Merge tag 'staging-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO updates from Greg KH:
 "Here's the "big" staging/iio pull request for 4.10-rc1.

  Not as big as 4.9 was, but still just over a thousand changes. We
  almost broke even of lines added vs. removed, as the slicoss driver
  was removed (got a "clean" driver for the same hardware through the
  netdev tree), and some iio drivers were also dropped, but I think we
  ended up adding a few thousand lines to the source tree in the end.
  Other than that it's a lot of minor fixes all over the place, nothing
  major stands out at all.

  All of these have been in linux-next for a while. There will be a
  merge conflict with Al's vfs tree in the lustre code, but the
  resolution for that should be pretty simple, that too has been in
  linux-next"

* tag 'staging-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1002 commits)
  staging: comedi: comedidev.h: Document usage of 'detach' handler
  staging: fsl-mc: remove unnecessary info prints from bus driver
  staging: fsl-mc: add sysfs ABI doc
  staging/lustre/o2iblnd: Fix misspelled attemps->attempts
  staging/lustre/o2iblnd: Fix misspelling intialized->intialized
  staging/lustre: Convert all bare unsigned to unsigned int
  staging/lustre/socklnd: Fix whitespace problem
  staging/lustre/o2iblnd: Add missing space
  staging/lustre/lnetselftest: Fix potential integer overflow
  staging: greybus: audio_module: remove redundant OOM message
  staging: dgnc: Fix lines longer than 80 characters
  staging: dgnc: fix blank line after '{' warnings.
  staging/android: remove Sync Framework tasks from TODO
  staging/lustre/osc: Revert erroneous list_for_each_entry_safe use
  staging: slicoss: remove the staging driver
  staging: lustre: libcfs: remove lnet upcall code
  staging: lustre: remove set but unused variables
  staging: lustre: osc: set lock data for readahead lock
  staging: lustre: import: don't reconnect during connect interpret
  staging: lustre: clio: remove mtime check in vvp_io_fault_start()
  ...

12 files changed, 350 insertions, 7 deletions

diff --git a/include/linux/iio/adc/ad_sigma_delta.h b/include/linux/iio/adc/ad_sigma_delta.h
index e7fdec4db9da..5ba430cc9a87 100644
--- a/include/linux/iio/adc/ad_sigma_delta.h
+++ b/include/linux/iio/adc/ad_sigma_delta.h
@@ -136,6 +136,7 @@ int ad_sd_validate_trigger(struct iio_dev *indio_dev, struct iio_trigger *trig);
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
 			BIT(IIO_CHAN_INFO_OFFSET), \
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
 		.scan_index = (_si), \
 		.scan_type = { \
 			.sign = 'u', \
diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h
index 9edccfba1ffb..47eeec3218b5 100644
--- a/include/linux/iio/consumer.h
+++ b/include/linux/iio/consumer.h
@@ -226,6 +226,34 @@ int iio_read_channel_processed(struct iio_channel *chan, int *val);
 int iio_write_channel_raw(struct iio_channel *chan, int val);
 
 /**
+ * iio_read_max_channel_raw() - read maximum available raw value from a given
+ *				channel, i.e. the maximum possible value.
+ * @chan:		The channel being queried.
+ * @val:		Value read back.
+ *
+ * Note raw reads from iio channels are in adc counts and hence
+ * scale will need to be applied if standard units are required.
+ */
+int iio_read_max_channel_raw(struct iio_channel *chan, int *val);
+
+/**
+ * iio_read_avail_channel_raw() - read available raw values from a given channel
+ * @chan:		The channel being queried.
+ * @vals:		Available values read back.
+ * @length:		Number of entries in vals.
+ *
+ * Returns an error code, IIO_AVAIL_RANGE or IIO_AVAIL_LIST.
+ *
+ * For ranges, three vals are always returned; min, step and max.
+ * For lists, all the possible values are enumerated.
+ *
+ * Note raw available values from iio channels are in adc counts and
+ * hence scale will need to be applied if standard units are required.
+ */
+int iio_read_avail_channel_raw(struct iio_channel *chan,
+			       const int **vals, int *length);
+
+/**
  * iio_get_channel_type() - get the type of a channel
  * @channel:		The channel being queried.
  * @type:		The type of the channel.
@@ -236,6 +264,19 @@ int iio_get_channel_type(struct iio_channel *channel,
 			 enum iio_chan_type *type);
 
