Merge tag 'tty-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here is the big tty/serial driver update for 4.3-rc1.

  Not many major things, a number of driver updates and changes, and the
  8250 driver got split up a bit to make it easier to work with by
  moving some functions to a new file.  Full details are in the
  shortlog.

  All have been in linux-next with no reported issues"

* tag 'tty-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (90 commits)
  serial: imx: save and restore context in the suspend path
  serial: imx: allow waking up on RTSD
  serial: imx: introduce serial_imx_enable_wakeup()
  serial: imx: remove unbalanced clk_prepare
  serial: 8250: move rx_running out of the bitfield
  tty: serial: 8250_omap: do not use RX DMA if pause is not supported
  serial:8250_dw: do not alter CTS and DCTS since AFE is enabled
  tty: serial: men_z135_uart.c: Don't initialize port->lock
  tty: serial: men_z135_uart.c: Fix race between IRQ and set_termios()
  serial: 8250: bind to ALi Fast Infrared Controller (ALI5123)
  serial: 8250: don't bind to SMSC IrCC IR port
  serial: mxs-auart: fix baud rate range
  serial: mxs-auart: keep the AUART unit in reset state when not in use
  serial: mxs-auart: use a function name to reflect what it really does
  serial: 8250_pci: fix mode after S3/S4 resume for F81504/508/512
  sc16is7xx: constify devtype
  sc16is7xx: support multiple devices
  sc16is7xx: save and use per-chip line number
  uart: pl011: Add support to ZTE ZX296702 uart
  uart: pl011: Improve LCRH register access decision
  ...

6 files changed, 165 insertions, 105 deletions

diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index 0ddb5c02ad8b..6a0a89ed7f81 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -33,12 +33,14 @@
 #define UART01x_DR		0x00	/* Data read or written from the interface. */
 #define UART01x_RSR		0x04	/* Receive status register (Read). */
 #define UART01x_ECR		0x04	/* Error clear register (Write). */
+#define ZX_UART01x_DR		0x04	/* Data read or written from the interface. */
 #define UART010_LCRH		0x08	/* Line control register, high byte. */
 #define ST_UART011_DMAWM	0x08    /* DMA watermark configure register. */
 #define UART010_LCRM		0x0C	/* Line control register, middle byte. */
 #define ST_UART011_TIMEOUT	0x0C    /* Timeout period register. */
 #define UART010_LCRL		0x10	/* Line control register, low byte. */
 #define UART010_CR		0x14	/* Control register. */
+#define ZX_UART01x_FR		0x14	/* Flag register (Read only). */
 #define UART01x_FR		0x18	/* Flag register (Read only). */
 #define UART010_IIR		0x1C	/* Interrupt identification register (Read). */
 #define UART010_ICR		0x1C	/* Interrupt clear register (Write). */
@@ -49,13 +51,21 @@
 #define UART011_LCRH		0x2c	/* Line control register. */
 #define ST_UART011_LCRH_TX	0x2c    /* Tx Line control register. */
 #define UART011_CR		0x30	/* Control register. */
+#define ZX_UART011_LCRH_TX	0x30    /* Tx Line control register. */
 #define UART011_IFLS		0x34	/* Interrupt fifo level select. */
+#define ZX_UART011_CR		0x34	/* Control register. */
+#define ZX_UART011_IFLS		0x38	/* Interrupt fifo level select. */
 #define UART011_IMSC		0x38	/* Interrupt mask. */
 #define UART011_RIS		0x3c	/* Raw interrupt status. */
 #define UART011_MIS		0x40	/* Masked interrupt status. */
+#define ZX_UART011_IMSC		0x40	/* Interrupt mask. */
 #define UART011_ICR		0x44	/* Interrupt clear register. */
+#define ZX_UART011_RIS		0x44	/* Raw interrupt status. */
 #define UART011_DMACR		0x48	/* DMA control register. */
+#define ZX_UART011_MIS		0x48	/* Masked interrupt status. */
+#define ZX_UART011_ICR		0x4c	/* Interrupt clear register. */
 #define ST_UART011_XFCR		0x50	/* XON/XOFF control register. */
+#define ZX_UART011_DMACR	0x50	/* DMA control register. */
 #define ST_UART011_XON1		0x54	/* XON1 register. */
 #define ST_UART011_XON2		0x58	/* XON2 register. */
 #define ST_UART011_XOFF1	0x5C	/* XON1 register. */
@@ -75,15 +85,19 @@
 #define UART01x_RSR_PE 		0x02
 #define UART01x_RSR_FE 		0x01
 
