Merge tag 'usb-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: changes for v3.14 merge window

This pull request is quite extensive, containing
105 non-merge commits. Because of that, we describe
the changes in sections below:

New drivers:
	- Keystone PHY driver and DWC3 Glue Layer
	- Aeroflex Gaisler GRUSBDC
	- Tahvo PHY driver for N770
	- JZ4740 MUSB gluer Layer
	- Broadcom PHY Driver

Important new features:
	- MUSB DSPS learned about suspend/resume
	- New quirk_ep_out_aligned_size flag added to struct usb_gadget
	- DWC3 initializes the new quirk flag so gadget drivers can use it.
	- AM335x PHY Driver learns about remote wakeup
	- Renesas USBHS now requests DMA Engine only once
	- s3c-hsotg is now re-used on Broadcom devices
	- USB PHY layer now makes sure to initialize the notifier for all
		drivers
	- omap-control learned about TI's new AM437x devices
	- few other usb gadget/function drivers learned about the new
		configfs-based binding.

Misc Fixes and Clean Ups:
	- Several sparse fixes all over the place
	- Removal of redundant of_match_ptr()
	- r-car gen2 phy now uses usb_add_phy_dev()
	- removal of DEFINE_PCI_DEVICE_TABLE() from a few drivers
	- conversion to clk_prepare/clk_unprepare on r8a66597-udc
	- some randconfig errors and build warnings were fixed
	- removal of unnecessary lock on dwc3-omap.c

Signed-of-by: Felipe Balbi <balbi@ti.com>

1 files changed, 9 insertions, 4 deletions

diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index 545844b7e796..b42897b6474c 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -63,9 +63,13 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 
 static int mxs_phy_init(struct usb_phy *phy)
 {
+	int ret;
 	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
 
-	clk_prepare_enable(mxs_phy->clk);
+	ret = clk_prepare_enable(mxs_phy->clk);
+	if (ret)
+		return ret;
+
 	return mxs_phy_hw_init(mxs_phy);
 }
 
@@ -81,6 +85,7 @@ static void mxs_phy_shutdown(struct usb_phy *phy)
 
 static int mxs_phy_suspend(struct usb_phy *x, int suspend)
 {
+	int ret;
 	struct mxs_phy *mxs_phy = to_mxs_phy(x);
 
 	if (suspend) {
@@ -89,7 +94,9 @@ static int mxs_phy_suspend(struct usb_phy *x, int suspend)
 		       x->io_priv + HW_USBPHY_CTRL_SET);
 		clk_disable_unprepare(mxs_phy->clk);
 	} else {
-		clk_prepare_enable(mxs_phy->clk);
+		ret = clk_prepare_enable(mxs_phy->clk);
+		if (ret)
+			return ret;
 		writel(BM_USBPHY_CTRL_CLKGATE,
 		       x->io_priv + HW_USBPHY_CTRL_CLR);
 		writel(0, x->io_priv + HW_USBPHY_PWD);
@@ -160,8 +167,6 @@ static int mxs_phy_probe(struct platform_device *pdev)
 	mxs_phy->phy.notify_disconnect	= mxs_phy_on_disconnect;
 	mxs_phy->phy.type		= USB_PHY_TYPE_USB2;
 
-	ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier);
-
 	mxs_phy->clk = clk;
 
 	platform_set_drvdata(pdev, mxs_phy);