diff options
| -rw-r--r-- | Documentation/input/event-codes.txt | 262 | ||||
| -rw-r--r-- | drivers/input/evdev.c | 33 | ||||
| -rw-r--r-- | drivers/input/input.c | 40 | ||||
| -rw-r--r-- | drivers/input/keyboard/twl4030_keypad.c | 6 | ||||
| -rw-r--r-- | drivers/input/misc/xen-kbdfront.c | 13 | ||||
| -rw-r--r-- | drivers/input/touchscreen/h3600_ts_input.c | 17 | ||||
| -rw-r--r-- | include/linux/input.h | 10 | ||||
| -rw-r--r-- | include/linux/input/mt.h | 6 |
8 files changed, 361 insertions, 26 deletions
diff --git a/Documentation/input/event-codes.txt b/Documentation/input/event-codes.txt new file mode 100644 index 000000000000..23fcb05175be --- /dev/null +++ b/Documentation/input/event-codes.txt @@ -0,0 +1,262 @@ +The input protocol uses a map of types and codes to express input device values +to userspace. This document describes the types and codes and how and when they +may be used. + +A single hardware event generates multiple input events. Each input event +contains the new value of a single data item. A special event type, EV_SYN, is +used to separate input events into packets of input data changes occurring at +the same moment in time. In the following, the term "event" refers to a single +input event encompassing a type, code, and value. + +The input protocol is a stateful protocol. Events are emitted only when values +of event codes have changed. However, the state is maintained within the Linux +input subsystem; drivers do not need to maintain the state and may attempt to +emit unchanged values without harm. Userspace may obtain the current state of +event code values using the EVIOCG* ioctls defined in linux/input.h. The event +reports supported by a device are also provided by sysfs in +class/input/event*/device/capabilities/, and the properties of a device are +provided in class/input/event*/device/properties. + +Types: +========== +Types are groupings of codes under a logical input construct. Each type has a +set of applicable codes to be used in generating events. See the Codes section +for details on valid codes for each type. + +* EV_SYN: + - Used as markers to separate events. Events may be separated in time or in + space, such as with the multitouch protocol. + +* EV_KEY: + - Used to describe state changes of keyboards, buttons, or other key-like + devices. + +* EV_REL: + - Used to describe relative axis value changes, e.g. moving the mouse 5 units + to the left. + +* EV_ABS: + - Used to describe absolute axis value changes, e.g. describing the + coordinates of a touch on a touchscreen. + +* EV_MSC: + - Used to describe miscellaneous input data that do not fit into other types. + +* EV_SW: + - Used to describe binary state input switches. + +* EV_LED: + - Used to turn LEDs on devices on and off. + +* EV_SND: + - Used to output sound to devices. + +* EV_REP: + - Used for autorepeating devices. + +* EV_FF: + - Used to send force feedback commands to an input device. + +* EV_PWR: + - A special type for power button and switch input. + +* EV_FF_STATUS: + - Used to receive force feedback device status. + +Codes: +========== +Codes define the precise type of event. + +EV_SYN: +---------- +EV_SYN event values are undefined. Their usage is defined only by when they are +sent in the evdev event stream. + +* SYN_REPORT: + - Used to synchronize and separate events into packets of input data changes + occurring at the same moment in time. For example, motion of a mouse may set + the REL_X and REL_Y values for one motion, then emit a SYN_REPORT. The next + motion will emit more REL_X and REL_Y values and send another SYN_REPORT. + +* SYN_CONFIG: + - TBD + +* SYN_MT_REPORT: + - Used to synchronize and separate touch events. See the + multi-touch-protocol.txt document for more information. + +* SYN_DROPPED: + - Used to indicate buffer overrun in the evdev client's event queue. + Client should ignore all events up to and including next SYN_REPORT + event and