Merge tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.10

The first "new features" pull request for v6.10 with changes both in
stack and in drivers. The big thing in this pull request is that
wireless subsystem is now almost free of sparse warnings. There's only
one warning left in ath11k which was introduced in v6.9-rc1 and will
be fixed via the wireless tree.

Realtek drivers continue to improve, now we have support for RTL8922AE
and RTL8723CS devices. ath11k also has long waited support for P2P.

This time we have a small conflict in iwlwifi, Stephen has an example
merge resolution which should help with fixing the conflict:

https://lore.kernel.org/all/20240326100945.765b8caf@canb.auug.org.au/

Major changes:

rtw89
 * RTL8922AE Wi-Fi 7 PCI device support

rtw88
 * RTL8723CS SDIO device support

iwlwifi
 * don't support puncturing in 5 GHz
 * support monitor mode on passive channels
 * BZ-W device support
 * P2P with HE/EHT support

ath11k
 * P2P support for QCA6390, WCN6855 and QCA2066

* tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (122 commits)
  wifi: mt76: mt7915: workaround dubious x | !y warning
  wifi: mwl8k: Avoid -Wflex-array-member-not-at-end warnings
  wifi: ti: Avoid a hundred -Wflex-array-member-not-at-end warnings
  wifi: iwlwifi: mvm: fix check in iwl_mvm_sta_fw_id_mask
  net: rfkill: gpio: Convert to platform remove callback returning void
  wifi: mac80211: use kvcalloc() for codel vars
  wifi: iwlwifi: reconfigure TLC during HW restart
  wifi: iwlwifi: mvm: don't change BA sessions during restart
  wifi: iwlwifi: mvm: select STA mask only for active links
  wifi: iwlwifi: mvm: set wider BW OFDMA ignore correctly
  wifi: iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD cmd v9
  wifi: iwlwifi: mvm: Declare HE/EHT capabilities support for P2P interfaces
  wifi: iwlwifi: mvm: Remove outdated comment
  wifi: iwlwifi: add support for BZ_W
  wifi: iwlwifi: Print a specific device name.
  wifi: iwlwifi: remove wrong CRF_IDs
  wifi: iwlwifi: remove devices that never came out
  wifi: iwlwifi: mvm: mark EMLSR disabled in cleanup iterator
  wifi: iwlwifi: mvm: fix active link counting during recovery
  wifi: iwlwifi: mvm: assign link STA ID lookups during restart
  ...
====================

Link: https://lore.kernel.org/r/20240403093625.CF515C433C7@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

5 files changed, 150 insertions, 129 deletions

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 3385a2cc5b09..7f9b829dcb1e 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -2742,9 +2742,11 @@ static inline bool ieee80211_he_capa_size_ok(const u8 *data, u8 len)
 #define IEEE80211_HE_OPERATION_PARTIAL_BSS_COLOR		0x40000000
 #define IEEE80211_HE_OPERATION_BSS_COLOR_DISABLED		0x80000000
 
-#define IEEE80211_6GHZ_CTRL_REG_LPI_AP	0
-#define IEEE80211_6GHZ_CTRL_REG_SP_AP	1
-#define IEEE80211_6GHZ_CTRL_REG_VLP_AP	2
+#define IEEE80211_6GHZ_CTRL_REG_LPI_AP		0
+#define IEEE80211_6GHZ_CTRL_REG_SP_AP		1
+#define IEEE80211_6GHZ_CTRL_REG_VLP_AP		2
+#define IEEE80211_6GHZ_CTRL_REG_INDOOR_LPI_AP	3
+#define IEEE80211_6GHZ_CTRL_REG_INDOOR_SP_AP	4
 
 /**
  * struct ieee80211_he_6ghz_oper - HE 6 GHz operation Information field
@@ -5166,7 +5168,7 @@ static inline bool ieee80211_mle_size_ok(const u8 *data, size_t len)
 	bool check_common_len = false;
 	u16 control;
 
