Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking changes from David Miller:

 1) Get rid of the error prone NLA_PUT*() macros that used an embedded
    goto.

 2) Kill off the token-ring and MCA networking drivers, from Paul
    Gortmaker.

 3) Reduce high-order allocations made by datagram AF_UNIX sockets, from
    Eric Dumazet.

 4) Add PTP hardware clock support to IGB and IXGBE, from Richard
    Cochran and Jacob Keller.

 5) Allow users to query timestamping capabilities of a card via
    ethtool, from Richard Cochran.

 6) Add loadbalance mode to the teaming driver, from Jiri Pirko.  Part
    of this is that we can now have BPF filters not attached to sockets,
    and the loadbalancing function is calculated using one.

 7) Francois Romieu went through the network drivers removing gratuitous
    uses of netdev->base_addr, perhaps some day we can remove it
    completely but it's used for ISA probing still.

 8) Add a BPF JIT for sparc.  I know, who cares, right? :-)

 9) Move networking sysctl registry away from using the compatability
    mode interfaces in the sysctl code.  From Eric W Biederman.

10) Pavel Emelyanov added a way to save and restore TCP socket state via
    TCP_REPAIR, TCP_REPAIR_QUEUE, and TCP_QUEUE_SEQ socket options as
    well as a way to forcefully bind a socket to a port via the
    sk->sk_reuse value SK_FORCE_REUSE.  There is also a
    TCP_REPAIR_OPTIONS which allows to reinstante the TCP options
    enabled on the connection.

11) Several enhancements from Eric Dumazet that, in particular, can
    enhance splice performance on TCP sockets significantly.

     a) Reset the offset of the per-socket sendmsg page when we know
        we're the only use of the page in linear_to_page().

     b) Add facilities such that skb->data can be backed a page rather
        than SLAB kmalloc'd memory.  In particular devices which were
        receiving into linear RX buffers can now end up providing paged
        data.

    The big result is that code like splice and GRO do not have to copy
    any more.

12) Allow a pure sender to more gracefully handle ACK backlogs in TCP.
    What can happen at high rates is that the sender hasn't grown his
    receive buffer limits at all (he's not receiving data so really
    doesn't need to), but the non-data ACKs consume receive buffer
    space.

    sk_add_backlog() is too aggressive in dropping frames in this case,
    so relax it's requirements by using the receive buffer plus the send
    buffer limit as the backlog limit instead of just the former.

    Also from Eric Dumazet.

13) Add ipv6 support to L2TP, from Benjamin LaHaise, James Chapman, and
    Chris Elston.

14) Implement TCP early retransmit (RFC 5827), from Yuchung Cheng.
    Basically, we can start fast retransmit before hiting the dupack
    threshold under certain conditions.

15) New CODEL active queue management packet scheduler, from Eric
    Dumazet based upon initial work by Dave Taht.

    Basically, the big feature is that packets are dropped (or ECN bits
    are set) based upon how long packets live in the queue, rather than
    the queue length (which is what RED uses).

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1341 commits)
  drivers/net/stmmac: seq_file fix memory leak
  ipv6/exthdrs: strict Pad1 and PadN check
  USB: qmi_wwan: Add ZTE (Vodafone) K3520-Z
  USB: qmi_wwan: Add ZTE (Vodafone) K3765-Z
  USB: qmi_wwan: Make forced int 4 whitelist generic
  net/ipv4: replace simple_strtoul with kstrtoul
  net/ipv4/ipconfig: neaten __setup placement
  net: qmi_wwan: Add Vodafone/Huawei K5005 support
  net: cdc_ether: Add ZTE WWAN matches before generic Ethernet
  ipv6: use skb coalescing in reassembly
  ipv4: use skb coalescing in defragmentation
  net: introduce skb_try_coalesce()
  net:ipv6:fixed space issues relating to operators.
  net:ipv6:fixed a trailing white space issue.
  ipv6: disable GSO on sockets hitting dst_allfrag
  tg3: use netdev_alloc_frag() API
  net: napi_frags_skb() is static
  ppp: avoid false drop_monitor false positives
  ipv6: bool/const conversions phase2
  ipx: Remove spurious NULL checking in ipx_ioctl().
  ...

