIOV:
 			if (number == 1)
 				p->sr_iov_1_1 = true;
 			break;
-		case I40E_DEV_FUNC_CAP_VF:
+		case I40E_AQ_CAP_ID_VF:
 			p->num_vfs = number;
 			p->vf_base_id = logical_id;
 			break;
-		case I40E_DEV_FUNC_CAP_VMDQ:
+		case I40E_AQ_CAP_ID_VMDQ:
 			if (number == 1)
 				p->vmdq = true;
 			break;
-		case I40E_DEV_FUNC_CAP_802_1_QBG:
+		case I40E_AQ_CAP_ID_8021QBG:
 			if (number == 1)
 				p->evb_802_1_qbg = true;
 			break;
-		case I40E_DEV_FUNC_CAP_802_1_QBH:
+		case I40E_AQ_CAP_ID_8021QBR:
 			if (number == 1)
 				p->evb_802_1_qbh = true;
 			break;
-		case I40E_DEV_FUNC_CAP_VSI:
+		case I40E_AQ_CAP_ID_VSI:
 			p->num_vsis = number;
 			break;
-		case I40E_DEV_FUNC_CAP_DCB:
+		case I40E_AQ_CAP_ID_DCB:
 			if (number == 1) {
 				p->dcb = true;
 				p->enabled_tcmap = logical_id;
 				p->maxtc = phys_id;
 			}
 			break;
-		case I40E_DEV_FUNC_CAP_FCOE:
+		case I40E_AQ_CAP_ID_FCOE:
 			if (number == 1)
 				p->fcoe = true;
 			break;
-		case I40E_DEV_FUNC_CAP_ISCSI:
+		case I40E_AQ_CAP_ID_ISCSI:
 			if (number == 1)
 				p->iscsi = true;
 			break;
-		case I40E_DEV_FUNC_CAP_RSS:
+		case I40E_AQ_CAP_ID_RSS:
 			p->rss = true;
 			p->rss_table_size = number;
 			p->rss_table_entry_width = logical_id;
 			break;
-		case I40E_DEV_FUNC_CAP_RX_QUEUES:
+		case I40E_AQ_CAP_ID_RXQ:
 			p->num_rx_qp = number;
 			p->base_queue = phys_id;
 			break;
-		case I40E_DEV_FUNC_CAP_TX_QUEUES:
+		case I40E_AQ_CAP_ID_TXQ:
 			p->num_tx_qp = number;
 			p->base_queue = phys_id;
 			break;
-		case I40E_DEV_FUNC_CAP_MSIX:
+		case I40E_AQ_CAP_ID_MSIX:
 			p->num_msix_vectors = number;
 			break;
-		case I40E_DEV_FUNC_CAP_MSIX_VF:
+		case I40E_AQ_CAP_ID_VF_MSIX:
 			p->num_msix_vectors_vf = number;
 			break;
-		case I40E_DEV_FUNC_CAP_FLEX10:
+		case I40E_AQ_CAP_ID_FLEX10:
 			if (major_rev == 1) {
 				if (number == 1) {
 					p->flex10_enable = true;
@@ -2920,38 +3093,38 @@ static void i40e_parse_discover_capabilities(struct i40e_hw *hw, void *buff,
 			p->flex10_mode = logical_id;
 			p->flex10_status = phys_id;
 			break;
-		case I40E_DEV_FUNC_CAP_CEM:
+		case I40E_AQ_CAP_ID_CEM:
 			if (number == 1)
 				p->mgmt_cem = true;
 			break;
-		case I40E_DEV_FUNC_CAP_IWARP:
+		case I40E_AQ_CAP_ID_IWARP:
 			if (number == 1)
 				p->iwarp = true;
 			break;
-		case I40E_DEV_FUNC_CAP_LED:
+		case I40E_AQ_CAP_ID_LED:
 			if (phys_id < I40E_HW_CAP_MAX_GPIO)
 				p->led[phys_id] = true;
 			break;
-		case I40E_DEV_FUNC_CAP_SDP:
+		case I40E_AQ_CAP_ID_SDP:
 			if (phys_id < I40E_HW_CAP_MAX_GPIO)
 				p->sdp[phys_id] = true;
 			break;
-		case I40E_DEV_FUNC_CAP_MDIO:
+		case I40E_AQ_CAP_ID_MDIO:
 			if (number == 1) {