-	if (len < fixed)
+	if (!data || len < fixed)
 		return false;
 
 	control = le16_to_cpu(mle->control);
@@ -5302,7 +5304,7 @@ static inline bool ieee80211_mle_basic_sta_prof_size_ok(const u8 *data,
 		info_len += 1;
 
 	return prof->sta_info_len >= info_len &&
-	       fixed + prof->sta_info_len <= len;
+	       fixed + prof->sta_info_len - 1 <= len;
 }
 
 /**
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
index 7fada7a714fe..7cddfdac2f57 100644
--- a/include/linux/mmc/sdio_ids.h
+++ b/include/linux/mmc/sdio_ids.h
@@ -124,6 +124,7 @@
 #define SDIO_DEVICE_ID_REALTEK_RTW8723DS_2ANT	0xd723
 #define SDIO_DEVICE_ID_REALTEK_RTW8723DS_1ANT	0xd724
 #define SDIO_DEVICE_ID_REALTEK_RTW8821DS	0xd821
+#define SDIO_DEVICE_ID_REALTEK_RTW8723CS	0xb703
 
 #define SDIO_VENDOR_ID_SIANO			0x039a
 #define SDIO_DEVICE_ID_SIANO_NOVA_B0		0x0201
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 1f326da289d3..a2257380c3f1 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -621,14 +621,6 @@ extern u32 ssb_dma_translation(struct ssb_device *dev);
 #define SSB_DMA_TRANSLATION_MASK	0xC0000000
 #define SSB_DMA_TRANSLATION_SHIFT	30
 
-static inline void __cold __ssb_dma_not_implemented(struct ssb_device *dev)
-{
-#ifdef CONFIG_SSB_DEBUG
-	printk(KERN_ERR "SSB: BUG! Calling DMA API for "
-	       "unsupported bustype %d\n", dev->bus->bustype);
-#endif /* DEBUG */
-}
-
 #ifdef CONFIG_SSB_PCIHOST
 /* PCI-host wrapper driver */
 extern int ssb_pcihost_register(struct pci_driver *driver);
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 353488ab94a2..f57c29de3a91 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -361,7 +361,7 @@ struct ieee80211_vif_chanctx_switch {
  * @BSS_CHANGED_UNSOL_BCAST_PROBE_RESP: Unsolicited broadcast probe response
  *	status changed.
  * @BSS_CHANGED_MLD_VALID_LINKS: MLD valid links status changed.
- * @BSS_CHANGED_MLD_TTLM: TID to link mapping was changed
+ * @BSS_CHANGED_MLD_TTLM: negotiated TID to link mapping was changed
  */
 enum ieee80211_bss_change {
 	BSS_CHANGED_ASSOC		= 1<<0,
@@ -1921,10 +1921,12 @@ enum ieee80211_neg_ttlm_res {
  * @active_links: The bitmap of active links, or 0 for non-MLO.
  *	The driver shouldn't change this directly, but use the
  *	API calls meant for that purpose.
- * @dormant_links: bitmap of valid but disabled links, or 0 for non-MLO.
- *	Must be a subset of valid_links.
+ * @dormant_links: subset of the valid links that are disabled/suspended
+ *	due to advertised or negotiated TTLM respectively.
+ *	0 for non-MLO.
  * @suspended_links: subset of dormant_links representing links that are
- *	suspended.
+ *	suspended due to negotiated TTLM, and could be activated in the
+ *	future by tearing down the TTLM negotiation.
  *	0 for non-MLO.
  * @neg_ttlm: negotiated TID to link mapping info.
  *	see &struct ieee80211_neg_ttlm.
@@ -2777,6 +2779,8 @@ struct ieee80211_txq {
  *
  * @IEEE80211_HW_DISALLOW_PUNCTURING: HW requires disabling puncturing in EHT
  *	and connecting with a lower bandwidth instead
+ * @IEEE80211_HW_DISALLOW_PUNCTURING_5GHZ: HW requires disabling puncturing in
+ *	EHT in 5 GHz and connecting with a lower bandwidth instead
  *
  * @IEEE80211_HW_HANDLES_QUIET_CSA: HW/driver handles quieting for CSA, so
  *	no need to stop queues. This really should be set by a driver that
@@ -2841,6 +2845,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_DETECTS_COLOR_COLLISION,
 	IEEE80211_HW_MLO_MCAST_MULTI_LINK_TX,
 	IEEE80211_HW_DISALLOW_PUNCTURING,
+	IEEE80211_HW_DISALLOW_PUNCTURING_5GHZ,
 	IEEE80211_HW_HANDLES_QUIET_CSA,
 