1 files changed, 755 insertions, 0 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-devices.c b/drivers/net/wireless/iwlwifi/iwl-agn-devices.c
new file mode 100644
index 000000000000..48533b3a0f9a
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-devices.c
@@ -0,0 +1,755 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+/*
+ * DVM device-specific data & functions
+ */
+#include "iwl-agn.h"
+#include "iwl-dev.h"
+#include "iwl-commands.h"
+#include "iwl-io.h"
+#include "iwl-prph.h"
+
+/*
+ * 1000 series
+ * ===========
+ */
+
+/*
+ * For 1000, use advance thermal throttling critical temperature threshold,
+ * but legacy thermal management implementation for now.
+ * This is for the reason of 1000 uCode using advance thermal throttling API
+ * but not implement ct_kill_exit based on ct_kill exit temperature
+ * so the thermal throttling will still based on legacy thermal throttling
+ * management.
+ * The code here need to be modified once 1000 uCode has the advanced thermal
+ * throttling algorithm in place
+ */
+static void iwl1000_set_ct_threshold(struct iwl_priv *priv)
+{
+	/* want Celsius */
+	priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
+	priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
+}
+
+/* NIC configuration for 1000 series */
+static void iwl1000_nic_config(struct iwl_priv *priv)
+{
+	/* set CSR_HW_CONFIG_REG for uCode use */
+	iwl_set_bit(priv->trans, CSR_HW_IF_CONFIG_REG,
+		    CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
+		    CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
+
+	/* Setting digital SVR for 1000 card to 1.32V */
+	/* locking is acquired in iwl_set_bits_mask_prph() function */
+	iwl_set_bits_mask_prph(priv->trans, APMG_DIGITAL_SVR_REG,
+				APMG_SVR_DIGITAL_VOLTAGE_1_32,
+				~APMG_SVR_VOLTAGE_CONFIG_BIT_MSK);
+}
+
+/**
+ * iwl_beacon_time_mask_low - mask of lower 32 bit of beacon time
+ * @priv -- pointer to iwl_priv data structure
+ * @tsf_bits -- number of bits need to shift for masking)
+ */
+static inline u32 iwl_beacon_time_mask_low(struct iwl_priv *priv,
+					   u16 tsf_bits)
+{
+	return (1 << tsf_bits) - 1;
+}
+
+/**
+ * iwl_beacon_time_mask_high - mask of higher 32 bit of beacon time
+ * @priv -- pointer to iwl_priv data structure
+ * @tsf_bits -- number of bits need to shift for masking)
+ */
+static inline u32 iwl_beacon_time_mask_high(struct iwl_priv *priv,
+					    u16 tsf_bits)
+{
+	return ((1 << (32 - tsf_bits)) - 1) << tsf_bits;
+}
+
+/*
+ * extended beacon time format
+ * time in usec will be changed into a 32-bit value in extended:internal format
+ * the extended part is the beacon counts
+ * the internal part is the time in usec within one beacon interval
+ */
+static u32 iwl_usecs_to_beacons(struct iwl_priv *priv, u32 usec,
+				u32 beacon_interval)
+{
+	u32 quot;
+	u32 rem;
+	u32 interval = beacon_interval * TIME_UNIT;
+
+	if (!interval || !usec)
+		return 0;
+
+	quot = (usec / interval) &
+		(iwl_beacon_time_mask_high(priv, IWLAGN_EXT_BEACON_TIME_POS) >>
+		IWLAGN_EXT_BEACON_TIME_POS);