+#define ZX_UART01x_FR_BUSY	0x300
 #define UART011_FR_RI		0x100
 #define UART011_FR_TXFE		0x080
 #define UART011_FR_RXFF		0x040
 #define UART01x_FR_TXFF		0x020
 #define UART01x_FR_RXFE		0x010
 #define UART01x_FR_BUSY		0x008
+#define ZX_UART01x_FR_DSR       0x008
 #define UART01x_FR_DCD 		0x004
 #define UART01x_FR_DSR 		0x002
+#define ZX_UART01x_FR_CTS	0x002
 #define UART01x_FR_CTS 		0x001
+#define ZX_UART011_FR_RI	0x001
 #define UART01x_FR_TMSK		(UART01x_FR_TXFF + UART01x_FR_BUSY)
 
 #define UART011_CR_CTSEN	0x8000	/* CTS hardware flow control */
diff --git a/include/linux/atmel_serial.h b/include/linux/atmel_serial.h
index 00beddf6be20..ee696d7e8a43 100644
--- a/include/linux/atmel_serial.h
+++ b/include/linux/atmel_serial.h
@@ -16,115 +16,151 @@
 #ifndef ATMEL_SERIAL_H
 #define ATMEL_SERIAL_H
 
-#define ATMEL_US_CR		0x00			/* Control Register */
-#define		ATMEL_US_RSTRX		(1 <<  2)		/* Reset Receiver */
-#define		ATMEL_US_RSTTX		(1 <<  3)		/* Reset Transmitter */
-#define		ATMEL_US_RXEN		(1 <<  4)		/* Receiver Enable */
-#define		ATMEL_US_RXDIS		(1 <<  5)		/* Receiver Disable */
-#define		ATMEL_US_TXEN		(1 <<  6)		/* Transmitter Enable */
-#define		ATMEL_US_TXDIS		(1 <<  7)		/* Transmitter Disable */
-#define		ATMEL_US_RSTSTA		(1 <<  8)		/* Reset Status Bits */
-#define		ATMEL_US_STTBRK		(1 <<  9)		/* Start Break */
-#define		ATMEL_US_STPBRK		(1 << 10)		/* Stop Break */
-#define		ATMEL_US_STTTO		(1 << 11)		/* Start Time-out */
-#define		ATMEL_US_SENDA		(1 << 12)		/* Send Address */
-#define		ATMEL_US_RSTIT		(1 << 13)		/* Reset Iterations */
-#define		ATMEL_US_RSTNACK	(1 << 14)		/* Reset Non Acknowledge */
-#define		ATMEL_US_RETTO		(1 << 15)		/* Rearm Time-out */
-#define		ATMEL_US_DTREN		(1 << 16)		/* Data Terminal Ready Enable [AT91RM9200 only] */
-#define		ATMEL_US_DTRDIS		(1 << 17)		/* Data Terminal Ready Disable [AT91RM9200 only] */
-#define		ATMEL_US_RTSEN		(1 << 18)		/* Request To Send Enable */
-#define		ATMEL_US_RTSDIS		(1 << 19)		/* Request To Send Disable */
+#define ATMEL_US_CR		0x00	/* Control Register */
+#define	ATMEL_US_RSTRX		BIT(2)	/* Reset Receiver */
+#define	ATMEL_US_RSTTX		BIT(3)	/* Reset Transmitter */
+#define	ATMEL_US_RXEN		BIT(4)	/* Receiver Enable */
+#define	ATMEL_US_RXDIS		BIT(5)	/* Receiver Disable */
+#define	ATMEL_US_TXEN		BIT(6)	/* Transmitter Enable */
+#define	ATMEL_US_TXDIS		BIT(7)	/* Transmitter Disable */
+#define	ATMEL_US_RSTSTA		BIT(8)	/* Reset Status Bits */
+#define	ATMEL_US_STTBRK		BIT(9)	/* Start Break */
+#define	ATMEL_US_STPBRK		BIT(10)	/* Stop Break */
+#define	ATMEL_US_STTTO		BIT(11)	/* Start Time-out */
+#define	ATMEL_US_SENDA		BIT(12)	/* Send Address */
+#define	ATMEL_US_RSTIT		BIT(13)	/* Reset Iterations */
+#define	ATMEL_US_RSTNACK	BIT(14)	/* Reset Non Acknowledge */
+#define	ATMEL_US_RETTO		BIT(15)	/* Rearm Time-out */
+#define	ATMEL_US_DTREN		BIT(16)	/* Data Terminal Ready Enable */
+#define	ATMEL_US_DTRDIS		BIT(17)	/* Data Terminal Ready Disable */
+#define	ATMEL_US_RTSEN		BIT(18)	/* Request To Send Enable */
+#define	ATMEL_US_RTSDIS		BIT(19)	/* Request To Send Disable */
+#define	ATMEL_US_TXFCLR		BIT(24)	/* Transmit FIFO Clear */
+#define	ATMEL_US_RXFCLR		BIT(25)	/* Receive FIFO Clear */
+#define	ATMEL_US_TXFLCLR	BIT(26)	/* Transmit FIFO Lock Clear */
+#define	ATMEL_US_FIFOEN		BIT(30)	/* FIFO enable */
+#define	ATMEL_US_FIFODIS	BIT(31)	/* FIFO disable */
 
