Merge series "ASoC: sdm845: fix soundwire stream handling" from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:

Recent addition of SoundWire stream state-machine checks in linux-next
have shown an existing issue with handling soundwire streams in codec drivers.

In general soundwire stream prepare/enable/disable can be called from either
codec/machine/controller driver. However calling it in codec driver means
that if multiple instances(Left/Right speakers) of the same codec is
connected to the same stream then it will endup calling stream
prepare/enable/disable more than once. This will mess up the stream
state-machine checks in the soundwire core.

Moving this stream handling to machine driver would fix this issue
and also allow board/platform specfic power sequencing.

Changes since v1:
	- removed false error check while setting sruntime.

Srinivas Kandagatla (2):
  ASoC: qcom: sdm845: handle soundwire stream
  ASoC: codecs: wsa881x: remove soundwire stream handling

 sound/soc/codecs/wsa881x.c | 44 +------------------------
 sound/soc/qcom/Kconfig     |  2 +-
 sound/soc/qcom/sdm845.c    | 67 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 69 insertions(+), 44 deletions(-)

--
2.21.0

1 files changed, 1 insertions, 43 deletions

diff --git a/sound/soc/codecs/wsa881x.c b/sound/soc/codecs/wsa881x.c
index b59f1d0e7f84..3d525297eac9 100644
--- a/sound/soc/codecs/wsa881x.c
+++ b/sound/soc/codecs/wsa881x.c
@@ -676,7 +676,6 @@ struct wsa881x_priv {
 	int active_ports;
 	bool port_prepared[WSA881X_MAX_SWR_PORTS];
 	bool port_enable[WSA881X_MAX_SWR_PORTS];
-	bool stream_prepared;
 };
 
 static void wsa881x_init(struct wsa881x_priv *wsa881x)
@@ -954,41 +953,6 @@ static const struct snd_soc_dapm_widget wsa881x_dapm_widgets[] = {
 	SND_SOC_DAPM_OUTPUT("SPKR"),
 };
 
-static int wsa881x_prepare(struct snd_pcm_substream *substream,
-			   struct snd_soc_dai *dai)
-{
-	struct wsa881x_priv *wsa881x = dev_get_drvdata(dai->dev);
-	int ret;
-
-	if (wsa881x->stream_prepared) {
-		sdw_disable_stream(wsa881x->sruntime);
-		sdw_deprepare_stream(wsa881x->sruntime);
-		wsa881x->stream_prepared = false;
-	}
-
-
-	ret = sdw_prepare_stream(wsa881x->sruntime);
-	if (ret)
-		return ret;
-
-	/**
-	 * NOTE: there is a strict hw requirement about the ordering of port
-	 * enables and actual PA enable. PA enable should only happen after
-	 * soundwire ports are enabled if not DC on the line is accumulated
-	 * resulting in Click/Pop Noise
-	 * PA enable/mute are handled as part of DAPM and digital mute.
-	 */
-
-	ret = sdw_enable_stream(wsa881x->sruntime);
-	if (ret) {
-		sdw_deprepare_stream(wsa881x->sruntime);
-		return ret;
-	}
-	wsa881x->stream_prepared = true;
-
-	return ret;
-}
-
 static int wsa881x_hw_params(struct snd_pcm_substream *substream,
 			     struct snd_pcm_hw_params *params,
 			     struct snd_soc_dai *dai)
@@ -1016,12 +980,7 @@ static int wsa881x_hw_free(struct snd_pcm_substream *substream,
 {
 	struct wsa881x_priv *wsa881x = dev_get_drvdata(dai->dev);
 
-	if (wsa881x->stream_prepared) {
-		sdw_disable_stream(wsa881x->sruntime);
-		sdw_deprepare_stream(wsa881x->sruntime);
-		sdw_stream_remove_slave(wsa881x->slave, wsa881x->sruntime);
-		wsa881x->stream_prepared = false;
-	}
+	sdw_stream_remove_slave(wsa881x->slave, wsa881x->sruntime);
 
 	return 0;
 }
@@ -1052,7 +1011,6 @@ static int wsa881x_digital_mute(struct snd_soc_dai *dai, int mute, int stream)
 
 static struct snd_soc_dai_ops wsa881x_dai_ops = {
 	.hw_params = wsa881x_hw_params,
-	.prepare = wsa881x_prepare,
 	.hw_free = wsa881x_hw_free,
 	.mute_stream = wsa881x_digital_mute,
 	.set_sdw_stream = wsa881x_set_sdw_stream,