diff options
| -rw-r--r-- | drivers/usb/host/ehci-pci.c | 39 | ||||
| -rw-r--r-- | drivers/usb/host/pci-quirks.c | 63 | ||||
| -rw-r--r-- | drivers/usb/host/pci-quirks.h | 2 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-pci.c | 26 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-ring.c | 89 | ||||
| -rw-r--r-- | drivers/usb/host/xhci.c | 240 | ||||
| -rw-r--r-- | drivers/usb/host/xhci.h | 22 | ||||
| -rw-r--r-- | include/linux/pci_ids.h | 1 |
8 files changed, 413 insertions, 69 deletions
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 660b80a75cac..1102ce65a3a9 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -348,11 +348,50 @@ static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) return rc; } +static bool usb_is_intel_switchable_ehci(struct pci_dev *pdev) +{ + return pdev->class == PCI_CLASS_SERIAL_USB_EHCI && + pdev->vendor == PCI_VENDOR_ID_INTEL && + pdev->device == 0x1E26; +} + +static void ehci_enable_xhci_companion(void) +{ + struct pci_dev *companion = NULL; + + /* The xHCI and EHCI controllers are not on the same PCI slot */ + for_each_pci_dev(companion) { + if (!usb_is_intel_switchable_xhci(companion)) + continue; + usb_enable_xhci_ports(companion); + return; + } +} + static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + /* The BIOS on systems with the Intel Panther Point chipset may or may + * not support xHCI natively. That means that during system resume, it + * may switch the ports back to EHCI so that users can use their + * keyboard to select a kernel from GRUB after resume from hibernate. + * + * The BIOS is supposed to remember whether the OS had xHCI ports + * enabled before resume, and switch the ports back to xHCI when the + * BIOS/OS semaphore is written, but we all know we can't trust BIOS + * writers. + * + * Unconditionally switch the ports back to xHCI after a system resume. + * We can't tell whether the EHCI or xHCI controller will be resumed + * first, so we have to do the port switchover in both drivers. Writing + * a '1' to the port switchover registers should have no effect if the + * port was already switched over. + */ + if (usb_is_intel_switchable_ehci(pdev)) + ehci_enable_xhci_companion(); + // maybe restore FLADJ if (time_before(jiffies, ehci->next_statechange)) diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index f16c59d5f487..fd930618c28f 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -69,6 +69,9 @@ #define NB_PIF0_PWRDOWN_0 0x01100012 #define NB_PIF0_PWRDOWN_1 0x01100013 +#define USB_INTEL_XUSB2PR 0xD0 +#define USB_INTEL_USB3_PSSEN 0xD8 + static struct amd_chipset_info { struct pci_dev *nb_dev; struct pci_dev *smbus_dev; @@ -673,6 +676,64 @@ static int handshake(void __iomem *ptr, u32 mask, u32 done, return -ETIMEDOUT; } +bool usb_is_intel_switchable_xhci(struct pci_dev *pdev) +{ + return pdev->class == PCI_CLASS_SERIAL_USB_XHCI && + pdev->vendor == PCI_VENDOR_ID_INTEL && + pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI; +} +EXPORT_SYMBOL_GPL(usb_is_intel_switchable_xhci); + +/* + * Intel's Panther Point chipset has two host controllers (EHCI and xHCI) that + * share some number of ports. These ports can be switched between either + * controller. Not all of the ports under the EHCI host controller may be + * switchable. + * + * The ports should be switched over to xHCI before PCI probes for any device + * start. This avoids active devices under EHCI being disconnected during the + * port switchover, which could cause loss of data on USB storage devices, or + * failed boot when the root file system is on a USB mass storage device and is + * enumerated under EHCI first. + * + * We write into the xHC's PCI configuration space in some Intel-specific + * registers to switch the ports over. The USB 3.0 terminations and the USB + * 2.0 data wires are switched separately. We want to enable the SuperSpeed + * terminations before switching the USB 2.0 wires over, so that USB 3.0 + * devices connect at SuperSpeed, rather than at USB 2.0 speeds. + */ +void usb_enable_xhci_ports(struct pci_dev *xhci_pdev) +{ + u32 ports_available; + + ports_available = 0xffffffff; + /* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable + * Register, to turn on SuperSpeed terminations for all + * available