 /**
+ * iio_read_channel_offset() - read the offset value for a channel
+ * @chan:		The channel being queried.
+ * @val:		First part of value read back.
+ * @val2:		Second part of value read back.
+ *
+ * Note returns a description of what is in val and val2, such
+ * as IIO_VAL_INT_PLUS_MICRO telling us we have a value of val
+ * + val2/1e6
+ */
+int iio_read_channel_offset(struct iio_channel *chan, int *val,
+			   int *val2);
+
+/**
  * iio_read_channel_scale() - read the scale value for a channel
  * @chan:		The channel being queried.
  * @val:		First part of value read back.
diff --git a/include/linux/iio/dac/mcp4725.h b/include/linux/iio/dac/mcp4725.h
index 91530e6611e9..628b2cf54c50 100644
--- a/include/linux/iio/dac/mcp4725.h
+++ b/include/linux/iio/dac/mcp4725.h
@@ -9,8 +9,18 @@
 #ifndef IIO_DAC_MCP4725_H_
 #define IIO_DAC_MCP4725_H_
 
+/**
+ * struct mcp4725_platform_data - MCP4725/6 DAC specific data.
+ * @use_vref: Whether an external reference voltage on Vref pin should be used.
+ *            Additional vref-supply must be specified when used.
+ * @vref_buffered: Controls buffering of the external reference voltage.
+ *
+ * Vref related settings are available only on MCP4756. See
+ * Documentation/devicetree/bindings/iio/dac/mcp4725.txt for more information.
+ */
 struct mcp4725_platform_data {
-	u16 vref_mv;
+	bool use_vref;
+	bool vref_buffered;
 };
 
 #endif /* IIO_DAC_MCP4725_H_ */
diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
index b4a0679e4a49..3f5ea2e9a39e 100644
--- a/include/linux/iio/iio.h
+++ b/include/linux/iio/iio.h
@@ -225,12 +225,22 @@ struct iio_event_spec {
  *			endianness:	little or big endian
  * @info_mask_separate: What information is to be exported that is specific to
  *			this channel.
+ * @info_mask_separate_available: What availability information is to be
+ *			exported that is specific to this channel.
  * @info_mask_shared_by_type: What information is to be exported that is shared
  *			by all channels of the same type.
+ * @info_mask_shared_by_type_available: What availability information is to be
+ *			exported that is shared by all channels of the same
+ *			type.
  * @info_mask_shared_by_dir: What information is to be exported that is shared
  *			by all channels of the same direction.
+ * @info_mask_shared_by_dir_available: What availability information is to be
+ *			exported that is shared by all channels of the same
+ *			direction.
  * @info_mask_shared_by_all: What information is to be exported that is shared
  *			by all channels.
+ * @info_mask_shared_by_all_available: What availability information is to be
+ *			exported that is shared by all channels.
  * @event_spec:		Array of events which should be registered for this
  *			channel.
  * @num_event_specs:	Size of the event_spec array.
@@ -269,9 +279,13 @@ struct iio_chan_spec {
 		enum iio_endian endianness;
 	} scan_type;
 	long			info_mask_separate;
+	long			info_mask_separate_available;
 	long			info_mask_shared_by_type;
+	long			info_mask_shared_by_type_available;
 	long			info_mask_shared_by_dir;
+	long			info_mask_shared_by_dir_available;
 	long			info_mask_shared_by_all;
+	long			info_mask_shared_by_all_available;
 	const struct iio_event_spec *event_spec;
 	unsigned int		num_event_specs;
 	const struct iio_chan_spec_ext_info *ext_info;
@@ -301,6 +315,23 @@ static inline bool iio_channel_has_info(const struct iio_chan_spec *chan,
 		(chan->info_mask_shared_by_all & BIT(type));
 }
 
