Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...

1 files changed, 58 insertions, 0 deletions

diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index f4b77018c625..6ad4c000661a 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -15,7 +15,9 @@
 #define PHY_ID_BCMAC131			0x0143bc70
 #define PHY_ID_BCM5481			0x0143bca0
 #define PHY_ID_BCM5395			0x0143bcf0
+#define PHY_ID_BCM53125			0x03625f20
 #define PHY_ID_BCM54810			0x03625d00
+#define PHY_ID_BCM54811			0x03625cc0
 #define PHY_ID_BCM5482			0x0143bcb0
 #define PHY_ID_BCM5411			0x00206070
 #define PHY_ID_BCM5421			0x002060e0
@@ -24,6 +26,7 @@
 #define PHY_ID_BCM5461			0x002060c0
 #define PHY_ID_BCM54612E		0x03625e60
 #define PHY_ID_BCM54616S		0x03625d10
+#define PHY_ID_BCM54140			0xae025009
 #define PHY_ID_BCM57780			0x03625d90
 #define PHY_ID_BCM89610			0x03625cd0
 
@@ -114,6 +117,14 @@
 #define MII_BCM54XX_SHD_VAL(x)	((x & 0x1f) << 10)
 #define MII_BCM54XX_SHD_DATA(x)	((x & 0x3ff) << 0)
 
+#define MII_BCM54XX_RDB_ADDR	0x1e
+#define MII_BCM54XX_RDB_DATA	0x1f
+
+/* legacy access control via rdb/expansion register */
+#define BCM54XX_RDB_REG0087		0x0087
+#define BCM54XX_EXP_REG7E		(MII_BCM54XX_EXP_SEL_ER + 0x7E)
+#define BCM54XX_ACCESS_MODE_LEGACY_EN	BIT(15)
+
 /*
  * AUXILIARY CONTROL SHADOW ACCESS REGISTERS.  (PHY REG 0x18)
  */
@@ -290,4 +301,51 @@
 #define MII_BRCM_CORE_EXPB0	0xB0
 #define MII_BRCM_CORE_EXPB1	0xB1
 
+/* Enhanced Cable Diagnostics */
+#define BCM54XX_RDB_ECD_CTRL			0x2a0
+#define BCM54XX_EXP_ECD_CTRL			(MII_BCM54XX_EXP_SEL_ER + 0xc0)
+
+#define BCM54XX_ECD_CTRL_CABLE_TYPE_CAT3	1	/* CAT3 or worse */
+#define BCM54XX_ECD_CTRL_CABLE_TYPE_CAT5	0	/* CAT5 or better */
+#define BCM54XX_ECD_CTRL_CABLE_TYPE_MASK	BIT(0)	/* cable type */
+#define BCM54XX_ECD_CTRL_INVALID		BIT(3)	/* invalid result */
+#define BCM54XX_ECD_CTRL_UNIT_CM		0	/* centimeters */
+#define BCM54XX_ECD_CTRL_UNIT_M			1	/* meters */
+#define BCM54XX_ECD_CTRL_UNIT_MASK		BIT(10)	/* cable length unit */
+#define BCM54XX_ECD_CTRL_IN_PROGRESS		BIT(11)	/* test in progress */
+#define BCM54XX_ECD_CTRL_BREAK_LINK		BIT(12)	/* unconnect link
+							 * during test
+							 */
+#define BCM54XX_ECD_CTRL_CROSS_SHORT_DIS	BIT(13)	/* disable inter-pair
+							 * short check
+							 */
+#define BCM54XX_ECD_CTRL_RUN			BIT(15)	/* run immediate */
+
+#define BCM54XX_RDB_ECD_FAULT_TYPE		0x2a1
+#define BCM54XX_EXP_ECD_FAULT_TYPE		(MII_BCM54XX_EXP_SEL_ER + 0xc1)
+#define BCM54XX_ECD_FAULT_TYPE_INVALID		0x0
+#define BCM54XX_ECD_FAULT_TYPE_OK		0x1
+#define BCM54XX_ECD_FAULT_TYPE_OPEN		0x2
+#define BCM54XX_ECD_FAULT_TYPE_SAME_SHORT	0x3 /* short same pair */
+#define BCM54XX_ECD_FAULT_TYPE_CROSS_SHORT	0x4 /* short different pairs */
+#define BCM54XX_ECD_FAULT_TYPE_BUSY		0x9
+#define BCM54XX_ECD_FAULT_TYPE_PAIR_D_MASK	GENMASK(3, 0)
+#define BCM54XX_ECD_FAULT_TYPE_PAIR_C_MASK	GENMASK(7, 4)
+#define BCM54XX_ECD_FAULT_TYPE_PAIR_B_MASK	GENMASK(11, 8)
+#define BCM54XX_ECD_FAULT_TYPE_PAIR_A_MASK	GENMASK(15, 12)
+#define BCM54XX_ECD_PAIR_A_LENGTH_RESULTS	0x2a2
+#define BCM54XX_ECD_PAIR_B_LENGTH_RESULTS	0x2a3
+#define BCM54XX_ECD_PAIR_C_LENGTH_RESULTS	0x2a4
+#define BCM54XX_ECD_PAIR_D_LENGTH_RESULTS	0x2a5
+
+#define BCM54XX_RDB_ECD_PAIR_A_LENGTH_RESULTS	0x2a2
+#define BCM54XX_EXP_ECD_PAIR_A_LENGTH_RESULTS	(MII_BCM54XX_EXP_SEL_ER + 0xc2)
+#define BCM54XX_RDB_ECD_PAIR_B_LENGTH_RESULTS	0x2a3
+#define BCM54XX_EXP_ECD_PAIR_B_LENGTH_RESULTS	(MII_BCM54XX_EXP_SEL_ER + 0xc3)
+#define BCM54XX_RDB_ECD_PAIR_C_LENGTH_RESULTS	0x2a4
+#define BCM54XX_EXP_ECD_PAIR_C_LENGTH_RESULTS	(MII_BCM54XX_EXP_SEL_ER + 0xc4)
+#define BCM54XX_RDB_ECD_PAIR_D_LENGTH_RESULTS	0x2a5
+#define BCM54XX_EXP_ECD_PAIR_D_LENGTH_RESULTS	(MII_BCM54XX_EXP_SEL_ER + 0xc5)
+#define BCM54XX_ECD_LENGTH_RESULTS_INVALID	0xffff
+
 #endif /* _LINUX_BRCMPHY_H */