 	/* keep last, obviously */
@@ -7586,6 +7591,15 @@ int ieee80211_set_active_links(struct ieee80211_vif *vif, u16 active_links);
 void ieee80211_set_active_links_async(struct ieee80211_vif *vif,
 				      u16 active_links);
 
+/**
+ * ieee80211_send_teardown_neg_ttlm - tear down a negotiated TTLM request
+ * @vif: the interface on which the tear down request should be sent.
+ *
+ * This function can be used to tear down a previously accepted negotiated
+ * TTLM request.
+ */
+void ieee80211_send_teardown_neg_ttlm(struct ieee80211_vif *vif);
+
 /* for older drivers - let's not document these ... */
 int ieee80211_emulate_add_chanctx(struct ieee80211_hw *hw,
 				  struct ieee80211_chanctx_conf *ctx);
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index f23ecbdd84a2..f917bc6c9b6f 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -413,8 +413,8 @@
  *	are like for %NL80211_CMD_SET_BEACON, and additionally parameters that
  *	do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL,
  *	%NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID,
- *	%NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
- *	%NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
+ *	%NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
+ *	%NL80211_ATTR_CIPHER_SUITE_GROUP, %NL80211_ATTR_WPA_VERSIONS,
  *	%NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
  *	%NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
  *	%NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
@@ -442,20 +442,15 @@
  *	stations connected and using at least that link as one of its links.
  *
  * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
- * 	destination %NL80211_ATTR_MAC on the interface identified by
- * 	%NL80211_ATTR_IFINDEX.
+ *	destination %NL80211_ATTR_MAC on the interface identified by
+ *	%NL80211_ATTR_IFINDEX.
  * @NL80211_CMD_SET_MPATH:  Set mesh path attributes for mesh path to
- * 	destination %NL80211_ATTR_MAC on the interface identified by
- * 	%NL80211_ATTR_IFINDEX.
+ *	destination %NL80211_ATTR_MAC on the interface identified by
+ *	%NL80211_ATTR_IFINDEX.
  * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
  *	%NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
  * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
  *	%NL80211_ATTR_MAC.
- * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
- *	interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
- *	or, if no MAC address given, all mesh paths, on the interface identified
- *	by %NL80211_ATTR_IFINDEX.
  * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
  *	%NL80211_ATTR_IFINDEX.
  *
@@ -476,15 +471,15 @@
  *	after being queried by the kernel. CRDA replies by sending a regulatory
  *	domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
  *	current alpha2 if it found a match. It also provides
- * 	NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
- * 	regulatory rule is a nested set of attributes  given by
- * 	%NL80211_ATTR_REG_RULE_FREQ_[START|END] and
- * 	%NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
- * 	%NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
- * 	%NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
+ *	NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
+ *	regulatory rule is a nested set of attributes  given by
+ *	%NL80211_ATTR_REG_RULE_FREQ_[START|END] and
+ *	%NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
+ *	%NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
+ *	%NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
  * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
- * 	to the specified ISO/IEC 3166-1 alpha2 country code. The core will
- * 	store this as a valid request and then query userspace for it.
+ *	to the specified ISO/IEC 3166-1 alpha2 country code. The core will
+ *	store this as a valid request and then query userspace for it.
  *
  * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the
  *	interface identified by %NL80211_ATTR_IFINDEX
@@ -574,31 +569,31 @@
  * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
  *
  * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
- * 	has been changed and provides details of the request information
- * 	that caused the change such as who initiated the regulatory request
- * 	(%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
- * 	(%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
- * 	the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
- * 	%NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
- * 	set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
- * 	%NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
- * 	to (%NL80211_ATTR_REG_ALPHA2).
+ *	has been changed and provides details of the request information
+ *	that caused the change such as who initiated the regulatory request
+ *	(%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
+ *	(%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
+ *	the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
+ *	%NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
+ *	set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
+ *	%NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
+ *	to (%NL80211_ATTR_REG_ALPHA2).
  * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon
- * 	has been found while world roaming thus enabling active scan or
- * 	any mode of operation that initiates TX (beacons) on a channel
- * 	where we would not have been able to do either before. As an example
- * 	if you are world roaming (regulatory domain set to world or if your
- * 	driver is using a custom world roaming regulatory domain) and while
- * 	doing a passive scan on the 5 GHz band you find an AP there (if not
- * 	on a DFS channel) you will now be able to actively scan for that AP
- * 	or use AP mode on your card on that same channel. Note that this will
- * 	never be used for channels 1-11 on the 2 GHz band as they are always
- * 	enabled world wide. This beacon hint is only sent if your device had
- * 	either disabled active scanning or beaconing on a channel. We send to
- * 	userspace the wiphy on which we removed a restriction from
- * 	(%NL80211_ATTR_WIPHY) and the channel on which this occurred
- * 	before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
- * 	the beacon hint was processed.
+ *	has been found while world roaming thus enabling active scan or
+ *	any mode of operation that initiates TX (beacons) on a channel
+ *	where we would not have been able to do either before. As an example
+ *	if you are world roaming (regulatory domain set to world or if your
+ *	driver is using a custom world roaming regulatory domain) and while
+ *	doing a passive scan on the 5 GHz band you find an AP there (if not
+ *	on a DFS channel) you will now be able to actively scan for that AP
+ *	or use AP mode on your card on that same channel. Note that this will
+ *	never be used for channels 1-11 on the 2 GHz band as they are always
+ *	enabled world wide. This beacon hint is only sent if your device had
+ *	either disabled active scanning or beaconing on a channel. We send to
+ *	userspace the wiphy on which we removed a restriction from
+ *	(%NL80211_ATTR_WIPHY) and the channel on which this occurred
+ *	before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
+ *	the beacon hint was processed.
  *
  * @NL80211_CMD_AUTHENTICATE: authentication request and notification.
