Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) More iov_iter conversion work from Al Viro.

    [ The "crypto: switch af_alg_make_sg() to iov_iter" commit was
      wrong, and this pull actually adds an extra commit on top of the
      branch I'm pulling to fix that up, so that the pre-merge state is
      ok.   - Linus ]

 2) Various optimizations to the ipv4 forwarding information base trie
    lookup implementation.  From Alexander Duyck.

 3) Remove sock_iocb altogether, from CHristoph Hellwig.

 4) Allow congestion control algorithm selection via routing metrics.
    From Daniel Borkmann.

 5) Make ipv4 uncached route list per-cpu, from Eric Dumazet.

 6) Handle rfs hash collisions more gracefully, also from Eric Dumazet.

 7) Add xmit_more support to r8169, e1000, and e1000e drivers.  From
    Florian Westphal.

 8) Transparent Ethernet Bridging support for GRO, from Jesse Gross.

 9) Add BPF packet actions to packet scheduler, from Jiri Pirko.

10) Add support for uniqu flow IDs to openvswitch, from Joe Stringer.

11) New NetCP ethernet driver, from Muralidharan Karicheri and Wingman
    Kwok.

12) More sanely handle out-of-window dupacks, which can result in
    serious ACK storms.  From Neal Cardwell.

13) Various rhashtable bug fixes and enhancements, from Herbert Xu,
    Patrick McHardy, and Thomas Graf.

14) Support xmit_more in be2net, from Sathya Perla.

15) Group Policy extensions for vxlan, from Thomas Graf.

16) Remove Checksum Offload support for vxlan, from Tom Herbert.

17) Like ipv4, support lockless transmit over ipv6 UDP sockets.  From
    Vlad Yasevich.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1494+1 commits)
  crypto: fix af_alg_make_sg() conversion to iov_iter
  ipv4: Namespecify TCP PMTU mechanism
  i40e: Fix for stats init function call in Rx setup
  tcp: don't include Fast Open option in SYN-ACK on pure SYN-data
  openvswitch: Only set TUNNEL_VXLAN_OPT if VXLAN-GBP metadata is set
  ipv6: Make __ipv6_select_ident static
  ipv6: Fix fragment id assignment on LE arches.
  bridge: Fix inability to add non-vlan fdb entry
  net: Mellanox: Delete unnecessary checks before the function call "vunmap"
  cxgb4: Add support in cxgb4 to get expansion rom version via ethtool
  ethtool: rename reserved1 memeber in ethtool_drvinfo for expansion ROM version
  net: dsa: Remove redundant phy_attach()
  IB/mlx4: Reset flow support for IB kernel ULPs
  IB/mlx4: Always use the correct port for mirrored multicast attachments
  net/bonding: Fix potential bad memory access during bonding events
  tipc: remove tipc_snprintf
  tipc: nl compat add noop and remove legacy nl framework
  tipc: convert legacy nl stats show to nl compat
  tipc: convert legacy nl net id get to nl compat
  tipc: convert legacy nl net id set to nl compat
  ...

1 files changed, 83 insertions, 95 deletions

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
index 0b0d51a61060..faec35c899ec 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
@@ -44,7 +44,8 @@
 #include "chip.h"
 #include "firmware.h"
 
-#define DCMD_RESP_TIMEOUT  2000	/* In milli second */
+#define DCMD_RESP_TIMEOUT	2000	/* In milli second */
+#define CTL_DONE_TIMEOUT	2000	/* In milli second */
 
 #ifdef DEBUG
 
@@ -495,9 +496,9 @@ struct brcmf_sdio {
 	u8 *ctrl_frame_buf;
 	u16 ctrl_frame_len;
 	bool ctrl_frame_stat;
+	int ctrl_frame_err;
 
 	spinlock_t txq_lock;		/* protect bus->txq */
-	struct semaphore tx_seq_lock;	/* protect bus->tx_seq */
 	wait_queue_head_t ctrl_wait;
 	wait_queue_head_t dcmd_resp_wait;
 
