Merge tag 'qcom-arm64-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

Qualcomm ARM64 DeviceTree updates for v6.5

This introduces the RDP442 and RDP433 reference devices on IPQ5332 and
IPQ9574, respectively. RDP418, RDP433, RDP449 and RDP453 on the IPQ9574
are added. On MSM8939 the Square T2 board and the Sony Xperia M4 Aqua is
added. Support for Acer Apire 1, built on the Snapdragon 7c platform is
introduced. Fxtec Pro1X on SM6115 is added.  Lastly long floating
support for SC8180X and the Lenovo Flex 5G, and the Primus reference
device, has been added.

On IPQ5332 and IPQ6018 QFPROM support is introduced, and as described
above the RDP442 board on the prior. Download mode support and various
reserved-memory regions are also introduced on IPQ6018.
IPQ8074 gains another SPI controller.

On IPQ9574 CPU frequency scaling, low speed busses, RNG, Watchdog,
qfprom, SMEM and RPM are introduced. As are support for four new board,
mentioned above.

MSM8916 gains a range of structural improvements, to better suite the
various boards supported. Regulator constraints are corrected and their
states are adjusted to match reality (e.g. always-on regulators marked
as always-on). BQ Aquaris X5 gains support for front flash LED.

As mentioned above, MSM8939 support is introduced with support for
boards from Sony and Square.

MSM8953 gains DMA support in I2C masters.

MSM8996-based Sony Xperia boards gains description of their RGB
notification LED.

On SA8775P support for UFS, USB, GPU clock and iommu controllers, PMU,
AOSS, watchdog and missing low-speed controllers are added. On the Ride
platform UFS, USB and an i2c bus are enabled.

iommu properties are added to QSPI on both SC7180 and SC7280. LPASS
clocks are adjusted and MDP node cleaned up slightly, on SC7180. As
mentioned above, support for Acer Aspire 1 is introduced.

Long lingering patches introducing SC8180X, the Lenovo Flex 5G and the
Primus reference device has been merged.

On SC8280XP ethernet is added and enabled on the automotive ride
platform. An SDC controller is introduced and enabled on the SC8280XP
CRD. On the Lenovo Thinkpad X13s and the CRD reference device the USB
SuperSpeed phy is added to the Type-C graph, to enable support for
orientation switching.

Fairphone 3 gains support for its notification LED.

On SDM845 the iommu stream for QSPI is defined, SHIFT SHIFT6mq gains
support for flash LED and the RB3 (DB845c) board gains support for
bonded/dual DSI-mode, to allow 4k output.

On SM6115 CPU idle-states, crypto engine support and SuperSpeed USB PHY
are introduced. As mentioned above Fxtec Pro1X is introduced. On the
QRB4210 Robotics Platform RB2 USB, Audio and Compute DSPs, display,
CAN-bus and GPIO LEDs are introduced, fixed regulators are described and
the SD-card description is corrected.

Support for crypto engine is added to SM8150, while Sony Xperia 1 and 5
gains SD-card support, camera regulators and GPIO line names sorted out.

SM8250 also gets support for crypto engine, and Sony Xperia 1 II and 5
II gains support for hardware video accelerator.

Crypto engine is introduced for SM8350 as well. The HDK gets the USB
Type-C graph described for Superspeed orientation switching and
DisplayPort output.

On SM8450 video clock controller and crypto engine are added, missing
opp levels are introduced and the USB Type-C graph is defined for
orientation switching and altmode.

SM8550 gains GPU and video clock controllers and missing opp levels are
added. The WCD9385 audio codec is added for the SM8550 MTP and on the
QRD PCIe, USB, audio display and flash LED are added.

