Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2015-05-04

Here's the first bluetooth-next pull request for 4.2:

 - Various fixes for at86rf230 driver
 - ieee802154: trace events support for rdev->ops
 - HCI UART driver refactoring
 - New Realtek IDs added to btusb driver
 - Off-by-one fix for rtl8723b in btusb driver
 - Refactoring of btbcm driver for both UART & USB use

Please let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

6 files changed, 755 insertions, 293 deletions

diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index 4f7e8d400bc0..6de97b3871b0 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -227,7 +227,6 @@ static void bt3c_receive(struct bt3c_info *info)
 	iobase = info->p_dev->resource[0]->start;
 
 	avail = bt3c_read(iobase, 0x7006);
-	//printk("bt3c_cs: receiving %d bytes\n", avail);
 
 	bt3c_address(iobase, 0x7480);
 	while (size < avail) {
@@ -250,7 +249,6 @@ static void bt3c_receive(struct bt3c_info *info)
 
 			bt_cb(info->rx_skb)->pkt_type = inb(iobase + DATA_L);
 			inb(iobase + DATA_H);
-			//printk("bt3c: PACKET_TYPE=%02x\n", bt_cb(info->rx_skb)->pkt_type);
 
 			switch (bt_cb(info->rx_skb)->pkt_type) {
 
@@ -364,7 +362,6 @@ static irqreturn_t bt3c_interrupt(int irq, void *dev_inst)
 			if (stat & 0x0001)
 				bt3c_receive(info);
 			if (stat & 0x0002) {
-				//BT_ERR("Ack (stat=0x%04x)", stat);
 				clear_bit(XMIT_SENDING, &(info->tx_state));
 				bt3c_write_wakeup(info);
 			}
diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index d0741f3ed7ec..4bba86677adc 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -95,6 +95,78 @@ int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
 }
 EXPORT_SYMBOL_GPL(btbcm_set_bdaddr);
 
+int btbcm_patchram(struct hci_dev *hdev, const char *firmware)
+{
+	const struct hci_command_hdr *cmd;
+	const struct firmware *fw;
+	const u8 *fw_ptr;
+	size_t fw_size;
+	struct sk_buff *skb;
+	u16 opcode;
+	int err;
+
+	err = request_firmware(&fw, firmware, &hdev->dev);
+	if (err < 0) {
+		BT_INFO("%s: BCM: Patch %s not found", hdev->name, firmware);
+		return err;
+	}
+
+	/* Start Download */
+	skb = __hci_cmd_sync(hdev, 0xfc2e, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		BT_ERR("%s: BCM: Download Minidrv command failed (%d)",
+		       hdev->name, err);
+		goto done;
+	}
+	kfree_skb(skb);
+
+	/* 50 msec delay after Download Minidrv completes */
+	msleep(50);
+
+	fw_ptr = fw->data;
+	fw_size = fw->size;
+
+	while (fw_size >= sizeof(*cmd)) {
+		const u8 *cmd_param;
+
+		cmd = (struct hci_command_hdr *)fw_ptr;
+		fw_ptr += sizeof(*cmd);
+		fw_size -= sizeof(*cmd);
+
+		if (fw_size < cmd->plen) {
+			BT_ERR("%s: BCM: Patch %s is corrupted", hdev->name,
+			       firmware);
+			err = -EINVAL;
+			goto done;
+		}
+
+		cmd_param = fw_ptr;
+		fw_ptr += cmd->plen;
+		fw_size -= cmd->plen;
+
+		opcode = le16_to_cpu(cmd->opcode);
+
+		skb = __hci_cmd_sync(hdev, opcode, cmd->plen, cmd_param,
+				     HCI_INIT_TIMEOUT);
+		if (IS_ERR(skb)) {
+			err = PTR_ERR(skb);
+			BT_ERR("%s: BCM: Patch command %04x failed (%d)",
+			       hdev->name, opcode, err);
+			goto done;
+		}
+		kfree_skb(skb);
+	}
+
+	/* 250 msec delay after Launch Ram completes */
+	msleep(250);
+
+done:
+	release_firmware(fw);
+	return err;
+}
+EXPORT_SYMBOL(btbcm_patchram);
+
 static int btbcm_reset(struct hci_dev *hdev)
 {
 	struct sk_buff *skb;
@@ -198,12 +270,8 @@ static const struct {
 
 int btbcm_setup_patchram(struct hci_dev *hdev)
 {
-	const struct hci_command_hdr *cmd;
-	const struct firmware *fw;
-	const u8 *fw_ptr;
-	size_t fw_size;
 	char fw_name[64];
-	u16 opcode, subver, rev, pid, vid;
+	u16 subver, rev, pid, vid;
 	const char *hw_name = NULL;
 	struct sk_buff *skb;
 	struct hci_rp_read_local_version *ver;
@@ -273,74 +341,19 @@ int btbcm_setup_patchram(struct hci_dev *hdev)
 		hw_name ? : "BCM", (subver & 0x7000) >> 13,
 		(subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
 
-	err = request_firmware(&fw, fw_name, &hdev->dev);
-	if (err < 0) {
-		BT_INFO("%s: BCM: patch %s not found", hdev->name, fw_name);
+	err = btbcm_patchram(hdev, fw_name);
+	if (err == -ENOENT)
 		return 0;
-	}
-
-	/* Start Download */
-	skb = __hci_cmd_sync(hdev, 0xfc2e, 0, NULL, HCI_INIT_TIMEOUT);
-	if (IS_ERR(skb)) {
-		err = PTR_ERR(skb);
-		BT_ERR("%s: BCM: Download Minidrv command failed (%d)",
-		       hdev->name, err);
-		goto reset;
-	}
-	kfree_skb(skb);
-
-	/* 50 msec delay after Download Minidrv completes */
-	msleep(50);
-
-	fw_ptr = fw->data;
-	fw_size = fw->size;
-
-	while (fw_size >= sizeof(*cmd)) {
-		const u8 *cmd_param;
-
-		cmd = (struct hci_command_hdr *)fw_ptr;
-		fw_ptr += sizeof(*cmd);
-		fw_size -= sizeof(*cmd);
-
-		if (fw_size < cmd->plen) {
-			BT_ERR("%s: BCM: patch %s is corrupted", hdev->name,
-			       fw_name);
-			err = -EINVAL;
-			goto reset;
-		}
 
-		cmd_param = fw_ptr;
-		fw_ptr += cmd->plen;
-		fw_size -= cmd->plen;
-
-		opcode = le16_to_cpu(cmd->opcode);
-
-		skb = __hci_cmd_sync(hdev, opcode, cmd->plen, cmd_param,
-				     HCI_INIT_TIMEOUT);
-		if (IS_ERR(skb)) {
-			err = PTR_ERR(skb);
-			BT_ERR("%s: BCM: patch command %04x failed (%d)",
-			       hdev->name, opcode, err);
-			goto reset;
-		}
-		kfree_skb(skb);
-	}
-
-	/* 250 msec delay after Launch Ram completes */
-	msleep(250);
-
-reset:
 	/* Reset */
 	err = btbcm_reset(hdev);
 	if (err)
-		goto done;
+		return err;
 
