Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6

Pull misc SPI device driver bug fixes from Grant Likely.

* tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  spi/spi-bfin5xx: Fix flush of last bit after each spi transfer
  spi/spi-bfin5xx: fix reversed if condition in interrupt mode
  spi/spi_bfin_sport: drop bits_per_word from client data
  spi/bfin_spi: drop bits_per_word from client data
  spi/spi-bfin-sport: move word length setup to transfer handler
  spi/bfin5xx: rename config macro name for bfin5xx spi controller driver
  spi/pl022: Allow request for higher frequency than maximum possible
  spi/bcm63xx: set master driver mode_bits.
  spi/bcm63xx: don't use the stopping state
  spi/bcm63xx: convert to the pump message infrastructure
  spi/spi-ep93xx.c: use dma_transfer_direction instead of dma_data_direction
  spi: fix spi.h kernel-doc warning
  spi/pl022: Fix calculate_effective_freq()
  spi/pl022: Fix range checking for bits per word

7 files changed, 157 insertions, 127 deletions

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 3ed748355b98..00c024039c97 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -74,7 +74,7 @@ config SPI_ATMEL
 	  This selects a driver for the Atmel SPI Controller, present on
 	  many AT32 (AVR32) and AT91 (ARM) chips.
 
-config SPI_BFIN
+config SPI_BFIN5XX
 	tristate "SPI controller driver for ADI Blackfin5xx"
 	depends on BLACKFIN
 	help
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index a1d48e0ba3dc..9d75d2198ff5 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -15,7 +15,7 @@ obj-$(CONFIG_SPI_ATMEL)			+= spi-atmel.o
 obj-$(CONFIG_SPI_ATH79)			+= spi-ath79.o
 obj-$(CONFIG_SPI_AU1550)		+= spi-au1550.o
 obj-$(CONFIG_SPI_BCM63XX)		+= spi-bcm63xx.o
-obj-$(CONFIG_SPI_BFIN)			+= spi-bfin5xx.o
+obj-$(CONFIG_SPI_BFIN5XX)		+= spi-bfin5xx.o
 obj-$(CONFIG_SPI_BFIN_SPORT)		+= spi-bfin-sport.o
 obj-$(CONFIG_SPI_BITBANG)		+= spi-bitbang.o
 obj-$(CONFIG_SPI_BUTTERFLY)		+= spi-butterfly.o
diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index f01b2648452e..7491971139a6 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -1,7 +1,7 @@
 /*
  * Broadcom BCM63xx SPI controller support
  *
- * Copyright (C) 2009-2011 Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2009-2012 Florian Fainelli <florian@openwrt.org>
  * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
  *
  * This program is free software; you can redistribute it and/or
@@ -30,6 +30,8 @@
 #include <linux/spi/spi.h>
 #include <linux/completion.h>
 #include <linux/err.h>
+#include <linux/workqueue.h>
+#include <linux/pm_runtime.h>
 
 #include <bcm63xx_dev_spi.h>
 
@@ -37,8 +39,6 @@
 #define DRV_VER		"0.1.2"
 
 struct bcm63xx_spi {
-	spinlock_t		lock;
-	int			stopping;
 	struct completion	done;
 
 	void __iomem		*regs;
@@ -96,17 +96,12 @@ static const unsigned bcm63xx_spi_freq_table[SPI_CLK_MASK][2] = {
 	{   391000, SPI_CLK_0_391MHZ }
 };
 
-static int bcm63xx_spi_setup_transfer(struct spi_device *spi,
-				      struct spi_transfer *t)
+static int bcm63xx_spi_check_transfer(struct spi_device *spi,
+					struct spi_transfer *t)
 {
-	struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
 	u8 bits_per_word;
-	u8 clk_cfg, reg;
-	u32 hz;
-	int i;
 
 	bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
-	hz = (t) ? t->speed_hz : spi->max_speed_hz;
 	if (bits_per_word != 8) {
 		dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
 			__func__, bits_per_word);
@@ -119,6 +114,19 @@ static int bcm63xx_spi_setup_transfer(struct spi_device *spi,
 		return -EINVAL;
 	}
 