+/**
+ * iio_channel_has_available() - Checks if a channel has an available attribute
+ * @chan: The channel to be queried
+ * @type: Type of the available attribute to be checked
+ *
+ * Returns true if the channel supports reporting available values for the
+ * given attribute type, false otherwise.
+ */
+static inline bool iio_channel_has_available(const struct iio_chan_spec *chan,
+					     enum iio_chan_info_enum type)
+{
+	return (chan->info_mask_separate_available & BIT(type)) |
+		(chan->info_mask_shared_by_type_available & BIT(type)) |
+		(chan->info_mask_shared_by_dir_available & BIT(type)) |
+		(chan->info_mask_shared_by_all_available & BIT(type));
+}
+
 #define IIO_CHAN_SOFT_TIMESTAMP(_si) {					\
 	.type = IIO_TIMESTAMP,						\
 	.channel = -1,							\
@@ -349,6 +380,14 @@ struct iio_dev;
  *			max_len specifies maximum number of elements
  *			vals pointer can contain. val_len is used to return
  *			length of valid elements in vals.
+ * @read_avail:		function to return the available values from the device.
+ *			mask specifies which value. Note 0 means the available
+ *			values for the channel in question.  Return value
+ *			specifies if a IIO_AVAIL_LIST or a IIO_AVAIL_RANGE is
+ *			returned in vals. The type of the vals are returned in
+ *			type and the number of vals is returned in length. For
+ *			ranges, there are always three vals returned; min, step
+ *			and max. For lists, all possible values are enumerated.
  * @write_raw:		function to write a value to the device.
  *			Parameters are the same as for read_raw.
  * @write_raw_get_fmt:	callback function to query the expected
@@ -381,7 +420,7 @@ struct iio_dev;
  **/
 struct iio_info {
 	struct module			*driver_module;
-	struct attribute_group		*event_attrs;
+	const struct attribute_group	*event_attrs;
 	const struct attribute_group	*attrs;
 
 	int (*read_raw)(struct iio_dev *indio_dev,
@@ -397,6 +436,13 @@ struct iio_info {
 			int *val_len,
 			long mask);
 
+	int (*read_avail)(struct iio_dev *indio_dev,
+			  struct iio_chan_spec const *chan,
+			  const int **vals,
+			  int *type,
+			  int *length,
+			  long mask);
+
 	int (*write_raw)(struct iio_dev *indio_dev,
 			 struct iio_chan_spec const *chan,
 			 int val,
diff --git a/include/linux/iio/sysfs.h b/include/linux/iio/sysfs.h
index 9cd8f747212f..ce9426c507fd 100644
--- a/include/linux/iio/sysfs.h
+++ b/include/linux/iio/sysfs.h
@@ -55,10 +55,34 @@ struct iio_const_attr {
 	{ .dev_attr = __ATTR(_name, _mode, _show, _store),	\
 	  .address = _addr }
 
+#define IIO_ATTR_RO(_name, _addr)       \
+	{ .dev_attr = __ATTR_RO(_name), \
+	  .address = _addr }
+
+#define IIO_ATTR_WO(_name, _addr)       \
+	{ .dev_attr = __ATTR_WO(_name), \
+	  .address = _addr }
+
+#define IIO_ATTR_RW(_name, _addr)       \
+	{ .dev_attr = __ATTR_RW(_name), \
+	  .address = _addr }
+
 #define IIO_DEVICE_ATTR(_name, _mode, _show, _store, _addr)	\
 	struct iio_dev_attr iio_dev_attr_##_name		\
 	= IIO_ATTR(_name, _mode, _show, _store, _addr)
 
