diff options
| author | Russell King (Oracle) <rmk+kernel@armlinux.org.uk> | 2022-02-02 10:24:28 +0000 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2022-02-03 11:47:06 +0000 |
| commit | 1f8d99de1d1b4b3764203ae02db57041475dab84 (patch) | |
| tree | 346d60871ca6a396b14f72723e4d0ab4cbfa0b38 /drivers/net | |
| parent | 9865b881a5137a4309a5984a4d1b844005b0a363 (diff) | |
net: dsa: xrs700x: convert to phylink_generic_validate()
Populate the supported interfaces and MAC capabilities for the xrs700x
family of DSA switches and remove the old validate implementation to
allow DSA to use phylink_generic_validate() for this switch driver.
According to commit ee00b24f32eb ("net: dsa: add Arrow SpeedChips
XRS700x driver") the switch supports one RMII port and up to three
RGMII ports. This commit assumes that port 0 is the RMII port and the
remainder are RGMII.
This commit also results in the Autoneg bit being set in the ethtool
link modes, which wasn't in the original; if this switch supports
RGMII to a 10/100/1G PHY, then surely we want to allow Autoneg on the
PHY.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/dsa/xrs700x/xrs700x.c | 29 |
1 files changed, 11 insertions, 18 deletions
diff --git a/drivers/net/dsa/xrs700x/xrs700x.c b/drivers/net/dsa/xrs700x/xrs700x.c index 0730352cdd57..bc06fe6bac6b 100644 --- a/drivers/net/dsa/xrs700x/xrs700x.c +++ b/drivers/net/dsa/xrs700x/xrs700x.c @@ -442,34 +442,27 @@ static void xrs700x_teardown(struct dsa_switch *ds) cancel_delayed_work_sync(&priv->mib_work); } -static void xrs700x_phylink_validate(struct dsa_switch *ds, int port, - unsigned long *supported, - struct phylink_link_state *state) +static void xrs700x_phylink_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) { - __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; - switch (port) { case 0: + __set_bit(PHY_INTERFACE_MODE_RMII, + config->supported_interfaces); + config->mac_capabilities = MAC_10FD | MAC_100FD; break; + case 1: case 2: case 3: - phylink_set(mask, 1000baseT_Full); + phy_interface_set_rgmii(config->supported_interfaces); + config->mac_capabilities = MAC_10FD | MAC_100FD | MAC_1000FD; break; + default: - linkmode_zero(supported); dev_err(ds->dev, "Unsupported port: %i\n", port); - return; + break; } - - phylink_set_port_modes(mask); - - /* The switch only supports full duplex. */ - phylink_set(mask, 10baseT_Full); - phylink_set(mask, 100baseT_Full); - - linkmode_and(supported, supported, mask); - linkmode_and(state->advertising, state->advertising, mask); } static void xrs700x_mac_link_up(struct dsa_switch *ds, int port, @@ -703,7 +696,7 @@ static const struct dsa_switch_ops xrs700x_ops = { .setup = xrs700x_setup, .teardown = xrs700x_teardown, .port_stp_state_set = xrs700x_port_stp_state_set, - .phylink_validate = xrs700x_phylink_validate, + .phylink_get_caps = xrs700x_phylink_get_caps, .phylink_mac_link_up = xrs700x_mac_link_up, .get_strings = xrs700x_get_strings, .get_sset_count = xrs700x_get_sset_count, |