 	/* Read Local Version Info */
 	skb = btbcm_read_local_version(hdev);
-	if (IS_ERR(skb)) {
-		err = PTR_ERR(skb);
-		goto done;
-	}
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
 
 	ver = (struct hci_rp_read_local_version *)skb->data;
 	rev = le16_to_cpu(ver->hci_rev);
@@ -355,10 +368,7 @@ reset:
 
 	set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
 
-done:
-	release_firmware(fw);
-
-	return err;
+	return 0;
 }
 EXPORT_SYMBOL_GPL(btbcm_setup_patchram);
 
diff --git a/drivers/bluetooth/btbcm.h b/drivers/bluetooth/btbcm.h
index 34268ae3eb46..eb6ab5f9483d 100644
--- a/drivers/bluetooth/btbcm.h
+++ b/drivers/bluetooth/btbcm.h
@@ -25,6 +25,7 @@
 
 int btbcm_check_bdaddr(struct hci_dev *hdev);
 int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
+int btbcm_patchram(struct hci_dev *hdev, const char *firmware);
 
 int btbcm_setup_patchram(struct hci_dev *hdev);
 int btbcm_setup_apple(struct hci_dev *hdev);
@@ -41,6 +42,11 @@ static inline int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
 	return -EOPNOTSUPP;
 }
 
+static inline int btbcm_patchram(struct hci_dev *hdev, const char *firmware)
+{
+	return -EOPNOTSUPP;
+}
+
 static inline int btbcm_setup_patchram(struct hci_dev *hdev)
 {
 	return 0;
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index de7b236eeae7..d21f3b4176d3 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -24,6 +24,7 @@
 #include <linux/module.h>
 #include <linux/usb.h>
 #include <linux/firmware.h>
+#include <asm/unaligned.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
@@ -57,6 +58,7 @@ static struct usb_driver btusb_driver;
 #define BTUSB_AMP		0x4000
 #define BTUSB_QCA_ROME		0x8000
 #define BTUSB_BCM_APPLE		0x10000
+#define BTUSB_REALTEK		0x20000
 
 static const struct usb_device_id btusb_table[] = {
 	/* Generic Bluetooth USB device */
@@ -288,6 +290,28 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
 	  .driver_info = BTUSB_IGNORE },
 
+	/* Realtek Bluetooth devices */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
+	  .driver_info = BTUSB_REALTEK },
+
+	/* Additional Realtek 8723AE Bluetooth devices */
+	{ USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3394), .driver_info = BTUSB_REALTEK },
+
+	/* Additional Realtek 8723BE Bluetooth devices */
+	{ USB_DEVICE(0x0489, 0xe085), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x0489, 0xe08b), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3410), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3416), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3459), .driver_info = BTUSB_REALTEK },
+
+	/* Additional Realtek 8821AE Bluetooth devices */
+	{ USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3458), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3461), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3462), .driver_info = BTUSB_REALTEK },
+
 	{ }	/* Terminating entry */
 };
 
@@ -892,7 +916,7 @@ static int btusb_open(struct hci_dev *hdev)
 	 */
 	if (data->setup_on_usb) {
 		err = data->setup_on_usb(hdev);
-		if (err <0)
+		if (err < 0)
 			return err;
 	}
 
@@ -1345,6 +1369,378 @@ static int btusb_setup_csr(struct hci_dev *hdev)
 	return ret;
 }
 