  *	This command is used both as a command (request to authenticate) and
@@ -1120,7 +1115,7 @@
  *	current configuration is not changed.  If it is present but
  *	set to zero, the configuration is changed to don't-care
  *	(i.e. the device can decide what to do).
- * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported.
+ * @NL80211_CMD_NAN_MATCH: Notification sent when a match is reported.
  *	This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
  *	%NL80211_ATTR_COOKIE.
  *
@@ -1715,21 +1710,21 @@ enum nl80211_commands {
  *	(see &enum nl80211_plink_action).
  * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
  * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
- * 	info given for %NL80211_CMD_GET_MPATH, nested attribute described at
+ *	info given for %NL80211_CMD_GET_MPATH, nested attribute described at
  *	&enum nl80211_mpath_info.
  *
  * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
  *      &enum nl80211_mntr_flags.
  *
  * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
- * 	current regulatory domain should be set to or is already set to.
- * 	For example, 'CR', for Costa Rica. This attribute is used by the kernel
- * 	to query the CRDA to retrieve one regulatory domain. This attribute can
- * 	also be used by userspace to query the kernel for the currently set
- * 	regulatory domain. We chose an alpha2 as that is also used by the
- * 	IEEE-802.11 country information element to identify a country.
- * 	Users can also simply ask the wireless core to set regulatory domain
- * 	to a specific alpha2.
+ *	current regulatory domain should be set to or is already set to.
+ *	For example, 'CR', for Costa Rica. This attribute is used by the kernel
+ *	to query the CRDA to retrieve one regulatory domain. This attribute can
+ *	also be used by userspace to query the kernel for the currently set
+ *	regulatory domain. We chose an alpha2 as that is also used by the
+ *	IEEE-802.11 country information element to identify a country.
+ *	Users can also simply ask the wireless core to set regulatory domain
+ *	to a specific alpha2.
  * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
  *	rules.
  *
@@ -1772,9 +1767,9 @@ enum nl80211_commands {
  * @NL80211_ATTR_BSS: scan result BSS
  *
  * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
- * 	currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
+ *	currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
  * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
- * 	set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
+ *	set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
  *
  * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
  *	an array of command numbers (i.e. a mapping index to command number)
@@ -1793,15 +1788,15 @@ enum nl80211_commands {
  *	a u32
  *
  * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change
- * 	due to considerations from a beacon hint. This attribute reflects
- * 	the state of the channel _before_ the beacon hint processing. This
- * 	attributes consists of a nested attribute containing
- * 	NL80211_FREQUENCY_ATTR_*
+ *	due to considerations from a beacon hint. This attribute reflects
+ *	the state of the channel _before_ the beacon hint processing. This
+ *	attributes consists of a nested attribute containing
+ *	NL80211_FREQUENCY_ATTR_*
  * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change
- * 	due to considerations from a beacon hint. This attribute reflects
- * 	the state of the channel _after_ the beacon hint processing. This
- * 	attributes consists of a nested attribute containing
- * 	NL80211_FREQUENCY_ATTR_*
+ *	due to considerations from a beacon hint. This attribute reflects
+ *	the state of the channel _after_ the beacon hint processing. This
+ *	attributes consists of a nested attribute containing
+ *	NL80211_FREQUENCY_ATTR_*
  *
  * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
  *	cipher suites
@@ -1862,12 +1857,6 @@ enum nl80211_commands {
  *	that protected APs should be used. This is also used with NEW_BEACON to
  *	indicate that the BSS is to use protection.
  *
- * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON
- *	to indicate which unicast key ciphers will be used with the connection
- *	(an array of u32).
- * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
- *	indicate which group key cipher will be used with the connection (a
- *	u32).
  * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
  *	indicate which WPA version(s) the AP we want to associate with is using
  *	(a u32 with flags from &enum nl80211_wpa_versions).
@@ -1898,6 +1887,7 @@ enum nl80211_commands {
  *	with %NL80211_KEY_* sub-attributes
  *
  * @NL80211_ATTR_PID: Process ID of a network namespace.
+ * @NL80211_ATTR_NETNS_FD: File descriptor of a network namespace.
  *
  * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
  *	dumps. This number increases whenever the object list being
@@ -1952,6 +1942,7 @@ enum nl80211_commands {
  *
  * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
  *	acknowledged by the recipient.
+ * @NL80211_ATTR_ACK_SIGNAL: Station's ack signal strength (s32)
  *
  * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values.
  *
@@ -2149,6 +2140,9 @@ enum nl80211_commands {
  * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable
  *      this feature during association. This is a flag attribute.
  *	Currently only supported in mac80211 drivers.
+ * @NL80211_ATTR_DISABLE_EHT: Force EHT capable interfaces to disable
+ *      this feature during association. This is a flag attribute.
+ *	Currently only supported in mac80211 drivers.
  * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
  *      ATTR_HT_CAPABILITY to which attention should be paid.
  *      Currently, only mac80211 NICs support this feature.
@@ -2158,6 +2152,12 @@ enum nl80211_commands {
  *      All values are treated as suggestions and may be ignored
  *      by the driver as required.  The actual values may be seen in
  *      the station debugfs ht_caps file.
+ * @NL80211_ATTR_VHT_CAPABILITY_MASK: Specify which bits of the
+ *      ATTR_VHT_CAPABILITY to which attention should be paid.
+ *      Currently, only mac80211 NICs support this feature.
+ *      All values are treated as suggestions and may be ignored
+ *      by the driver as required.  The actual values may be seen in
+ *      the station debugfs vht_caps file.
  *
  * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country
  *    abides to when initiating radiation on DFS channels. A country maps
@@ -2416,7 +2416,7 @@ enum nl80211_commands {
  *	scheduled scan is started.  Or the delay before a WoWLAN
  *	net-detect scan is started, counting from the moment the
  *	system is suspended.  This value is a u32, in seconds.
-
+ *
  * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
  *      is operating in an indoor environment.
  *
@@ -3565,7 +3565,7 @@ enum nl80211_sta_flags {
  * enum nl80211_sta_p2p_ps_status - station support of P2P PS
  *
  * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism
- * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism
+ * @NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism
  * @NUM_NL80211_P2P_PS_STATUS: number of values
  */
 enum nl80211_sta_p2p_ps_status {
@@ -3603,9 +3603,9 @@ enum nl80211_he_gi {
 