-#define ATMEL_US_MR		0x04			/* Mode Register */
-#define		ATMEL_US_USMODE		(0xf <<  0)		/* Mode of the USART */
-#define			ATMEL_US_USMODE_NORMAL		0
-#define			ATMEL_US_USMODE_RS485		1
-#define			ATMEL_US_USMODE_HWHS		2
-#define			ATMEL_US_USMODE_MODEM		3
-#define			ATMEL_US_USMODE_ISO7816_T0	4
-#define			ATMEL_US_USMODE_ISO7816_T1	6
-#define			ATMEL_US_USMODE_IRDA		8
-#define		ATMEL_US_USCLKS		(3   <<  4)		/* Clock Selection */
-#define			ATMEL_US_USCLKS_MCK		(0 <<  4)
-#define			ATMEL_US_USCLKS_MCK_DIV8	(1 <<  4)
-#define			ATMEL_US_USCLKS_SCK		(3 <<  4)
-#define		ATMEL_US_CHRL		(3   <<  6)		/* Character Length */
-#define			ATMEL_US_CHRL_5			(0 <<  6)
-#define			ATMEL_US_CHRL_6			(1 <<  6)
-#define			ATMEL_US_CHRL_7			(2 <<  6)
-#define			ATMEL_US_CHRL_8			(3 <<  6)
-#define		ATMEL_US_SYNC		(1 <<  8)		/* Synchronous Mode Select */
-#define		ATMEL_US_PAR		(7 <<  9)		/* Parity Type */
-#define			ATMEL_US_PAR_EVEN		(0 <<  9)
-#define			ATMEL_US_PAR_ODD		(1 <<  9)
-#define			ATMEL_US_PAR_SPACE		(2 <<  9)
-#define			ATMEL_US_PAR_MARK		(3 <<  9)
-#define			ATMEL_US_PAR_NONE		(4 <<  9)
-#define			ATMEL_US_PAR_MULTI_DROP		(6 <<  9)
-#define		ATMEL_US_NBSTOP		(3 << 12)		/* Number of Stop Bits */
-#define			ATMEL_US_NBSTOP_1		(0 << 12)
-#define			ATMEL_US_NBSTOP_1_5		(1 << 12)
-#define			ATMEL_US_NBSTOP_2		(2 << 12)
-#define		ATMEL_US_CHMODE		(3 << 14)		/* Channel Mode */
-#define			ATMEL_US_CHMODE_NORMAL		(0 << 14)
-#define			ATMEL_US_CHMODE_ECHO		(1 << 14)
-#define			ATMEL_US_CHMODE_LOC_LOOP	(2 << 14)
-#define			ATMEL_US_CHMODE_REM_LOOP	(3 << 14)
-#define		ATMEL_US_MSBF		(1 << 16)		/* Bit Order */
-#define		ATMEL_US_MODE9		(1 << 17)		/* 9-bit Character Length */
-#define		ATMEL_US_CLKO		(1 << 18)		/* Clock Output Select */
-#define		ATMEL_US_OVER		(1 << 19)		/* Oversampling Mode */
-#define		ATMEL_US_INACK		(1 << 20)		/* Inhibit Non Acknowledge */
-#define		ATMEL_US_DSNACK		(1 << 21)		/* Disable Successive NACK */
-#define		ATMEL_US_MAX_ITER	(7 << 24)		/* Max Iterations */
-#define		ATMEL_US_FILTER		(1 << 28)		/* Infrared Receive Line Filter */