+#define IIO_DEVICE_ATTR_RO(_name, _addr)                       \
+	struct iio_dev_attr iio_dev_attr_##_name                \
+	= IIO_ATTR_RO(_name, _addr)
+
+#define IIO_DEVICE_ATTR_WO(_name, _addr)                       \
+	struct iio_dev_attr iio_dev_attr_##_name                \
+	= IIO_ATTR_WO(_name, _addr)
+
+#define IIO_DEVICE_ATTR_RW(_name, _addr)                                   \
+	struct iio_dev_attr iio_dev_attr_##_name                            \
+	= IIO_ATTR_RW(_name, _addr)
+
 #define IIO_DEVICE_ATTR_NAMED(_vname, _name, _mode, _show, _store, _addr) \
 	struct iio_dev_attr iio_dev_attr_##_vname			\
 	= IIO_ATTR(_name, _mode, _show, _store, _addr)
diff --git a/include/linux/iio/trigger.h b/include/linux/iio/trigger.h
index 4f1154f7a33c..ea08302f2d7b 100644
--- a/include/linux/iio/trigger.h
+++ b/include/linux/iio/trigger.h
@@ -170,6 +170,8 @@ void iio_trigger_free(struct iio_trigger *trig);
  */
 bool iio_trigger_using_own(struct iio_dev *indio_dev);
 
+int iio_trigger_validate_own_device(struct iio_trigger *trig,
+				     struct iio_dev *indio_dev);
 
 #else
 struct iio_trigger;
diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h
index 32b579525004..2aa7b6384d64 100644
--- a/include/linux/iio/types.h
+++ b/include/linux/iio/types.h
@@ -29,4 +29,9 @@ enum iio_event_info {
 #define IIO_VAL_FRACTIONAL 10
 #define IIO_VAL_FRACTIONAL_LOG2 11
 
+enum iio_available_type {
+	IIO_AVAIL_LIST,
+	IIO_AVAIL_RANGE,
+};
+
 #endif /* _IIO_TYPES_H_ */
diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
index 76f7ef4d3a0d..f62043a75f43 100644
--- a/include/linux/mfd/cros_ec.h
+++ b/include/linux/mfd/cros_ec.h
@@ -148,6 +148,15 @@ struct cros_ec_device {
 	int event_size;
 };
 
+/**
+ * struct cros_ec_sensor_platform - ChromeOS EC sensor platform information
+ *
+ * @sensor_num: Id of the sensor, as reported by the EC.
+ */
+struct cros_ec_sensor_platform {
+	u8 sensor_num;
+};
+
 /* struct cros_ec_platform - ChromeOS EC platform information
  *
  * @ec_name: name of EC device (e.g. 'cros-ec', 'cros-pd', ...)
@@ -175,6 +184,7 @@ struct cros_ec_dev {
 	struct cros_ec_device *ec_dev;
 	struct device *dev;
 	u16 cmd_offset;
+	u32 features[2];
 };
 
 /**
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 76728ff37d01..1683003603f3 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -713,6 +713,90 @@ struct ec_response_get_set_value {
 /* More than one command can use these structs to get/set paramters. */
 #define EC_CMD_GSV_PAUSE_IN_S5	0x0c
 