ports. + */ + pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, + cpu_to_le32(ports_available)); + + pci_read_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, + &ports_available); + dev_dbg(&xhci_pdev->dev, "USB 3.0 ports that are now enabled " + "under xHCI: 0x%x\n", ports_available); + + ports_available = 0xffffffff; + /* Write XUSB2PR, the xHC USB 2.0 Port Routing Register, to + * switch the USB 2.0 power and data lines over to the xHCI + * host. + */ + pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, + cpu_to_le32(ports_available)); + + pci_read_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, + &ports_available); + dev_dbg(&xhci_pdev->dev, "USB 2.0 ports that are now switched over " + "to xHCI: 0x%x\n", ports_available); +} +EXPORT_SYMBOL_GPL(usb_enable_xhci_ports); + /** * PCI Quirks for xHCI. * @@ -732,6 +793,8 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev) writel(XHCI_LEGACY_DISABLE_SMI, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET); + if (usb_is_intel_switchable_xhci(pdev)) + usb_enable_xhci_ports(pdev); hc_init: op_reg_base = base + XHCI_HC_LENGTH(readl(base)); diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h index 6ae9f78e9938..b1002a8ef96f 100644 --- a/drivers/usb/host/pci-quirks.h +++ b/drivers/usb/host/pci-quirks.h @@ -8,6 +8,8 @@ int usb_amd_find_chipset_info(void); void usb_amd_dev_put(void); void usb_amd_quirk_pll_disable(void); void usb_amd_quirk_pll_enable(void); +bool usb_is_intel_switchable_xhci(struct pci_dev *pdev); +void usb_enable_xhci_ports(struct pci_dev *xhci_pdev); #else static inline void usb_amd_quirk_pll_disable(void) {} static inline void usb_amd_quirk_pll_enable(void) {} diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index cbc4d491e626..c408e9f6a707 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -118,6 +118,12 @@ static int xhci_pci_setup(struct usb_hcd *hcd) /* AMD PLL quirk */ if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info()) xhci->quirks |= XHCI_AMD_PLL_FIX; + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) { + xhci->quirks |= XHCI_SPURIOUS_SUCCESS; + xhci->quirks |= XHCI_EP_LIMIT_QUIRK; + xhci->limit_active_eps = 64; + } /* Make sure the HC is halted. */ retval = xhci_halt(xhci); @@ -242,8 +248,28 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); int retval = 0; + /* The BIOS on systems with the Intel Panther Point chipset may or may + * not support xHCI natively. That means that during system resume, it + * may switch the ports back to EHCI so that users can use their + * keyboard to select a kernel from GRUB after resume from hibernate. + * + * The BIOS is supposed to remember whether the OS had xHCI ports + * enabled before resume, and switch the ports back to xHCI when the + * BIOS/OS semaphore is written, but we all know we can't trust BIOS + * writers. + * + * Unconditionally switch the ports back to xHCI after a system resume. + * We can't tell whether the EHCI or xHCI controller will be resumed + * first, so we have to do the port switchover in both drivers. Writing + * a '1' to the port switchover registers should have no effect if the + * port was already switched over. + */ + if (usb_is_intel_switchable_xhci(pdev)) + usb_enable_xhci_ports(pdev); + retval = xhci_resume(xhci, hibernated); return retval; } diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 237a765f8d18..cc1485bfed38 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -167,12 +167,6 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer next = ring->dequeue; } addr = (unsigned long long) xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue); - if (ring == xhci->event_ring) - xhci_dbg(xhci, "Event ring deq = 0x%llx (DMA)\n", addr); - else if (ring == xhci->cmd_ring) - xhci_dbg(xhci, "Command ring deq = 0x%llx (DMA)\n", addr); - else - xhci_dbg(xhci, "Ring deq = 0x%llx (DMA)\n", addr); } /* @@ -248,12 +242,6 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, next = ring->enqueue; } addr = (unsigned long long) xhci_trb_virt_to_dma(ring->enq_seg, ring->enqueue); - if (ring == xhci->event_ring) - xhci_dbg(xhci, "Event ring enq = 0x%llx (DMA)\n", addr); - else if (ring == xhci->cmd_ring) - xhci_dbg(xhci, "Command ring enq = 0x%llx (DMA)\n", addr); - else - xhci_dbg(xhci, "Ring enq = 0x%llx (DMA)\n", addr); } /* @@ -636,13 +624,11 @@ static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci, } } usb_hcd_unlink_urb_from_ep(hcd, urb); - xhci_dbg(xhci, "Giveback %s URB %p\n", adjective, urb); spin_unlock(&xhci->lock); usb_hcd_giveback_urb(hcd, urb, status); xhci_urb_free_priv(xhci, urb_priv); spin_lock(&xhci->lock); - xhci_dbg(xhci, "%s URB given back\n", adjective); } } @@ -692,6 +678,8 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci, if (list_empty(&ep->cancelled_td_list)) { xhci_stop_watchdog_timer_in_irq(xhci, ep); + ep->stopped_td = NULL; + ep->stopped_trb = NULL; ring_doorbell_for_active_rings(xhci, slot_id, ep_index); return; } @@ -1093,8 +1081,13 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, complete(&xhci->addr_dev); break; case TRB_TYPE(TRB_DISABLE_SLOT): - if (xhci->devs[slot_id]) + if (xhci->devs[slot_id]) { + if (xhci->quirks & XHCI_EP_LIMIT_QUIRK) + /* Delete default control endpoint resources */ + xhci_free_device_endpoint_resources(xhci, + xhci->devs[slot_id], true); xhci_free_virt_device(xhci, slot_id); + } break; case TRB_TYPE(TRB_CONFIG_EP): virt_dev = xhci->devs[slot_id]; @@ -1630,7 +1623,6 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td, "without IOC set??\n"); *status = -ESHUTDOWN; } else { - xhci_dbg(xhci, "Successful control transfer!\n"); *status = 0; } break; @@ -1727,7 +1719,6 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, switch (trb_comp_code) { case COMP_SUCCESS: frame->status = 0; - xhci_dbg(xhci, "Successful isoc transfer!\n"); break; case COMP_SHORT_TX: frame->status = td->urb->transfer_flags & URB_SHORT_NOT_OK ? @@ -1837,12 +1828,6 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td, else *status = 0; } else { - if (usb_endpoint_xfer_bulk(&td->urb->ep->desc)) - xhci_dbg(xhci, "Successful bulk " - "transfer!\n"); - else - xhci_dbg(xhci, "Successful interrupt " - "transfer!\n"); *status = 0; } break; @@ -1856,11 +1841,12 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td, /* Others already handled above */ break; } - xhci_dbg(xhci, "ep %#x - asked for %d bytes, " - "%d bytes untransferred\n", - td->urb->ep->desc.bEndpointAddress, - td->urb->transfer_buffer_length, - TRB_LEN(le32_to_cpu(event->transfer_len))); + if (trb_comp_code == COMP_SHORT_TX) + xhci_dbg(xhci, "ep %#x - asked for %d bytes, " + "%d bytes untransferred\n", + td->urb->ep->desc.bEndpointAddress, + td->urb->transfer_buffer_length, + TRB_LEN(le32_to_cpu(event->transfer_len))); /* Fast path - was this the last TRB in the TD for this URB? */ if (event_trb == td->last_trb) { if (TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) { @@ -1954,7 +1940,6 @@ static int handle_tx_event(struct xhci_hcd *xhci, /* Endpoint ID is 1 based, our index is zero based */ ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1; - xhci_dbg(xhci, "%s - ep index = %d\n", __func__, ep_index); ep = &xdev->eps[ep_index]; ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer)); ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); @@ -2081,6 +2066,16 @@ static int handle_tx_event(struct xhci_hcd *xhci, if (!event_seg) { if (!ep->skip || !usb_endpoint_xfer_isoc(&td->urb->ep->desc)) { + /* Some host controllers give a spurious + * successful event after a short transfer. + * Ignore it. + */ + if ((xhci->quirks & XHCI_SPURIOUS_SUCCESS) && + ep_ring->last_td_was_short) { + ep_ring->last_td_was_short = false; + ret = 0; + goto cleanup; + } /* HC is busted, give up! */ xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not " @@ -2091,6 +2086,10 @@ static int handle_tx_event(struct xhci_hcd *xhci, ret = skip_isoc_td(xhci, td, event, ep, &status); goto cleanup; } + if (trb_comp_code == COMP_SHORT_TX) + ep_ring->last_td_was_short = true; + else + ep_ring->last_td_was_short = false; if (ep->skip) { xhci_dbg(xhci, "Found td. Clear skip flag.