 /**
  * enum nl80211_he_ltf - HE long training field
- * @NL80211_RATE_INFO_HE_1xLTF: 3.2 usec
- * @NL80211_RATE_INFO_HE_2xLTF: 6.4 usec
- * @NL80211_RATE_INFO_HE_4xLTF: 12.8 usec
+ * @NL80211_RATE_INFO_HE_1XLTF: 3.2 usec
+ * @NL80211_RATE_INFO_HE_2XLTF: 6.4 usec
+ * @NL80211_RATE_INFO_HE_4XLTF: 12.8 usec
  */
 enum nl80211_he_ltf {
 	NL80211_RATE_INFO_HE_1XLTF,
@@ -3720,7 +3720,7 @@ enum nl80211_eht_ru_alloc {
  * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier
  *	(u8, see &enum nl80211_he_gi)
  * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1)
- * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then
+ * @NL80211_RATE_INFO_HE_RU_ALLOC: HE RU allocation, if not present then
  *	non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc)
  * @NL80211_RATE_INFO_320_MHZ_WIDTH: 320 MHz bitrate
  * @NL80211_RATE_INFO_EHT_MCS: EHT MCS index (u8, 0-15)
@@ -3823,7 +3823,7 @@ enum nl80211_sta_bss_param {
  *	(u64, to this station)
  * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
  * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
- * 	containing info as possible, see &enum nl80211_rate_info
+ *	containing info as possible, see &enum nl80211_rate_info
  * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs)
  *	(u32, from this station)
  * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs)
@@ -3852,8 +3852,8 @@ enum nl80211_sta_bss_param {
  *	Contains a nested array of signal strength attributes (u8, dBm)
  * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
  *	Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
- * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the
- *	802.11 header (u32, kbps)
+ * @NL80211_STA_INFO_EXPECTED_THROUGHPUT: expected throughput considering also
+ *	the 802.11 header (u32, kbps)
  * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons
  *	(u64)
  * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64)
@@ -4039,7 +4039,7 @@ enum nl80211_mpath_flags {
  * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path
  * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now
  * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in
- * 	&enum nl80211_mpath_flags;
+ *	&enum nl80211_mpath_flags;
  * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
  * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
  * @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination
@@ -4179,7 +4179,7 @@ enum nl80211_band_attr {
  * @NL80211_WMMR_CW_MAX: Maximum contention window slot.
  * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space.
  * @NL80211_WMMR_TXOP: Maximum allowed tx operation time.
- * @nl80211_WMMR_MAX: highest possible wmm rule.
+ * @NL80211_WMMR_MAX: highest possible wmm rule.
  * @__NL80211_WMMR_LAST: Internal use.
  */
 enum nl80211_wmm_rule {
@@ -4201,8 +4201,9 @@ enum nl80211_wmm_rule {
  * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
  *	regulatory domain.
  * @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation
- * 	are permitted on this channel, this includes sending probe
- * 	requests, or modes of operation that require beaconing.
+ *	are permitted on this channel, this includes sending probe
+ *	requests, or modes of operation that require beaconing.
+ * @__NL80211_FREQUENCY_ATTR_NO_IBSS: obsolete, same as _NO_IR
  * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
  *	on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
@@ -4357,16 +4358,16 @@ enum nl80211_bitrate_attr {
 };
 