+/*****************************************************************************/
+/* List the features supported by the firmware */
+#define EC_CMD_GET_FEATURES  0x0d
+
+/* Supported features */
+enum ec_feature_code {
+	/*
+	 * This image contains a limited set of features. Another image
+	 * in RW partition may support more features.
+	 */
+	EC_FEATURE_LIMITED = 0,
+	/*
+	 * Commands for probing/reading/writing/erasing the flash in the
+	 * EC are present.
+	 */
+	EC_FEATURE_FLASH = 1,
+	/*
+	 * Can control the fan speed directly.
+	 */
+	EC_FEATURE_PWM_FAN = 2,
+	/*
+	 * Can control the intensity of the keyboard backlight.
+	 */
+	EC_FEATURE_PWM_KEYB = 3,
+	/*
+	 * Support Google lightbar, introduced on Pixel.
+	 */
+	EC_FEATURE_LIGHTBAR = 4,
+	/* Control of LEDs  */
+	EC_FEATURE_LED = 5,
+	/* Exposes an interface to control gyro and sensors.
+	 * The host goes through the EC to access these sensors.
+	 * In addition, the EC may provide composite sensors, like lid angle.
+	 */
+	EC_FEATURE_MOTION_SENSE = 6,
+	/* The keyboard is controlled by the EC */
+	EC_FEATURE_KEYB = 7,
+	/* The AP can use part of the EC flash as persistent storage. */
+	EC_FEATURE_PSTORE = 8,
+	/* The EC monitors BIOS port 80h, and can return POST codes. */
+	EC_FEATURE_PORT80 = 9,
+	/*
+	 * Thermal management: include TMP specific commands.
+	 * Higher level than direct fan control.
+	 */
+	EC_FEATURE_THERMAL = 10,
+	/* Can switch the screen backlight on/off */
+	EC_FEATURE_BKLIGHT_SWITCH = 11,
+	/* Can switch the wifi module on/off */
+	EC_FEATURE_WIFI_SWITCH = 12,
+	/* Monitor host events, through for example SMI or SCI */
+	EC_FEATURE_HOST_EVENTS = 13,
+	/* The EC exposes GPIO commands to control/monitor connected devices. */
+	EC_FEATURE_GPIO = 14,
+	/* The EC can send i2c messages to downstream devices. */
+	EC_FEATURE_I2C = 15,
+	/* Command to control charger are included */
+	EC_FEATURE_CHARGER = 16,
+	/* Simple battery support. */
+	EC_FEATURE_BATTERY = 17,
+	/*
+	 * Support Smart battery protocol
+	 * (Common Smart Battery System Interface Specification)
+	 */
+	EC_FEATURE_SMART_BATTERY = 18,
+	/* EC can dectect when the host hangs. */
+	EC_FEATURE_HANG_DETECT = 19,
+	/* Report power information, for pit only */
+	EC_FEATURE_PMU = 20,
+	/* Another Cros EC device is present downstream of this one */
+	EC_FEATURE_SUB_MCU = 21,
+	/* Support USB Power delivery (PD) commands */
+	EC_FEATURE_USB_PD = 22,
+	/* Control USB multiplexer, for audio through USB port for instance. */
+	EC_FEATURE_USB_MUX = 23,
+	/* Motion Sensor code has an internal software FIFO */
+	EC_FEATURE_MOTION_SENSE_FIFO = 24,
+};
+
+#define EC_FEATURE_MASK_0(event_code) (1UL << (event_code % 32))
+#define EC_FEATURE_MASK_1(event_code) (1UL << (event_code - 32))
+struct ec_response_get_features {
+	uint32_t flags[2];
+} __packed;
 
 /*****************************************************************************/
 /* Flash commands */
@@ -1315,6 +1399,24 @@ enum motionsense_command {
 	 */
 	MOTIONSENSE_CMD_KB_WAKE_ANGLE = 5,
 
+	/*
+	 * Returns a single sensor data.
+	 */
+	MOTIONSENSE_CMD_DATA = 6,
+
+	/*
+	 * Perform low level calibration.. On sensors that support it, ask to
+	 * do offset calibration.
+	 */
+	MOTIONSENSE_CMD_PERFORM_CALIB = 10,
+
+	/*
+	 * Sensor Offset command is a setter/getter command for the offset used
+	 * for calibration. The offsets can be calculated by the host, or via
+	 * PERFORM_CALIB command.
+	 */
+	MOTIONSENSE_CMD_SENSOR_OFFSET = 11,
+
 	/* Number of motionsense sub-commands. */
 	MOTIONSENSE_NUM_CMDS
 };
@@ -1335,12 +1437,18 @@ enum motionsensor_id {
 enum motionsensor_type {
 	MOTIONSENSE_TYPE_ACCEL = 0,
 	MOTIONSENSE_TYPE_GYRO = 1,
+	MOTIONSENSE_TYPE_MAG = 2,
+	MOTIONSENSE_TYPE_PROX = 3,
+	MOTIONSENSE_TYPE_LIGHT = 4,
+	MOTIONSENSE_TYPE_ACTIVITY = 5,
+	MOTIONSENSE_TYPE_MAX
 };
 
