Merge 5.18-rc5 into usb-next

We need the USB fixes in here, and this resolves a merge issue in
drivers/usb/dwc3/drd.c

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 files changed, 71 insertions, 11 deletions

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 364c64559ca4..2345a54b848b 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -275,7 +275,8 @@ int dwc3_core_soft_reset(struct dwc3 *dwc)
 
 	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 	reg |= DWC3_DCTL_CSFTRST;
-	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+	reg &= ~DWC3_DCTL_RUN_STOP;
+	dwc3_gadget_dctl_write_safe(dwc, reg);
 
 	/*
 	 * For DWC_usb31 controller 1.90a and later, the DCTL.CSFRST bit
@@ -1377,10 +1378,10 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 	u8			lpm_nyet_threshold;
 	u8			tx_de_emphasis;
 	u8			hird_threshold;
-	u8			rx_thr_num_pkt_prd;
-	u8			rx_max_burst_prd;
-	u8			tx_thr_num_pkt_prd;
-	u8			tx_max_burst_prd;
+	u8			rx_thr_num_pkt_prd = 0;
+	u8			rx_max_burst_prd = 0;
+	u8			tx_thr_num_pkt_prd = 0;
+	u8			tx_max_burst_prd = 0;
 	u8			tx_fifo_resize_max_num;
 	const char		*usb_psy_name;
 	int			ret;
@@ -1735,21 +1736,44 @@ static int dwc3_probe(struct platform_device *pdev)
 		/*
 		 * Clocks are optional, but new DT platforms should support all
 		 * clocks as required by the DT-binding.
+		 * Some devices have different clock names in legacy device trees,
+		 * check for them to retain backwards compatibility.
 		 */
 		dwc->bus_clk = devm_clk_get_optional(dev, "bus_early");
 		if (IS_ERR(dwc->bus_clk))
 			return dev_err_probe(dev, PTR_ERR(dwc->bus_clk),
 					     "could not get bus clock\n");
 
+		if (dwc->bus_clk == NULL) {
+			dwc->bus_clk = devm_clk_get_optional(dev, "bus_clk");
+			if (IS_ERR(dwc->bus_clk))
+				return dev_err_probe(dev, PTR_ERR(dwc->bus_clk),
+						     "could not get bus clock\n");
+		}
+
 		dwc->ref_clk = devm_clk_get_optional(dev, "ref");
 		if (IS_ERR(dwc->ref_clk))
 			return dev_err_probe(dev, PTR_ERR(dwc->ref_clk),
 					     "could not get ref clock\n");
 
+		if (dwc->ref_clk == NULL) {
+			dwc->ref_clk = devm_clk_get_optional(dev, "ref_clk");
+			if (IS_ERR(dwc->ref_clk))
+				return dev_err_probe(dev, PTR_ERR(dwc->ref_clk),
+						     "could not get ref clock\n");
+		}
+
 		dwc->susp_clk = devm_clk_get_optional(dev, "suspend");
 		if (IS_ERR(dwc->susp_clk))
 			return dev_err_probe(dev, PTR_ERR(dwc->susp_clk),
 					     "could not get suspend clock\n");
+
+		if (dwc->susp_clk == NULL) {
+			dwc->susp_clk = devm_clk_get_optional(dev, "suspend_clk");
+			if (IS_ERR(dwc->susp_clk))
+				return dev_err_probe(dev, PTR_ERR(dwc->susp_clk),
+						     "could not get suspend clock\n");
+		}
 	}
 
 	ret = reset_control_deassert(dwc->reset);
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index f277bebdaa09..039bf241769a 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -539,11 +539,10 @@ int dwc3_drd_init(struct dwc3 *dwc)
 	int ret, irq;
 
 	if (ROLE_SWITCH &&
-	    device_property_read_bool(dwc->dev, "usb-role-switch")) {
-		ret = dwc3_setup_role_switch(dwc);
-		if (ret < 0)
-			return ret;
-	} else if (dwc->edev) {
+	    device_property_read_bool(dwc->dev, "usb-role-switch"))
+		return dwc3_setup_role_switch(dwc);
+
+	if (dwc->edev) {
 		dwc->edev_nb.notifier_call = dwc3_drd_notifier;
 		ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
 					       &dwc->edev_nb);
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 491b5b05d196..ba51de7dd760 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -45,6 +45,8 @@
 #define PCI_DEVICE_ID_INTEL_ADLM		0x54ee
 #define PCI_DEVICE_ID_INTEL_ADLS		0x7ae1
 #define PCI_DEVICE_ID_INTEL_RPLS		0x7a61
+#define PCI_DEVICE_ID_INTEL_MTLP		0x7ec1
+#define PCI_DEVICE_ID_INTEL_MTL			0x7e7e
 #define PCI_DEVICE_ID_INTEL_TGL			0x9a15
 #define PCI_DEVICE_ID_AMD_MR			0x163a
 
@@ -456,6 +458,12 @@ static const struct pci_device_id dwc3_pci_id_table[] = {
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_RPLS),
 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
 
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MTLP),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MTL),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGL),
 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
 
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 19477f4bbf54..5b1d79528da3 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -3283,6 +3283,7 @@ static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep,
 		const struct dwc3_event_depevt *event,
 		struct dwc3_request *req, int status)
 {
+	int request_status;
 	int ret;
 
 	if (req->request.num_mapped_sgs)
@@ -3303,7 +3304,35 @@ static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep,
 		req->needs_extra_trb = false;
 	}
 
-	dwc3_gadget_giveback(dep, req, status);
+	/*
+	 * The event status only reflects the status of the TRB with IOC set.
+	 * For the requests that don't set interrupt on completion, the driver
+	 * needs to check and return the status of the completed TRBs associated
+	 * with the request. Use the status of the last TRB of the request.
+	 */
+	if (req->request.no_interrupt) {
+		struct dwc3_trb *trb;
+
+		trb = dwc3_ep_prev_trb(dep, dep->trb_dequeue);
+		switch (DWC3_TRB_SIZE_TRBSTS(trb->size)) {
+		case DWC3_TRBSTS_MISSED_ISOC:
+			/* Isoc endpoint only */
+			request_status = -EXDEV;
+			break;
+		case DWC3_TRB_STS_XFER_IN_PROG:
+			/* Applicable when End Transfer with ForceRM=0 */
+		case DWC3_TRBSTS_SETUP_PENDING:
+			/* Control endpoint only */
+		case DWC3_TRBSTS_OK:
+		default:
+			request_status = 0;
+			break;
+		}
+	} else {
+		request_status = status;
+	}
+
+	dwc3_gadget_giveback(dep, req, request_status);
 
 out:
 	return ret;