 /**
- * enum nl80211_initiator - Indicates the initiator of a reg domain request
+ * enum nl80211_reg_initiator - Indicates the initiator of a reg domain request
  * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
- * 	regulatory domain.
+ *	regulatory domain.
  * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
- * 	regulatory domain.
+ *	regulatory domain.
  * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the
- * 	wireless core it thinks its knows the regulatory domain we should be in.
+ *	wireless core it thinks its knows the regulatory domain we should be in.
  * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
- * 	802.11 country information element with regulatory information it
- * 	thinks we should consider. cfg80211 only processes the country
+ *	802.11 country information element with regulatory information it
+ *	thinks we should consider. cfg80211 only processes the country
  *	code from the IE, and relies on the regulatory domain information
  *	structure passed by userspace (CRDA) from our wireless-regdb.
  *	If a channel is enabled but the country code indicates it should
@@ -4385,11 +4386,11 @@ enum nl80211_reg_initiator {
  *	to a specific country. When this is set you can count on the
  *	ISO / IEC 3166 alpha2 country code being valid.
  * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory
- * 	domain.
+ *	domain.
  * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom
- * 	driver specific world regulatory domain. These do not apply system-wide
- * 	and are only applicable to the individual devices which have requested
- * 	them to be applied.
+ *	driver specific world regulatory domain. These do not apply system-wide
+ *	and are only applicable to the individual devices which have requested
+ *	them to be applied.
  * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product
  *	of an intersection between two regulatory domains -- the previously
  *	set regulatory domain on the system and the last accepted regulatory
@@ -4406,21 +4407,21 @@ enum nl80211_reg_type {
  * enum nl80211_reg_rule_attr - regulatory rule attributes
  * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
  * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
- * 	considerations for a given frequency range. These are the
- * 	&enum nl80211_reg_rule_flags.
+ *	considerations for a given frequency range. These are the
+ *	&enum nl80211_reg_rule_flags.
  * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
- * 	rule in KHz. This is not a center of frequency but an actual regulatory
- * 	band edge.
+ *	rule in KHz. This is not a center of frequency but an actual regulatory
+ *	band edge.
  * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
- * 	in KHz. This is not a center a frequency but an actual regulatory
- * 	band edge.
+ *	in KHz. This is not a center a frequency but an actual regulatory
+ *	band edge.
  * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
  *	frequency range, in KHz.
  * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
- * 	for a given frequency range. The value is in mBi (100 * dBi).
- * 	If you don't have one then don't send this.
+ *	for a given frequency range. The value is in mBi (100 * dBi).
+ *	If you don't have one then don't send this.
  * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
- * 	a given frequency range. The value is in mBm (100 * dBm).
+ *	a given frequency range. The value is in mBm (100 * dBm).
  * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
  *	If not present or 0 default CAC time will be used.
  * @NL80211_ATTR_POWER_RULE_PSD: power spectral density (in dBm).
@@ -4507,8 +4508,9 @@ enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
  * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
  * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
- * 	this includes probe requests or modes of operation that require
- * 	beaconing.
+ *	this includes probe requests or modes of operation that require
+ *	beaconing.
+ * @__NL80211_RRF_NO_IBSS: obsolete, same as NO_IR
  * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
  *	base on contiguous rules and wider channels will be allowed to cross
  *	multiple contiguous/overlapping frequency ranges.
@@ -4522,9 +4524,9 @@ enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_NO_EHT: EHT operation not allowed
  * @NL80211_RRF_PSD: Ruleset has power spectral density value
  * @NL80211_RRF_DFS_CONCURRENT: Operation on this channel is allowed for
-	peer-to-peer or adhoc communication under the control of a DFS master
-	which operates on the same channel (FCC-594280 D01 Section B.3).
-	Should be used together with %NL80211_RRF_DFS only.
+ *	peer-to-peer or adhoc communication under the control of a DFS master
+ *	which operates on the same channel (FCC-594280 D01 Section B.3).
+ *	Should be used together with %NL80211_RRF_DFS only.
  * @NL80211_RRF_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP not allowed
  * @NL80211_RRF_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP not allowed
  */
@@ -4707,8 +4709,8 @@ enum nl80211_mntr_flags {
  *	alternate between Active and Doze states, but may not wake up
  *	for neighbor's beacons.
  *
- * @__NL80211_MESH_POWER_AFTER_LAST - internal use
- * @NL80211_MESH_POWER_MAX - highest possible power save level
+ * @__NL80211_MESH_POWER_AFTER_LAST: internal use
+ * @NL80211_MESH_POWER_MAX: highest possible power save level
  */
 