+	rem = (usec % interval) & iwl_beacon_time_mask_low(priv,
+				   IWLAGN_EXT_BEACON_TIME_POS);
+
+	return (quot << IWLAGN_EXT_BEACON_TIME_POS) + rem;
+}
+
+/* base is usually what we get from ucode with each received frame,
+ * the same as HW timer counter counting down
+ */
+static __le32 iwl_add_beacon_time(struct iwl_priv *priv, u32 base,
+			   u32 addon, u32 beacon_interval)
+{
+	u32 base_low = base & iwl_beacon_time_mask_low(priv,
+				IWLAGN_EXT_BEACON_TIME_POS);
+	u32 addon_low = addon & iwl_beacon_time_mask_low(priv,
+				IWLAGN_EXT_BEACON_TIME_POS);
+	u32 interval = beacon_interval * TIME_UNIT;
+	u32 res = (base & iwl_beacon_time_mask_high(priv,
+				IWLAGN_EXT_BEACON_TIME_POS)) +
+				(addon & iwl_beacon_time_mask_high(priv,
+				IWLAGN_EXT_BEACON_TIME_POS));
+
+	if (base_low > addon_low)
+		res += base_low - addon_low;
+	else if (base_low < addon_low) {
+		res += interval + base_low - addon_low;
+		res += (1 << IWLAGN_EXT_BEACON_TIME_POS);
+	} else
+		res += (1 << IWLAGN_EXT_BEACON_TIME_POS);
+
+	return cpu_to_le32(res);
+}
+
+static const struct iwl_sensitivity_ranges iwl1000_sensitivity = {
+	.min_nrg_cck = 95,
+	.auto_corr_min_ofdm = 90,
+	.auto_corr_min_ofdm_mrc = 170,
+	.auto_corr_min_ofdm_x1 = 120,
+	.auto_corr_min_ofdm_mrc_x1 = 240,
+
+	.auto_corr_max_ofdm = 120,
+	.auto_corr_max_ofdm_mrc = 210,
+	.auto_corr_max_ofdm_x1 = 155,
+	.auto_corr_max_ofdm_mrc_x1 = 290,
+
+	.auto_corr_min_cck = 125,
+	.auto_corr_max_cck = 200,
+	.auto_corr_min_cck_mrc = 170,
+	.auto_corr_max_cck_mrc = 400,
+	.nrg_th_cck = 95,
+	.nrg_th_ofdm = 95,
+
+	.barker_corr_th_min = 190,
+	.barker_corr_th_min_mrc = 390,
+	.nrg_th_cca = 62,
+};
+
+static void iwl1000_hw_set_hw_params(struct iwl_priv *priv)
+{
+	priv->hw_params.ht40_channel =  BIT(IEEE80211_BAND_2GHZ);
+
+	priv->hw_params.tx_chains_num =
+		num_of_ant(priv->hw_params.valid_tx_ant);
+	if (priv->cfg->rx_with_siso_diversity)
+		priv->hw_params.rx_chains_num = 1;
+	else
+		priv->hw_params.rx_chains_num =
+			num_of_ant(priv->hw_params.valid_rx_ant);
+
+	iwl1000_set_ct_threshold(priv);
+
+	/* Set initial sensitivity parameters */
+	priv->hw_params.sens = &iwl1000_sensitivity;
+}
+
+struct iwl_lib_ops iwl1000_lib = {
+	.set_hw_params = iwl1000_hw_set_hw_params,
+	.nic_config = iwl1000_nic_config,
+	.eeprom_ops = {
+		.regulatory_bands = {
+			EEPROM_REG_BAND_1_CHANNELS,
+			EEPROM_REG_BAND_2_CHANNELS,
+			EEPROM_REG_BAND_3_CHANNELS,
+			EEPROM_REG_BAND_4_CHANNELS,
+			EEPROM_REG_BAND_5_CHANNELS,
+			EEPROM_REG_BAND_24_HT40_CHANNELS,
+			EEPROM_REGULATORY_BAND_NO_HT40,
+		},
+	},
+	.temperature = iwlagn_temperature,
+};
+
+
+/*
+ * 2000 series
+ * ===========
+ */
+
+static void iwl2000_set_ct_threshold(struct iwl_priv *priv)
+{
+	/* want Celsius */
+	priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
+	priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
+}
+
+/* NIC configuration for 2000 series */
+static void iwl2000_nic_config(struct iwl_priv *priv)
+{
+	iwl_rf_config(priv);
+
+	iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG,