query the device (using EVIOCG* ioctls) to obtain its + current state. + +EV_KEY: +---------- +EV_KEY events take the form KEY_<name> or BTN_<name>. For example, KEY_A is used +to represent the 'A' key on a keyboard. When a key is depressed, an event with +the key's code is emitted with value 1. When the key is released, an event is +emitted with value 0. Some hardware send events when a key is repeated. These +events have a value of 2. In general, KEY_<name> is used for keyboard keys, and +BTN_<name> is used for other types of momentary switch events. + +A few EV_KEY codes have special meanings: + +* BTN_TOOL_<name>: + - These codes are used in conjunction with input trackpads, tablets, and + touchscreens. These devices may be used with fingers, pens, or other tools. + When an event occurs and a tool is used, the corresponding BTN_TOOL_<name> + code should be set to a value of 1. When the tool is no longer interacting + with the input device, the BTN_TOOL_<name> code should be reset to 0. All + trackpads, tablets, and touchscreens should use at least one BTN_TOOL_<name> + code when events are generated. + +* BTN_TOUCH: + BTN_TOUCH is used for touch contact. While an input tool is determined to be + within meaningful physical contact, the value of this property must be set + to 1. Meaningful physical contact may mean any contact, or it may mean + contact conditioned by an implementation defined property. For example, a + touchpad may set the value to 1 only when the touch pressure rises above a + certain value. BTN_TOUCH may be combined with BTN_TOOL_<name> codes. For + example, a pen tablet may set BTN_TOOL_PEN to 1 and BTN_TOUCH to 0 while the + pen is hovering over but not touching the tablet surface. + +Note: For appropriate function of the legacy mousedev emulation driver, +BTN_TOUCH must be the first evdev code emitted in a synchronization frame. + +Note: Historically a touch device with BTN_TOOL_FINGER and BTN_TOUCH was +interpreted as a touchpad by userspace, while a similar device without +BTN_TOOL_FINGER was interpreted as a touchscreen. For backwards compatibility +with current userspace it is recommended to follow this distinction. In the +future, this distinction will be deprecated and the device properties ioctl +EVIOCGPROP, defined in linux/input.h, will be used to convey the device type. + +* BTN_TOOL_FINGER, BTN_TOOL_DOUBLETAP, BTN_TOOL_TRIPLETAP, BTN_TOOL_QUADTAP: + - These codes denote one, two, three, and four finger interaction on a + trackpad or touchscreen. For example, if the user uses two fingers and moves + them on the touchpad in an effort to scroll content on screen, + BTN_TOOL_DOUBLETAP should be set to value 1 for the duration of the motion. + Note that all BTN_TOOL_<name> codes and the BTN_TOUCH code are orthogonal in + purpose. A trackpad event generated by finger touches should generate events + for one code from each group. At most only one of these BTN_TOOL_<name> + codes should have a value of 1 during any synchronization frame. + +Note: Historically some drivers emitted multiple of the finger count codes with +a value of 1 in the same synchronization frame. This usage is deprecated. + +Note: In multitouch drivers, the input_mt_report_finger_count() function should +be used to emit these codes. Please see multi-touch-protocol.txt for details. + +EV_REL: +---------- +EV_REL events describe relative changes in a property. For example, a mouse may +move to the left by a certain number of units, but its absolute position in +space is unknown. If the absolute position is known, EV_ABS codes should be used +instead of EV_REL codes. + +A few EV_REL codes have special meanings: + +* REL_WHEEL, REL_HWHEEL: + - These codes are used for vertical and horizontal scroll wheels, + respectively. + +EV_ABS: +---------- +EV_ABS events describe absolute changes in a property. For example, a touchpad +may emit coordinates for a touch location. + +A