+#define RTL_FRAG_LEN 252
+
+struct rtl_download_cmd {
+	__u8 index;
+	__u8 data[RTL_FRAG_LEN];
+} __packed;
+
+struct rtl_download_response {
+	__u8 status;
+	__u8 index;
+} __packed;
+
+struct rtl_rom_version_evt {
+	__u8 status;
+	__u8 version;
+} __packed;
+
+struct rtl_epatch_header {
+	__u8 signature[8];
+	__le32 fw_version;
+	__le16 num_patches;
+} __packed;
+
+#define RTL_EPATCH_SIGNATURE	"Realtech"
+#define RTL_ROM_LMP_3499	0x3499
+#define RTL_ROM_LMP_8723A	0x1200
+#define RTL_ROM_LMP_8723B	0x8723
+#define RTL_ROM_LMP_8821A	0x8821
+#define RTL_ROM_LMP_8761A	0x8761
+
+static int rtl_read_rom_version(struct hci_dev *hdev, u8 *version)
+{
+	struct rtl_rom_version_evt *rom_version;
+	struct sk_buff *skb;
+	int ret;
+
+	/* Read RTL ROM version command */
+	skb = __hci_cmd_sync(hdev, 0xfc6d, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s: Read ROM version failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+
+	if (skb->len != sizeof(*rom_version)) {
+		BT_ERR("%s: RTL version event length mismatch", hdev->name);
+		kfree_skb(skb);
+		return -EIO;
+	}
+
+	rom_version = (struct rtl_rom_version_evt *)skb->data;
+	BT_INFO("%s: rom_version status=%x version=%x",
+		hdev->name, rom_version->status, rom_version->version);
+
+	ret = rom_version->status;
+	if (ret == 0)
+		*version = rom_version->version;
+
+	kfree_skb(skb);
+	return ret;
+}
+
+static int rtl8723b_parse_firmware(struct hci_dev *hdev, u16 lmp_subver,
+				   const struct firmware *fw,
+				   unsigned char **_buf)
+{
+	const u8 extension_sig[] = { 0x51, 0x04, 0xfd, 0x77 };
+	struct rtl_epatch_header *epatch_info;
+	unsigned char *buf;
+	int i, ret, len;
+	size_t min_size;
+	u8 opcode, length, data, rom_version = 0;
+	int project_id = -1;
+	const unsigned char *fwptr, *chip_id_base;
+	const unsigned char *patch_length_base, *patch_offset_base;
+	u32 patch_offset = 0;
+	u16 patch_length, num_patches;
+	const u16 project_id_to_lmp_subver[] = {
+		RTL_ROM_LMP_8723A,
+		RTL_ROM_LMP_8723B,
+		RTL_ROM_LMP_8821A,
+		RTL_ROM_LMP_8761A
+	};
+
+	ret = rtl_read_rom_version(hdev, &rom_version);
+	if (ret)
+		return -bt_to_errno(ret);
+
+	min_size = sizeof(struct rtl_epatch_header) + sizeof(extension_sig) + 3;
+	if (fw->size < min_size)
+		return -EINVAL;
+
+	fwptr = fw->data + fw->size - sizeof(extension_sig);
+	if (memcmp(fwptr, extension_sig, sizeof(extension_sig)) != 0) {
+		BT_ERR("%s: extension section signature mismatch", hdev->name);
+		return -EINVAL;
+	}
+
+	/* Loop from the end of the firmware parsing instructions, until
+	 * we find an instruction that identifies the "project ID" for the
+	 * hardware supported by this firwmare file.
+	 * Once we have that, we double-check that that project_id is suitable
+	 * for the hardware we are working with.
+	 */
+	while (fwptr >= fw->data + (sizeof(struct rtl_epatch_header) + 3)) {
+		opcode = *--fwptr;
+		length = *--fwptr;
+		data = *--fwptr;
+
+		BT_DBG("check op=%x len=%x data=%x", opcode, length, data);
+
+		if (opcode == 0xff) /* EOF */
+			break;
+
+		if (length == 0) {
+			BT_ERR("%s: found instruction with length 0",
+			       hdev->name);
+			return -EINVAL;
+		}
+
+		if (opcode == 0 && length == 1) {
+			project_id = data;
+			break;
+		}
+
+		fwptr -= length;
+	}
+
+	if (project_id < 0) {
+		BT_ERR("%s: failed to find version instruction", hdev->name);
+		return -EINVAL;
+	}
+
+	if (project_id >= ARRAY_SIZE(project_id_to_lmp_subver)) {
+		BT_ERR("%s: unknown project id %d", hdev->name, project_id);
+		return -EINVAL;
+	}
+
+	if (lmp_subver != project_id_to_lmp_subver[project_id]) {
+		BT_ERR("%s: firmware is for %x but this is a %x", hdev->name,
+		       project_id_to_lmp_subver[project_id], lmp_subver);
+		return -EINVAL;
+	}
+
+	epatch_info = (struct rtl_epatch_header *)fw->data;
+	if (memcmp(epatch_info->signature, RTL_EPATCH_SIGNATURE, 8) != 0) {
+		BT_ERR("%s: bad EPATCH signature", hdev->name);
+		return -EINVAL;
+	}
+
+	num_patches = le16_to_cpu(epatch_info->num_patches);
+	BT_DBG("fw_version=%x, num_patches=%d",
+	       le32_to_cpu(epatch_info->fw_version), num_patches);
+
+	/* After the rtl_epatch_header there is a funky patch metadata section.
+	 * Assuming 2 patches, the layout is:
+	 * ChipID1 ChipID2 PatchLength1 PatchLength2 PatchOffset1 PatchOffset2
+	 *
+	 * Find the right patch for this chip.
+	 */
+	min_size += 8 * num_patches;
+	if (fw->size < min_size)
+		return -EINVAL;
+
+	chip_id_base = fw->data + sizeof(struct rtl_epatch_header);
+	patch_length_base = chip_id_base + (sizeof(u16) * num_patches);
+	patch_offset_base = patch_length_base + (sizeof(u16) * num_patches);
+	for (i = 0; i < num_patches; i++) {
+		u16 chip_id = get_unaligned_le16(chip_id_base +
+						 (i * sizeof(u16)));
+		if (chip_id == rom_version + 1) {
+			patch_length = get_unaligned_le16(patch_length_base +
+							  (i * sizeof(u16)));
+			patch_offset = get_unaligned_le32(patch_offset_base +
+							  (i * sizeof(u32)));
+			break;
+		}
+	}
+
+	if (!patch_offset) {
+		BT_ERR("%s: didn't find patch for chip id %d",
+		       hdev->name, rom_version);
+		return -EINVAL;
+	}
+
+	BT_DBG("length=%x offset=%x index %d", patch_length, patch_offset, i);
+	min_size = patch_offset + patch_length;
+	if (fw->size < min_size)
+		return -EINVAL;
+
+	/* Copy the firmware into a new buffer and write the version at
+	 * the end.
+	 */
+	len = patch_length;
+	buf = kmemdup(fw->data + patch_offset, patch_length, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	memcpy(buf + patch_length - 4, &epatch_info->fw_version, 4);
+
+	*_buf = buf;
+	return len;
+}
+
+static int rtl_download_firmware(struct hci_dev *hdev,
+				 const unsigned char *data, int fw_len)
+{
+	struct rtl_download_cmd *dl_cmd;
+	int frag_num = fw_len / RTL_FRAG_LEN + 1;
+	int frag_len = RTL_FRAG_LEN;
+	int ret = 0;
+	int i;
+
+	dl_cmd = kmalloc(sizeof(struct rtl_download_cmd), GFP_KERNEL);
+	if (!dl_cmd)
+		return -ENOMEM;
+
+	for (i = 0; i < frag_num; i++) {
+		struct rtl_download_response *dl_resp;
+		struct sk_buff *skb;
+
+		BT_DBG("download fw (%d/%d)", i, frag_num);
+
+		dl_cmd->index = i;
+		if (i == (frag_num - 1)) {
+			dl_cmd->index |= 0x80; /* data end */
+			frag_len = fw_len % RTL_FRAG_LEN;
+		}
+		memcpy(dl_cmd->data, data, frag_len);
+
+		/* Send download command */
+		skb = __hci_cmd_sync(hdev, 0xfc20, frag_len + 1, dl_cmd,
+				     HCI_INIT_TIMEOUT);
+		if (IS_ERR(skb)) {
+			BT_ERR("%s: download fw command failed (%ld)",
+			       hdev->name, PTR_ERR(skb));
+			ret = -PTR_ERR(skb);
+			goto out;
+		}
+
+		if (skb->len != sizeof(*dl_resp)) {
+			BT_ERR("%s: download fw event length mismatch",
+			       hdev->name);
+			kfree_skb(skb);
+			ret = -EIO;
+			goto out;
+		}
+
+		dl_resp = (struct rtl_download_response *)skb->data;
+		if (dl_resp->status != 0) {
+			kfree_skb(skb);
+			ret = bt_to_errno(dl_resp->status);
+			goto out;
+		}
+
+		kfree_skb(skb);
+		data += RTL_FRAG_LEN;
+	}
+
+out:
+	kfree(dl_cmd);
+	return ret;
+}
+
+static int btusb_setup_rtl8723a(struct hci_dev *hdev)
+{
+	struct btusb_data *data = dev_get_drvdata(&hdev->dev);
+	struct usb_device *udev = interface_to_usbdev(data->intf);
+	const struct firmware *fw;
+	int ret;
+
+	BT_INFO("%s: rtl: loading rtl_bt/rtl8723a_fw.bin", hdev->name);
+	ret = request_firmware(&fw, "rtl_bt/rtl8723a_fw.bin", &udev->dev);
+	if (ret < 0) {
+		BT_ERR("%s: Failed to load rtl_bt/rtl8723a_fw.bin", hdev->name);
+		return ret;
+	}
+
+	if (fw->size < 8) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* Check that the firmware doesn't have the epatch signature
+	 * (which is only for RTL8723B and newer).
+	 */
+	if (!memcmp(fw->data, RTL_EPATCH_SIGNATURE, 8)) {
+		BT_ERR("%s: unexpected EPATCH signature!", hdev->name);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = rtl_download_firmware(hdev, fw->data, fw->size);
+
+out:
+	release_firmware(fw);
+	return ret;
+}
+
+static int btusb_setup_rtl8723b(struct hci_dev *hdev, u16 lmp_subver,
+				const char *fw_name)
+{
+	struct btusb_data *data = dev_get_drvdata(&hdev->dev);
+	struct usb_device *udev = interface_to_usbdev(data->intf);
+	unsigned char *fw_data = NULL;
+	const struct firmware *fw;
+	int ret;
+
+	BT_INFO("%s: rtl: loading %s", hdev->name, fw_name);
+	ret = request_firmware(&fw, fw_name, &udev->dev);
+	if (ret < 0) {
+		BT_ERR("%s: Failed to load %s", hdev->name, fw_name);
+		return ret;
+	}
+
+	ret = rtl8723b_parse_firmware(hdev, lmp_subver, fw, &fw_data);
+	if (ret < 0)
+		goto out;
+
+	ret = rtl_download_firmware(hdev, fw_data, ret);
+	kfree(fw_data);
+	if (ret < 0)
+		goto out;
+
+out:
+	release_firmware(fw);
+	return ret;
+}
+
+static int btusb_setup_realtek(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	struct hci_rp_read_local_version *resp;
+	u16 lmp_subver;
+
+	skb = btusb_read_local_version(hdev);
+	if (IS_ERR(skb))
+		return -PTR_ERR(skb);
+
+	resp = (struct hci_rp_read_local_version *)skb->data;
+	BT_INFO("%s: rtl: examining hci_ver=%02x hci_rev=%04x lmp_ver=%02x "
+		"lmp_subver=%04x", hdev->name, resp->hci_ver, resp->hci_rev,
+		resp->lmp_ver, resp->lmp_subver);
+
+	lmp_subver = le16_to_cpu(resp->lmp_subver);
+	kfree_skb(skb);
+
+	/* Match a set of subver values that correspond to stock firmware,
+	 * which is not compatible with standard btusb.
+	 * If matched, upload an alternative firmware that does conform to
+	 * standard btusb. Once that firmware is uploaded, the subver changes
+	 * to a different value.
+	 */
+	switch (lmp_subver) {
+	case RTL_ROM_LMP_8723A:
+	case RTL_ROM_LMP_3499:
+		return btusb_setup_rtl8723a(hdev);
+	case RTL_ROM_LMP_8723B:
+		return btusb_setup_rtl8723b(hdev, lmp_subver,
+					    "rtl_bt/rtl8723b_fw.bin");
+	case RTL_ROM_LMP_8821A:
+		return btusb_setup_rtl8723b(hdev, lmp_subver,
+					    "rtl_bt/rtl8821a_fw.bin");
+	case RTL_ROM_LMP_8761A:
+		return btusb_setup_rtl8723b(hdev, lmp_subver,
+					    "rtl_bt/rtl8761a_fw.bin");
+	default:
+		BT_INFO("rtl: assuming no firmware upload needed.");
+		return 0;
+	}
+}
+
 static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev,
 						       struct intel_version *ver)
 {
@@ -2577,7 +2973,7 @@ static int btusb_setup_qca(struct hci_dev *hdev)
 	int i, err;
 