+		    CSR_GP_DRIVER_REG_BIT_RADIO_IQ_INVER);
+}
+
+static const struct iwl_sensitivity_ranges iwl2000_sensitivity = {
+	.min_nrg_cck = 97,
+	.auto_corr_min_ofdm = 80,
+	.auto_corr_min_ofdm_mrc = 128,
+	.auto_corr_min_ofdm_x1 = 105,
+	.auto_corr_min_ofdm_mrc_x1 = 192,
+
+	.auto_corr_max_ofdm = 145,
+	.auto_corr_max_ofdm_mrc = 232,
+	.auto_corr_max_ofdm_x1 = 110,
+	.auto_corr_max_ofdm_mrc_x1 = 232,
+
+	.auto_corr_min_cck = 125,
+	.auto_corr_max_cck = 175,
+	.auto_corr_min_cck_mrc = 160,
+	.auto_corr_max_cck_mrc = 310,
+	.nrg_th_cck = 97,
+	.nrg_th_ofdm = 100,
+
+	.barker_corr_th_min = 190,
+	.barker_corr_th_min_mrc = 390,
+	.nrg_th_cca = 62,
+};
+
+static void iwl2000_hw_set_hw_params(struct iwl_priv *priv)
+{
+	priv->hw_params.ht40_channel =  BIT(IEEE80211_BAND_2GHZ);
+
+	priv->hw_params.tx_chains_num =
+		num_of_ant(priv->hw_params.valid_tx_ant);
+	if (priv->cfg->rx_with_siso_diversity)
+		priv->hw_params.rx_chains_num = 1;
+	else
+		priv->hw_params.rx_chains_num =
+			num_of_ant(priv->hw_params.valid_rx_ant);
+
+	iwl2000_set_ct_threshold(priv);
+
+	/* Set initial sensitivity parameters */
+	priv->hw_params.sens = &iwl2000_sensitivity;
+}
+
+struct iwl_lib_ops iwl2000_lib = {
+	.set_hw_params = iwl2000_hw_set_hw_params,
+	.nic_config = iwl2000_nic_config,
+	.eeprom_ops = {
+		.regulatory_bands = {
+			EEPROM_REG_BAND_1_CHANNELS,
+			EEPROM_REG_BAND_2_CHANNELS,
+			EEPROM_REG_BAND_3_CHANNELS,
+			EEPROM_REG_BAND_4_CHANNELS,
+			EEPROM_REG_BAND_5_CHANNELS,
+			EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
+			EEPROM_REGULATORY_BAND_NO_HT40,
+		},
+		.enhanced_txpower = true,
+	},
+	.temperature = iwlagn_temperature,
+};
+
+struct iwl_lib_ops iwl2030_lib = {
+	.set_hw_params = iwl2000_hw_set_hw_params,
+	.nic_config = iwl2000_nic_config,
+	.eeprom_ops = {
+		.regulatory_bands = {
+			EEPROM_REG_BAND_1_CHANNELS,
+			EEPROM_REG_BAND_2_CHANNELS,
+			EEPROM_REG_BAND_3_CHANNELS,
+			EEPROM_REG_BAND_4_CHANNELS,
+			EEPROM_REG_BAND_5_CHANNELS,
+			EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
+			EEPROM_REGULATORY_BAND_NO_HT40,
+		},
+		.enhanced_txpower = true,
+	},
+	.temperature = iwlagn_temperature,
+};
+
+/*
+ * 5000 series
+ * ===========
+ */
+
+/* NIC configuration for 5000 series */
+static void iwl5000_nic_config(struct iwl_priv *priv)
+{
+	iwl_rf_config(priv);
+
+	/* W/A : NIC is stuck in a reset state after Early PCIe power off
+	 * (PCIe power is lost before PERST# is asserted),
+	 * causing ME FW to lose ownership and not being able to obtain it back.
+	 */
+	iwl_set_bits_mask_prph(priv->trans, APMG_PS_CTRL_REG,
+				APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS,
+				~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS);
+}
+
+static const struct iwl_sensitivity_ranges iwl5000_sensitivity = {
+	.min_nrg_cck = 100,
+	.auto_corr_min_ofdm = 90,
+	.auto_corr_min_ofdm_mrc = 170,
+	.auto_corr_min_ofdm_x1 = 105,
+	.auto_corr_min_ofdm_mrc_x1 = 220,
+
+	.auto_corr_max_ofdm = 120,
+	.auto_corr_max_ofdm_mrc = 210,
+	.auto_corr_max_ofdm_x1 = 120,
+	.auto_corr_max_ofdm_mrc_x1 = 240,