 				p->mdio_port_num = phys_id;
 				p->mdio_port_mode = logical_id;
 			}
 			break;
-		case I40E_DEV_FUNC_CAP_IEEE_1588:
+		case I40E_AQ_CAP_ID_1588:
 			if (number == 1)
 				p->ieee_1588 = true;
 			break;
-		case I40E_DEV_FUNC_CAP_FLOW_DIRECTOR:
+		case I40E_AQ_CAP_ID_FLOW_DIRECTOR:
 			p->fd = true;
 			p->fd_filters_guaranteed = number;
 			p->fd_filters_best_effort = logical_id;
 			break;
-		case I40E_DEV_FUNC_CAP_WR_CSR_PROT:
+		case I40E_AQ_CAP_ID_WSR_PROT:
 			p->wr_csr_prot = (u64)number;
 			p->wr_csr_prot |= (u64)logical_id << 32;
 			break;
@@ -3709,7 +3882,7 @@ i40e_status i40e_set_filter_control(struct i40e_hw *hw,
 		return ret;
 
 	/* Read the PF Queue Filter control register */
-	val = rd32(hw, I40E_PFQF_CTL_0);
+	val = i40e_read_rx_ctl(hw, I40E_PFQF_CTL_0);
 
 	/* Program required PE hash buckets for the PF */
 	val &= ~I40E_PFQF_CTL_0_PEHSIZE_MASK;
@@ -3746,7 +3919,7 @@ i40e_status i40e_set_filter_control(struct i40e_hw *hw,
 	if (settings->enable_macvlan)
 		val |= I40E_PFQF_CTL_0_MACVLAN_ENA_MASK;
 
-	wr32(hw, I40E_PFQF_CTL_0, val);
+	i40e_write_rx_ctl(hw, I40E_PFQF_CTL_0, val);
 
 	return 0;
 }
@@ -4073,3 +4246,454 @@ i40e_status i40e_aq_configure_partition_bw(struct i40e_hw *hw,
 
 	return status;
 }
+
+/**
+ * i40e_read_phy_register
+ * @hw: pointer to the HW structure
+ * @page: registers page number
+ * @reg: register address in the page
+ * @phy_adr: PHY address on MDIO interface
+ * @value: PHY register value
+ *
+ * Reads specified PHY register value
+ **/
+i40e_status i40e_read_phy_register(struct i40e_hw *hw,
+				   u8 page, u16 reg, u8 phy_addr,
+				   u16 *value)
+{
+	i40e_status status = I40E_ERR_TIMEOUT;
+	u32 command = 0;
+	u16 retry = 1000;
+	u8 port_num = hw->func_caps.mdio_port_num;
+
+	command = (reg << I40E_GLGEN_MSCA_MDIADD_SHIFT) |
+		  (page << I40E_GLGEN_MSCA_DEVADD_SHIFT) |
+		  (phy_addr << I40E_GLGEN_MSCA_PHYADD_SHIFT) |
+		  (I40E_MDIO_OPCODE_ADDRESS) |
+		  (I40E_MDIO_STCODE) |
+		  (I40E_GLGEN_MSCA_MDICMD_MASK) |
+		  (I40E_GLGEN_MSCA_MDIINPROGEN_MASK);
+	wr32(hw, I40E_GLGEN_MSCA(port_num), command);
+	do {
+		command = rd32(hw, I40E_GLGEN_MSCA(port_num));
+		if (!(command & I40E_GLGEN_MSCA_MDICMD_MASK)) {
+			status = 0;
+			break;
+		}
+		usleep_range(10, 20);
+		retry--;
+	} while (retry);
+
+	if (status) {
+		i40e_debug(hw, I40E_DEBUG_PHY,
+			   "PHY: Can't write command to external PHY.\n");
+		goto phy_read_end;
+	}
+
+	command = (page << I40E_GLGEN_MSCA_DEVADD_SHIFT) |
+		  (phy_addr << I40E_GLGEN_MSCA_PHYADD_SHIFT) |
+		  (I40E_MDIO_OPCODE_READ) |
+		  (I40E_MDIO_STCODE) |
+		  (I40E_GLGEN_MSCA_MDICMD_MASK) |
+		  (I40E_GLGEN_MSCA_MDIINPROGEN_MASK);
