igc: Remove reset adapter task for i226 during disable tsn config

I225 have limitation when programming the BaseTime register which required
a power cycle of the controller. This limitation already lifted in I226.
This patch removes the restriction so that when user configure/remove any
TSN mode, it would not go into power cycle reset adapter.

How to test:

Schedule any gate control list configuration or delete it.

Example:

1)

BASE_TIME=$(date +%s%N)
tc qdisc replace dev $interface_name parent root handle 100 taprio \
    num_tc 4 \
    map 3 1 0 2 3 3 3 3 3 3 3 3 3 3 3 3 \
    queues 1@0 1@1 1@2 1@3 \
    base-time $BASE_TIME \
    sched-entry S 0F 1000000 \
    flags 0x2

2) tc qdisc del dev $intername_name root

Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

1 files changed, 3 insertions, 8 deletions

diff --git a/drivers/net/ethernet/intel/igc/igc_tsn.c b/drivers/net/ethernet/intel/igc/igc_tsn.c
index d26fc0f47640..a386c8d61dbf 100644
--- a/drivers/net/ethernet/intel/igc/igc_tsn.c
+++ b/drivers/net/ethernet/intel/igc/igc_tsn.c
@@ -289,21 +289,16 @@ int igc_tsn_reset(struct igc_adapter *adapter)
 	return err;
 }
 
-int igc_tsn_offload_apply(struct igc_adapter *adapter, bool enable)
+int igc_tsn_offload_apply(struct igc_adapter *adapter)
 {
 	struct igc_hw *hw = &adapter->hw;
-	int err;
 
-	if (netif_running(adapter->netdev) &&
-	    (igc_is_device_id_i225(hw) || !enable)) {
+	if (netif_running(adapter->netdev) && igc_is_device_id_i225(hw)) {
 		schedule_work(&adapter->reset_task);
 		return 0;
 	}
 
-	err = igc_tsn_enable_offload(adapter);
-	if (err < 0)
-		return err;
+	igc_tsn_reset(adapter);
 
-	adapter->flags = igc_tsn_new_flags(adapter);
 	return 0;
 }