+
+	.auto_corr_min_cck = 125,
+	.auto_corr_max_cck = 200,
+	.auto_corr_min_cck_mrc = 200,
+	.auto_corr_max_cck_mrc = 400,
+	.nrg_th_cck = 100,
+	.nrg_th_ofdm = 100,
+
+	.barker_corr_th_min = 190,
+	.barker_corr_th_min_mrc = 390,
+	.nrg_th_cca = 62,
+};
+
+static struct iwl_sensitivity_ranges iwl5150_sensitivity = {
+	.min_nrg_cck = 95,
+	.auto_corr_min_ofdm = 90,
+	.auto_corr_min_ofdm_mrc = 170,
+	.auto_corr_min_ofdm_x1 = 105,
+	.auto_corr_min_ofdm_mrc_x1 = 220,
+
+	.auto_corr_max_ofdm = 120,
+	.auto_corr_max_ofdm_mrc = 210,
+	/* max = min for performance bug in 5150 DSP */
+	.auto_corr_max_ofdm_x1 = 105,
+	.auto_corr_max_ofdm_mrc_x1 = 220,
+
+	.auto_corr_min_cck = 125,
+	.auto_corr_max_cck = 200,
+	.auto_corr_min_cck_mrc = 170,
+	.auto_corr_max_cck_mrc = 400,
+	.nrg_th_cck = 95,
+	.nrg_th_ofdm = 95,
+
+	.barker_corr_th_min = 190,
+	.barker_corr_th_min_mrc = 390,
+	.nrg_th_cca = 62,
+};
+
+#define IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF	(-5)
+
+static s32 iwl_temp_calib_to_offset(struct iwl_priv *priv)
+{
+	u16 temperature, voltage;
+	__le16 *temp_calib = (__le16 *)iwl_eeprom_query_addr(priv,
+				EEPROM_KELVIN_TEMPERATURE);
+
+	temperature = le16_to_cpu(temp_calib[0]);
+	voltage = le16_to_cpu(temp_calib[1]);
+
+	/* offset = temp - volt / coeff */
+	return (s32)(temperature -
+			voltage / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF);
+}
+
+static void iwl5150_set_ct_threshold(struct iwl_priv *priv)
+{
+	const s32 volt2temp_coef = IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF;
+	s32 threshold = (s32)CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY) -
+			iwl_temp_calib_to_offset(priv);
+
+	priv->hw_params.ct_kill_threshold = threshold * volt2temp_coef;
+}
+
+static void iwl5000_set_ct_threshold(struct iwl_priv *priv)
+{
+	/* want Celsius */
+	priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
+}
+
+static void iwl5000_hw_set_hw_params(struct iwl_priv *priv)
+{
+	priv->hw_params.ht40_channel =  BIT(IEEE80211_BAND_2GHZ) |
+					BIT(IEEE80211_BAND_5GHZ);
+
+	priv->hw_params.tx_chains_num =
+		num_of_ant(priv->hw_params.valid_tx_ant);
+	priv->hw_params.rx_chains_num =
+		num_of_ant(priv->hw_params.valid_rx_ant);
+
+	iwl5000_set_ct_threshold(priv);
+
+	/* Set initial sensitivity parameters */
+	priv->hw_params.sens = &iwl5000_sensitivity;
+}
+
+static void iwl5150_hw_set_hw_params(struct iwl_priv *priv)
+{
+	priv->hw_params.ht40_channel =  BIT(IEEE80211_BAND_2GHZ) |
+					BIT(IEEE80211_BAND_5GHZ);
+
+	priv->hw_params.tx_chains_num =
+		num_of_ant(priv->hw_params.valid_tx_ant);
+	priv->hw_params.rx_chains_num =
+		num_of_ant(priv->hw_params.valid_rx_ant);
+
+	iwl5150_set_ct_threshold(priv);
+
+	/* Set initial sensitivity parameters */
+	priv->hw_params.sens = &iwl5150_sensitivity;
+}
+
+static void iwl5150_temperature(struct iwl_priv *priv)
+{
+	u32 vt = 0;
+	s32 offset =  iwl_temp_calib_to_offset(priv);
+
+	vt = le32_to_cpu(priv->statistics.common.temperature);
+	vt = vt / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF + offset;