+#define ATMEL_US_MR		0x04	/* Mode Register */
+#define	ATMEL_US_USMODE		GENMASK(3, 0)	/* Mode of the USART */
+#define		ATMEL_US_USMODE_NORMAL		0
+#define		ATMEL_US_USMODE_RS485		1
+#define		ATMEL_US_USMODE_HWHS		2
+#define		ATMEL_US_USMODE_MODEM		3
+#define		ATMEL_US_USMODE_ISO7816_T0	4
+#define		ATMEL_US_USMODE_ISO7816_T1	6
+#define		ATMEL_US_USMODE_IRDA		8
+#define	ATMEL_US_USCLKS		GENMASK(5, 4)	/* Clock Selection */
+#define		ATMEL_US_USCLKS_MCK		(0 <<  4)
+#define		ATMEL_US_USCLKS_MCK_DIV8	(1 <<  4)
+#define		ATMEL_US_USCLKS_SCK		(3 <<  4)
+#define	ATMEL_US_CHRL		GENMASK(7, 6)	/* Character Length */
+#define		ATMEL_US_CHRL_5			(0 <<  6)
+#define		ATMEL_US_CHRL_6			(1 <<  6)
+#define		ATMEL_US_CHRL_7			(2 <<  6)
+#define		ATMEL_US_CHRL_8			(3 <<  6)
+#define	ATMEL_US_SYNC		BIT(8)		/* Synchronous Mode Select */
+#define	ATMEL_US_PAR		GENMASK(11, 9)	/* Parity Type */
+#define		ATMEL_US_PAR_EVEN		(0 <<  9)
+#define		ATMEL_US_PAR_ODD		(1 <<  9)
+#define		ATMEL_US_PAR_SPACE		(2 <<  9)
+#define		ATMEL_US_PAR_MARK		(3 <<  9)
+#define		ATMEL_US_PAR_NONE		(4 <<  9)
+#define		ATMEL_US_PAR_MULTI_DROP		(6 <<  9)
+#define	ATMEL_US_NBSTOP		GENMASK(13, 12)	/* Number of Stop Bits */
+#define		ATMEL_US_NBSTOP_1		(0 << 12)
+#define		ATMEL_US_NBSTOP_1_5		(1 << 12)
+#define		ATMEL_US_NBSTOP_2		(2 << 12)
+#define	ATMEL_US_CHMODE		GENMASK(15, 14)	/* Channel Mode */
+#define		ATMEL_US_CHMODE_NORMAL		(0 << 14)
+#define		ATMEL_US_CHMODE_ECHO		(1 << 14)
+#define		ATMEL_US_CHMODE_LOC_LOOP	(2 << 14)
+#define		ATMEL_US_CHMODE_REM_LOOP	(3 << 14)
+#define	ATMEL_US_MSBF		BIT(16)	/* Bit Order */
+#define	ATMEL_US_MODE9		BIT(17)	/* 9-bit Character Length */
+#define	ATMEL_US_CLKO		BIT(18)	/* Clock Output Select */
+#define	ATMEL_US_OVER		BIT(19)	/* Oversampling Mode */
+#define	ATMEL_US_INACK		BIT(20)	/* Inhibit Non Acknowledge */
+#define	ATMEL_US_DSNACK		BIT(21)	/* Disable Successive NACK */
+#define	ATMEL_US_MAX_ITER	GENMASK(26, 24)	/* Max Iterations */
+#define	ATMEL_US_FILTER		BIT(28)	/* Infrared Receive Line Filter */
 