 enum nl80211_mesh_power_mode {
@@ -5728,7 +5730,7 @@ struct nl80211_pattern_support {
  *	"TCP connection wakeup" for more details. This is a nested attribute
  *	containing the exact information for establishing and keeping alive
  *	the TCP connection.
- * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the
+ * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH: For wakeup reporting only, the
  *	wakeup packet was received on the TCP connection
  * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the
  *	TCP connection was lost or failed to be established
@@ -6077,7 +6079,7 @@ enum nl80211_plink_state {
  * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer
  * @NUM_NL80211_PLINK_ACTIONS: number of possible actions
  */
-enum plink_actions {
+enum nl80211_plink_action {
 	NL80211_PLINK_ACTION_NO_ACTION,
 	NL80211_PLINK_ACTION_OPEN,
 	NL80211_PLINK_ACTION_BLOCK,
@@ -6404,6 +6406,7 @@ enum nl80211_feature_flags {
  *	receiving control port frames over nl80211 instead of the netdevice.
  * @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports
  *	(average) ACK signal strength reporting.
+ * @NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT: Backward-compatible ID
  * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate
  *      TXQs.
  * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the
@@ -6787,6 +6790,8 @@ enum nl80211_acl_policy {
  * @NL80211_SMPS_STATIC: static SMPS (use a single antenna)
  * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and
  *	turn on other antennas after CTS/RTS).
+ * @__NL80211_SMPS_AFTER_LAST: internal
+ * @NL80211_SMPS_MAX: highest used enumeration
  */
 enum nl80211_smps_mode {
 	NL80211_SMPS_OFF,
@@ -7008,6 +7013,8 @@ enum nl80211_bss_select_attr {
  * @NL80211_NAN_FUNC_PUBLISH: function is publish
  * @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe
  * @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up
+ * @__NL80211_NAN_FUNC_TYPE_AFTER_LAST: internal use
+ * @NL80211_NAN_FUNC_MAX_TYPE: internal use
  */
 enum nl80211_nan_function_type {
 	NL80211_NAN_FUNC_PUBLISH,
@@ -7168,7 +7175,7 @@ enum nl80211_nan_match_attributes {
 };
 