 	err = btusb_qca_send_vendor_req(hdev, QCA_GET_TARGET_VERSION, &ver,
-				        sizeof(ver));
+					sizeof(ver));
 	if (err < 0)
 		return err;
 
@@ -2776,6 +3172,9 @@ static int btusb_probe(struct usb_interface *intf,
 		hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
 	}
 
+	if (id->driver_info & BTUSB_REALTEK)
+		hdev->setup = btusb_setup_realtek;
+
 	if (id->driver_info & BTUSB_AMP) {
 		/* AMP controllers do not support SCO packets */
 		data->isoc = NULL;
diff --git a/drivers/bluetooth/hci_ath.c b/drivers/bluetooth/hci_ath.c
index 1b3f8647ea2f..ec8fa0e0f036 100644
--- a/drivers/bluetooth/hci_ath.c
+++ b/drivers/bluetooth/hci_ath.c
@@ -95,7 +95,6 @@ static void ath_hci_uart_work(struct work_struct *work)
 	hci_uart_tx_wakeup(hu);
 }
 
-/* Initialize protocol */
 static int ath_open(struct hci_uart *hu)
 {
 	struct ath_struct *ath;
@@ -116,8 +115,7 @@ static int ath_open(struct hci_uart *hu)
 	return 0;
 }
 
-/* Flush protocol data */
-static int ath_flush(struct hci_uart *hu)
+static int ath_close(struct hci_uart *hu)
 {
 	struct ath_struct *ath = hu->priv;
 
@@ -125,11 +123,17 @@ static int ath_flush(struct hci_uart *hu)
 
 	skb_queue_purge(&ath->txq);
 
+	kfree_skb(ath->rx_skb);
+
+	cancel_work_sync(&ath->ctxtsw);
+
+	hu->priv = NULL;
+	kfree(ath);
+
 	return 0;
 }
 
-/* Close protocol */
-static int ath_close(struct hci_uart *hu)
+static int ath_flush(struct hci_uart *hu)
 {
 	struct ath_struct *ath = hu->priv;
 
@@ -137,19 +141,65 @@ static int ath_close(struct hci_uart *hu)
 
 	skb_queue_purge(&ath->txq);
 
-	kfree_skb(ath->rx_skb);
+	return 0;
+}
 
-	cancel_work_sync(&ath->ctxtsw);
+static int ath_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+	u8 buf[10];
+	int err;
+
+	buf[0] = 0x01;
+	buf[1] = 0x01;
+	buf[2] = 0x00;
+	buf[3] = sizeof(bdaddr_t);
+	memcpy(buf + 4, bdaddr, sizeof(bdaddr_t));
+
+	skb = __hci_cmd_sync(hdev, 0xfc0b, sizeof(buf), buf, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		BT_ERR("%s: Change address command failed (%d)",
+		       hdev->name, err);
+		return err;
+	}
+	kfree_skb(skb);
 
-	hu->priv = NULL;
-	kfree(ath);
+	return 0;
+}
+
+static int ath_setup(struct hci_uart *hu)
+{
+	BT_DBG("hu %p", hu);
+
+	hu->hdev->set_bdaddr = ath_set_bdaddr;
 
 	return 0;
 }
 
+static const struct h4_recv_pkt ath_recv_pkts[] = {
+	{ H4_RECV_ACL,   .recv = hci_recv_frame },
+	{ H4_RECV_SCO,   .recv = hci_recv_frame },
+	{ H4_RECV_EVENT, .recv = hci_recv_frame },
+};
+
+static int ath_recv(struct hci_uart *hu, const void *data, int count)
+{
+	struct ath_struct *ath = hu->priv;
+
+	ath->rx_skb = h4_recv_buf(hu->hdev, ath->rx_skb, data, count,
+				  ath_recv_pkts, ARRAY_SIZE(ath_recv_pkts));
+	if (IS_ERR(ath->rx_skb)) {
+		int err = PTR_ERR(ath->rx_skb);
+		BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err);
+		return err;
+	}
+
+	return count;
+}
+
 #define HCI_OP_ATH_SLEEP 0xFC04
 
-/* Enqueue frame for transmittion */
 static int ath_enqueue(struct hci_uart *hu, struct sk_buff *skb)
 {
 	struct ath_struct *ath = hu->priv;
@@ -159,8 +209,7 @@ static int ath_enqueue(struct hci_uart *hu, struct sk_buff *skb)
 		return 0;
 	}
 
-	/*
-	 * Update power management enable flag with parameters of
+	/* Update power management enable flag with parameters of
 	 * HCI sleep enable vendor specific HCI command.
 	 */
 	if (bt_cb(skb)->pkt_type == HCI_COMMAND_PKT) {
@@ -190,37 +239,16 @@ static struct sk_buff *ath_dequeue(struct hci_uart *hu)
 	return skb_dequeue(&ath->txq);
 }
 
-static const struct h4_recv_pkt ath_recv_pkts[] = {
-	{ H4_RECV_ACL,   .recv = hci_recv_frame },
-	{ H4_RECV_SCO,   .recv = hci_recv_frame },
-	{ H4_RECV_EVENT, .recv = hci_recv_frame },
-};
-
-/* Recv data */
-static int ath_recv(struct hci_uart *hu, const void *data, int count)
-{
-	struct ath_struct *ath = hu->priv;
-
-	ath->rx_skb = h4_recv_buf(hu->hdev, ath->rx_skb, data, count,
-				  ath_recv_pkts, ARRAY_SIZE(ath_recv_pkts));
-	if (IS_ERR(ath->rx_skb)) {
-		int err = PTR_ERR(ath->rx_skb);
-		BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err);
-		return err;
-	}
-
-	return count;
-}
-
 static const struct hci_uart_proto athp = {
 	.id		= HCI_UART_ATH3K,
 	.name		= "ATH3K",
 	.open		= ath_open,
 	.close		= ath_close,
+	.flush		= ath_flush,
+	.setup		= ath_setup,
 	.recv		= ath_recv,
 	.enqueue	= ath_enqueue,
 	.dequeue	= ath_dequeue,
-	.flush		= ath_flush,
 };
 
 int __init ath_init(void)
diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 38026650c038..67d00fbc2e0e 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -85,6 +85,7 @@ struct at86rf230_local {
 	struct ieee802154_hw *hw;
 	struct at86rf2xx_chip_data *data;
 	struct regmap *regmap;
+	int slp_tr;
 
 	struct completion state_complete;
 	struct at86rf230_state_change state;
@@ -95,163 +96,164 @@ struct at86rf230_local {
 	unsigned long cal_timeout;
 	s8 max_frame_retries;
 	bool is_tx;
+	bool is_tx_from_off;
 	u8 tx_retry;
 	struct sk_buff *tx_skb;
 	struct at86rf230_state_change tx;
 };
 