+	status = I40E_ERR_TIMEOUT;
+	retry = 1000;
+	wr32(hw, I40E_GLGEN_MSCA(port_num), command);
+	do {
+		command = rd32(hw, I40E_GLGEN_MSCA(port_num));
+		if (!(command & I40E_GLGEN_MSCA_MDICMD_MASK)) {
+			status = 0;
+			break;
+		}
+		usleep_range(10, 20);
+		retry--;
+	} while (retry);
+
+	if (!status) {
+		command = rd32(hw, I40E_GLGEN_MSRWD(port_num));
+		*value = (command & I40E_GLGEN_MSRWD_MDIRDDATA_MASK) >>
+			 I40E_GLGEN_MSRWD_MDIRDDATA_SHIFT;
+	} else {
+		i40e_debug(hw, I40E_DEBUG_PHY,
+			   "PHY: Can't read register value from external PHY.\n");
+	}
+
+phy_read_end:
+	return status;
+}
+
+/**
+ * i40e_write_phy_register
+ * @hw: pointer to the HW structure
+ * @page: registers page number
+ * @reg: register address in the page
+ * @phy_adr: PHY address on MDIO interface
+ * @value: PHY register value
+ *
+ * Writes value to specified PHY register
+ **/
+i40e_status i40e_write_phy_register(struct i40e_hw *hw,
+				    u8 page, u16 reg, u8 phy_addr,
+				    u16 value)
+{
+	i40e_status status = I40E_ERR_TIMEOUT;
+	u32 command = 0;
+	u16 retry = 1000;
+	u8 port_num = hw->func_caps.mdio_port_num;
+
+	command = (reg << I40E_GLGEN_MSCA_MDIADD_SHIFT) |
+		  (page << I40E_GLGEN_MSCA_DEVADD_SHIFT) |
+		  (phy_addr << I40E_GLGEN_MSCA_PHYADD_SHIFT) |
+		  (I40E_MDIO_OPCODE_ADDRESS) |
+		  (I40E_MDIO_STCODE) |
+		  (I40E_GLGEN_MSCA_MDICMD_MASK) |
+		  (I40E_GLGEN_MSCA_MDIINPROGEN_MASK);
+	wr32(hw, I40E_GLGEN_MSCA(port_num), command);
+	do {
+		command = rd32(hw, I40E_GLGEN_MSCA(port_num));
+		if (!(command & I40E_GLGEN_MSCA_MDICMD_MASK)) {
+			status = 0;
+			break;
+		}
+		usleep_range(10, 20);
+		retry--;
+	} while (retry);
+	if (status) {
+		i40e_debug(hw, I40E_DEBUG_PHY,
+			   "PHY: Can't write command to external PHY.\n");
+		goto phy_write_end;
+	}
+
+	command = value << I40E_GLGEN_MSRWD_MDIWRDATA_SHIFT;
+	wr32(hw, I40E_GLGEN_MSRWD(port_num), command);
+
+	command = (page << I40E_GLGEN_MSCA_DEVADD_SHIFT) |
+		  (phy_addr << I40E_GLGEN_MSCA_PHYADD_SHIFT) |
+		  (I40E_MDIO_OPCODE_WRITE) |
+		  (I40E_MDIO_STCODE) |
+		  (I40E_GLGEN_MSCA_MDICMD_MASK) |
+		  (I40E_GLGEN_MSCA_MDIINPROGEN_MASK);
+	status = I40E_ERR_TIMEOUT;
+	retry = 1000;
+	wr32(hw, I40E_GLGEN_MSCA(port_num), command);
+	do {
+		command = rd32(hw, I40E_GLGEN_MSCA(port_num));
+		if (!(command & I40E_GLGEN_MSCA_MDICMD_MASK)) {
+			status = 0;
+			break;
+		}
+		usleep_range(10, 20);
+		retry--;
+	} while (retry);
+
+phy_write_end:
+	return status;
+}
+
+/**
+ * i40e_get_phy_address
+ * @hw: pointer to the HW structure
+ * @dev_num: PHY port num that address we want
+ * @phy_addr: Returned PHY address
+ *
+ * Gets PHY address for current port