@@ -514,7 +515,6 @@ struct brcmf_sdio {
 	bool txoff;		/* Transmit flow-controlled */
 	struct brcmf_sdio_count sdcnt;
 	bool sr_enabled; /* SaveRestore enabled */
-	bool sleeping; /* SDIO bus sleeping */
 
 	u8 tx_hdrlen;		/* sdio bus header length for tx packet */
 	bool txglom;		/* host tx glomming enable flag */
@@ -608,6 +608,8 @@ static const struct sdiod_drive_str sdiod_drvstr_tab2_3v3[] = {
 #define BCM4330_NVRAM_NAME		"brcm/brcmfmac4330-sdio.txt"
 #define BCM4334_FIRMWARE_NAME		"brcm/brcmfmac4334-sdio.bin"
 #define BCM4334_NVRAM_NAME		"brcm/brcmfmac4334-sdio.txt"
+#define BCM43340_FIRMWARE_NAME		"brcm/brcmfmac43340-sdio.bin"
+#define BCM43340_NVRAM_NAME		"brcm/brcmfmac43340-sdio.txt"
 #define BCM4335_FIRMWARE_NAME		"brcm/brcmfmac4335-sdio.bin"
 #define BCM4335_NVRAM_NAME		"brcm/brcmfmac4335-sdio.txt"
 #define BCM43362_FIRMWARE_NAME		"brcm/brcmfmac43362-sdio.bin"
@@ -629,6 +631,8 @@ MODULE_FIRMWARE(BCM4330_FIRMWARE_NAME);
 MODULE_FIRMWARE(BCM4330_NVRAM_NAME);
 MODULE_FIRMWARE(BCM4334_FIRMWARE_NAME);
 MODULE_FIRMWARE(BCM4334_NVRAM_NAME);
+MODULE_FIRMWARE(BCM43340_FIRMWARE_NAME);
+MODULE_FIRMWARE(BCM43340_NVRAM_NAME);
 MODULE_FIRMWARE(BCM4335_FIRMWARE_NAME);
 MODULE_FIRMWARE(BCM4335_NVRAM_NAME);
 MODULE_FIRMWARE(BCM43362_FIRMWARE_NAME);
@@ -660,6 +664,7 @@ static const struct brcmf_firmware_names brcmf_fwname_data[] = {
 	{ BRCM_CC_4329_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4329) },
 	{ BRCM_CC_4330_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4330) },
 	{ BRCM_CC_4334_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4334) },
+	{ BRCM_CC_43340_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM43340) },
 	{ BRCM_CC_4335_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4335) },
 	{ BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, BRCMF_FIRMWARE_NVRAM(BCM43362) },
 	{ BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) },
@@ -1008,12 +1013,12 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok)
 
 	brcmf_dbg(SDIO, "Enter: request %s currently %s\n",
 		  (sleep ? "SLEEP" : "WAKE"),
-		  (bus->sleeping ? "SLEEP" : "WAKE"));
+		  (bus->sdiodev->sleeping ? "SLEEP" : "WAKE"));
 
 	/* If SR is enabled control bus state with KSO */
 	if (bus->sr_enabled) {
 		/* Done if we're already in the requested state */
-		if (sleep == bus->sleeping)
+		if (sleep == bus->sdiodev->sleeping)
 			goto end;
 
 		/* Going to sleep */
@@ -1045,12 +1050,7 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok)
 			bus->idlecount = 0;
 			err = brcmf_sdio_kso_control(bus, true);
 		}
-		if (!err) {
-			/* Change state */
-			bus->sleeping = sleep;
-			brcmf_dbg(SDIO, "new state %s\n",
-				  (sleep ? "SLEEP" : "WAKE"));
-		} else {
+		if (err) {
 			brcmf_err("error while changing bus sleep state %d\n",
 				  err);
 			goto done;
@@ -1065,6 +1065,11 @@ end:
 	} else {
 		brcmf_sdio_clkctl(bus, CLK_AVAIL, pendok);
 	}
+	bus->sdiodev->sleeping = sleep;
+	if (sleep)
+		wake_up(&bus->sdiodev->idle_wait);
+	brcmf_dbg(SDIO, "new state %s\n",
+		  (sleep ? "SLEEP" : "WAKE"));
 done:
 	brcmf_dbg(SDIO, "Exit: err=%d\n", err);
 	return err;
@@ -1904,7 +1909,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 	bus->rxpending = true;
 
 	for (rd->seq_num = bus->rx_seq, rxleft = maxframes;
-	     !bus->rxskip && rxleft && brcmf_bus_ready(bus->sdiodev->bus_if);
+	     !bus->rxskip && rxleft && bus->sdiodev->state == BRCMF_STATE_DATA;
 	     rd->seq_num++, rxleft--) {
 