few EV_ABS codes have special meanings: + +* ABS_DISTANCE: + - Used to describe the distance of a tool from an interaction surface. This + event should only be emitted while the tool is hovering, meaning in close + proximity of the device and while the value of the BTN_TOUCH code is 0. If + the input device may be used freely in three dimensions, consider ABS_Z + instead. + +* ABS_MT_<name>: + - Used to describe multitouch input events. Please see + multi-touch-protocol.txt for details. + +EV_SW: +---------- +EV_SW events describe stateful binary switches. For example, the SW_LID code is +used to denote when a laptop lid is closed. + +Upon binding to a device or resuming from suspend, a driver must report +the current switch state. This ensures that the device, kernel, and userspace +state is in sync. + +Upon resume, if the switch state is the same as before suspend, then the input +subsystem will filter out the duplicate switch state reports. The driver does +not need to keep the state of the switch at any time. + +EV_MSC: +---------- +EV_MSC events are used for input and output events that do not fall under other +categories. + +EV_LED: +---------- +EV_LED events are used for input and output to set and query the state of +various LEDs on devices. + +EV_REP: +---------- +EV_REP events are used for specifying autorepeating events. + +EV_SND: +---------- +EV_SND events are used for sending sound commands to simple sound output +devices. + +EV_FF: +---------- +EV_FF events are used to initialize a force feedback capable device and to cause +such device to feedback. + +EV_PWR: +---------- +EV_PWR events are a special type of event used specifically for power +mangement. Its usage is not well defined. To be addressed later. + +Guidelines: +========== +The guidelines below ensure proper single-touch and multi-finger functionality. +For multi-touch functionality, see the multi-touch-protocol.txt document for +more information. + +Mice: +---------- +REL_{X,Y} must be reported when the mouse moves. BTN_LEFT must be used to report +the primary button press. BTN_{MIDDLE,RIGHT,4,5,etc.} should be used to report +further buttons of the device. REL_WHEEL and REL_HWHEEL should be used to report +scroll wheel events where available. + +Touchscreens: +---------- +ABS_{X,Y} must be reported with the location of the touch. BTN_TOUCH must be +used to report when a touch is active on the screen. +BTN_{MOUSE,LEFT,MIDDLE,RIGHT} must not be reported as the result of touch +contact. BTN_TOOL_<name> events should be reported where possible. + +Trackpads: +---------- +Legacy trackpads that only provide relative position information must report +events like mice described above. + +Trackpads that provide absolute touch position must report ABS_{X,Y} for the +location of the touch. BTN_TOUCH should be used to report when a touch is active +on the trackpad. Where multi-finger support is available, BTN_TOOL_<name> should +be used to report the number of touches active on the trackpad. + +Tablets: +---------- +BTN_TOOL_<name> events must be reported when a stylus or other tool is active on +the tablet. ABS_{X,Y} must be reported with the location of the tool. BTN_TOUCH +should be used to report when the tool is in contact with the tablet. +BTN_{STYLUS,STYLUS2} should be used to report buttons on the tool itself. Any +button may be used for buttons on the tablet except BTN_{MOUSE,LEFT}. +BTN_{0,1,2,etc} are good generic codes for unlabeled buttons. Do not use +meaningful buttons, like BTN_FORWARD, unless the button is labeled for that +purpose on the device. diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 7f42d3a454d2..88d8e4cb419a 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -39,13 +39,13 @@ struct evdev { }; struct evdev_client { - int head; - int tail; + unsigned int head; + unsigned int tail; spinlock_t buffer_lock; /* protects access to buffer, head and tail */ struct