+	/* now vt hold the temperature in Kelvin */
+	priv->temperature = KELVIN_TO_CELSIUS(vt);
+	iwl_tt_handler(priv);
+}
+
+static int iwl5000_hw_channel_switch(struct iwl_priv *priv,
+				     struct ieee80211_channel_switch *ch_switch)
+{
+	/*
+	 * MULTI-FIXME
+	 * See iwlagn_mac_channel_switch.
+	 */
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+	struct iwl5000_channel_switch_cmd cmd;
+	const struct iwl_channel_info *ch_info;
+	u32 switch_time_in_usec, ucode_switch_time;
+	u16 ch;
+	u32 tsf_low;
+	u8 switch_count;
+	u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
+	struct ieee80211_vif *vif = ctx->vif;
+	struct iwl_host_cmd hcmd = {
+		.id = REPLY_CHANNEL_SWITCH,
+		.len = { sizeof(cmd), },
+		.flags = CMD_SYNC,
+		.data = { &cmd, },
+	};
+
+	cmd.band = priv->band == IEEE80211_BAND_2GHZ;
+	ch = ch_switch->channel->hw_value;
+	IWL_DEBUG_11H(priv, "channel switch from %d to %d\n",
+		      ctx->active.channel, ch);
+	cmd.channel = cpu_to_le16(ch);
+	cmd.rxon_flags = ctx->staging.flags;
+	cmd.rxon_filter_flags = ctx->staging.filter_flags;
+	switch_count = ch_switch->count;
+	tsf_low = ch_switch->timestamp & 0x0ffffffff;
+	/*
+	 * calculate the ucode channel switch time
+	 * adding TSF as one of the factor for when to switch
+	 */
+	if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
+		if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
+		    beacon_interval)) {
+			switch_count -= (priv->ucode_beacon_time -
+				tsf_low) / beacon_interval;
+		} else
+			switch_count = 0;
+	}
+	if (switch_count <= 1)
+		cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
+	else {
+		switch_time_in_usec =
+			vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
+		ucode_switch_time = iwl_usecs_to_beacons(priv,
+							 switch_time_in_usec,
+							 beacon_interval);
+		cmd.switch_time = iwl_add_beacon_time(priv,
+						      priv->ucode_beacon_time,
+						      ucode_switch_time,
+						      beacon_interval);
+	}
+	IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
+		      cmd.switch_time);
+	ch_info = iwl_get_channel_info(priv, priv->band, ch);
+	if (ch_info)
+		cmd.expect_beacon = is_channel_radar(ch_info);
+	else {
+		IWL_ERR(priv, "invalid channel switch from %u to %u\n",
+			ctx->active.channel, ch);
+		return -EFAULT;
+	}
+
+	return iwl_dvm_send_cmd(priv, &hcmd);
+}
+
+struct iwl_lib_ops iwl5000_lib = {
+	.set_hw_params = iwl5000_hw_set_hw_params,
+	.set_channel_switch = iwl5000_hw_channel_switch,
+	.nic_config = iwl5000_nic_config,
+	.eeprom_ops = {
+		.regulatory_bands = {
+			EEPROM_REG_BAND_1_CHANNELS,
+			EEPROM_REG_BAND_2_CHANNELS,
+			EEPROM_REG_BAND_3_CHANNELS,
+			EEPROM_REG_BAND_4_CHANNELS,
+			EEPROM_REG_BAND_5_CHANNELS,
+			EEPROM_REG_BAND_24_HT40_CHANNELS,
+			EEPROM_REG_BAND_52_HT40_CHANNELS
+		},
+	},
+	.temperature = iwlagn_temperature,
+};
+
+struct iwl_lib_ops iwl5150_lib = {
+	.set_hw_params = iwl5150_hw_set_hw_params,
+	.set_channel_switch = iwl5000_hw_channel_switch,
+	.nic_config = iwl5000_nic_config,
+	.eeprom_ops = {
+		.regulatory_bands = {