-#define ATMEL_US_IER		0x08			/* Interrupt Enable Register */
-#define		ATMEL_US_RXRDY		(1 <<  0)		/* Receiver Ready */
-#define		ATMEL_US_TXRDY		(1 <<  1)		/* Transmitter Ready */
-#define		ATMEL_US_RXBRK		(1 <<  2)		/* Break Received / End of Break */
-#define		ATMEL_US_ENDRX		(1 <<  3)		/* End of Receiver Transfer */
-#define		ATMEL_US_ENDTX		(1 <<  4)		/* End of Transmitter Transfer */
-#define		ATMEL_US_OVRE		(1 <<  5)		/* Overrun Error */
-#define		ATMEL_US_FRAME		(1 <<  6)		/* Framing Error */
-#define		ATMEL_US_PARE		(1 <<  7)		/* Parity Error */
-#define		ATMEL_US_TIMEOUT	(1 <<  8)		/* Receiver Time-out */
-#define		ATMEL_US_TXEMPTY	(1 <<  9)		/* Transmitter Empty */
-#define		ATMEL_US_ITERATION	(1 << 10)		/* Max number of Repetitions Reached */
-#define		ATMEL_US_TXBUFE		(1 << 11)		/* Transmission Buffer Empty */
-#define		ATMEL_US_RXBUFF		(1 << 12)		/* Reception Buffer Full */
-#define		ATMEL_US_NACK		(1 << 13)		/* Non Acknowledge */
-#define		ATMEL_US_RIIC		(1 << 16)		/* Ring Indicator Input Change [AT91RM9200 only] */
-#define		ATMEL_US_DSRIC		(1 << 17)		/* Data Set Ready Input Change [AT91RM9200 only] */
-#define		ATMEL_US_DCDIC		(1 << 18)		/* Data Carrier Detect Input Change [AT91RM9200 only] */
-#define		ATMEL_US_CTSIC		(1 << 19)		/* Clear to Send Input Change */
-#define		ATMEL_US_RI		(1 << 20)		/* RI */
-#define		ATMEL_US_DSR		(1 << 21)		/* DSR */
-#define		ATMEL_US_DCD		(1 << 22)		/* DCD */
-#define		ATMEL_US_CTS		(1 << 23)		/* CTS */
+#define ATMEL_US_IER		0x08	/* Interrupt Enable Register */
+#define	ATMEL_US_RXRDY		BIT(0)	/* Receiver Ready */
+#define	ATMEL_US_TXRDY		BIT(1)	/* Transmitter Ready */
+#define	ATMEL_US_RXBRK		BIT(2)	/* Break Received / End of Break */
+#define	ATMEL_US_ENDRX		BIT(3)	/* End of Receiver Transfer */
+#define	ATMEL_US_ENDTX		BIT(4)	/* End of Transmitter Transfer */
+#define	ATMEL_US_OVRE		BIT(5)	/* Overrun Error */
+#define	ATMEL_US_FRAME		BIT(6)	/* Framing Error */
+#define	ATMEL_US_PARE		BIT(7)	/* Parity Error */
+#define	ATMEL_US_TIMEOUT	BIT(8)	/* Receiver Time-out */
+#define	ATMEL_US_TXEMPTY	BIT(9)	/* Transmitter Empty */
+#define	ATMEL_US_ITERATION	BIT(10)	/* Max number of Repetitions Reached */
+#define	ATMEL_US_TXBUFE		BIT(11)	/* Transmission Buffer Empty */
+#define	ATMEL_US_RXBUFF		BIT(12)	/* Reception Buffer Full */
+#define	ATMEL_US_NACK		BIT(13)	/* Non Acknowledge */
+#define	ATMEL_US_RIIC		BIT(16)	/* Ring Indicator Input Change */
+#define	ATMEL_US_DSRIC		BIT(17)	/* Data Set Ready Input Change */
+#define	ATMEL_US_DCDIC		BIT(18)	/* Data Carrier Detect Input Change */
+#define	ATMEL_US_CTSIC		BIT(19)	/* Clear to Send Input Change */
+#define	ATMEL_US_RI		BIT(20)	/* RI */
+#define	ATMEL_US_DSR		BIT(21)	/* DSR */
+#define	ATMEL_US_DCD		BIT(22)	/* DCD */
+#define	ATMEL_US_CTS		BIT(23)	/* CTS */
 