+ **/
+u8 i40e_get_phy_address(struct i40e_hw *hw, u8 dev_num)
+{
+	u8 port_num = hw->func_caps.mdio_port_num;
+	u32 reg_val = rd32(hw, I40E_GLGEN_MDIO_I2C_SEL(port_num));
+
+	return (u8)(reg_val >> ((dev_num + 1) * 5)) & 0x1f;
+}
+
+/**
+ * i40e_blink_phy_led
+ * @hw: pointer to the HW structure
+ * @time: time how long led will blinks in secs
+ * @interval: gap between LED on and off in msecs
+ *
+ * Blinks PHY link LED
+ **/
+i40e_status i40e_blink_phy_link_led(struct i40e_hw *hw,
+				    u32 time, u32 interval)
+{
+	i40e_status status = 0;
+	u32 i;
+	u16 led_ctl;
+	u16 gpio_led_port;
+	u16 led_reg;
+	u16 led_addr = I40E_PHY_LED_PROV_REG_1;
+	u8 phy_addr = 0;
+	u8 port_num;
+
+	i = rd32(hw, I40E_PFGEN_PORTNUM);
+	port_num = (u8)(i & I40E_PFGEN_PORTNUM_PORT_NUM_MASK);
+	phy_addr = i40e_get_phy_address(hw, port_num);
+
+	for (gpio_led_port = 0; gpio_led_port < 3; gpio_led_port++,
+	     led_addr++) {
+		status = i40e_read_phy_register(hw, I40E_PHY_COM_REG_PAGE,
+						led_addr, phy_addr, &led_reg);
+		if (status)
+			goto phy_blinking_end;
+		led_ctl = led_reg;
+		if (led_reg & I40E_PHY_LED_LINK_MODE_MASK) {
+			led_reg = 0;
+			status = i40e_write_phy_register(hw,
+							 I40E_PHY_COM_REG_PAGE,
+							 led_addr, phy_addr,
+							 led_reg);
+			if (status)
+				goto phy_blinking_end;
+			break;
+		}
+	}
+
+	if (time > 0 && interval > 0) {
+		for (i = 0; i < time * 1000; i += interval) {
+			status = i40e_read_phy_register(hw,
+							I40E_PHY_COM_REG_PAGE,
+							led_addr, phy_addr,
+							&led_reg);
+			if (status)
+				goto restore_config;
+			if (led_reg & I40E_PHY_LED_MANUAL_ON)
+				led_reg = 0;
+			else
+				led_reg = I40E_PHY_LED_MANUAL_ON;
+			status = i40e_write_phy_register(hw,
+							 I40E_PHY_COM_REG_PAGE,
+							 led_addr, phy_addr,
+							 led_reg);
+			if (status)
+				goto restore_config;
+			msleep(interval);
+		}
+	}
+
+restore_config:
+	status = i40e_write_phy_register(hw, I40E_PHY_COM_REG_PAGE, led_addr,
+					 phy_addr, led_ctl);
+
+phy_blinking_end:
+	return status;
+}
+
+/**
+ * i40e_led_get_phy - return current on/off mode
+ * @hw: pointer to the hw struct
+ * @led_addr: address of led register to use
+ * @val: original value of register to use
+ *
+ **/
+i40e_status i40e_led_get_phy(struct i40e_hw *hw, u16 *led_addr,
+			     u16 *val)
+{
+	i40e_status status = 0;
+	u16 gpio_led_port;
+	u8 phy_addr = 0;
+	u16 reg_val;
+	u16 temp_addr;
+	u8 port_num;
+	u32 i;
+
+	temp_addr = I40E_PHY_LED_PROV_REG_1;
+	i = rd32(hw, I40E_PFGEN_PORTNUM);
+	port_num = (u8)(i & I40E_PFGEN_PORTNUM_PORT_NUM_MASK);
+	phy_addr = i40e_get_phy_address(hw, port_num);
+