+			EEPROM_REG_BAND_1_CHANNELS,
+			EEPROM_REG_BAND_2_CHANNELS,
+			EEPROM_REG_BAND_3_CHANNELS,
+			EEPROM_REG_BAND_4_CHANNELS,
+			EEPROM_REG_BAND_5_CHANNELS,
+			EEPROM_REG_BAND_24_HT40_CHANNELS,
+			EEPROM_REG_BAND_52_HT40_CHANNELS
+		},
+	},
+	.temperature = iwl5150_temperature,
+};
+
+
+
+/*
+ * 6000 series
+ * ===========
+ */
+
+static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
+{
+	/* want Celsius */
+	priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
+	priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
+}
+
+/* NIC configuration for 6000 series */
+static void iwl6000_nic_config(struct iwl_priv *priv)
+{
+	iwl_rf_config(priv);
+
+	switch (priv->cfg->device_family) {
+	case IWL_DEVICE_FAMILY_6005:
+	case IWL_DEVICE_FAMILY_6030:
+	case IWL_DEVICE_FAMILY_6000:
+		break;
+	case IWL_DEVICE_FAMILY_6000i:
+		/* 2x2 IPA phy type */
+		iwl_write32(priv->trans, CSR_GP_DRIVER_REG,
+			     CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA);
+		break;
+	case IWL_DEVICE_FAMILY_6050:
+		/* Indicate calibration version to uCode. */
+		if (iwl_eeprom_calib_version(priv) >= 6)
+			iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG,
+					CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
+		break;
+	case IWL_DEVICE_FAMILY_6150:
+		/* Indicate calibration version to uCode. */
+		if (iwl_eeprom_calib_version(priv) >= 6)
+			iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG,
+					CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
+		iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG,
+			    CSR_GP_DRIVER_REG_BIT_6050_1x2);
+		break;
+	default:
+		WARN_ON(1);
+	}
+}
+
+static const struct iwl_sensitivity_ranges iwl6000_sensitivity = {
+	.min_nrg_cck = 110,
+	.auto_corr_min_ofdm = 80,
+	.auto_corr_min_ofdm_mrc = 128,
+	.auto_corr_min_ofdm_x1 = 105,
+	.auto_corr_min_ofdm_mrc_x1 = 192,
+
+	.auto_corr_max_ofdm = 145,
+	.auto_corr_max_ofdm_mrc = 232,
+	.auto_corr_max_ofdm_x1 = 110,
+	.auto_corr_max_ofdm_mrc_x1 = 232,
+
+	.auto_corr_min_cck = 125,
+	.auto_corr_max_cck = 175,
+	.auto_corr_min_cck_mrc = 160,
+	.auto_corr_max_cck_mrc = 310,
+	.nrg_th_cck = 110,
+	.nrg_th_ofdm = 110,
+
+	.barker_corr_th_min = 190,
+	.barker_corr_th_min_mrc = 336,
+	.nrg_th_cca = 62,
+};
+
+static void iwl6000_hw_set_hw_params(struct iwl_priv *priv)
+{
+	priv->hw_params.ht40_channel =  BIT(IEEE80211_BAND_2GHZ) |
+					BIT(IEEE80211_BAND_5GHZ);
+
+	priv->hw_params.tx_chains_num =
+		num_of_ant(priv->hw_params.valid_tx_ant);
+	if (priv->cfg->rx_with_siso_diversity)
+		priv->hw_params.rx_chains_num = 1;
+	else
+		priv->hw_params.rx_chains_num =
+			num_of_ant(priv->hw_params.valid_rx_ant);
+
+	iwl6000_set_ct_threshold(priv);
+
+	/* Set initial sensitivity parameters */
+	priv->hw_params.sens = &iwl6000_sensitivity;
+
+}
+
+static int iwl6000_hw_channel_switch(struct iwl_priv *priv,
+				     struct ieee80211_channel_switch *ch_switch)
+{
+	/*
+	 * MULTI-FIXME
+	 * See iwlagn_mac_channel_switch.
+	 */
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+	struct iwl6000_channel_switch_cmd cmd;