+	return 0;
+}
+
+static void bcm63xx_spi_setup_transfer(struct spi_device *spi,
+				      struct spi_transfer *t)
+{
+	struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
+	u32 hz;
+	u8 clk_cfg, reg;
+	int i;
+
+	hz = (t) ? t->speed_hz : spi->max_speed_hz;
+
 	/* Find the closest clock configuration */
 	for (i = 0; i < SPI_CLK_MASK; i++) {
 		if (hz <= bcm63xx_spi_freq_table[i][0]) {
@@ -139,8 +147,6 @@ static int bcm63xx_spi_setup_transfer(struct spi_device *spi,
 	bcm_spi_writeb(bs, reg, SPI_CLK_CFG);
 	dev_dbg(&spi->dev, "Setting clock register to %02x (hz %d)\n",
 		clk_cfg, hz);
-
-	return 0;
 }
 
 /* the spi->mode bits understood by this driver: */
@@ -153,9 +159,6 @@ static int bcm63xx_spi_setup(struct spi_device *spi)
 
 	bs = spi_master_get_devdata(spi->master);
 
-	if (bs->stopping)
-		return -ESHUTDOWN;
-
 	if (!spi->bits_per_word)
 		spi->bits_per_word = 8;
 
@@ -165,7 +168,7 @@ static int bcm63xx_spi_setup(struct spi_device *spi)
 		return -EINVAL;
 	}
 
-	ret = bcm63xx_spi_setup_transfer(spi, NULL);
+	ret = bcm63xx_spi_check_transfer(spi, NULL);
 	if (ret < 0) {
 		dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
 			spi->mode & ~MODEBITS);
@@ -190,28 +193,29 @@ static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs)
 	bs->remaining_bytes -= size;
 }
 
-static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
+static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi,
+					struct spi_transfer *t)
 {
 	struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
 	u16 msg_ctl;
 	u16 cmd;
 
+	/* Disable the CMD_DONE interrupt */
+	bcm_spi_writeb(bs, 0, SPI_INT_MASK);
+
 	dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
 		t->tx_buf, t->rx_buf, t->len);
 
 	/* Transmitter is inhibited */
 	bs->tx_ptr = t->tx_buf;
 	bs->rx_ptr = t->rx_buf;
-	init_completion(&bs->done);
 
 	if (t->tx_buf) {
 		bs->remaining_bytes = t->len;
 		bcm63xx_spi_fill_tx_fifo(bs);
 	}
 
-	/* Enable the command done interrupt which
-	 * we use to determine completion of a command */
-	bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
+	init_completion(&bs->done);
 
 	/* Fill in the Message control register */
 	msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT);
@@ -230,33 +234,76 @@ static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
 	cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
 	cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT);
 	bcm_spi_writew(bs, cmd, SPI_CMD);
-	wait_for_completion(&bs->done);
 
-	/* Disable the CMD_DONE interrupt */
-	bcm_spi_writeb(bs, 0, SPI_INT_MASK);
+	/* Enable the CMD_DONE interrupt */
+	bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
 
 	return t->len - bs->remaining_bytes;
 }
 
-static int bcm63xx_transfer(struct spi_device *spi, struct spi_message *m)
+static int bcm63xx_spi_prepare_transfer(struct spi_master *master)
 {
-	struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
-	struct spi_transfer *t;
-	int ret = 0;
+	struct bcm63xx_spi *bs = spi_master_get_devdata(master);
 
-	if (unlikely(list_empty(&m->transfers)))
-		return -EINVAL;
+	pm_runtime_get_sync(&bs->pdev->dev);
 