 		/* Handle glomming separately */
@@ -2371,8 +2376,6 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes)
 	/* Send frames until the limit or some other event */
 	for (cnt = 0; (cnt < maxframes) && data_ok(bus);) {
 		pkt_num = 1;
-		if (down_interruptible(&bus->tx_seq_lock))
-			return cnt;
 		if (bus->txglom)
 			pkt_num = min_t(u8, bus->tx_max - bus->tx_seq,
 					bus->sdiodev->txglomsz);
@@ -2388,13 +2391,10 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes)
 			__skb_queue_tail(&pktq, pkt);
 		}
 		spin_unlock_bh(&bus->txq_lock);
-		if (i == 0) {
-			up(&bus->tx_seq_lock);
+		if (i == 0)
 			break;
-		}
 
 		ret = brcmf_sdio_txpkt(bus, &pktq, SDPCM_DATA_CHANNEL);
-		up(&bus->tx_seq_lock);
 
 		cnt += i;
 
@@ -2415,7 +2415,7 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes)
 	}
 
 	/* Deflow-control stack if needed */
-	if ((bus->sdiodev->bus_if->state == BRCMF_BUS_DATA) &&
+	if ((bus->sdiodev->state == BRCMF_STATE_DATA) &&
 	    bus->txoff && (pktq_len(&bus->txq) < TXLOW)) {
 		bus->txoff = false;
 		brcmf_txflowblock(bus->sdiodev->dev, false);
@@ -2503,7 +2503,7 @@ static void brcmf_sdio_bus_stop(struct device *dev)
 		bus->watchdog_tsk = NULL;
 	}
 
-	if (bus_if->state == BRCMF_BUS_DOWN) {
+	if (sdiodev->state != BRCMF_STATE_NOMEDIUM) {
 		sdio_claim_host(sdiodev->func[1]);
 
 		/* Enable clock for device interrupts */
@@ -2538,8 +2538,7 @@ static void brcmf_sdio_bus_stop(struct device *dev)
 	brcmu_pktq_flush(&bus->txq, true, NULL, NULL);
 
 	/* Clear any held glomming stuff */
-	if (bus->glomd)
-		brcmu_pkt_buf_free_skb(bus->glomd);
+	brcmu_pkt_buf_free_skb(bus->glomd);
 	brcmf_sdio_free_glom(bus);
 
 	/* Clear rx control and wake any waiters */
@@ -2604,6 +2603,21 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
 	return ret;
 }
 
+static int brcmf_sdio_pm_resume_wait(struct brcmf_sdio_dev *sdiodev)
+{
+#ifdef CONFIG_PM_SLEEP
+	int retry;
+
+	/* Wait for possible resume to complete */
+	retry = 0;
+	while ((atomic_read(&sdiodev->suspend)) && (retry++ != 50))
+		msleep(20);
+	if (atomic_read(&sdiodev->suspend))
+		return -EIO;
+#endif
+	return 0;
+}
+
 static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 {
 	u32 newstatus = 0;
@@ -2614,6 +2628,9 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 
 	brcmf_dbg(TRACE, "Enter\n");
 
+	if (brcmf_sdio_pm_resume_wait(bus->sdiodev))
+		return;
+
 	sdio_claim_host(bus->sdiodev->func[1]);
 
 	/* If waiting for HTAVAIL, check status */
@@ -2720,17 +2737,14 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 	brcmf_sdio_clrintr(bus);
 
 	if (bus->ctrl_frame_stat && (bus->clkstate == CLK_AVAIL) &&
-	    (down_interruptible(&bus->tx_seq_lock) == 0)) {
-		if (data_ok(bus)) {
-			sdio_claim_host(bus->sdiodev->func[1]);
-			err = brcmf_sdio_tx_ctrlframe(bus,  bus->ctrl_frame_buf,
-						      bus->ctrl_frame_len);
-			sdio_release_host(bus->sdiodev->func[1]);
-
-			bus->ctrl_frame_stat = false;
-			brcmf_sdio_wait_event_wakeup(bus);
-		}
-		up(&bus->tx_seq_lock);
+	    data_ok(bus)) {
+		sdio_claim_host(bus->sdiodev->func[1]);
+		err = brcmf_sdio_tx_ctrlframe(bus,  bus->ctrl_frame_buf,
+					      bus->ctrl_frame_len);
+		sdio_release_host(bus->sdiodev->func[1]);
+		bus->ctrl_frame_err = err;
+		bus->ctrl_frame_stat = false;
+		brcmf_sdio_wait_event_wakeup(bus);
 	}
 	/* Send queued frames (limit 1 if rx may still be pending) */
 	if ((bus->clkstate == CLK_AVAIL) && !atomic_read(&bus->fcstate) &&
@@ -2741,7 +2755,7 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 		brcmf_sdio_sendfromq(bus, framecnt);
 	}
 
