Merge tag 'mtd/fixes-for-5.0-rc6' of git://git.infradead.org/linux-mtd

Pull mtd fixes from Boris Brezillon:

 - Fix a problem with the imx28 ECC engine

 - Remove a debug trace introduced in 2b6f0090a333 ("mtd: Check
   add_mtd_device() ret code")

 - Make sure partitions of size 0 can be registered

 - Fix kernel-doc warning in the rawnand core

 - Fix the error path of spinand_init() (missing manufacturer cleanup in
   a few places)

 - Address a problem with the SPI NAND PROGRAM LOAD operation which does
   not work as expected on some parts.

* tag 'mtd/fixes-for-5.0-rc6' of git://git.infradead.org/linux-mtd:
  mtd: rawnand: gpmi: fix MX28 bus master lockup problem
  mtd: Make sure mtd->erasesize is valid even if the partition is of size 0
  mtd: Remove a debug trace in mtdpart.c
  mtd: rawnand: fix kernel-doc warnings
  mtd: spinand: Fix the error/cleanup path in spinand_init()
  mtd: spinand: Handle the case where PROGRAM LOAD does not reset the cache

5 files changed, 34 insertions, 33 deletions

diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 60104e1079c5..37f174ccbcec 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -480,6 +480,10 @@ static struct mtd_part *allocate_partition(struct mtd_info *parent,
 		/* let's register it anyway to preserve ordering */
 		slave->offset = 0;
 		slave->mtd.size = 0;
+
+		/* Initialize ->erasesize to make add_mtd_device() happy. */
+		slave->mtd.erasesize = parent->erasesize;
+
 		printk(KERN_ERR"mtd: partition \"%s\" is out of reach -- disabled\n",
 			part->name);
 		goto out_register;
@@ -632,7 +636,6 @@ err_remove_part:
 	mutex_unlock(&mtd_partitions_mutex);
 
 	free_partition(new);
-	pr_info("%s:%i\n", __func__, __LINE__);
 
 	return ret;
 }
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
index bd4cfac6b5aa..a4768df5083f 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
@@ -155,9 +155,10 @@ int gpmi_init(struct gpmi_nand_data *this)
 
 	/*
 	 * Reset BCH here, too. We got failures otherwise :(
-	 * See later BCH reset for explanation of MX23 handling
+	 * See later BCH reset for explanation of MX23 and MX28 handling
 	 */
-	ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this));
+	ret = gpmi_reset_block(r->bch_regs,
+			       GPMI_IS_MX23(this) || GPMI_IS_MX28(this));
 	if (ret)
 		goto err_out;
 
@@ -263,12 +264,10 @@ int bch_set_geometry(struct gpmi_nand_data *this)
 	/*
 	* Due to erratum #2847 of the MX23, the BCH cannot be soft reset on this
 	* chip, otherwise it will lock up. So we skip resetting BCH on the MX23.
-	* On the other hand, the MX28 needs the reset, because one case has been
-	* seen where the BCH produced ECC errors constantly after 10000
-	* consecutive reboots. The latter case has not been seen on the MX23
-	* yet, still we don't know if it could happen there as well.
+	* and MX28.
 	*/
-	ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this));
+	ret = gpmi_reset_block(r->bch_regs,
+			       GPMI_IS_MX23(this) || GPMI_IS_MX28(this));
 	if (ret)
 		goto err_out;
 
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index cca4b24d2ffa..839494ac457c 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -410,6 +410,7 @@ static int nand_check_wp(struct nand_chip *chip)
 
 /**
  * nand_fill_oob - [INTERN] Transfer client buffer to oob
+ * @chip: NAND chip object
  * @oob: oob data buffer
  * @len: oob data write length
  * @ops: oob ops structure
diff --git a/drivers/mtd/nand/raw/nand_bbt.c b/drivers/mtd/nand/raw/nand_bbt.c
index 1b722fe9213c..19a2b563acdf 100644
--- a/drivers/mtd/nand/raw/nand_bbt.c
+++ b/drivers/mtd/nand/raw/nand_bbt.c
@@ -158,7 +158,7 @@ static u32 add_marker_len(struct nand_bbt_descr *td)
 