+	for (gpio_led_port = 0; gpio_led_port < 3; gpio_led_port++,
+	     temp_addr++) {
+		status = i40e_read_phy_register(hw, I40E_PHY_COM_REG_PAGE,
+						temp_addr, phy_addr, &reg_val);
+		if (status)
+			return status;
+		*val = reg_val;
+		if (reg_val & I40E_PHY_LED_LINK_MODE_MASK) {
+			*led_addr = temp_addr;
+			break;
+		}
+	}
+	return status;
+}
+
+/**
+ * i40e_led_set_phy
+ * @hw: pointer to the HW structure
+ * @on: true or false
+ * @mode: original val plus bit for set or ignore
+ * Set led's on or off when controlled by the PHY
+ *
+ **/
+i40e_status i40e_led_set_phy(struct i40e_hw *hw, bool on,
+			     u16 led_addr, u32 mode)
+{
+	i40e_status status = 0;
+	u16 led_ctl = 0;
+	u16 led_reg = 0;
+	u8 phy_addr = 0;
+	u8 port_num;
+	u32 i;
+
+	i = rd32(hw, I40E_PFGEN_PORTNUM);
+	port_num = (u8)(i & I40E_PFGEN_PORTNUM_PORT_NUM_MASK);
+	phy_addr = i40e_get_phy_address(hw, port_num);
+
+	status = i40e_read_phy_register(hw, I40E_PHY_COM_REG_PAGE, led_addr,
+					phy_addr, &led_reg);
+	if (status)
+		return status;
+	led_ctl = led_reg;
+	if (led_reg & I40E_PHY_LED_LINK_MODE_MASK) {
+		led_reg = 0;
+		status = i40e_write_phy_register(hw, I40E_PHY_COM_REG_PAGE,
+						 led_addr, phy_addr, led_reg);
+		if (status)
+			return status;
+	}
+	status = i40e_read_phy_register(hw, I40E_PHY_COM_REG_PAGE,
+					led_addr, phy_addr, &led_reg);
+	if (status)
+		goto restore_config;
+	if (on)
+		led_reg = I40E_PHY_LED_MANUAL_ON;
+	else
+		led_reg = 0;
+	status = i40e_write_phy_register(hw, I40E_PHY_COM_REG_PAGE,
+					 led_addr, phy_addr, led_reg);
+	if (status)
+		goto restore_config;
+	if (mode & I40E_PHY_LED_MODE_ORIG) {
+		led_ctl = (mode & I40E_PHY_LED_MODE_MASK);
+		status = i40e_write_phy_register(hw,
+						 I40E_PHY_COM_REG_PAGE,
+						 led_addr, phy_addr, led_ctl);
+	}
+	return status;
+restore_config:
+	status = i40e_write_phy_register(hw, I40E_PHY_COM_REG_PAGE, led_addr,
+					 phy_addr, led_ctl);
+	return status;
+}
+
+/**
+ * i40e_aq_rx_ctl_read_register - use FW to read from an Rx control register
+ * @hw: pointer to the hw struct
+ * @reg_addr: register address
+ * @reg_val: ptr to register value
+ * @cmd_details: pointer to command details structure or NULL
+ *
+ * Use the firmware to read the Rx control register,
+ * especially useful if the Rx unit is under heavy pressure
+ **/
+i40e_status i40e_aq_rx_ctl_read_register(struct i40e_hw *hw,
+				u32 reg_addr, u32 *reg_val,
+				struct i40e_asq_cmd_details *cmd_details)
+{
+	struct i40e_aq_desc desc;
+	struct i40e_aqc_rx_ctl_reg_read_write *cmd_resp =
+		(struct i40e_aqc_rx_ctl_reg_read_write *)&desc.params.raw;
+	i40e_status status;
+
+	if (!reg_val)
+		return I40E_ERR_PARAM;