-#define	RG_TRX_STATUS	(0x01)
-#define	SR_TRX_STATUS		0x01, 0x1f, 0
-#define	SR_RESERVED_01_3	0x01, 0x20, 5
-#define	SR_CCA_STATUS		0x01, 0x40, 6
-#define	SR_CCA_DONE		0x01, 0x80, 7
-#define	RG_TRX_STATE	(0x02)
-#define	SR_TRX_CMD		0x02, 0x1f, 0
-#define	SR_TRAC_STATUS		0x02, 0xe0, 5
-#define	RG_TRX_CTRL_0	(0x03)
-#define	SR_CLKM_CTRL		0x03, 0x07, 0
-#define	SR_CLKM_SHA_SEL		0x03, 0x08, 3
-#define	SR_PAD_IO_CLKM		0x03, 0x30, 4
-#define	SR_PAD_IO		0x03, 0xc0, 6
-#define	RG_TRX_CTRL_1	(0x04)
-#define	SR_IRQ_POLARITY		0x04, 0x01, 0
-#define	SR_IRQ_MASK_MODE	0x04, 0x02, 1
-#define	SR_SPI_CMD_MODE		0x04, 0x0c, 2
-#define	SR_RX_BL_CTRL		0x04, 0x10, 4
-#define	SR_TX_AUTO_CRC_ON	0x04, 0x20, 5
-#define	SR_IRQ_2_EXT_EN		0x04, 0x40, 6
-#define	SR_PA_EXT_EN		0x04, 0x80, 7
-#define	RG_PHY_TX_PWR	(0x05)
-#define	SR_TX_PWR		0x05, 0x0f, 0
-#define	SR_PA_LT		0x05, 0x30, 4
-#define	SR_PA_BUF_LT		0x05, 0xc0, 6
-#define	RG_PHY_RSSI	(0x06)
-#define	SR_RSSI			0x06, 0x1f, 0
-#define	SR_RND_VALUE		0x06, 0x60, 5
-#define	SR_RX_CRC_VALID		0x06, 0x80, 7
-#define	RG_PHY_ED_LEVEL	(0x07)
-#define	SR_ED_LEVEL		0x07, 0xff, 0
-#define	RG_PHY_CC_CCA	(0x08)
-#define	SR_CHANNEL		0x08, 0x1f, 0
-#define	SR_CCA_MODE		0x08, 0x60, 5
-#define	SR_CCA_REQUEST		0x08, 0x80, 7
-#define	RG_CCA_THRES	(0x09)
-#define	SR_CCA_ED_THRES		0x09, 0x0f, 0
-#define	SR_RESERVED_09_1	0x09, 0xf0, 4
-#define	RG_RX_CTRL	(0x0a)
-#define	SR_PDT_THRES		0x0a, 0x0f, 0
-#define	SR_RESERVED_0a_1	0x0a, 0xf0, 4
-#define	RG_SFD_VALUE	(0x0b)
-#define	SR_SFD_VALUE		0x0b, 0xff, 0
-#define	RG_TRX_CTRL_2	(0x0c)
-#define	SR_OQPSK_DATA_RATE	0x0c, 0x03, 0
-#define	SR_SUB_MODE		0x0c, 0x04, 2
-#define	SR_BPSK_QPSK		0x0c, 0x08, 3
-#define	SR_OQPSK_SUB1_RC_EN	0x0c, 0x10, 4
-#define	SR_RESERVED_0c_5	0x0c, 0x60, 5
-#define	SR_RX_SAFE_MODE		0x0c, 0x80, 7
-#define	RG_ANT_DIV	(0x0d)
-#define	SR_ANT_CTRL		0x0d, 0x03, 0
-#define	SR_ANT_EXT_SW_EN	0x0d, 0x04, 2
-#define	SR_ANT_DIV_EN		0x0d, 0x08, 3
-#define	SR_RESERVED_0d_2	0x0d, 0x70, 4
-#define	SR_ANT_SEL		0x0d, 0x80, 7
-#define	RG_IRQ_MASK	(0x0e)
-#define	SR_IRQ_MASK		0x0e, 0xff, 0
-#define	RG_IRQ_STATUS	(0x0f)
-#define	SR_IRQ_0_PLL_LOCK	0x0f, 0x01, 0
-#define	SR_IRQ_1_PLL_UNLOCK	0x0f, 0x02, 1
-#define	SR_IRQ_2_RX_START	0x0f, 0x04, 2
-#define	SR_IRQ_3_TRX_END	0x0f, 0x08, 3
-#define	SR_IRQ_4_CCA_ED_DONE	0x0f, 0x10, 4
-#define	SR_IRQ_5_AMI		0x0f, 0x20, 5
-#define	SR_IRQ_6_TRX_UR		0x0f, 0x40, 6
-#define	SR_IRQ_7_BAT_LOW	0x0f, 0x80, 7
-#define	RG_VREG_CTRL	(0x10)
-#define	SR_RESERVED_10_6	0x10, 0x03, 0
-#define	SR_DVDD_OK		0x10, 0x04, 2
-#define	SR_DVREG_EXT		0x10, 0x08, 3
-#define	SR_RESERVED_10_3	0x10, 0x30, 4
-#define	SR_AVDD_OK		0x10, 0x40, 6
-#define	SR_AVREG_EXT		0x10, 0x80, 7
-#define	RG_BATMON	(0x11)
-#define	SR_BATMON_VTH		0x11, 0x0f, 0
-#define	SR_BATMON_HR		0x11, 0x10, 4
-#define	SR_BATMON_OK		0x11, 0x20, 5
-#define	SR_RESERVED_11_1	0x11, 0xc0, 6
-#define	RG_XOSC_CTRL	(0x12)
-#define	SR_XTAL_TRIM		0x12, 0x0f, 0
-#define	SR_XTAL_MODE		0x12, 0xf0, 4
-#define	RG_RX_SYN	(0x15)
-#define	SR_RX_PDT_LEVEL		0x15, 0x0f, 0
-#define	SR_RESERVED_15_2	0x15, 0x70, 4
-#define	SR_RX_PDT_DIS		0x15, 0x80, 7
-#define	RG_XAH_CTRL_1	(0x17)
-#define	SR_RESERVED_17_8	0x17, 0x01, 0
-#define	SR_AACK_PROM_MODE	0x17, 0x02, 1
-#define	SR_AACK_ACK_TIME	0x17, 0x04, 2
-#define	SR_RESERVED_17_5	0x17, 0x08, 3
-#define	SR_AACK_UPLD_RES_FT	0x17, 0x10, 4
-#define	SR_AACK_FLTR_RES_FT	0x17, 0x20, 5
-#define	SR_CSMA_LBT_MODE	0x17, 0x40, 6
-#define	SR_RESERVED_17_1	0x17, 0x80, 7
-#define	RG_FTN_CTRL	(0x18)
-#define	SR_RESERVED_18_2	0x18, 0x7f, 0
-#define	SR_FTN_START		0x18, 0x80, 7
-#define	RG_PLL_CF	(0x1a)
-#define	SR_RESERVED_1a_2	0x1a, 0x7f, 0
-#define	SR_PLL_CF_START		0x1a, 0x80, 7
-#define	RG_PLL_DCU	(0x1b)
-#define	SR_RESERVED_1b_3	0x1b, 0x3f, 0
-#define	SR_RESERVED_1b_2	0x1b, 0x40, 6
-#define	SR_PLL_DCU_START	0x1b, 0x80, 7
-#define	RG_PART_NUM	(0x1c)
-#define	SR_PART_NUM		0x1c, 0xff, 0
-#define	RG_VERSION_NUM	(0x1d)
-#define	SR_VERSION_NUM		0x1d, 0xff, 0
-#define	RG_MAN_ID_0	(0x1e)
-#define	SR_MAN_ID_0		0x1e, 0xff, 0
-#define	RG_MAN_ID_1	(0x1f)
-#define	SR_MAN_ID_1		0x1f, 0xff, 0
-#define	RG_SHORT_ADDR_0	(0x20)
-#define	SR_SHORT_ADDR_0		0x20, 0xff, 0
-#define	RG_SHORT_ADDR_1	(0x21)
-#define	SR_SHORT_ADDR_1		0x21, 0xff, 0
-#define	RG_PAN_ID_0	(0x22)
-#define	SR_PAN_ID_0		0x22, 0xff, 0
-#define	RG_PAN_ID_1	(0x23)
-#define	SR_PAN_ID_1		0x23, 0xff, 0
-#define	RG_IEEE_ADDR_0	(0x24)
-#define	SR_IEEE_ADDR_0		0x24, 0xff, 0
-#define	RG_IEEE_ADDR_1	(0x25)
-#define	SR_IEEE_ADDR_1		0x25, 0xff, 0
-#define	RG_IEEE_ADDR_2	(0x26)
-#define	SR_IEEE_ADDR_2		0x26, 0xff, 0
-#define	RG_IEEE_ADDR_3	(0x27)
-#define	SR_IEEE_ADDR_3		0x27, 0xff, 0
-#define	RG_IEEE_ADDR_4	(0x28)
-#define	SR_IEEE_ADDR_4		0x28, 0xff, 0
-#define	RG_IEEE_ADDR_5	(0x29)
-#define	SR_IEEE_ADDR_5		0x29, 0xff, 0
-#define	RG_IEEE_ADDR_6	(0x2a)
-#define	SR_IEEE_ADDR_6		0x2a, 0xff, 0
-#define	RG_IEEE_ADDR_7	(0x2b)
-#define	SR_IEEE_ADDR_7		0x2b, 0xff, 0
-#define	RG_XAH_CTRL_0	(0x2c)
-#define	SR_SLOTTED_OPERATION	0x2c, 0x01, 0
-#define	SR_MAX_CSMA_RETRIES	0x2c, 0x0e, 1
-#define	SR_MAX_FRAME_RETRIES	0x2c, 0xf0, 4
-#define	RG_CSMA_SEED_0	(0x2d)
-#define	SR_CSMA_SEED_0		0x2d, 0xff, 0
-#define	RG_CSMA_SEED_1	(0x2e)
-#define	SR_CSMA_SEED_1		0x2e, 0x07, 0
-#define	SR_AACK_I_AM_COORD	0x2e, 0x08, 3
-#define	SR_AACK_DIS_ACK		0x2e, 0x10, 4
-#define	SR_AACK_SET_PD		0x2e, 0x20, 5
-#define	SR_AACK_FVN_MODE	0x2e, 0xc0, 6
-#define	RG_CSMA_BE	(0x2f)
-#define	SR_MIN_BE		0x2f, 0x0f, 0
-#define	SR_MAX_BE		0x2f, 0xf0, 4