-	if (bs->stopping)
-		return -ESHUTDOWN;
+	return 0;
+}
+
+static int bcm63xx_spi_unprepare_transfer(struct spi_master *master)
+{
+	struct bcm63xx_spi *bs = spi_master_get_devdata(master);
+
+	pm_runtime_put(&bs->pdev->dev);
+
+	return 0;
+}
+
+static int bcm63xx_spi_transfer_one(struct spi_master *master,
+					struct spi_message *m)
+{
+	struct bcm63xx_spi *bs = spi_master_get_devdata(master);
+	struct spi_transfer *t;
+	struct spi_device *spi = m->spi;
+	int status = 0;
+	unsigned int timeout = 0;
 
 	list_for_each_entry(t, &m->transfers, transfer_list) {
-		ret += bcm63xx_txrx_bufs(spi, t);
-	}
+		unsigned int len = t->len;
+		u8 rx_tail;
 
-	m->complete(m->context);
+		status = bcm63xx_spi_check_transfer(spi, t);
+		if (status < 0)
+			goto exit;
 
-	return ret;
+		/* configure adapter for a new transfer */
+		bcm63xx_spi_setup_transfer(spi, t);
+
+		while (len) {
+			/* send the data */
+			len -= bcm63xx_txrx_bufs(spi, t);
+
+			timeout = wait_for_completion_timeout(&bs->done, HZ);
+			if (!timeout) {
+				status = -ETIMEDOUT;
+				goto exit;
+			}
+
+			/* read out all data */
+			rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
+
+			/* Read out all the data */
+			if (rx_tail)
+				memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail);
+		}
+
+		m->actual_length += t->len;
+	}
+exit:
+	m->status = status;
+	spi_finalize_current_message(master);
+
+	return 0;
 }
 
 /* This driver supports single master mode only. Hence
@@ -267,39 +314,15 @@ static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id)
 	struct spi_master *master = (struct spi_master *)dev_id;
 	struct bcm63xx_spi *bs = spi_master_get_devdata(master);
 	u8 intr;
-	u16 cmd;
 
 	/* Read interupts and clear them immediately */
 	intr = bcm_spi_readb(bs, SPI_INT_STATUS);
 	bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
 	bcm_spi_writeb(bs, 0, SPI_INT_MASK);
 
-	/* A tansfer completed */
-	if (intr & SPI_INTR_CMD_DONE) {
-		u8 rx_tail;
-
-		rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
-
-		/* Read out all the data */
-		if (rx_tail)
-			memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail);
-
-		/* See if there is more data to send */
-		if (bs->remaining_bytes > 0) {
-			bcm63xx_spi_fill_tx_fifo(bs);
-
-			/* Start the transfer */
-			bcm_spi_writew(bs, SPI_HD_W << SPI_MSG_TYPE_SHIFT,
-				       SPI_MSG_CTL);
-			cmd = bcm_spi_readw(bs, SPI_CMD);
-			cmd |= SPI_CMD_START_IMMEDIATE;
-			cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
-			bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
-			bcm_spi_writew(bs, cmd, SPI_CMD);
-		} else {
-			complete(&bs->done);
-		}
-	}
+	/* A transfer completed */
+	if (intr & SPI_INTR_CMD_DONE)
+		complete(&bs->done);
 
 	return IRQ_HANDLED;
 }
@@ -345,7 +368,6 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev)
 	}
 
 	bs = spi_master_get_devdata(master);
-	init_completion(&bs->done);
 
 	platform_set_drvdata(pdev, master);
 	bs->pdev = pdev;
@@ -379,12 +401,13 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev)
 	master->bus_num = pdata->bus_num;
 	master->num_chipselect = pdata->num_chipselect;
 	master->setup = bcm63xx_spi_setup;
-	master->transfer = bcm63xx_transfer;
+	master->prepare_transfer_hardware = bcm63xx_spi_prepare_transfer;
+	master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer;
+	master->transfer_one_message = bcm63xx_spi_transfer_one;
+	master->mode_bits = MODEBITS;
 	bs->speed_hz = pdata->speed_hz;
-	bs->stopping = 0;
 	bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
 	bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA));
-	spin_lock_init(&bs->lock);
 
