Merge tag 'tty-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty / serial driver updates from Greg KH:
 "Here is the "large" TTY and Serial driver update for 5.3-rc1.

  It's in the negative number of lines overall as we removed an obsolete
  serial driver that was causing problems for some people who were
  trying to clean up some apis (the mpsc.c driver, which only worked for
  some pre-production hardware that no one has anymore.)

  Other than that, lots of tiny changes, cleaning up small things along
  with some platform-specific serial driver updates.

  All of these have been in linux-next for a while now with no reported
  issues"

* tag 'tty-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (68 commits)
  tty: serial: fsl_lpuart: add imx8qxp support
  serial: imx: set_termios(): preserve RTS state
  serial: imx: set_termios(): clarify RTS/CTS bits calculation
  serial: imx: set_termios(): factor-out 'ucr2' initial value
  serial: sh-sci: Terminate TX DMA during buffer flushing
  serial: sh-sci: Fix TX DMA buffer flushing and workqueue races
  serial: mpsc: Remove obsolete MPSC driver
  serial: 8250: 8250_core: Fix missing unlock on error in serial8250_register_8250_port()
  serial: stm32: add RX and TX FIFO flush
  serial: stm32: add support of RX FIFO threshold
  serial: stm32: add support of TX FIFO threshold
  serial: stm32: update PIO transmission
  serial: stm32: add support of timeout interrupt for RX
  Revert "serial: 8250: Don't service RX FIFO if interrupts are disabled"
  tty/serial/8250: use mctrl_gpio helpers
  serial: mctrl_gpio: Check if GPIO property exisits before requesting it
  serial: 8250: pericom_do_set_divisor can be static
  tty: serial_core: Set port active bit in uart_port_activate
  serial: 8250: Add MSR/MCR TIOCM conversion wrapper functions
  serial: 8250: factor out serial8250_{set,clear}_THRI() helpers
  ...

2 files changed, 1 insertions, 46 deletions

diff --git a/include/linux/mv643xx.h b/include/linux/mv643xx.h
index 4471cf96ef69..47e5679b48e1 100644
--- a/include/linux/mv643xx.h
+++ b/include/linux/mv643xx.h
@@ -918,52 +918,6 @@
 
 extern void mv64340_irq_init(unsigned int base);
 
-/* MPSC Platform Device, Driver Data (Shared register regions) */
-#define	MPSC_SHARED_NAME		"mpsc_shared"
-
-#define	MPSC_ROUTING_BASE_ORDER		0
-#define	MPSC_SDMA_INTR_BASE_ORDER	1
-
-#define MPSC_ROUTING_REG_BLOCK_SIZE	0x000c
-#define MPSC_SDMA_INTR_REG_BLOCK_SIZE	0x0084
-
-struct mpsc_shared_pdata {
-	u32	mrr_val;
-	u32	rcrr_val;
-	u32	tcrr_val;
-	u32	intr_cause_val;
-	u32	intr_mask_val;
-};
-
-/* MPSC Platform Device, Driver Data */
-#define	MPSC_CTLR_NAME			"mpsc"
-
-#define	MPSC_BASE_ORDER			0
-#define	MPSC_SDMA_BASE_ORDER		1
-#define	MPSC_BRG_BASE_ORDER		2
-
-#define MPSC_REG_BLOCK_SIZE		0x0038
-#define MPSC_SDMA_REG_BLOCK_SIZE	0x0c18
-#define MPSC_BRG_REG_BLOCK_SIZE		0x0008
-
-struct mpsc_pdata {
-	u8	mirror_regs;
-	u8	cache_mgmt;
-	u8	max_idle;
-	int	default_baud;
-	int	default_bits;
-	int	default_parity;
-	int	default_flow;
-	u32	chr_1_val;
-	u32	chr_2_val;
-	u32	chr_10_val;
-	u32	mpcr_val;
-	u32	bcr_val;
-	u8	brg_can_tune;
-	u8	brg_clk_src;
-	u32	brg_clk_freq;
-};
-
 /* Watchdog Platform Device, Driver Data */
 #define	MV64x60_WDT_NAME			"mv64x60_wdt"
 
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 5e0b59422a68..bb2bc99388ca 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -110,6 +110,7 @@ struct uart_8250_port {
 						 *   if no_console_suspend
 						 */
 	unsigned char		probe;
+	struct mctrl_gpios	*gpios;
 #define UART_PROBE_RSA	(1 << 0)
 
 	/*