* tag 'qcom-arm64-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (195 commits)
  arm64: dts: qcom: sc8180x: Introduce Lenovo Flex 5G
  arm64: dts: qcom: sc8180x: Introduce Primus
  arm64: dts: qcom: sc8180x: Add pmics
  arm64: dts: qcom: sc8180x: Add display and gpu nodes
  arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes
  arm64: dts: qcom: sc8180x: Add PCIe instances
  arm64: dts: qcom: sc8180x: Add QUPs
  arm64: dts: qcom: sc8180x: Add thermal zones
  arm64: dts: qcom: sc8180x: Add interconnects and lmh
  arm64: dts: qcom: Introduce the SC8180x platform
  arm64: dts: qcom: msm8916: Move aliases to boards
  arm64: dts: qcom: pm8916: Rename &wcd_codec -> &pm8916_codec
  arm64: dts: qcom: msm8916/39: Clean up MDSS labels
  arm64: dts: qcom: msm8916/39: Use consistent name for I2C/SPI pinctrl
  arm64: dts: qcom: msm8916/39: Rename &blsp1_uartN -> &blsp_uartN
  arm64: dts: qcom: msm8916: Rename &msmgpio -> &tlmm
  arm64: dts: qcom: qrb4210-rb2: Enable USB node
  arm64: dts: qcom: sm6115: Add USB SS qmp phy node
  arm64: dts: qcom: ipq5332: add support for the RDP442 variant
  dt-bindings: arm: qcom: document MI01.3 board based on IPQ5332 family
  ...

Link: https://lore.kernel.org/r/20230611004944.2481596-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

