diff options
| author | Krishna Gudipati <kgudipat@brocade.com> | 2011-12-20 18:58:32 -0800 |
|---|---|---|
| committer | James Bottomley <JBottomley@Parallels.com> | 2012-01-10 17:01:24 -0600 |
| commit | 5b7db7af522d9f281ff8bf540d2b5cbea2206b27 (patch) | |
| tree | 7e2b2750a13a5ee9794d1893a0b575419cde95cf /drivers/scsi/bfa/bfad_im.h | |
| parent | 8ca2dd87e7f29df99389e9dc41f7a45a35223672 (diff) | |
[SCSI] bfa: Implement LUN Masking feature using the SCSI Slave Callouts.
This patch re-implements LUN Masking feature using SCSI Slave Callouts. With
the new design in the slave_alloc entry point; for each new LUN discovered we
check with our internal LUN Masking config whether to expose or to mask this
particular LUN. We return -ENXIO (No such device or address) from slave_alloc
for the LUNs we don't want to be exposed. We also notify the SCSI mid-layer
to do a sequential LUN scan rather than REPORT_LUNS based scan if LUN masking
is enabled on our HBA port, since a -ENXIO from any LUN in REPORT_LUNS based
scan translates to a scan abort. This patch also handles the dynamic lun
masking config change from enable to disable or vice-versa by resetting
sdev_bflags of LUN 0 appropriately.
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Diffstat (limited to 'drivers/scsi/bfa/bfad_im.h')
| -rw-r--r-- | drivers/scsi/bfa/bfad_im.h | 27 |
1 files changed, 27 insertions, 0 deletions
diff --git a/drivers/scsi/bfa/bfad_im.h b/drivers/scsi/bfa/bfad_im.h index 004b6cf848d9..0814367ef101 100644 --- a/drivers/scsi/bfa/bfad_im.h +++ b/drivers/scsi/bfa/bfad_im.h @@ -91,6 +91,7 @@ struct bfad_itnim_s { struct fc_rport *fc_rport; struct bfa_itnim_s *bfa_itnim; u16 scsi_tgt_id; + u16 channel; u16 queue_work; unsigned long last_ramp_up_time; unsigned long last_queue_full_time; @@ -166,4 +167,30 @@ irqreturn_t bfad_intx(int irq, void *dev_id); int bfad_im_bsg_request(struct fc_bsg_job *job); int bfad_im_bsg_timeout(struct fc_bsg_job *job); +/* + * Macro to set the SCSI device sdev_bflags - sdev_bflags are used by the + * SCSI mid-layer to choose LUN Scanning mode REPORT_LUNS vs. Sequential Scan + * + * Internally iterate's over all the ITNIM's part of the im_port & set's the + * sdev_bflags for the scsi_device associated with LUN #0. + */ +#define bfad_reset_sdev_bflags(__im_port, __lunmask_cfg) do { \ + struct scsi_device *__sdev = NULL; \ + struct bfad_itnim_s *__itnim = NULL; \ + u32 scan_flags = BLIST_NOREPORTLUN | BLIST_SPARSELUN; \ + list_for_each_entry(__itnim, &((__im_port)->itnim_mapped_list), \ + list_entry) { \ + __sdev = scsi_device_lookup((__im_port)->shost, \ + __itnim->channel, \ + __itnim->scsi_tgt_id, 0); \ + if (__sdev) { \ + if ((__lunmask_cfg) == BFA_TRUE) \ + __sdev->sdev_bflags |= scan_flags; \ + else \ + __sdev->sdev_bflags &= ~scan_flags; \ + scsi_device_put(__sdev); \ + } \ + } \ +} while (0) + #endif |