-#define ATMEL_US_IDR		0x0c			/* Interrupt Disable Register */
-#define ATMEL_US_IMR		0x10			/* Interrupt Mask Register */
-#define ATMEL_US_CSR		0x14			/* Channel Status Register */
-#define ATMEL_US_RHR		0x18			/* Receiver Holding Register */
-#define ATMEL_US_THR		0x1c			/* Transmitter Holding Register */
-#define		ATMEL_US_SYNH		(1 << 15)		/* Transmit/Receive Sync [AT91SAM9261 only] */
+#define ATMEL_US_IDR		0x0c	/* Interrupt Disable Register */
+#define ATMEL_US_IMR		0x10	/* Interrupt Mask Register */
+#define ATMEL_US_CSR		0x14	/* Channel Status Register */
+#define ATMEL_US_RHR		0x18	/* Receiver Holding Register */
+#define ATMEL_US_THR		0x1c	/* Transmitter Holding Register */
+#define	ATMEL_US_SYNH		BIT(15)	/* Transmit/Receive Sync */
 
-#define ATMEL_US_BRGR		0x20			/* Baud Rate Generator Register */
-#define		ATMEL_US_CD		(0xffff << 0)		/* Clock Divider */
+#define ATMEL_US_BRGR		0x20	/* Baud Rate Generator Register */
+#define	ATMEL_US_CD		GENMASK(15, 0)	/* Clock Divider */
 
-#define ATMEL_US_RTOR		0x24			/* Receiver Time-out Register */
-#define		ATMEL_US_TO		(0xffff << 0)		/* Time-out Value */
+#define ATMEL_US_RTOR		0x24	/* Receiver Time-out Register */
+#define	ATMEL_US_TO		GENMASK(15, 0)	/* Time-out Value */
 
-#define ATMEL_US_TTGR		0x28			/* Transmitter Timeguard Register */
-#define		ATMEL_US_TG		(0xff << 0)		/* Timeguard Value */
+#define ATMEL_US_TTGR		0x28	/* Transmitter Timeguard Register */
+#define	ATMEL_US_TG		GENMASK(7, 0)	/* Timeguard Value */
 
-#define ATMEL_US_FIDI		0x40			/* FI DI Ratio Register */
-#define ATMEL_US_NER		0x44			/* Number of Errors Register */
-#define ATMEL_US_IF		0x4c			/* IrDA Filter Register */
+#define ATMEL_US_FIDI		0x40	/* FI DI Ratio Register */
+#define ATMEL_US_NER		0x44	/* Number of Errors Register */
+#define ATMEL_US_IF		0x4c	/* IrDA Filter Register */
 
