ath10k: split driver info messages during device initialisation

Earlier we printed all the info messages after a successful device
initialisation and firmware boot, but that's problematic if something goes
wrong and there's no easy way to know what firmware version was used and so on.

Split the info messages into smaller pieces and print them as soon as we have
the info available.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

1 files changed, 29 insertions, 15 deletions

diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index 2349cca31809..ea8b562aca8d 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -122,41 +122,48 @@ void ath10k_info(struct ath10k *ar, const char *fmt, ...)
 }
 EXPORT_SYMBOL(ath10k_info);
 
-void ath10k_print_driver_info(struct ath10k *ar)
+void ath10k_debug_print_hwfw_info(struct ath10k *ar)
 {
 	char fw_features[128] = {};
-	char boardinfo[100];
 
 	ath10k_core_get_fw_features_str(ar, fw_features, sizeof(fw_features));
 
-	if (ar->id.bmi_ids_valid)
-		scnprintf(boardinfo, sizeof(boardinfo), "%d:%d",
-			  ar->id.bmi_chip_id, ar->id.bmi_board_id);
-	else
-		scnprintf(boardinfo, sizeof(boardinfo), "N/A");
-
 	ath10k_info(ar, "%s target 0x%08x chip_id 0x%08x sub %04x:%04x",
 		    ar->hw_params.name,
 		    ar->target_version,
 		    ar->chip_id,
 		    ar->id.subsystem_vendor, ar->id.subsystem_device);
 
+	ath10k_info(ar, "kconfig debug %d debugfs %d tracing %d dfs %d testmode %d\n",
+		    config_enabled(CONFIG_ATH10K_DEBUG),
+		    config_enabled(CONFIG_ATH10K_DEBUGFS),
+		    config_enabled(CONFIG_ATH10K_TRACING),
+		    config_enabled(CONFIG_ATH10K_DFS_CERTIFIED),
+		    config_enabled(CONFIG_NL80211_TESTMODE));
+
 	ath10k_info(ar, "firmware ver %s api %d features %s\n",
 		    ar->hw->wiphy->fw_version,
 		    ar->fw_api,
 		    fw_features);
+}
+
+void ath10k_debug_print_board_info(struct ath10k *ar)
+{
+	char boardinfo[100];
+
+	if (ar->id.bmi_ids_valid)
+		scnprintf(boardinfo, sizeof(boardinfo), "%d:%d",
+			  ar->id.bmi_chip_id, ar->id.bmi_board_id);
+	else
+		scnprintf(boardinfo, sizeof(boardinfo), "N/A");
 
 	ath10k_info(ar, "board_file api %d bmi_id %s",
 		    ar->bd_api,
 		    boardinfo);
+}
 
-	ath10k_info(ar, "kconfig debug %d debugfs %d tracing %d dfs %d testmode %d\n",
-		    config_enabled(CONFIG_ATH10K_DEBUG),
-		    config_enabled(CONFIG_ATH10K_DEBUGFS),
-		    config_enabled(CONFIG_ATH10K_TRACING),
-		    config_enabled(CONFIG_ATH10K_DFS_CERTIFIED),
-		    config_enabled(CONFIG_NL80211_TESTMODE));
-
+void ath10k_debug_print_boot_info(struct ath10k *ar)
+{
 	ath10k_info(ar, "htt-ver %d.%d wmi-op %d htt-op %d cal %s max-sta %d raw %d hwcrypto %d\n",
 		    ar->htt.target_version_major,
 		    ar->htt.target_version_minor,
@@ -167,6 +174,13 @@ void ath10k_print_driver_info(struct ath10k *ar)
 		    test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags),
 		    !test_bit(ATH10K_FLAG_HW_CRYPTO_DISABLED, &ar->dev_flags));
 }
+
+void ath10k_print_driver_info(struct ath10k *ar)
+{
+	ath10k_debug_print_hwfw_info(ar);
+	ath10k_debug_print_board_info(ar);
+	ath10k_debug_print_boot_info(ar);
+}
 EXPORT_SYMBOL(ath10k_print_driver_info);
 
 void ath10k_err(struct ath10k *ar, const char *fmt, ...)