-	if (!brcmf_bus_ready(bus->sdiodev->bus_if) || (err != 0)) {
+	if ((bus->sdiodev->state != BRCMF_STATE_DATA) || (err != 0)) {
 		brcmf_err("failed backplane access over SDIO, halting operation\n");
 		atomic_set(&bus->intstatus, 0);
 	} else if (atomic_read(&bus->intstatus) ||
@@ -2942,43 +2956,30 @@ brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
 	struct brcmf_sdio *bus = sdiodev->bus;
-	int ret = -1;
+	int ret;
 
 	brcmf_dbg(TRACE, "Enter\n");
 
-	if (down_interruptible(&bus->tx_seq_lock))
-		return -EINTR;
-
-	if (!data_ok(bus)) {
-		brcmf_dbg(INFO, "No bus credit bus->tx_max %d, bus->tx_seq %d\n",
-			  bus->tx_max, bus->tx_seq);
-		up(&bus->tx_seq_lock);
-		/* Send from dpc */
-		bus->ctrl_frame_buf = msg;
-		bus->ctrl_frame_len = msglen;
-		bus->ctrl_frame_stat = true;
-
-		wait_event_interruptible_timeout(bus->ctrl_wait,
-						 !bus->ctrl_frame_stat,
-						 msecs_to_jiffies(2000));
-
-		if (!bus->ctrl_frame_stat) {
-			brcmf_dbg(SDIO, "ctrl_frame_stat == false\n");
-			ret = 0;
-		} else {
-			brcmf_dbg(SDIO, "ctrl_frame_stat == true\n");
-			bus->ctrl_frame_stat = false;
-			if (down_interruptible(&bus->tx_seq_lock))
-				return -EINTR;
-			ret = -1;
-		}
+	/* Send from dpc */
+	bus->ctrl_frame_buf = msg;
+	bus->ctrl_frame_len = msglen;
+	bus->ctrl_frame_stat = true;
+	if (atomic_read(&bus->dpc_tskcnt) == 0) {
+		atomic_inc(&bus->dpc_tskcnt);
+		queue_work(bus->brcmf_wq, &bus->datawork);
 	}
-	if (ret == -1) {
-		sdio_claim_host(bus->sdiodev->func[1]);
-		brcmf_sdio_bus_sleep(bus, false, false);
-		ret = brcmf_sdio_tx_ctrlframe(bus, msg, msglen);
-		sdio_release_host(bus->sdiodev->func[1]);
-		up(&bus->tx_seq_lock);
+
+	wait_event_interruptible_timeout(bus->ctrl_wait, !bus->ctrl_frame_stat,
+					 msecs_to_jiffies(CTL_DONE_TIMEOUT));
+
+	if (!bus->ctrl_frame_stat) {
+		brcmf_dbg(SDIO, "ctrl_frame complete, err=%d\n",
+			  bus->ctrl_frame_err);
+		ret = bus->ctrl_frame_err;
+	} else {
+		brcmf_dbg(SDIO, "ctrl_frame timeout\n");
+		bus->ctrl_frame_stat = false;
+		ret = -ETIMEDOUT;
 	}
 
 	if (ret)
@@ -2986,7 +2987,7 @@ brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
 	else
 		bus->sdcnt.tx_ctlpkts++;
 
-	return ret ? -EIO : 0;
+	return ret;
 }
 
 #ifdef DEBUG
@@ -3409,8 +3410,8 @@ static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus,
 		goto err;
 	}
 
-	/* Allow HT Clock now that the ARM is running. */
-	brcmf_bus_change_state(bus->sdiodev->bus_if, BRCMF_BUS_LOAD);
+	/* Allow full data communication using DPC from now on. */
+	bus->sdiodev->state = BRCMF_STATE_DATA;
 	bcmerror = 0;
 
 err:
@@ -3556,7 +3557,7 @@ void brcmf_sdio_isr(struct brcmf_sdio *bus)
 		return;
 	}
 