 /* List of motion sensor locations. */
 enum motionsensor_location {
 	MOTIONSENSE_LOC_BASE = 0,
 	MOTIONSENSE_LOC_LID = 1,
+	MOTIONSENSE_LOC_MAX,
 };
 
 /* List of motion sensor chips. */
@@ -1361,6 +1469,31 @@ enum motionsensor_chip {
  */
 #define EC_MOTION_SENSE_NO_VALUE -1
 
+#define EC_MOTION_SENSE_INVALID_CALIB_TEMP 0x8000
+
+/* Set Calibration information */
+#define MOTION_SENSE_SET_OFFSET	1
+
+struct ec_response_motion_sensor_data {
+	/* Flags for each sensor. */
+	uint8_t flags;
+	/* Sensor number the data comes from */
+	uint8_t sensor_num;
+	/* Each sensor is up to 3-axis. */
+	union {
+		int16_t             data[3];
+		struct {
+			uint16_t    rsvd;
+			uint32_t    timestamp;
+		} __packed;
+		struct {
+			uint8_t     activity; /* motionsensor_activity */
+			uint8_t     state;
+			int16_t     add_info[2];
+		};
+	};
+} __packed;
+
 struct ec_params_motion_sense {
 	uint8_t cmd;
 	union {
@@ -1378,9 +1511,37 @@ struct ec_params_motion_sense {
 			int16_t data;
 		} ec_rate, kb_wake_angle;
 
+		/* Used for MOTIONSENSE_CMD_SENSOR_OFFSET */
+		struct {
+			uint8_t sensor_num;
+
+			/*
+			 * bit 0: If set (MOTION_SENSE_SET_OFFSET), set
+			 * the calibration information in the EC.
+			 * If unset, just retrieve calibration information.
+			 */
+			uint16_t flags;
+
+			/*
+			 * Temperature at calibration, in units of 0.01 C
+			 * 0x8000: invalid / unknown.
+			 * 0x0: 0C
+			 * 0x7fff: +327.67C
+			 */
+			int16_t temp;
+
+			/*
+			 * Offset for calibration.
+			 * Unit:
+			 * Accelerometer: 1/1024 g
+			 * Gyro:          1/1024 deg/s
+			 * Compass:       1/16 uT
+			 */
+			int16_t offset[3];
+		} __packed sensor_offset;
+
 		/* Used for MOTIONSENSE_CMD_INFO. */
 		struct {
-			/* Should be element of enum motionsensor_id. */
 			uint8_t sensor_num;
 		} info;
 
@@ -1410,11 +1571,14 @@ struct ec_response_motion_sense {
 			/* Flags representing the motion sensor module. */
 			uint8_t module_flags;
 
-			/* Flags for each sensor in enum motionsensor_id. */
-			uint8_t sensor_flags[EC_MOTION_SENSOR_COUNT];
+			/* Number of sensors managed directly by the EC. */
+			uint8_t sensor_count;
 
-			/* Array of all sensor data. Each sensor is 3-axis. */
-			int16_t data[3*EC_MOTION_SENSOR_COUNT];
+			/*
+			 * Sensor data is truncated if response_max is too small
+			 * for holding all the data.
+			 */
+			struct ec_response_motion_sensor_data sensor[0];
 		} dump;
 
 		/* Used for MOTIONSENSE_CMD_INFO. */
@@ -1429,6 +1593,9 @@ struct ec_response_motion_sense {
 			uint8_t chip;
 		} info;
 
+		/* Used for MOTIONSENSE_CMD_DATA */
+		struct ec_response_motion_sensor_data data;
+
 		/*
 		 * Used for MOTIONSENSE_CMD_EC_RATE, MOTIONSENSE_CMD_SENSOR_ODR,
 		 * MOTIONSENSE_CMD_SENSOR_RANGE, and
@@ -1438,6 +1605,12 @@ struct ec_response_motion_sense {
 			/* Current value of the parameter queried. */
 			int32_t ret;
 		} ec_rate, sensor_odr, sensor_range, kb_wake_angle;
+
+		/* Used for MOTIONSENSE_CMD_SENSOR_OFFSET */
+		struct {
+			int16_t temp;
+			int16_t offset[3];
+		} sensor_offset, perform_calib;
 	};
 } __packed;
 