 /**
- * nl80211_external_auth_action - Action to perform with external
+ * enum nl80211_external_auth_action - Action to perform with external
  *     authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION.
  * @NL80211_EXTERNAL_AUTH_START: Start the authentication.
  * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication.
@@ -7186,7 +7193,7 @@ enum nl80211_external_auth_action {
  * @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element
  *	(9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10),
  *	i.e. starting with the measurement token
- * @NL80211_FTM_RESP_ATTR_CIVIC: The content of Measurement Report Element
+ * @NL80211_FTM_RESP_ATTR_CIVICLOC: The content of Measurement Report Element
  *	(9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13),
  *	i.e. starting with the measurement token
  * @__NL80211_FTM_RESP_ATTR_LAST: Internal
@@ -7829,6 +7836,7 @@ enum nl80211_sae_pwe_mechanism {
  *
  * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit
  *
+ * @NUM_NL80211_SAR_TYPE: internal
  */
 enum nl80211_sar_type {
 	NL80211_SAR_TYPE_POWER,
@@ -7842,6 +7850,8 @@ enum nl80211_sar_type {
 /**
  * enum nl80211_sar_attrs - Attributes for SAR spec
  *
+ * @__NL80211_SAR_ATTR_INVALID: Invalid
+ *
  * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type.
  *
  * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power
@@ -7873,6 +7883,8 @@ enum nl80211_sar_attrs {
 /**
  * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs
  *
+ * @__NL80211_SAR_ATTR_SPECS_INVALID: Invalid
+ *
  * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual
  *	power limit value in units of 0.25 dBm if type is
  *	NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm).