Merge tag 'arm-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Most of the changes this time are for the Qualcomm Snapdragon
  platforms.

  There are bug fixes for error handling in Qualcomm icc-bwmon,
  rpmh-rsc, ramp_controller and rmtfs driver as well as the AMD tee
  firmware driver and a missing initialization in the Arm ff-a firmware
  driver. The Qualcomm RPMh and EDAC drivers need some rework to work
  correctly on all supported chips.

  The DT fixes include:

   - i.MX8 fixes for gpio, pinmux and clock settings

   - ADS touchscreen gpio polarity settings in several machines

   - Address dtb warnings for caches, panel and input-enable properties
     on Qualcomm platforms

   - Incorrect data on qualcomm platforms fir SA8155P power domains,
     SM8550 LLCC, SC7180-lite SDRAM frequencies and SM8550 soundwire

   - Remoteproc firmware paths are corrected for Sony Xperia 10 IV"

* tag 'arm-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
  firmware: arm_ffa: Set handle field to zero in memory descriptor
  ARM: dts: Fix erroneous ADS touchscreen polarities
  arm64: dts: imx8mn-beacon: Fix SPI CS pinmux
  arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts
  arm64: dts: imx8qm-mek: correct GPIOs for USDHC2 CD and WP signals
  EDAC/qcom: Get rid of hardcoded register offsets
  EDAC/qcom: Remove superfluous return variable assignment in qcom_llcc_core_setup()
  arm64: dts: qcom: sm8550: Use the correct LLCC register scheme
  dt-bindings: cache: qcom,llcc: Fix SM8550 description
  arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards
  arm64: dts: qcom: sm8550: use uint16 for Soundwire interval
  soc: qcom: rpmhpd: Add SA8155P power domains
  arm64: dts: qcom: Split out SA8155P and use correct RPMh power domains
  dt-bindings: power: qcom,rpmpd: Add SA8155P
  soc: qcom: Rename ice to qcom_ice to avoid module name conflict
  soc: qcom: rmtfs: Fix error code in probe()
  soc: qcom: ramp_controller: Fix an error handling path in qcom_ramp_controller_probe()
  ARM: dts: at91: sama7g5ek: fix debounce delay property for shdwc
  ARM: at91: pm: fix imbalanced reference counter for ethernet devices
  arm64: dts: qcom: sm6375-pdx225: Fix remoteproc firmware paths
  ...

6 files changed, 23 insertions, 5 deletions

diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 0f43a88b4894..89b775512bef 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -32,4 +32,5 @@ obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o
 obj-$(CONFIG_QCOM_RPMPD) += rpmpd.o
 obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) +=	kryo-l2-accessors.o
 obj-$(CONFIG_QCOM_ICC_BWMON)	+= icc-bwmon.o
-obj-$(CONFIG_QCOM_INLINE_CRYPTO_ENGINE)	+= ice.o
+qcom_ice-objs			+= ice.o
+obj-$(CONFIG_QCOM_INLINE_CRYPTO_ENGINE)	+= qcom_ice.o
diff --git a/drivers/soc/qcom/icc-bwmon.c b/drivers/soc/qcom/icc-bwmon.c
index fd58c5b69897..f65bfeca7ed6 100644
--- a/drivers/soc/qcom/icc-bwmon.c
+++ b/drivers/soc/qcom/icc-bwmon.c
@@ -773,12 +773,12 @@ static int bwmon_probe(struct platform_device *pdev)
 	bwmon->max_bw_kbps = UINT_MAX;
 	opp = dev_pm_opp_find_bw_floor(dev, &bwmon->max_bw_kbps, 0);
 	if (IS_ERR(opp))
-		return dev_err_probe(dev, ret, "failed to find max peak bandwidth\n");
+		return dev_err_probe(dev, PTR_ERR(opp), "failed to find max peak bandwidth\n");
 
 	bwmon->min_bw_kbps = 0;
 	opp = dev_pm_opp_find_bw_ceil(dev, &bwmon->min_bw_kbps, 0);
 	if (IS_ERR(opp))
-		return dev_err_probe(dev, ret, "failed to find min peak bandwidth\n");
+		return dev_err_probe(dev, PTR_ERR(opp), "failed to find min peak bandwidth\n");
 
 	bwmon->dev = dev;
 