 	/* Initialize hardware */
 	clk_enable(bs->clk);
@@ -418,18 +441,16 @@ static int __devexit bcm63xx_spi_remove(struct platform_device *pdev)
 	struct spi_master *master = platform_get_drvdata(pdev);
 	struct bcm63xx_spi *bs = spi_master_get_devdata(master);
 
+	spi_unregister_master(master);
+
 	/* reset spi block */
 	bcm_spi_writeb(bs, 0, SPI_INT_MASK);
-	spin_lock(&bs->lock);
-	bs->stopping = 1;
 
 	/* HW shutdown */
 	clk_disable(bs->clk);
 	clk_put(bs->clk);
 
-	spin_unlock(&bs->lock);
 	platform_set_drvdata(pdev, 0);
-	spi_unregister_master(master);
 
 	return 0;
 }
diff --git a/drivers/spi/spi-bfin-sport.c b/drivers/spi/spi-bfin-sport.c
index 248a2cc671a9..1fe51198a622 100644
--- a/drivers/spi/spi-bfin-sport.c
+++ b/drivers/spi/spi-bfin-sport.c
@@ -252,19 +252,15 @@ static void
 bfin_sport_spi_restore_state(struct bfin_sport_spi_master_data *drv_data)
 {
 	struct bfin_sport_spi_slave_data *chip = drv_data->cur_chip;
-	unsigned int bits = (drv_data->ops == &bfin_sport_transfer_ops_u8 ? 7 : 15);
 
 	bfin_sport_spi_disable(drv_data);
 	dev_dbg(drv_data->dev, "restoring spi ctl state\n");
 
 	bfin_write(&drv_data->regs->tcr1, chip->ctl_reg);
-	bfin_write(&drv_data->regs->tcr2, bits);
 	bfin_write(&drv_data->regs->tclkdiv, chip->baud);
-	bfin_write(&drv_data->regs->tfsdiv, bits);
 	SSYNC();
 
 	bfin_write(&drv_data->regs->rcr1, chip->ctl_reg & ~(ITCLK | ITFS));
-	bfin_write(&drv_data->regs->rcr2, bits);
 	SSYNC();
 
 	bfin_sport_spi_cs_active(chip);
@@ -420,11 +416,15 @@ bfin_sport_spi_pump_transfers(unsigned long data)
 	drv_data->cs_change = transfer->cs_change;
 
 	/* Bits per word setup */
-	bits_per_word = transfer->bits_per_word ? : message->spi->bits_per_word;
-	if (bits_per_word == 8)
-		drv_data->ops = &bfin_sport_transfer_ops_u8;
-	else
+	bits_per_word = transfer->bits_per_word ? :
+		message->spi->bits_per_word ? : 8;
+	if (bits_per_word % 16 == 0)
 		drv_data->ops = &bfin_sport_transfer_ops_u16;
+	else
+		drv_data->ops = &bfin_sport_transfer_ops_u8;
+	bfin_write(&drv_data->regs->tcr2, bits_per_word - 1);
+	bfin_write(&drv_data->regs->tfsdiv, bits_per_word - 1);
+	bfin_write(&drv_data->regs->rcr2, bits_per_word - 1);
 
 	drv_data->state = RUNNING_STATE;
 
@@ -598,11 +598,12 @@ bfin_sport_spi_setup(struct spi_device *spi)
 			}
 			chip->cs_chg_udelay = chip_info->cs_chg_udelay;
 			chip->idle_tx_val = chip_info->idle_tx_val;
-			spi->bits_per_word = chip_info->bits_per_word;
 		}
 	}
 
-	if (spi->bits_per_word != 8 && spi->bits_per_word != 16) {
+	if (spi->bits_per_word % 8) {
+		dev_err(&spi->dev, "%d bits_per_word is not supported\n",
+				spi->bits_per_word);
 		ret = -EINVAL;
 		goto error;
 	}
diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c
index 3b83ff8b1e2b..9bb4d4af8547 100644
--- a/drivers/spi/spi-bfin5xx.c
+++ b/drivers/spi/spi-bfin5xx.c
@@ -396,7 +396,7 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id)
 		/* last read */
 		if (drv_data->rx) {
 			dev_dbg(&drv_data->pdev->dev, "last read\n");
-			if (n_bytes % 2) {
+			if (!(n_bytes % 2)) {
 				u16 *buf = (u16 *)drv_data->rx;
 				for (loop = 0; loop < n_bytes / 2; loop++)
 					*buf++ = bfin_read(&drv_data->regs->rdbr);
@@ -424,7 +424,7 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id)
 	if (drv_data->rx && drv_data->tx) {
 		/* duplex */
 		dev_dbg(&drv_data->pdev->dev, "duplex: write_TDBR\n");
-		if (n_bytes % 2) {
+		if (!(n_bytes % 2)) {
 			u16 *buf = (u16 *)drv_data->rx;
 			u16 *buf2 = (u16 *)drv_data->tx;
 			for (loop = 0; loop < n_bytes / 2; loop++) {
@@ -442,7 +442,7 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id)
 	} else if (drv_data->rx) {
 		/* read */
 		dev_dbg(&drv_data->pdev->dev, "read: write_TDBR\n");
-		if (n_bytes % 2) {
+		if (!(n_bytes % 2)) {
 			u16 *buf = (u16 *)drv_data->rx;
 			for (loop = 0; loop < n_bytes / 2; loop++) {
 				*buf++ = bfin_read(&drv_data->regs->rdbr);
@@ -458,7 +458,7 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id)
 	} else if (drv_data->tx) {
 		/* write */
 		dev_dbg(&drv_data->pdev->dev, "write: write_TDBR\n");
-		if (n_bytes % 2) {
+		if (!(n_bytes % 2)) {
 			u16 *buf = (u16 *)drv_data->tx;
 			for (loop = 0; loop < n_bytes / 2; loop++) {
 				bfin_read(&drv_data->regs->rdbr);
@@ -587,6 +587,7 @@ static void bfin_spi_pump_transfers(unsigned long data)
 	if (message->state == DONE_STATE) {
 		dev_dbg(&drv_data->pdev->dev, "transfer: all done!\n");
 		message->status = 0;
+		bfin_spi_flush(drv_data);
 		bfin_spi_giveback(drv_data);
 		return;
 	}
@@ -870,8 +871,10 @@ static void bfin_spi_pump_transfers(unsigned long data)
 		message->actual_length += drv_data->len_in_bytes;
 		/* Move to next transfer of this msg */
 		message->state = bfin_spi_next_transfer(drv_data);
-		if (drv_data->cs_change)
+		if (drv_data->cs_change && message->state != DONE_STATE) {
+			bfin_spi_flush(drv_data);
 			bfin_spi_cs_deactive(drv_data, chip);
+		}
 	}
 
 	/* Schedule next transfer tasklet */
@@ -1026,7 +1029,6 @@ static int bfin_spi_setup(struct spi_device *spi)
 		chip->cs_chg_udelay = chip_info->cs_chg_udelay;
 		chip->idle_tx_val = chip_info->idle_tx_val;
 		chip->pio_interrupt = chip_info->pio_interrupt;
-		spi->bits_per_word = chip_info->bits_per_word;
 	} else {
 		/* force a default base state */
 		chip->ctl_reg &= bfin_ctl_reg;
diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
index 6db2887852d6..e8055073e84d 100644
--- a/drivers/spi/spi-ep93xx.c
+++ b/drivers/spi/spi-ep93xx.c
@@ -545,13 +545,12 @@ static void ep93xx_spi_pio_transfer(struct ep93xx_spi *espi)
  * in case of failure.
  */
 static struct dma_async_tx_descriptor *
-ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir)
+ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir)
 {
 	struct spi_transfer *t = espi->current_msg->state;
 	struct dma_async_tx_descriptor *txd;
 	enum dma_slave_buswidth buswidth;
 	struct dma_slave_config conf;
-	enum dma_transfer_direction slave_dirn;
 	struct scatterlist *sg;
 	struct sg_table *sgt;
 	struct dma_chan *chan;
@@ -567,14 +566,13 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir)
 	memset(&conf, 0, sizeof(conf));
 	conf.direction = dir;
 
