wifi: wilc1000: add WPA3 SAE support

Enable SAE authentication for AP and STA mode. In STA mode, allow the
driver to pass the auth frames which are received from firmware to
userspace application(hostapd) so that SAE authentication is offloaded to
userspace.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220524120606.9675-3-ajay.kathat@microchip.com

1 files changed, 41 insertions, 3 deletions

diff --git a/drivers/net/wireless/microchip/wilc1000/hif.c b/drivers/net/wireless/microchip/wilc1000/hif.c
index 573750356007..5d9d3aba737c 100644
--- a/drivers/net/wireless/microchip/wilc1000/hif.c
+++ b/drivers/net/wireless/microchip/wilc1000/hif.c
@@ -306,7 +306,10 @@ static int wilc_send_connect_wid(struct wilc_vif *vif)
 		netdev_err(vif->ndev, "failed to send config packet\n");
 		goto error;
 	} else {
-		hif_drv->hif_state = HOST_IF_WAITING_CONN_RESP;
+                if (conn_attr->auth_type == WILC_FW_AUTH_SAE)
+                        hif_drv->hif_state = HOST_IF_EXTERNAL_AUTH;
+                else
+                        hif_drv->hif_state = HOST_IF_WAITING_CONN_RESP;
 	}
 
 	return 0;
@@ -665,7 +668,12 @@ static void handle_rcvd_gnrl_async_info(struct work_struct *work)
 		goto free_msg;
 	}
 
-	if (hif_drv->hif_state == HOST_IF_WAITING_CONN_RESP) {
+
+        if (hif_drv->hif_state == HOST_IF_EXTERNAL_AUTH) {
+                cfg80211_external_auth_request(vif->ndev, &vif->auth,
+					       GFP_KERNEL);
+                hif_drv->hif_state = HOST_IF_WAITING_CONN_RESP;
+        } else if (hif_drv->hif_state == HOST_IF_WAITING_CONN_RESP) {
 		host_int_parse_assoc_resp_info(vif, mac_info->status);
 	} else if (mac_info->status == WILC_MAC_STATUS_DISCONNECTED) {
 		if (hif_drv->hif_state == HOST_IF_CONNECTED) {
@@ -710,7 +718,8 @@ int wilc_disconnect(struct wilc_vif *vif)
 	}
 
 	if (conn_info->conn_result) {
-		if (hif_drv->hif_state == HOST_IF_WAITING_CONN_RESP)
+		if (hif_drv->hif_state == HOST_IF_WAITING_CONN_RESP ||
+		    hif_drv->hif_state == HOST_IF_EXTERNAL_AUTH)
 			del_timer(&hif_drv->connect_timer);
 
 		conn_info->conn_result(CONN_DISCONN_EVENT_DISCONN_NOTIF, 0,
@@ -986,6 +995,31 @@ void wilc_set_wowlan_trigger(struct wilc_vif *vif, bool enabled)
 		pr_err("Failed to send wowlan trigger config packet\n");
 }
 
+int wilc_set_external_auth_param(struct wilc_vif *vif,
+				 struct cfg80211_external_auth_params *auth)
+{
+	int ret;
+	struct wid wid;
+	struct wilc_external_auth_param *param;
+
+	wid.id = WID_EXTERNAL_AUTH_PARAM;
+	wid.type = WID_BIN_DATA;
+	wid.size = sizeof(*param);
+	param = kzalloc(sizeof(*param), GFP_KERNEL);
+	if (!param)
+		return -EINVAL;
+
+	wid.val = (u8 *)param;
+	param->action = auth->action;
+	ether_addr_copy(param->bssid, auth->bssid);
+	memcpy(param->ssid, auth->ssid.ssid, auth->ssid.ssid_len);
+	param->ssid_len = auth->ssid.ssid_len;
+	ret = wilc_send_config_pkt(vif, WILC_SET_CFG, &wid, 1);
+
+	kfree(param);
+	return ret;
+}
+
 static void handle_scan_timer(struct work_struct *work)
 {
 	struct host_if_msg *msg = container_of(work, struct host_if_msg, work);
@@ -1647,6 +1681,10 @@ void wilc_frame_register(struct wilc_vif *vif, u16 frame_type, bool reg)
 		reg_frame.reg_id = WILC_FW_PROBE_REQ_IDX;
 		break;
 
+        case IEEE80211_STYPE_AUTH:
+                reg_frame.reg_id = WILC_FW_AUTH_REQ_IDX;
+                break;
+
 	default:
 		break;
 	}