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index 7f55b8b41032..b9a53e013bff 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -23,6 +23,8 @@
 #define REG_IRQENABLE		0x02C
 #define REG_IRQCLR		0x030
 #define REG_IRQWAKEUP		0x034
+#define REG_DMAENABLE_SET	0x038
+#define REG_DMAENABLE_CLEAR	0x03c
 #define REG_CTRL		0x040
 #define REG_ADCFSM		0x044
 #define REG_CLKDIV		0x04C
@@ -36,6 +38,7 @@
 #define REG_FIFO0THR		0xE8
 #define REG_FIFO1CNT		0xF0
 #define REG_FIFO1THR		0xF4
+#define REG_DMA1REQ		0xF8
 #define REG_FIFO0		0x100
 #define REG_FIFO1		0x200
 
@@ -126,6 +129,10 @@
 #define FIFOREAD_DATA_MASK (0xfff << 0)
 #define FIFOREAD_CHNLID_MASK (0xf << 16)
 
+/* DMA ENABLE/CLEAR Register */
+#define DMA_FIFO0		BIT(0)
+#define DMA_FIFO1		BIT(1)
+
 /* Sequencer Status */
 #define SEQ_STATUS BIT(5)
 #define CHARGE_STEP		0x11
@@ -155,6 +162,7 @@ struct ti_tscadc_dev {
 	struct device *dev;
 	struct regmap *regmap;
 	void __iomem *tscadc_base;
+	phys_addr_t tscadc_phys_base;
 	int irq;
 	int used_cells;	/* 1-2 */
 	int tsc_wires;
diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h
index 3fb357193f09..cb979ad90401 100644
--- a/include/soc/bcm2835/raspberrypi-firmware.h
+++ b/include/soc/bcm2835/raspberrypi-firmware.h
@@ -109,14 +109,35 @@ enum rpi_firmware_property_tag {
 	RPI_FIRMWARE_FRAMEBUFFER_SET_OVERSCAN =               0x0004800a,
 	RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE =                0x0004800b,
 
+	RPI_FIRMWARE_VCHIQ_INIT =                             0x00048010,
+
 	RPI_FIRMWARE_GET_COMMAND_LINE =                       0x00050001,
 	RPI_FIRMWARE_GET_DMA_CHANNELS =                       0x00060001,
 };
 
+#if IS_ENABLED(CONFIG_RASPBERRYPI_FIRMWARE)
 int rpi_firmware_property(struct rpi_firmware *fw,
 			  u32 tag, void *data, size_t len);
 int rpi_firmware_property_list(struct rpi_firmware *fw,
 			       void *data, size_t tag_size);
 struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node);
+#else
+static inline int rpi_firmware_property(struct rpi_firmware *fw, u32 tag,
+					void *data, size_t len)
+{
+	return 0;
+}
+
+static inline int rpi_firmware_property_list(struct rpi_firmware *fw,
+					     void *data, size_t tag_size)
+{
+	return 0;
+}
+
+static inline struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node)
+{
+	return NULL;
+}
+#endif
 
 #endif /* __SOC_RASPBERRY_FIRMWARE_H__ */
diff --git a/include/uapi/linux/iio/types.h b/include/uapi/linux/iio/types.h
index 22e5e589a274..e54d14a7f876 100644
--- a/include/uapi/linux/iio/types.h
+++ b/include/uapi/linux/iio/types.h
@@ -40,6 +40,8 @@ enum iio_chan_type {
 	IIO_PH,
 	IIO_UVINDEX,
 	IIO_ELECTRICALCONDUCTIVITY,
+	IIO_COUNT,
+	IIO_INDEX,
 };
 
 enum iio_modifier {