5 files changed, 178 insertions, 14 deletions

diff --git a/include/dt-bindings/clock/qcom,sm8450-gpucc.h b/include/dt-bindings/clock/qcom,sm8450-gpucc.h
new file mode 100644
index 000000000000..712b171503d6
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,sm8450-gpucc.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_GPU_CC_SM8450_H
+#define _DT_BINDINGS_CLK_QCOM_GPU_CC_SM8450_H
+
+/* Clocks */
+#define GPU_CC_AHB_CLK				0
+#define GPU_CC_CRC_AHB_CLK			1
+#define GPU_CC_CX_APB_CLK			2
+#define GPU_CC_CX_FF_CLK			3
+#define GPU_CC_CX_GMU_CLK			4
+#define GPU_CC_CX_SNOC_DVM_CLK			5
+#define GPU_CC_CXO_AON_CLK			6
+#define GPU_CC_CXO_CLK				7
+#define GPU_CC_DEMET_CLK			8
+#define GPU_CC_DEMET_DIV_CLK_SRC		9
+#define GPU_CC_FF_CLK_SRC			10
+#define GPU_CC_FREQ_MEASURE_CLK			11
+#define GPU_CC_GMU_CLK_SRC			12
+#define GPU_CC_GX_FF_CLK			13
+#define GPU_CC_GX_GFX3D_CLK			14
+#define GPU_CC_GX_GFX3D_RDVM_CLK		15
+#define GPU_CC_GX_GMU_CLK			16
+#define GPU_CC_GX_VSENSE_CLK			17
+#define GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK		18
+#define GPU_CC_HUB_AHB_DIV_CLK_SRC		19
+#define GPU_CC_HUB_AON_CLK			20
+#define GPU_CC_HUB_CLK_SRC			21
+#define GPU_CC_HUB_CX_INT_CLK			22
+#define GPU_CC_HUB_CX_INT_DIV_CLK_SRC		23
+#define GPU_CC_MEMNOC_GFX_CLK			24
+#define GPU_CC_MND1X_0_GFX3D_CLK		25
+#define GPU_CC_MND1X_1_GFX3D_CLK		26
+#define GPU_CC_PLL0				27
+#define GPU_CC_PLL1				28
+#define GPU_CC_SLEEP_CLK			29
+#define GPU_CC_XO_CLK_SRC			30
+#define GPU_CC_XO_DIV_CLK_SRC			31
+
+/* GDSCs */
+#define GPU_GX_GDSC				0
+#define GPU_CX_GDSC				1
+
+#endif
diff --git a/include/dt-bindings/clock/qcom,sm8450-videocc.h b/include/dt-bindings/clock/qcom,sm8450-videocc.h
new file mode 100644
index 000000000000..9d795adfe4eb
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,sm8450-videocc.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8450_H
+#define _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8450_H
+
+/* VIDEO_CC clocks */
+#define VIDEO_CC_MVS0_CLK					0
+#define VIDEO_CC_MVS0_CLK_SRC					1
+#define VIDEO_CC_MVS0_DIV_CLK_SRC				2
+#define VIDEO_CC_MVS0C_CLK					3
+#define VIDEO_CC_MVS0C_DIV2_DIV_CLK_SRC				4
+#define VIDEO_CC_MVS1_CLK					5
+#define VIDEO_CC_MVS1_CLK_SRC					6
+#define VIDEO_CC_MVS1_DIV_CLK_SRC				7
+#define VIDEO_CC_MVS1C_CLK					8
+#define VIDEO_CC_MVS1C_DIV2_DIV_CLK_SRC				9
+#define VIDEO_CC_PLL0						10
+#define VIDEO_CC_PLL1						11
+
+/* VIDEO_CC power domains */
+#define VIDEO_CC_MVS0C_GDSC					0
+#define VIDEO_CC_MVS0_GDSC					1
+#define VIDEO_CC_MVS1C_GDSC					2
+#define VIDEO_CC_MVS1_GDSC					3
+
+/* VIDEO_CC resets */
+#define CVP_VIDEO_CC_INTERFACE_BCR				0
+#define CVP_VIDEO_CC_MVS0_BCR					1
+#define CVP_VIDEO_CC_MVS0C_BCR					2
+#define CVP_VIDEO_CC_MVS1_BCR					3
+#define CVP_VIDEO_CC_MVS1C_BCR					4
+#define VIDEO_CC_MVS0C_CLK_ARES					5
+#define VIDEO_CC_MVS1C_CLK_ARES					6
+
+#endif
diff --git a/include/dt-bindings/clock/qcom,sm8550-gpucc.h b/include/dt-bindings/clock/qcom,sm8550-gpucc.h
new file mode 100644
index 000000000000..a6760547a3ab
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,sm8550-gpucc.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_GPU_CC_SM8550_H
+#define _DT_BINDINGS_CLK_QCOM_GPU_CC_SM8550_H
+
+/* GPU_CC clocks */
+#define GPU_CC_AHB_CLK						0
+#define GPU_CC_CRC_AHB_CLK					1
+#define GPU_CC_CX_FF_CLK					2
+#define GPU_CC_CX_GMU_CLK					3
+#define GPU_CC_CXO_AON_CLK					4
+#define GPU_CC_CXO_CLK						5
+#define GPU_CC_DEMET_CLK					6
+#define GPU_CC_DEMET_DIV_CLK_SRC				7
+#define GPU_CC_FF_CLK_SRC					8
+#define GPU_CC_FREQ_MEASURE_CLK					9
+#define GPU_CC_GMU_CLK_SRC					10
+#define GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK				11
+#define GPU_CC_HUB_AON_CLK					12
+#define GPU_CC_HUB_CLK_SRC					13
+#define GPU_CC_HUB_CX_INT_CLK					14
+#define GPU_CC_MEMNOC_GFX_CLK					15
+#define GPU_CC_MND1X_0_GFX3D_CLK				16
+#define GPU_CC_MND1X_1_GFX3D_CLK				17
+#define GPU_CC_PLL0						18
+#define GPU_CC_PLL1						19
+#define GPU_CC_SLEEP_CLK					20
+#define GPU_CC_XO_CLK_SRC					21
+#define GPU_CC_XO_DIV_CLK_SRC					22
+
+/* GPU_CC power domains */
+#define GPU_CC_CX_GDSC						0
+#define GPU_CC_GX_GDSC						1
+
+/* GPU_CC resets */
+#define GPUCC_GPU_CC_ACD_BCR					0
+#define GPUCC_GPU_CC_CX_BCR					1
+#define GPUCC_GPU_CC_FAST_HUB_BCR				2
+#define GPUCC_GPU_CC_FF_BCR					3
+#define GPUCC_GPU_CC_GFX3D_AON_BCR				4
+#define GPUCC_GPU_CC_GMU_BCR					5
+#define GPUCC_GPU_CC_GX_BCR					6
+#define GPUCC_GPU_CC_XO_BCR					7
+
+#endif
diff --git a/include/dt-bindings/power/qcom-rpmpd.h b/include/dt-bindings/power/qcom-rpmpd.h
index 1bf8e87ecd7e..4ede277d20e1 100644
--- a/include/dt-bindings/power/qcom-rpmpd.h
+++ b/include/dt-bindings/power/qcom-rpmpd.h
@@ -207,20 +207,30 @@
 #define SC8280XP_XO		15
 