diff --git a/drivers/soc/qcom/ramp_controller.c b/drivers/soc/qcom/ramp_controller.c
index dc74d2a19de2..5e3ba0be0903 100644
--- a/drivers/soc/qcom/ramp_controller.c
+++ b/drivers/soc/qcom/ramp_controller.c
@@ -296,7 +296,7 @@ static int qcom_ramp_controller_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	qrc->desc = device_get_match_data(&pdev->dev);
-	if (!qrc)
+	if (!qrc->desc)
 		return -EINVAL;
 
 	qrc->regmap = devm_regmap_init_mmio(&pdev->dev, base, &qrc_regmap_config);
diff --git a/drivers/soc/qcom/rmtfs_mem.c b/drivers/soc/qcom/rmtfs_mem.c
index ce48a9f3b4c8..f83811f51175 100644
--- a/drivers/soc/qcom/rmtfs_mem.c
+++ b/drivers/soc/qcom/rmtfs_mem.c
@@ -233,6 +233,7 @@ static int qcom_rmtfs_mem_probe(struct platform_device *pdev)
 		num_vmids = 0;
 	} else if (num_vmids < 0) {
 		dev_err(&pdev->dev, "failed to count qcom,vmid elements: %d\n", num_vmids);
+		ret = num_vmids;
 		goto remove_cdev;
 	} else if (num_vmids > NUM_MAX_VMIDS) {
 		dev_warn(&pdev->dev,
diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
index f93544f6d796..0dd4363ebac8 100644
--- a/drivers/soc/qcom/rpmh-rsc.c
+++ b/drivers/soc/qcom/rpmh-rsc.c
@@ -1073,7 +1073,7 @@ static int rpmh_rsc_probe(struct platform_device *pdev)
 	drv->ver.minor = rsc_id & (MINOR_VER_MASK << MINOR_VER_SHIFT);
 	drv->ver.minor >>= MINOR_VER_SHIFT;
 
-	if (drv->ver.major == 3 && drv->ver.minor >= 0)
+	if (drv->ver.major == 3)
 		drv->regs = rpmh_rsc_reg_offset_ver_3_0;
 	else
 		drv->regs = rpmh_rsc_reg_offset_ver_2_7;
diff --git a/drivers/soc/qcom/rpmhpd.c b/drivers/soc/qcom/rpmhpd.c
index f20e2a49a669..63c35a32065b 100644
--- a/drivers/soc/qcom/rpmhpd.c
+++ b/drivers/soc/qcom/rpmhpd.c
@@ -342,6 +342,21 @@ static const struct rpmhpd_desc sm8150_desc = {
 	.num_pds = ARRAY_SIZE(sm8150_rpmhpds),
 };
 
+static struct rpmhpd *sa8155p_rpmhpds[] = {
+	[SA8155P_CX] = &cx_w_mx_parent,
+	[SA8155P_CX_AO] = &cx_ao_w_mx_parent,
+	[SA8155P_EBI] = &ebi,
+	[SA8155P_GFX] = &gfx,
+	[SA8155P_MSS] = &mss,
+	[SA8155P_MX] = &mx,
+	[SA8155P_MX_AO] = &mx_ao,
+};
+
+static const struct rpmhpd_desc sa8155p_desc = {
+	.rpmhpds = sa8155p_rpmhpds,
+	.num_pds = ARRAY_SIZE(sa8155p_rpmhpds),
+};
+
 /* SM8250 RPMH powerdomains */
 static struct rpmhpd *sm8250_rpmhpds[] = {
 	[SM8250_CX] = &cx_w_mx_parent,
@@ -519,6 +534,7 @@ static const struct rpmhpd_desc sc8280xp_desc = {
 
 static const struct of_device_id rpmhpd_match_table[] = {
 	{ .compatible = "qcom,qdu1000-rpmhpd", .data = &qdu1000_desc },
+	{ .compatible = "qcom,sa8155p-rpmhpd", .data = &sa8155p_desc },
 	{ .compatible = "qcom,sa8540p-rpmhpd", .data = &sa8540p_desc },
 	{ .compatible = "qcom,sa8775p-rpmhpd", .data = &sa8775p_desc },
 	{ .compatible = "qcom,sc7180-rpmhpd", .data = &sc7180_desc },