fasync_struct *fasync; struct evdev *evdev; struct list_head node; - int bufsize; + unsigned int bufsize; struct input_event buffer[]; }; @@ -55,16 +55,25 @@ static DEFINE_MUTEX(evdev_table_mutex); static void evdev_pass_event(struct evdev_client *client, struct input_event *event) { - /* - * Interrupts are disabled, just acquire the lock. - * Make sure we don't leave with the client buffer - * "empty" by having client->head == client->tail. - */ + /* Interrupts are disabled, just acquire the lock. */ spin_lock(&client->buffer_lock); - do { - client->buffer[client->head++] = *event; - client->head &= client->bufsize - 1; - } while (client->head == client->tail); + + client->buffer[client->head++] = *event; + client->head &= client->bufsize - 1; + + if (unlikely(client->head == client->tail)) { + /* + * This effectively "drops" all unconsumed events, leaving + * EV_SYN/SYN_DROPPED plus the newest event in the queue. + */ + client->tail = (client->head - 2) & (client->bufsize - 1); + + client->buffer[client->tail].time = event->time; + client->buffer[client->tail].type = EV_SYN; + client->buffer[client->tail].code = SYN_DROPPED; + client->buffer[client->tail].value = 0; + } + spin_unlock(&client->buffer_lock); if (event->type == EV_SYN) diff --git a/drivers/input/input.c b/drivers/input/input.c index d6e8bd8a851c..ebbceedc92f4 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -1746,6 +1746,42 @@ void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int } EXPORT_SYMBOL(input_set_capability); +static unsigned int input_estimate_events_per_packet(struct input_dev *dev) +{ + int mt_slots; + int i; + unsigned int events; + + if (dev->mtsize) { + mt_slots = dev->mtsize; + } else if (test_bit(ABS_MT_TRACKING_ID, dev->absbit)) { + mt_slots = dev->absinfo[ABS_MT_TRACKING_ID].maximum - + dev->absinfo[ABS_MT_TRACKING_ID].minimum + 1, + clamp(mt_slots, 2, 32); + } else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) { + mt_slots = 2; + } else { + mt_slots = 0; + } + + events = mt_slots + 1; /* count SYN_MT_REPORT and SYN_REPORT */ + + for (i = 0; i < ABS_CNT; i++) { + if (test_bit(i, dev->absbit)) { + if (input_is_mt_axis(i)) + events += mt_slots; + else + events++; + } + } + + for (i = 0; i < REL_CNT; i++) + if (test_bit(i, dev->relbit)) + events++; + + return events; +} + #define INPUT_CLEANSE_BITMASK(dev, type, bits) \ do { \ if (!test_bit(EV_##type, dev->evbit)) \ @@ -1793,6 +1829,10 @@ int input_register_device(struct input_dev *dev) /* Make sure that bitmasks not mentioned in dev->evbit are clean. */ input_cleanse_bitmasks(dev); + if (!dev->hint_events_per_packet) + dev->hint_events_per_packet = + input_estimate_events_per_packet(dev); + /* * If delay and period are pre-set by the driver, then autorepeating * is handled by the driver itself and we don't do it in input.c. diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c index 09bef79d9da1..a26922cf0e84 100644 --- a/drivers/input/keyboard/twl4030_keypad.c +++ b/drivers/input/keyboard/twl4030_keypad.c @@ -332,18 +332,20 @@ static int __devinit twl4030_kp_program(struct twl4030_keypad *kp) static int __devinit twl4030_kp_probe(struct platform_device *pdev) { struct twl4030_keypad_data *pdata = pdev->dev.platform_data; - const struct matrix_keymap_data *keymap_data = pdata->keymap_data; + const struct matrix_keymap_data *keymap_data; struct twl4030_keypad *kp; struct input_dev *input; u8 reg; int error; - if (!pdata || !pdata->rows || !pdata->cols || + if (!pdata || !pdata->rows || !pdata->cols || !pdata->keymap_data || pdata->rows > TWL4030_MAX_ROWS || pdata->cols > TWL4030_MAX_COLS) { dev_err(&pdev->dev, "Invalid platform_data\n"); return -EINVAL; } + keymap_data = pdata->keymap_data; + kp = kzalloc(sizeof(*kp), GFP_KERNEL); input = input_allocate_device(); if (!kp || !input) { diff --git a/drivers/input/misc/xen-kbdfront.c b/drivers/input/misc/xen-kbdfront.c index 7077f9bf5ead..62bae99424e6 100644 --- a/drivers/input/misc/xen-kbdfront.c +++ b/drivers/input/misc/xen-kbdfront.c @@ -303,7 +303,7 @@ static void xenkbd_backend_changed(struct xenbus_device *dev, enum xenbus_state backend_state) { struct xenkbd_info *info = dev_get_drvdata(&dev->dev); - int val; + int ret, val; switch (backend_state) { case XenbusStateInitialising: @@ -316,6 +316,17 @@ static void xenkbd_backend_changed(struct xenbus_device *dev, case XenbusStateInitWait: InitWait: + ret = xenbus_scanf(XBT_NIL, info->xbdev->otherend, + "feature-abs-pointer", "%d", &val); + if (ret < 0) + val = 0; + if (val) { + ret = xenbus_printf(XBT_NIL, info->xbdev->nodename, + "request-abs-pointer", "1"); + if (ret) + pr_warning("xenkbd: can't request abs-pointer"); + } + xenbus_switch_state(dev, XenbusStateConnected); break; diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c index efa06882de00..45f93d0f5592 100644 --- a/drivers/input/touchscreen/h3600_ts_input.c +++ b/drivers/input/touchscreen/h3600_ts_input.c @@ -399,31 +399,34 @@ static int h3600ts_connect(struct serio *serio, struct serio_driver *drv) IRQF_SHARED | IRQF_DISABLED, "h3600_action", &ts->dev)) { printk(KERN_ERR "h3600ts.c: Could not allocate Action Button IRQ!\n"); err = -EBUSY; - goto fail2; + goto fail1; } if (request_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, npower_button_handler, IRQF_SHARED | IRQF_DISABLED, "h3600_suspend", &ts->dev)) { printk(KERN_ERR "h3600ts.c: Could not allocate Power Button IRQ!\n"); err = -EBUSY; - goto fail3; + goto fail2; } serio_set_drvdata(serio, ts); err = serio_open(serio, drv); if (err) - return err; + goto fail3; //h3600_flite_control(1, 25); /* default brightness */ - input_register_device(ts->dev); + err = input_register_device(ts->dev); + if (err) + goto fail4; return 0; -fail3: free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, ts->dev); +fail4: serio_close(serio); +fail3: serio_set_drvdata(serio, NULL); + free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, ts->dev); fail2: free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, ts->dev); -fail1: serio_set_drvdata(serio, NULL); - input_free_device(input_dev); +fail1: input_free_device(input_dev); kfree(ts); return err; } diff --git a/include/linux/input.h b/include/linux/input.h index f3a7794a18c4..771d6d85667d 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -167,6 +167,7 @@ struct input_keymap_entry { #define SYN_REPORT 0 #define SYN_CONFIG 1 #define SYN_MT_REPORT 2 +#define SYN_DROPPED 3 /* * Keys and buttons @@ -553,8 +554,8 @@ struct input_keymap_entry { #define KEY_DVD 0x185 /* Media Select DVD */ #define KEY_AUX 0x186 #define KEY_MP3 0x187 -#define KEY_AUDIO 0x188 -#define KEY_VIDEO 0x189 +#define KEY_AUDIO 0x188 /* AL Audio Browser */ +#define KEY_VIDEO 0x189 /* AL Movie Browser */ #define KEY_DIRECTORY 0x18a #define KEY_LIST 0x18b #define KEY_MEMO 0x18c /* Media Select Messages */ @@ -603,8 +604,9 @@ struct input_keymap_entry { #define KEY_FRAMEFORWARD 0x1b5 #define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */ #define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */ -#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */ -#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */ +#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */ +#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */ +#define KEY_IMAGES 0x1ba /* AL Image Browser */ #define KEY_DEL_EOL 0x1c0 #define KEY_DEL_EOS 0x1c1 diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h index b3ac06a4435d..318bb82325a6 100644 --- a/include/linux/input/mt.h +++ b/include/linux/input/mt.h @@ -48,6 +48,12 @@ static inline void input_mt_slot(struct input_dev *dev, int slot) input_event(dev, EV_ABS, ABS_MT_SLOT, slot); } +static inline bool input_is_mt_axis(int axis) +{ + return axis == ABS_MT_SLOT || + (axis >= ABS_MT_FIRST && axis <= ABS_MT_LAST); +} + void input_mt_report_slot_state(struct input_dev *dev, unsigned int tool_type, bool active); |