-	if (!brcmf_bus_ready(bus->sdiodev->bus_if)) {
+	if (bus->sdiodev->state != BRCMF_STATE_DATA) {
 		brcmf_err("bus is down. we have nothing to do\n");
 		return;
 	}
@@ -3579,10 +3580,6 @@ void brcmf_sdio_isr(struct brcmf_sdio *bus)
 
 static bool brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
 {
-#ifdef DEBUG
-	struct brcmf_bus *bus_if = dev_get_drvdata(bus->sdiodev->dev);
-#endif	/* DEBUG */
-
 	brcmf_dbg(TIMER, "Enter\n");
 
 	/* Poll period: check device if appropriate. */
@@ -3626,7 +3623,7 @@ static bool brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
 	}
 #ifdef DEBUG
 	/* Poll for console output periodically */
-	if (bus_if && bus_if->state == BRCMF_BUS_DATA &&
+	if (bus->sdiodev->state == BRCMF_STATE_DATA &&
 	    bus->console_interval != 0) {
 		bus->console.count += BRCMF_WD_POLL_MS;
 		if (bus->console.count >= bus->console_interval) {
@@ -3811,7 +3808,7 @@ static u32 brcmf_sdio_buscore_read32(void *ctx, u32 addr)
 	u32 val, rev;
 
 	val = brcmf_sdiod_regrl(sdiodev, addr, NULL);
-	if (sdiodev->func[0]->device == BRCM_SDIO_4335_4339_DEVICE_ID &&
+	if (sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 &&
 	    addr == CORE_CC_REG(SI_ENUM_BASE, chipid)) {
 		rev = (val & CID_REV_MASK) >> CID_REV_SHIFT;
 		if (rev >= 2) {
@@ -3867,11 +3864,6 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 		goto fail;
 	}
 
-	/* SDIO register access works so moving
-	 * state from UNKNOWN to DOWN.
-	 */
-	brcmf_bus_change_state(bus->sdiodev->bus_if, BRCMF_BUS_DOWN);
-
 	bus->ci = brcmf_chip_attach(bus->sdiodev, &brcmf_sdio_buscore_ops);
 	if (IS_ERR(bus->ci)) {
 		brcmf_err("brcmf_chip_attach failed!\n");
@@ -4005,18 +3997,16 @@ static void brcmf_sdio_firmware_callback(struct device *dev,
 
 	brcmf_dbg(TRACE, "Enter: dev=%s\n", dev_name(dev));
 
-	/* try to download image and nvram to the dongle */
-	if (bus_if->state == BRCMF_BUS_DOWN) {
-		bus->alp_only = true;
-		err = brcmf_sdio_download_firmware(bus, code, nvram, nvram_len);
-		if (err)
-			goto fail;
-		bus->alp_only = false;
-	}
-
 	if (!bus_if->drvr)
 		return;
 
+	/* try to download image and nvram to the dongle */
+	bus->alp_only = true;
+	err = brcmf_sdio_download_firmware(bus, code, nvram, nvram_len);
+	if (err)
+		goto fail;
+	bus->alp_only = false;
+
 	/* Start the watchdog timer */
 	bus->sdcnt.tickcnt = 0;
 	brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
@@ -4142,7 +4132,6 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
 
 	spin_lock_init(&bus->rxctl_lock);
 	spin_lock_init(&bus->txq_lock);
-	sema_init(&bus->tx_seq_lock, 1);
 	init_waitqueue_head(&bus->ctrl_wait);
 	init_waitqueue_head(&bus->dcmd_resp_wait);
 
@@ -4213,7 +4202,6 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
 	bus->idleclock = BRCMF_IDLE_ACTIVE;
 
 	/* SR state */
-	bus->sleeping = false;
 	bus->sr_enabled = false;
 
 	brcmf_sdio_debugfs_create(bus);
@@ -4254,7 +4242,7 @@ void brcmf_sdio_remove(struct brcmf_sdio *bus)
 			destroy_workqueue(bus->brcmf_wq);
 
 		if (bus->ci) {
-			if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) {
+			if (bus->sdiodev->state != BRCMF_STATE_NOMEDIUM) {
 				sdio_claim_host(bus->sdiodev->func[1]);
 				brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
 				/* Leave the device in state where it is
@@ -4289,7 +4277,7 @@ void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, uint wdtick)
 	}
 
 	/* don't start the wd until fw is loaded */
-	if (bus->sdiodev->bus_if->state != BRCMF_BUS_DATA)
+	if (bus->sdiodev->state != BRCMF_STATE_DATA)
 		return;
 
 	if (wdtick) {