+	const struct iwl_channel_info *ch_info;
+	u32 switch_time_in_usec, ucode_switch_time;
+	u16 ch;
+	u32 tsf_low;
+	u8 switch_count;
+	u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
+	struct ieee80211_vif *vif = ctx->vif;
+	struct iwl_host_cmd hcmd = {
+		.id = REPLY_CHANNEL_SWITCH,
+		.len = { sizeof(cmd), },
+		.flags = CMD_SYNC,
+		.data = { &cmd, },
+	};
+
+	cmd.band = priv->band == IEEE80211_BAND_2GHZ;
+	ch = ch_switch->channel->hw_value;
+	IWL_DEBUG_11H(priv, "channel switch from %u to %u\n",
+		      ctx->active.channel, ch);
+	cmd.channel = cpu_to_le16(ch);
+	cmd.rxon_flags = ctx->staging.flags;
+	cmd.rxon_filter_flags = ctx->staging.filter_flags;
+	switch_count = ch_switch->count;
+	tsf_low = ch_switch->timestamp & 0x0ffffffff;
+	/*
+	 * calculate the ucode channel switch time
+	 * adding TSF as one of the factor for when to switch
+	 */
+	if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
+		if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
+		    beacon_interval)) {
+			switch_count -= (priv->ucode_beacon_time -
+				tsf_low) / beacon_interval;
+		} else
+			switch_count = 0;
+	}
+	if (switch_count <= 1)
+		cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
+	else {
+		switch_time_in_usec =
+			vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
+		ucode_switch_time = iwl_usecs_to_beacons(priv,
+							 switch_time_in_usec,
+							 beacon_interval);
+		cmd.switch_time = iwl_add_beacon_time(priv,
+						      priv->ucode_beacon_time,
+						      ucode_switch_time,
+						      beacon_interval);
+	}
+	IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
+		      cmd.switch_time);
+	ch_info = iwl_get_channel_info(priv, priv->band, ch);
+	if (ch_info)
+		cmd.expect_beacon = is_channel_radar(ch_info);
+	else {
+		IWL_ERR(priv, "invalid channel switch from %u to %u\n",
+			ctx->active.channel, ch);
+		return -EFAULT;
+	}
+
+	return iwl_dvm_send_cmd(priv, &hcmd);
+}
+
+struct iwl_lib_ops iwl6000_lib = {
+	.set_hw_params = iwl6000_hw_set_hw_params,
+	.set_channel_switch = iwl6000_hw_channel_switch,
+	.nic_config = iwl6000_nic_config,
+	.eeprom_ops = {
+		.regulatory_bands = {
+			EEPROM_REG_BAND_1_CHANNELS,
+			EEPROM_REG_BAND_2_CHANNELS,
+			EEPROM_REG_BAND_3_CHANNELS,
+			EEPROM_REG_BAND_4_CHANNELS,
+			EEPROM_REG_BAND_5_CHANNELS,
+			EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
+			EEPROM_REG_BAND_52_HT40_CHANNELS
+		},
+		.enhanced_txpower = true,
+	},
+	.temperature = iwlagn_temperature,
+};
+
+struct iwl_lib_ops iwl6030_lib = {
+	.set_hw_params = iwl6000_hw_set_hw_params,
+	.set_channel_switch = iwl6000_hw_channel_switch,
+	.nic_config = iwl6000_nic_config,
+	.eeprom_ops = {
+		.regulatory_bands = {
+			EEPROM_REG_BAND_1_CHANNELS,
+			EEPROM_REG_BAND_2_CHANNELS,
+			EEPROM_REG_BAND_3_CHANNELS,
+			EEPROM_REG_BAND_4_CHANNELS,
+			EEPROM_REG_BAND_5_CHANNELS,
+			EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
+			EEPROM_REG_BAND_52_HT40_CHANNELS
+		},
+		.enhanced_txpower = true,
+	},
+	.temperature = iwlagn_temperature,
+};