 /* SDM845 Power Domain performance levels */
-#define RPMH_REGULATOR_LEVEL_RETENTION	16
-#define RPMH_REGULATOR_LEVEL_MIN_SVS	48
-#define RPMH_REGULATOR_LEVEL_LOW_SVS_D1	56
-#define RPMH_REGULATOR_LEVEL_LOW_SVS	64
-#define RPMH_REGULATOR_LEVEL_LOW_SVS_L1	80
-#define RPMH_REGULATOR_LEVEL_SVS	128
-#define RPMH_REGULATOR_LEVEL_SVS_L0	144
-#define RPMH_REGULATOR_LEVEL_SVS_L1	192
-#define RPMH_REGULATOR_LEVEL_SVS_L2	224
-#define RPMH_REGULATOR_LEVEL_NOM	256
-#define RPMH_REGULATOR_LEVEL_NOM_L1	320
-#define RPMH_REGULATOR_LEVEL_NOM_L2	336
-#define RPMH_REGULATOR_LEVEL_TURBO	384
-#define RPMH_REGULATOR_LEVEL_TURBO_L1	416
+#define RPMH_REGULATOR_LEVEL_RETENTION		16
+#define RPMH_REGULATOR_LEVEL_MIN_SVS		48
+#define RPMH_REGULATOR_LEVEL_LOW_SVS_D2		52
+#define RPMH_REGULATOR_LEVEL_LOW_SVS_D1		56
+#define RPMH_REGULATOR_LEVEL_LOW_SVS_D0		60
+#define RPMH_REGULATOR_LEVEL_LOW_SVS		64
+#define RPMH_REGULATOR_LEVEL_LOW_SVS_P1		72
+#define RPMH_REGULATOR_LEVEL_LOW_SVS_L1		80
+#define RPMH_REGULATOR_LEVEL_LOW_SVS_L2		96
+#define RPMH_REGULATOR_LEVEL_SVS		128
+#define RPMH_REGULATOR_LEVEL_SVS_L0		144
+#define RPMH_REGULATOR_LEVEL_SVS_L1		192
+#define RPMH_REGULATOR_LEVEL_SVS_L2		224
+#define RPMH_REGULATOR_LEVEL_NOM		256
+#define RPMH_REGULATOR_LEVEL_NOM_L0		288
+#define RPMH_REGULATOR_LEVEL_NOM_L1		320
+#define RPMH_REGULATOR_LEVEL_NOM_L2		336
+#define RPMH_REGULATOR_LEVEL_TURBO		384
+#define RPMH_REGULATOR_LEVEL_TURBO_L0		400
+#define RPMH_REGULATOR_LEVEL_TURBO_L1		416
+#define RPMH_REGULATOR_LEVEL_TURBO_L2		432
+#define RPMH_REGULATOR_LEVEL_TURBO_L3		448
+#define RPMH_REGULATOR_LEVEL_SUPER_TURBO 	464
+#define RPMH_REGULATOR_LEVEL_SUPER_TURBO_NO_CPR	480
 
 /* MDM9607 Power Domains */
 #define MDM9607_VDDCX		0
diff --git a/include/dt-bindings/reset/qcom,sm8450-gpucc.h b/include/dt-bindings/reset/qcom,sm8450-gpucc.h
new file mode 100644
index 000000000000..58ba8f987107
--- /dev/null
+++ b/include/dt-bindings/reset/qcom,sm8450-gpucc.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef _DT_BINDINGS_RESET_QCOM_GPU_CC_SM8450_H
+#define _DT_BINDINGS_RESET_QCOM_GPU_CC_SM8450_H
+
+#define GPUCC_GPU_CC_ACD_BCR			0
+#define GPUCC_GPU_CC_CX_BCR			1
+#define GPUCC_GPU_CC_FAST_HUB_BCR		2
+#define GPUCC_GPU_CC_FF_BCR			3
+#define GPUCC_GPU_CC_GFX3D_AON_BCR		4
+#define GPUCC_GPU_CC_GMU_BCR			5
+#define GPUCC_GPU_CC_GX_BCR			6
+#define GPUCC_GPU_CC_XO_BCR			7
+#define GPUCC_GPU_CC_GX_ACD_IROOT_BCR		8
+
+#endif