+#define RG_TRX_STATUS	(0x01)
+#define SR_TRX_STATUS		0x01, 0x1f, 0
+#define SR_RESERVED_01_3	0x01, 0x20, 5
+#define SR_CCA_STATUS		0x01, 0x40, 6
+#define SR_CCA_DONE		0x01, 0x80, 7
+#define RG_TRX_STATE	(0x02)
+#define SR_TRX_CMD		0x02, 0x1f, 0
+#define SR_TRAC_STATUS		0x02, 0xe0, 5
+#define RG_TRX_CTRL_0	(0x03)
+#define SR_CLKM_CTRL		0x03, 0x07, 0
+#define SR_CLKM_SHA_SEL		0x03, 0x08, 3
+#define SR_PAD_IO_CLKM		0x03, 0x30, 4
+#define SR_PAD_IO		0x03, 0xc0, 6
+#define RG_TRX_CTRL_1	(0x04)
+#define SR_IRQ_POLARITY		0x04, 0x01, 0
+#define SR_IRQ_MASK_MODE	0x04, 0x02, 1
+#define SR_SPI_CMD_MODE		0x04, 0x0c, 2
+#define SR_RX_BL_CTRL		0x04, 0x10, 4
+#define SR_TX_AUTO_CRC_ON	0x04, 0x20, 5
+#define SR_IRQ_2_EXT_EN		0x04, 0x40, 6
+#define SR_PA_EXT_EN		0x04, 0x80, 7
+#define RG_PHY_TX_PWR	(0x05)
+#define SR_TX_PWR		0x05, 0x0f, 0
+#define SR_PA_LT		0x05, 0x30, 4
+#define SR_PA_BUF_LT		0x05, 0xc0, 6
+#define RG_PHY_RSSI	(0x06)
+#define SR_RSSI			0x06, 0x1f, 0
+#define SR_RND_VALUE		0x06, 0x60, 5
+#define SR_RX_CRC_VALID		0x06, 0x80, 7
+#define RG_PHY_ED_LEVEL	(0x07)
+#define SR_ED_LEVEL		0x07, 0xff, 0
+#define RG_PHY_CC_CCA	(0x08)
+#define SR_CHANNEL		0x08, 0x1f, 0
+#define SR_CCA_MODE		0x08, 0x60, 5
+#define SR_CCA_REQUEST		0x08, 0x80, 7
+#define RG_CCA_THRES	(0x09)
+#define SR_CCA_ED_THRES		0x09, 0x0f, 0
+#define SR_RESERVED_09_1	0x09, 0xf0, 4
+#define RG_RX_CTRL	(0x0a)
+#define SR_PDT_THRES		0x0a, 0x0f, 0
+#define SR_RESERVED_0a_1	0x0a, 0xf0, 4
+#define RG_SFD_VALUE	(0x0b)
+#define SR_SFD_VALUE		0x0b, 0xff, 0
+#define RG_TRX_CTRL_2	(0x0c)
+#define SR_OQPSK_DATA_RATE	0x0c, 0x03, 0
+#define SR_SUB_MODE		0x0c, 0x04, 2
+#define SR_BPSK_QPSK		0x0c, 0x08, 3
+#define SR_OQPSK_SUB1_RC_EN	0x0c, 0x10, 4
+#define SR_RESERVED_0c_5	0x0c, 0x60, 5
+#define SR_RX_SAFE_MODE		0x0c, 0x80, 7
+#define RG_ANT_DIV	(0x0d)
+#define SR_ANT_CTRL		0x0d, 0x03, 0
+#define SR_ANT_EXT_SW_EN	0x0d, 0x04, 2
+#define SR_ANT_DIV_EN		0x0d, 0x08, 3
+#define SR_RESERVED_0d_2	0x0d, 0x70, 4
+#define SR_ANT_SEL		0x0d, 0x80, 7
+#define RG_IRQ_MASK	(0x0e)
+#define SR_IRQ_MASK		0x0e, 0xff, 0
+#define RG_IRQ_STATUS	(0x0f)
+#define SR_IRQ_0_PLL_LOCK	0x0f, 0x01, 0
+#define SR_IRQ_1_PLL_UNLOCK	0x0f, 0x02, 1
+#define SR_IRQ_2_RX_START	0x0f, 0x04, 2
+#define SR_IRQ_3_TRX_END	0x0f, 0x08, 3
+#define SR_IRQ_4_CCA_ED_DONE	0x0f, 0x10, 4
+#define SR_IRQ_5_AMI		0x0f, 0x20, 5
+#define SR_IRQ_6_TRX_UR		0x0f, 0x40, 6
+#define SR_IRQ_7_BAT_LOW	0x0f, 0x80, 7
+#define RG_VREG_CTRL	(0x10)
+#define SR_RESERVED_10_6	0x10, 0x03, 0
+#define SR_DVDD_OK		0x10, 0x04, 2
+#define SR_DVREG_EXT		0x10, 0x08, 3
+#define SR_RESERVED_10_3	0x10, 0x30, 4
+#define SR_AVDD_OK		0x10, 0x40, 6
+#define SR_AVREG_EXT		0x10, 0x80, 7
+#define RG_BATMON	(0x11)
+#define SR_BATMON_VTH		0x11, 0x0f, 0
+#define SR_BATMON_HR		0x11, 0x10, 4
+#define SR_BATMON_OK		0x11, 0x20, 5
+#define SR_RESERVED_11_1	0x11, 0xc0, 6
+#define RG_XOSC_CTRL	(0x12)
+#define SR_XTAL_TRIM		0x12, 0x0f, 0
+#define SR_XTAL_MODE		0x12, 0xf0, 4
+#define RG_RX_SYN	(0x15)
+#define SR_RX_PDT_LEVEL		0x15, 0x0f, 0
+#define SR_RESERVED_15_2	0x15, 0x70, 4
+#define SR_RX_PDT_DIS		0x15, 0x80, 7
+#define RG_XAH_CTRL_1	(0x17)
+#define SR_RESERVED_17_8	0x17, 0x01, 0
+#define SR_AACK_PROM_MODE	0x17, 0x02, 1
+#define SR_AACK_ACK_TIME	0x17, 0x04, 2
+#define SR_RESERVED_17_5	0x17, 0x08, 3
+#define SR_AACK_UPLD_RES_FT	0x17, 0x10, 4
+#define SR_AACK_FLTR_RES_FT	0x17, 0x20, 5
+#define SR_CSMA_LBT_MODE	0x17, 0x40, 6
+#define SR_RESERVED_17_1	0x17, 0x80, 7
+#define RG_FTN_CTRL	(0x18)
+#define SR_RESERVED_18_2	0x18, 0x7f, 0
+#define SR_FTN_START		0x18, 0x80, 7
+#define RG_PLL_CF	(0x1a)
+#define SR_RESERVED_1a_2	0x1a, 0x7f, 0
+#define SR_PLL_CF_START		0x1a, 0x80, 7
+#define RG_PLL_DCU	(0x1b)
+#define SR_RESERVED_1b_3	0x1b, 0x3f, 0
+#define SR_RESERVED_1b_2	0x1b, 0x40, 6
+#define SR_PLL_DCU_START	0x1b, 0x80, 7
+#define RG_PART_NUM	(0x1c)
+#define SR_PART_NUM		0x1c, 0xff, 0
+#define RG_VERSION_NUM	(0x1d)
+#define SR_VERSION_NUM		0x1d, 0xff, 0
+#define RG_MAN_ID_0	(0x1e)
+#define SR_MAN_ID_0		0x1e, 0xff, 0
+#define RG_MAN_ID_1	(0x1f)
+#define SR_MAN_ID_1		0x1f, 0xff, 0
+#define RG_SHORT_ADDR_0	(0x20)
+#define SR_SHORT_ADDR_0		0x20, 0xff, 0
+#define RG_SHORT_ADDR_1	(0x21)
+#define SR_SHORT_ADDR_1		0x21, 0xff, 0
+#define RG_PAN_ID_0	(0x22)
+#define SR_PAN_ID_0		0x22, 0xff, 0
+#define RG_PAN_ID_1	(0x23)
+#define SR_PAN_ID_1		0x23, 0xff, 0
+#define RG_IEEE_ADDR_0	(0x24)
+#define SR_IEEE_ADDR_0		0x24, 0xff, 0
+#define RG_IEEE_ADDR_1	(0x25)
+#define SR_IEEE_ADDR_1		0x25, 0xff, 0
+#define RG_IEEE_ADDR_2	(0x26)
+#define SR_IEEE_ADDR_2		0x26, 0xff, 0
+#define RG_IEEE_ADDR_3	(0x27)
+#define SR_IEEE_ADDR_3		0x27, 0xff, 0
+#define RG_IEEE_ADDR_4	(0x28)
+#define SR_IEEE_ADDR_4		0x28, 0xff, 0
+#define RG_IEEE_ADDR_5	(0x29)
+#define SR_IEEE_ADDR_5		0x29, 0xff, 0
+#define RG_IEEE_ADDR_6	(0x2a)
+#define SR_IEEE_ADDR_6		0x2a, 0xff, 0
+#define RG_IEEE_ADDR_7	(0x2b)
+#define SR_IEEE_ADDR_7		0x2b, 0xff, 0
+#define RG_XAH_CTRL_0	(0x2c)
+#define SR_SLOTTED_OPERATION	0x2c, 0x01, 0
+#define SR_MAX_CSMA_RETRIES	0x2c, 0x0e, 1
+#define SR_MAX_FRAME_RETRIES	0x2c, 0xf0, 4
+#define RG_CSMA_SEED_0	(0x2d)
+#define SR_CSMA_SEED_0		0x2d, 0xff, 0
+#define RG_CSMA_SEED_1	(0x2e)
+#define SR_CSMA_SEED_1		0x2e, 0x07, 0
+#define SR_AACK_I_AM_COORD	0x2e, 0x08, 3
+#define SR_AACK_DIS_ACK		0x2e, 0x10, 4
+#define SR_AACK_SET_PD		0x2e, 0x20, 5
+#define SR_AACK_FVN_MODE	0x2e, 0xc0, 6
+#define RG_CSMA_BE	(0x2f)
+#define SR_MIN_BE		0x2f, 0x0f, 0
+#define SR_MAX_BE		0x2f, 0xf0, 4
 