+
+	i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_rx_ctl_reg_read);
+
+	cmd_resp->address = cpu_to_le32(reg_addr);
+
+	status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details);
+
+	if (status == 0)
+		*reg_val = le32_to_cpu(cmd_resp->value);
+
+	return status;
+}
+
+/**
+ * i40e_read_rx_ctl - read from an Rx control register
+ * @hw: pointer to the hw struct
+ * @reg_addr: register address
+ **/
+u32 i40e_read_rx_ctl(struct i40e_hw *hw, u32 reg_addr)
+{
+	i40e_status status = 0;
+	bool use_register;
+	int retry = 5;
+	u32 val = 0;
+
+	use_register = (hw->aq.api_maj_ver == 1) && (hw->aq.api_min_ver < 5);
+	if (!use_register) {
+do_retry:
+		status = i40e_aq_rx_ctl_read_register(hw, reg_addr, &val, NULL);
+		if (hw->aq.asq_last_status == I40E_AQ_RC_EAGAIN && retry) {
+			usleep_range(1000, 2000);
+			retry--;
+			goto do_retry;
+		}
+	}
+
+	/* if the AQ access failed, try the old-fashioned way */
+	if (status || use_register)
+		val = rd32(hw, reg_addr);
+
+	return val;
+}
+
+/**
+ * i40e_aq_rx_ctl_write_register
+ * @hw: pointer to the hw struct
+ * @reg_addr: register address
+ * @reg_val: register value
+ * @cmd_details: pointer to command details structure or NULL
+ *
+ * Use the firmware to write to an Rx control register,
+ * especially useful if the Rx unit is under heavy pressure
+ **/
+i40e_status i40e_aq_rx_ctl_write_register(struct i40e_hw *hw,
+				u32 reg_addr, u32 reg_val,
+				struct i40e_asq_cmd_details *cmd_details)
+{
+	struct i40e_aq_desc desc;
+	struct i40e_aqc_rx_ctl_reg_read_write *cmd =
+		(struct i40e_aqc_rx_ctl_reg_read_write *)&desc.params.raw;
+	i40e_status status;
+
+	i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_rx_ctl_reg_write);
+
+	cmd->address = cpu_to_le32(reg_addr);
+	cmd->value = cpu_to_le32(reg_val);
+
+	status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details);
+
+	return status;
+}
+
+/**
+ * i40e_write_rx_ctl - write to an Rx control register
+ * @hw: pointer to the hw struct
+ * @reg_addr: register address
+ * @reg_val: register value
+ **/
+void i40e_write_rx_ctl(struct i40e_hw *hw, u32 reg_addr, u32 reg_val)
+{
+	i40e_status status = 0;
+	bool use_register;
+	int retry = 5;
+
+	use_register = (hw->aq.api_maj_ver == 1) && (hw->aq.api_min_ver < 5);
+	if (!use_register) {
+do_retry:
+		status = i40e_aq_rx_ctl_write_register(hw, reg_addr,
+						       reg_val, NULL);
+		if (hw->aq.asq_last_status == I40E_AQ_RC_EAGAIN && retry) {
+			usleep_range(1000, 2000);
+			retry--;
+			goto do_retry;
+		}
+	}
+
+	/* if the AQ access failed, try the old-fashioned way */
+	if (status || use_register)
+		wr32(hw, reg_addr, reg_val);
+}