-	if (dir == DMA_FROM_DEVICE) {
+	if (dir == DMA_DEV_TO_MEM) {
 		chan = espi->dma_rx;
 		buf = t->rx_buf;
 		sgt = &espi->rx_sgt;
 
 		conf.src_addr = espi->sspdr_phys;
 		conf.src_addr_width = buswidth;
-		slave_dirn = DMA_DEV_TO_MEM;
 	} else {
 		chan = espi->dma_tx;
 		buf = t->tx_buf;
@@ -582,7 +580,6 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir)
 
 		conf.dst_addr = espi->sspdr_phys;
 		conf.dst_addr_width = buswidth;
-		slave_dirn = DMA_MEM_TO_DEV;
 	}
 
 	ret = dmaengine_slave_config(chan, &conf);
@@ -633,8 +630,7 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir)
 	if (!nents)
 		return ERR_PTR(-ENOMEM);
 
-	txd = dmaengine_prep_slave_sg(chan, sgt->sgl, nents,
-					slave_dirn, DMA_CTRL_ACK);
+	txd = dmaengine_prep_slave_sg(chan, sgt->sgl, nents, dir, DMA_CTRL_ACK);
 	if (!txd) {
 		dma_unmap_sg(chan->device->dev, sgt->sgl, sgt->nents, dir);
 		return ERR_PTR(-ENOMEM);
@@ -651,12 +647,12 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir)
  * unmapped.
  */
 static void ep93xx_spi_dma_finish(struct ep93xx_spi *espi,
-				  enum dma_data_direction dir)
+				  enum dma_transfer_direction dir)
 {
 	struct dma_chan *chan;
 	struct sg_table *sgt;
 
-	if (dir == DMA_FROM_DEVICE) {
+	if (dir == DMA_DEV_TO_MEM) {
 		chan = espi->dma_rx;
 		sgt = &espi->rx_sgt;
 	} else {
@@ -677,16 +673,16 @@ static void ep93xx_spi_dma_transfer(struct ep93xx_spi *espi)
 	struct spi_message *msg = espi->current_msg;
 	struct dma_async_tx_descriptor *rxd, *txd;
 
-	rxd = ep93xx_spi_dma_prepare(espi, DMA_FROM_DEVICE);
+	rxd = ep93xx_spi_dma_prepare(espi, DMA_DEV_TO_MEM);
 	if (IS_ERR(rxd)) {
 		dev_err(&espi->pdev->dev, "DMA RX failed: %ld\n", PTR_ERR(rxd));
 		msg->status = PTR_ERR(rxd);
 		return;
 	}
 
-	txd = ep93xx_spi_dma_prepare(espi, DMA_TO_DEVICE);
+	txd = ep93xx_spi_dma_prepare(espi, DMA_MEM_TO_DEV);
 	if (IS_ERR(txd)) {
-		ep93xx_spi_dma_finish(espi, DMA_FROM_DEVICE);
+		ep93xx_spi_dma_finish(espi, DMA_DEV_TO_MEM);
 		dev_err(&espi->pdev->dev, "DMA TX failed: %ld\n", PTR_ERR(rxd));
 		msg->status = PTR_ERR(txd);
 		return;
@@ -705,8 +701,8 @@ static void ep93xx_spi_dma_transfer(struct ep93xx_spi *espi)
 
 	wait_for_completion(&espi->wait);
 
-	ep93xx_spi_dma_finish(espi, DMA_TO_DEVICE);
-	ep93xx_spi_dma_finish(espi, DMA_FROM_DEVICE);
+	ep93xx_spi_dma_finish(espi, DMA_MEM_TO_DEV);
+	ep93xx_spi_dma_finish(espi, DMA_DEV_TO_MEM);
 }
 