 #define CMD_REG		0x80
 #define CMD_REG_MASK	0x3f
@@ -292,6 +294,8 @@ struct at86rf230_local {
 #define STATE_BUSY_RX_AACK_NOCLK 0x1E
 #define STATE_TRANSITION_IN_PROGRESS 0x1F
 
+#define TRX_STATE_MASK		(0x1F)
+
 #define AT86RF2XX_NUMREGS 0x3F
 
 static void
@@ -336,6 +340,14 @@ at86rf230_write_subreg(struct at86rf230_local *lp,
 	return regmap_update_bits(lp->regmap, addr, mask, data << shift);
 }
 
+static inline void
+at86rf230_slp_tr_rising_edge(struct at86rf230_local *lp)
+{
+	gpio_set_value(lp->slp_tr, 1);
+	udelay(1);
+	gpio_set_value(lp->slp_tr, 0);
+}
+
 static bool
 at86rf230_reg_writeable(struct device *dev, unsigned int reg)
 {
@@ -509,7 +521,7 @@ at86rf230_async_state_assert(void *context)
 	struct at86rf230_state_change *ctx = context;
 	struct at86rf230_local *lp = ctx->lp;
 	const u8 *buf = ctx->buf;
-	const u8 trx_state = buf[1] & 0x1f;
+	const u8 trx_state = buf[1] & TRX_STATE_MASK;
 
 	/* Assert state change */
 	if (trx_state != ctx->to_state) {
@@ -609,11 +621,17 @@ at86rf230_async_state_delay(void *context)
 		switch (ctx->to_state) {
 		case STATE_RX_AACK_ON:
 			tim = ktime_set(0, c->t_off_to_aack * NSEC_PER_USEC);
+			/* state change from TRX_OFF to RX_AACK_ON to do a
+			 * calibration, we need to reset the timeout for the
+			 * next one.
+			 */
+			lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT;
 			goto change;
+		case STATE_TX_ARET_ON:
 		case STATE_TX_ON:
 			tim = ktime_set(0, c->t_off_to_tx_on * NSEC_PER_USEC);
-			/* state change from TRX_OFF to TX_ON to do a
-			 * calibration, we need to reset the timeout for the
+			/* state change from TRX_OFF to TX_ON or ARET_ON to do
+			 * a calibration, we need to reset the timeout for the
 			 * next one.
 			 */
 			lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT;
@@ -667,7 +685,7 @@ at86rf230_async_state_change_start(void *context)
 	struct at86rf230_state_change *ctx = context;
 	struct at86rf230_local *lp = ctx->lp;
 	u8 *buf = ctx->buf;
-	const u8 trx_state = buf[1] & 0x1f;
+	const u8 trx_state = buf[1] & TRX_STATE_MASK;
 	int rc;
 
 	/* Check for "possible" STATE_TRANSITION_IN_PROGRESS */
@@ -773,16 +791,6 @@ at86rf230_tx_on(void *context)
 }
 
 static void
-at86rf230_tx_trac_error(void *context)
-{
-	struct at86rf230_state_change *ctx = context;
-	struct at86rf230_local *lp = ctx->lp;
-
-	at86rf230_async_state_change(lp, ctx, STATE_TX_ON,
-				     at86rf230_tx_on, true);
-}
-
-static void
 at86rf230_tx_trac_check(void *context)
 {
 	struct at86rf230_state_change *ctx = context;
@@ -791,12 +799,12 @@ at86rf230_tx_trac_check(void *context)
 	const u8 trac = (buf[1] & 0xe0) >> 5;
 
 	/* If trac status is different than zero we need to do a state change
-	 * to STATE_FORCE_TRX_OFF then STATE_TX_ON to recover the transceiver
-	 * state to TX_ON.
+	 * to STATE_FORCE_TRX_OFF then STATE_RX_AACK_ON to recover the
+	 * transceiver.
 	 */
 	if (trac)
 		at86rf230_async_state_change(lp, ctx, STATE_FORCE_TRX_OFF,
-					     at86rf230_tx_trac_error, true);
+					     at86rf230_tx_on, true);
 	else
 		at86rf230_tx_on(context);
 }
@@ -941,13 +949,18 @@ at86rf230_write_frame_complete(void *context)
 	u8 *buf = ctx->buf;
 	int rc;
 
-	buf[0] = (RG_TRX_STATE & CMD_REG_MASK) | CMD_REG | CMD_WRITE;
-	buf[1] = STATE_BUSY_TX;
 	ctx->trx.len = 2;
-	ctx->msg.complete = NULL;
-	rc = spi_async(lp->spi, &ctx->msg);
-	if (rc)
-		at86rf230_async_error(lp, ctx, rc);
+
+	if (gpio_is_valid(lp->slp_tr)) {
+		at86rf230_slp_tr_rising_edge(lp);
+	} else {
+		buf[0] = (RG_TRX_STATE & CMD_REG_MASK) | CMD_REG | CMD_WRITE;
+		buf[1] = STATE_BUSY_TX;
+		ctx->msg.complete = NULL;
+		rc = spi_async(lp->spi, &ctx->msg);
+		if (rc)
+			at86rf230_async_error(lp, ctx, rc);
+	}
 }
 
 static void
@@ -993,12 +1006,21 @@ at86rf230_xmit_start(void *context)
 	 * are in STATE_TX_ON. The pfad differs here, so we change
 	 * the complete handler.
 	 */
-	if (lp->tx_aret)
-		at86rf230_async_state_change(lp, ctx, STATE_TX_ON,
-					     at86rf230_xmit_tx_on, false);
-	else
+	if (lp->tx_aret) {
+		if (lp->is_tx_from_off) {
+			lp->is_tx_from_off = false;
+			at86rf230_async_state_change(lp, ctx, STATE_TX_ARET_ON,
+						     at86rf230_xmit_tx_on,
+						     false);
+		} else {
+			at86rf230_async_state_change(lp, ctx, STATE_TX_ON,
+						     at86rf230_xmit_tx_on,
+						     false);
+		}
+	} else {
 		at86rf230_async_state_change(lp, ctx, STATE_TX_ON,
 					     at86rf230_write_frame, false);
+	}
 }
 
 static int
@@ -1017,11 +1039,13 @@ at86rf230_xmit(struct ieee802154_hw *hw, struct sk_buff *skb)
 	 * to TX_ON, the lp->cal_timeout should be reinit by state_delay
 	 * function then to start in the next 5 minutes.
 	 */
-	if (time_is_before_jiffies(lp->cal_timeout))
+	if (time_is_before_jiffies(lp->cal_timeout)) {
+		lp->is_tx_from_off = true;
 		at86rf230_async_state_change(lp, ctx, STATE_TRX_OFF,
 					     at86rf230_xmit_start, false);
-	else
+	} else {
 		at86rf230_xmit_start(ctx);
+	}
 
 	return 0;
 }
@@ -1037,9 +1061,6 @@ at86rf230_ed(struct ieee802154_hw *hw, u8 *level)
 static int
 at86rf230_start(struct ieee802154_hw *hw)
 {
-	struct at86rf230_local *lp = hw->priv;
-
-	lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT;
 	return at86rf230_sync_state_change(hw->priv, STATE_RX_AACK_ON);
 }
 
@@ -1673,6 +1694,7 @@ static int at86rf230_probe(struct spi_device *spi)
 	lp = hw->priv;
 	lp->hw = hw;
 	lp->spi = spi;
+	lp->slp_tr = slp_tr;
 	hw->parent = &spi->dev;
 	hw->vif_data_size = sizeof(*lp);
 	ieee802154_random_extended_addr(&hw->phy->perm_extended_addr);