 /**
  * read_bbt - [GENERIC] Read the bad block table starting from page
- * @chip: NAND chip object
+ * @this: NAND chip object
  * @buf: temporary buffer
  * @page: the starting page
  * @num: the number of bbt descriptors to read
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 479c2f2cf17f..fa87ae28cdfe 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -304,24 +304,30 @@ static int spinand_write_to_cache_op(struct spinand_device *spinand,
 	struct nand_device *nand = spinand_to_nand(spinand);
 	struct mtd_info *mtd = nanddev_to_mtd(nand);
 	struct nand_page_io_req adjreq = *req;
-	unsigned int nbytes = 0;
-	void *buf = NULL;
+	void *buf = spinand->databuf;
+	unsigned int nbytes;
 	u16 column = 0;
 	int ret;
 
-	memset(spinand->databuf, 0xff,
-	       nanddev_page_size(nand) +
-	       nanddev_per_page_oobsize(nand));
+	/*
+	 * Looks like PROGRAM LOAD (AKA write cache) does not necessarily reset
+	 * the cache content to 0xFF (depends on vendor implementation), so we
+	 * must fill the page cache entirely even if we only want to program
+	 * the data portion of the page, otherwise we might corrupt the BBM or
+	 * user data previously programmed in OOB area.
+	 */
+	nbytes = nanddev_page_size(nand) + nanddev_per_page_oobsize(nand);
+	memset(spinand->databuf, 0xff, nbytes);
+	adjreq.dataoffs = 0;
+	adjreq.datalen = nanddev_page_size(nand);
+	adjreq.databuf.out = spinand->databuf;
+	adjreq.ooblen = nanddev_per_page_oobsize(nand);
+	adjreq.ooboffs = 0;
+	adjreq.oobbuf.out = spinand->oobbuf;
 
-	if (req->datalen) {
+	if (req->datalen)
 		memcpy(spinand->databuf + req->dataoffs, req->databuf.out,
 		       req->datalen);
-		adjreq.dataoffs = 0;
-		adjreq.datalen = nanddev_page_size(nand);
-		adjreq.databuf.out = spinand->databuf;
-		nbytes = adjreq.datalen;
-		buf = spinand->databuf;
-	}
 
 	if (req->ooblen) {
 		if (req->mode == MTD_OPS_AUTO_OOB)
@@ -332,14 +338,6 @@ static int spinand_write_to_cache_op(struct spinand_device *spinand,
 		else
 			memcpy(spinand->oobbuf + req->ooboffs, req->oobbuf.out,
 			       req->ooblen);
-
-		adjreq.ooblen = nanddev_per_page_oobsize(nand);
-		adjreq.ooboffs = 0;
-		nbytes += nanddev_per_page_oobsize(nand);
-		if (!buf) {
-			buf = spinand->oobbuf;
-			column = nanddev_page_size(nand);
-		}
 	}
 
 	spinand_cache_op_adjust_colum(spinand, &adjreq, &column);
@@ -370,8 +368,8 @@ static int spinand_write_to_cache_op(struct spinand_device *spinand,
 
 		/*
 		 * We need to use the RANDOM LOAD CACHE operation if there's
-		 * more than one iteration, because the LOAD operation resets
-		 * the cache to 0xff.
+		 * more than one iteration, because the LOAD operation might
+		 * reset the cache to 0xff.
 		 */
 		if (nbytes) {
 			column = op.addr.val;
@@ -1018,11 +1016,11 @@ static int spinand_init(struct spinand_device *spinand)
 	for (i = 0; i < nand->memorg.ntargets; i++) {
 		ret = spinand_select_target(spinand, i);
 		if (ret)
-			goto err_free_bufs;
+			goto err_manuf_cleanup;
 
 		ret = spinand_lock_block(spinand, BL_ALL_UNLOCKED);
 		if (ret)
-			goto err_free_bufs;
+			goto err_manuf_cleanup;
 	}
 
 	ret = nanddev_init(nand, &spinand_ops, THIS_MODULE);