 /**
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index 09c925aaf320..400ae2121a2a 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -1667,9 +1667,15 @@ static int calculate_effective_freq(struct pl022 *pl022, int freq, struct
 	/* cpsdvsr = 254 & scr = 255 */
 	min_tclk = spi_rate(rate, CPSDVR_MAX, SCR_MAX);
 
-	if (!((freq <= max_tclk) && (freq >= min_tclk))) {
+	if (freq > max_tclk)
+		dev_warn(&pl022->adev->dev,
+			"Max speed that can be programmed is %d Hz, you requested %d\n",
+			max_tclk, freq);
+
+	if (freq < min_tclk) {
 		dev_err(&pl022->adev->dev,
-			"controller data is incorrect: out of range frequency");
+			"Requested frequency: %d Hz is less than minimum possible %d Hz\n",
+			freq, min_tclk);
 		return -EINVAL;
 	}
 
@@ -1681,26 +1687,37 @@ static int calculate_effective_freq(struct pl022 *pl022, int freq, struct
 		while (scr <= SCR_MAX) {
 			tmp = spi_rate(rate, cpsdvsr, scr);
 
-			if (tmp > freq)
+			if (tmp > freq) {
+				/* we need lower freq */
 				scr++;
+				continue;
+			}
+
 			/*
-			 * If found exact value, update and break.
-			 * If found more closer value, update and continue.
+			 * If found exact value, mark found and break.
+			 * If found more closer value, update and break.
 			 */
-			else if ((tmp == freq) || (tmp > best_freq)) {
+			if (tmp > best_freq) {
 				best_freq = tmp;
 				best_cpsdvsr = cpsdvsr;
 				best_scr = scr;
 
 				if (tmp == freq)
-					break;
+					found = 1;
 			}
-			scr++;
+			/*
+			 * increased scr will give lower rates, which are not
+			 * required
+			 */
+			break;
 		}
 		cpsdvsr += 2;
 		scr = SCR_MIN;
 	}
 
+	WARN(!best_freq, "pl022: Matching cpsdvsr and scr not found for %d Hz rate \n",
+			freq);
+
 	clk_freq->cpsdvsr = (u8) (best_cpsdvsr & 0xFF);
 	clk_freq->scr = (u8) (best_scr & 0xFF);
 	dev_dbg(&pl022->adev->dev,
@@ -1823,9 +1840,12 @@ static int pl022_setup(struct spi_device *spi)
 	} else
 		chip->cs_control = chip_info->cs_control;
 
-	if (bits <= 3) {
-		/* PL022 doesn't support less than 4-bits */
+	/* Check bits per word with vendor specific range */
+	if ((bits <= 3) || (bits > pl022->vendor->max_bpw)) {
 		status = -ENOTSUPP;
+		dev_err(&spi->dev, "illegal data size for this controller!\n");
+		dev_err(&spi->dev, "This controller can only handle 4 <= n <= %d bit words\n",
+				pl022->vendor->max_bpw);
 		goto err_config_params;
 	} else if (bits <= 8) {
 		dev_dbg(&spi->dev, "4 <= n <=8 bits per word\n");
@@ -1838,20 +1858,10 @@ static int pl022_setup(struct spi_device *spi)
 		chip->read = READING_U16;
 		chip->write = WRITING_U16;
 	} else {
-		if (pl022->vendor->max_bpw >= 32) {
-			dev_dbg(&spi->dev, "17 <= n <= 32 bits per word\n");
-			chip->n_bytes = 4;
-			chip->read = READING_U32;
-			chip->write = WRITING_U32;
-		} else {
-			dev_err(&spi->dev,
-				"illegal data size for this controller!\n");
-			dev_err(&spi->dev,
-				"a standard pl022 can only handle "
-				"1 <= n <= 16 bit words\n");
-			status = -ENOTSUPP;
-			goto err_config_params;
-		}
+		dev_dbg(&spi->dev, "17 <= n <= 32 bits per word\n");
+		chip->n_bytes = 4;
+		chip->read = READING_U32;
+		chip->write = WRITING_U32;
 	}
 
 	/* Now Initialize all register settings required for this chip */