Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...

1 files changed, 8 insertions, 8 deletions

diff --git a/drivers/net/wireless/ath/wil6210/fw.h b/drivers/net/wireless/ath/wil6210/fw.h
index 540fa1607794..440614d61156 100644
--- a/drivers/net/wireless/ath/wil6210/fw.h
+++ b/drivers/net/wireless/ath/wil6210/fw.h
@@ -33,7 +33,7 @@ struct wil_fw_record_head {
  */
 struct wil_fw_record_data { /* type == wil_fw_type_data */
 	__le32 addr;
-	__le32 data[0]; /* [data_size], see above */
+	__le32 data[]; /* [data_size], see above */
 } __packed;
 
 /* fill with constant @value, @size bytes starting from @addr */
@@ -61,7 +61,7 @@ struct wil_fw_record_capabilities { /* type == wil_fw_type_comment */
 	/* identifies capabilities record */
 	struct wil_fw_record_comment_hdr hdr;
 	/* capabilities (variable size), see enum wmi_fw_capability */
-	u8 capabilities[0];
+	u8 capabilities[];
 } __packed;
 
 /* FW VIF concurrency encoded inside a comment record
@@ -80,7 +80,7 @@ struct wil_fw_concurrency_combo {
 	u8 n_diff_channels; /* total number of different channels allowed */
 	u8 same_bi; /* for APs, 1 if all APs must have same BI */
 	/* keep last - concurrency limits, variable size by n_limits */
-	struct wil_fw_concurrency_limit limits[0];
+	struct wil_fw_concurrency_limit limits[];
 } __packed;
 
 struct wil_fw_record_concurrency { /* type == wil_fw_type_comment */
@@ -93,7 +93,7 @@ struct wil_fw_record_concurrency { /* type == wil_fw_type_comment */
 	/* number of concurrency combinations that follow */
 	__le16 n_combos;
 	/* keep last - combinations, variable size by n_combos */
-	struct wil_fw_concurrency_combo combos[0];
+	struct wil_fw_concurrency_combo combos[];
 } __packed;
 
 /* brd file info encoded inside a comment record */
@@ -108,7 +108,7 @@ struct wil_fw_record_brd_file { /* type == wil_fw_type_comment */
 	/* identifies brd file record */
 	struct wil_fw_record_comment_hdr hdr;
 	__le32 version;
-	struct brd_info brd_info[0];
+	struct brd_info brd_info[];
 } __packed;
 
 /* perform action
@@ -116,7 +116,7 @@ struct wil_fw_record_brd_file { /* type == wil_fw_type_comment */
  */
 struct wil_fw_record_action { /* type == wil_fw_type_action */
 	__le32 action; /* action to perform: reset, wait for fw ready etc. */
-	__le32 data[0]; /* action specific, [data_size], see above */
+	__le32 data[]; /* action specific, [data_size], see above */
 } __packed;
 
 /* data block for struct wil_fw_record_direct_write */
@@ -179,7 +179,7 @@ struct wil_fw_record_gateway_data { /* type == wil_fw_type_gateway_data */
 #define WIL_FW_GW_CTL_BUSY	BIT(29) /* gateway busy performing operation */
 #define WIL_FW_GW_CTL_RUN	BIT(30) /* start gateway operation */
 	__le32 command;
-	struct wil_fw_data_gw data[0]; /* total size [data_size], see above */
+	struct wil_fw_data_gw data[]; /* total size [data_size], see above */
 } __packed;
 
 /* 4-dword gateway */
@@ -201,7 +201,7 @@ struct wil_fw_record_gateway_data4 { /* type == wil_fw_type_gateway_data4 */
 	__le32 gateway_cmd_addr;
 	__le32 gateway_ctrl_address; /* same logic as for 1-dword gw */
 	__le32 command;
-	struct wil_fw_data_gw4 data[0]; /* total size [data_size], see above */
+	struct wil_fw_data_gw4 data[]; /* total size [data_size], see above */
 } __packed;
 
 #endif /* __WIL_FW_H__ */