-#define ATMEL_US_NAME		0xf0			/* Ip Name */
-#define ATMEL_US_VERSION	0xfc			/* Ip Version */
+#define ATMEL_US_CMPR		0x90	/* Comparaison Register */
+#define ATMEL_US_FMR		0xa0	/* FIFO Mode Register */
+#define	ATMEL_US_TXRDYM(data)	(((data) & 0x3) << 0)	/* TX Ready Mode */
+#define	ATMEL_US_RXRDYM(data)	(((data) & 0x3) << 4)	/* RX Ready Mode */
+#define		ATMEL_US_ONE_DATA	0x0
+#define		ATMEL_US_TWO_DATA	0x1
+#define		ATMEL_US_FOUR_DATA	0x2
+#define	ATMEL_US_FRTSC		BIT(7)	/* FIFO RTS pin Control */
+#define	ATMEL_US_TXFTHRES(thr)	(((thr) & 0x3f) << 8)	/* TX FIFO Threshold */
+#define	ATMEL_US_RXFTHRES(thr)	(((thr) & 0x3f) << 16)	/* RX FIFO Threshold */
+#define	ATMEL_US_RXFTHRES2(thr)	(((thr) & 0x3f) << 24)	/* RX FIFO Threshold2 */
+
+#define ATMEL_US_FLR		0xa4	/* FIFO Level Register */
+#define	ATMEL_US_TXFL(reg)	(((reg) >> 0) & 0x3f)	/* TX FIFO Level */
+#define	ATMEL_US_RXFL(reg)	(((reg) >> 16) & 0x3f)	/* RX FIFO Level */
+
+#define ATMEL_US_FIER		0xa8	/* FIFO Interrupt Enable Register */
+#define ATMEL_US_FIDR		0xac	/* FIFO Interrupt Disable Register */
+#define ATMEL_US_FIMR		0xb0	/* FIFO Interrupt Mask Register */
+#define ATMEL_US_FESR		0xb4	/* FIFO Event Status Register */
+#define	ATMEL_US_TXFEF		BIT(0)	/* Transmit FIFO Empty Flag */
+#define	ATMEL_US_TXFFF		BIT(1)	/* Transmit FIFO Full Flag */
+#define	ATMEL_US_TXFTHF		BIT(2)	/* Transmit FIFO Threshold Flag */
+#define	ATMEL_US_RXFEF		BIT(3)	/* Receive FIFO Empty Flag */
+#define	ATMEL_US_RXFFF		BIT(4)	/* Receive FIFO Full Flag */
+#define	ATMEL_US_RXFTHF		BIT(5)	/* Receive FIFO Threshold Flag */
+#define	ATMEL_US_TXFPTEF	BIT(6)	/* Transmit FIFO Pointer Error Flag */
+#define	ATMEL_US_RXFPTEF	BIT(7)	/* Receive FIFO Pointer Error Flag */
+#define	ATMEL_US_TXFLOCK	BIT(8)	/* Transmit FIFO Lock (FESR only) */
+#define	ATMEL_US_RXFTHF2	BIT(9)	/* Receive FIFO Threshold Flag 2 */
+
+#define ATMEL_US_NAME		0xf0	/* Ip Name */
+#define ATMEL_US_VERSION	0xfc	/* Ip Version */
 
 #endif
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index ba82c07feb95..faa0e0370ce7 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -136,8 +136,6 @@ void serial8250_resume_port(int line);
 
 extern int early_serial_setup(struct uart_port *port);
 
-extern unsigned int serial8250_early_in(struct uart_port *port, int offset);
-extern void serial8250_early_out(struct uart_port *port, int offset, int value);
 extern int early_serial8250_setup(struct earlycon_device *device,
 					 const char *options);
 extern void serial8250_do_set_termios(struct uart_port *port,
@@ -152,6 +150,11 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir);
 unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr);
 void serial8250_tx_chars(struct uart_8250_port *up);
 unsigned int serial8250_modem_status(struct uart_8250_port *up);
+void serial8250_init_port(struct uart_8250_port *up);
+void serial8250_set_defaults(struct uart_8250_port *up);
+void serial8250_console_write(struct uart_8250_port *up, const char *s,
+			      unsigned int count);
+int serial8250_console_setup(struct uart_port *port, char *options, bool probe);
 
 extern void serial8250_set_isa_configurator(void (*v)
 					(int port, struct uart_port *up,
diff --git a/include/linux/tty.h b/include/linux/tty.h
index ad6c8913aa3e..d072ded41678 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -709,4 +709,10 @@ static inline void proc_tty_register_driver(struct tty_driver *d) {}
 static inline void proc_tty_unregister_driver(struct tty_driver *d) {}
 #endif
 
+#define tty_debug(tty, f, args...)					\
+	do {								\
+		printk(KERN_DEBUG "%s: %s: " f, __func__,		\
+		       tty_name(tty), ##args);				\
+	} while (0)
+
 #endif
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 92e337c18839..161052477f77 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -296,7 +296,7 @@ struct tty_operations {
 struct tty_driver {
 	int	magic;		/* magic number for this structure */
 	struct kref kref;	/* Reference management */
-	struct cdev *cdevs;
+	struct cdev **cdevs;
 	struct module	*owner;
 	const char	*driver_name;
 	const char	*name;
diff --git a/include/uapi/linux/gsmmux.h b/include/uapi/linux/gsmmux.h
index c06742d52856..ab055d8cddef 100644
--- a/include/uapi/linux/gsmmux.h
+++ b/include/uapi/linux/gsmmux.h
@@ -3,6 +3,7 @@
 
 #include <linux/if.h>
 #include <linux/ioctl.h>
+#include <linux/types.h>
 
 struct gsm_config
 {