\n"); @@ -2149,9 +2148,15 @@ cleanup: xhci_urb_free_priv(xhci, urb_priv); usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb); - xhci_dbg(xhci, "Giveback URB %p, len = %d, " - "status = %d\n", - urb, urb->actual_length, status); + if ((urb->actual_length != urb->transfer_buffer_length && + (urb->transfer_flags & + URB_SHORT_NOT_OK)) || + status != 0) + xhci_dbg(xhci, "Giveback URB %p, len = %d, " + "expected = %x, status = %d\n", + urb, urb->actual_length, + urb->transfer_buffer_length, + status); spin_unlock(&xhci->lock); usb_hcd_giveback_urb(bus_to_hcd(urb->dev->bus), urb, status); spin_lock(&xhci->lock); @@ -2180,7 +2185,6 @@ static int xhci_handle_event(struct xhci_hcd *xhci) int update_ptrs = 1; int ret; - xhci_dbg(xhci, "In %s\n", __func__); if (!xhci->event_ring || !xhci->event_ring->dequeue) { xhci->error_bitmask |= 1 << 1; return 0; @@ -2193,7 +2197,6 @@ static int xhci_handle_event(struct xhci_hcd *xhci) xhci->error_bitmask |= 1 << 2; return 0; } - xhci_dbg(xhci, "%s - OS owns TRB\n", __func__); /* * Barrier between reading the TRB_CYCLE (valid) flag above and any @@ -2203,20 +2206,14 @@ static int xhci_handle_event(struct xhci_hcd *xhci) /* FIXME: Handle more event types. */ switch ((le32_to_cpu(event->event_cmd.flags) & TRB_TYPE_BITMASK)) { case TRB_TYPE(TRB_COMPLETION): - xhci_dbg(xhci, "%s - calling handle_cmd_completion\n", __func__); handle_cmd_completion(xhci, &event->event_cmd); - xhci_dbg(xhci, "%s - returned from handle_cmd_completion\n", __func__); break; case TRB_TYPE(TRB_PORT_STATUS): - xhci_dbg(xhci, "%s - calling handle_port_status\n", __func__); handle_port_status(xhci, event); - xhci_dbg(xhci, "%s - returned from handle_port_status\n", __func__); update_ptrs = 0; break; case TRB_TYPE(TRB_TRANSFER): - xhci_dbg(xhci, "%s - calling handle_tx_event\n", __func__); ret = handle_tx_event(xhci, &event->trans_event); - xhci_dbg(xhci, "%s - returned from handle_tx_event\n", __func__); if (ret < 0) xhci->error_bitmask |= 1 << 9; else @@ -2273,16 +2270,6 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) spin_unlock(&xhci->lock); return IRQ_NONE; } - xhci_dbg(xhci, "op reg status = %08x\n", status); - xhci_dbg(xhci, "Event ring dequeue ptr:\n"); - xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n", - (unsigned long long) - xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb), - lower_32_bits(le64_to_cpu(trb->link.segment_ptr)), - upper_32_bits(le64_to_cpu(trb->link.segment_ptr)), - (unsigned int) le32_to_cpu(trb->link.intr_target), - (unsigned int) le32_to_cpu(trb->link.control)); - if (status & STS_FATAL) { xhci_warn(xhci, "WARNING: Host System Error\n"); xhci_halt(xhci); @@ -2397,7 +2384,6 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, u32 ep_state, unsigned int num_trbs, gfp_t mem_flags) { /* Make sure the endpoint has been added to xHC schedule */ - xhci_dbg(xhci, "Endpoint state = 0x%x\n", ep_state); switch (ep_state) { case EP_STATE_DISABLED: /* @@ -2434,7 +2420,6 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, struct xhci_ring *ring = ep_ring; union xhci_trb *next; - xhci_dbg(xhci, "prepare_ring: pointing to link trb\n"); next = ring->enqueue; while (last_trb(xhci, ring, ring->enq_seg, next)) { diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 8f2a56ece44f..d9660eb97eb9 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1314,8 +1314,10 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, if (ret <= 0) return ret; xhci = hcd_to_xhci(hcd); - xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev); + if (xhci->xhc_state & XHCI_STATE_DYING) + return -ENODEV; + xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev); drop_flag = xhci_get_endpoint_flag(&ep->desc); if (drop_flag == SLOT_FLAG || drop_flag == EP0_FLAG) { xhci_dbg(xhci, "xHCI %s - can't drop slot or ep 0 %#x\n", @@ -1401,6 +1403,8 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, return ret; } xhci = hcd_to_xhci(hcd); + if (xhci->xhc_state & XHCI_STATE_DYING) + return -ENODEV; added_ctxs = xhci_get_endpoint_flag(&ep->desc); last_ctx = xhci_last_valid_endpoint(added_ctxs); @@ -1578,6 +1582,113 @@ static int xhci_evaluate_context_result(struct xhci_hcd *xhci, return ret; } +static u32 xhci_count_num_new_endpoints(struct xhci_hcd *xhci, + struct xhci_container_ctx *in_ctx) +{ + struct xhci_input_control_ctx *ctrl_ctx; + u32 valid_add_flags; + u32 valid_drop_flags; + + ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); + /* Ignore the slot flag (bit 0), and the default control endpoint flag + * (bit 1). The default control endpoint is added during the Address + * Device command and is never removed until the slot is disabled. + */ + valid_add_flags = ctrl_ctx->add_flags >> 2; + valid_drop_flags = ctrl_ctx->drop_flags >> 2; + + /* Use hweight32 to count the number of ones in the add flags, or + * number of endpoints added. Don't count endpoints that are changed + * (both added and dropped). + */ + return hweight32(valid_add_flags) - + hweight32(valid_add_flags & valid_drop_flags); +} + +static unsigned int xhci_count_num_dropped_endpoints(struct xhci_hcd *xhci, + struct xhci_container_ctx *in_ctx) +{ + struct xhci_input_control_ctx *ctrl_ctx; + u32 valid_add_flags; + u32 valid_drop_flags; + + ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); + valid_add_flags = ctrl_ctx->add_flags >> 2; + valid_drop_flags = ctrl_ctx->drop_flags >> 2; + + return hweight32(valid_drop_flags) - + hweight32(valid_add_flags & valid_drop_flags); +} + +/* + * We need to reserve the new number of endpoints before the configure endpoint + * command completes. We can't subtract the dropped endpoints from the number + * of active endpoints until the command completes because we can oversubscribe + * the host in this case: + * + * - the first configure endpoint command drops more endpoints than it adds + * - a second configure endpoint command that adds more endpoints is queued + * - the first configure endpoint command fails, so the config is unchanged + * - the second command may succeed, even though there isn't enough resources + * + * Must be called with xhci->lock held. + */ +static int xhci_reserve_host_resources(struct xhci_hcd *xhci, + struct xhci_container_ctx *in_ctx) +{ + u32 added_eps; + + added_eps = xhci_count_num_new_endpoints(xhci, in_ctx); + if (xhci->num_active_eps + added_eps > xhci->limit_active_eps) { + xhci_dbg(xhci, "Not enough ep ctxs: " + "%u active, need to add %u, limit is %u.\n", + xhci->num_active_eps, added_eps, + xhci->limit_active_eps); + return -ENOMEM; + } + xhci->num_active_eps += added_eps; + xhci_dbg(xhci, "Adding %u ep ctxs, %u now active.\n", added_eps, + xhci->num_active_eps); + return 0; +} + +/* + * The configure endpoint was failed by the xHC for some other reason, so we + * need to revert the resources that failed configuration would have used. + * + * Must be called with xhci->lock held. + */ +static void xhci_free_host_resources(struct xhci_hcd *xhci, + struct xhci_container_ctx *in_ctx) +{ + u32 num_failed_eps; + + num_failed_eps = xhci_count_num_new_endpoints(xhci, in_ctx); + xhci->num_active_eps -= num_failed_eps; + xhci_dbg(xhci, "Removing %u failed ep ctxs, %u now active.\n", + num_failed_eps, + xhci->num_active_eps); +} + +/* + * Now that the command has completed, clean up the active endpoint count by + * subtracting out the endpoints that were dropped (but not changed). + * + * Must be called with xhci->lock held. + */ +static void xhci_finish_resource_reservation(struct xhci_hcd *xhci, + struct xhci_container_ctx *in_ctx) +{ + u32 num_dropped_eps; + + num_dropped_eps = xhci_count_num_dropped_endpoints(xhci, in_ctx); + xhci->num_active_eps -= num_dropped_eps; + if (num_dropped_eps) + xhci_dbg(xhci, "Removing %u dropped ep ctxs, %u now active.\n", + num_dropped_eps, + xhci->num_active_eps); +} + /* Issue a configure endpoint command or evaluate context command * and wait for it to finish. */ @@ -1598,6 +1709,15 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, virt_dev = xhci->devs[udev->slot_id]; if (command) { in_ctx = command->in_ctx; + if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK) && + xhci_reserve_host_resources(xhci, in_ctx)) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_warn(xhci, "Not enough host resources, " + "active endpoint contexts = %u\n", + xhci->num_active_eps); + return -ENOMEM; + } + cmd_completion = command->completion; cmd_status = &command->status; command->command_trb = xhci->cmd_ring->enqueue; @@ -1613,6 +1733,14 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, list_add_tail(&command->cmd_list, &virt_dev->cmd_list); } else { in_ctx = virt_dev->in_ctx; + if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK) && + xhci_reserve_host_resources(xhci, in_ctx)) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_warn(xhci, "Not enough host resources, " + "active endpoint contexts = %u\n", + xhci->num_active_eps); + return -ENOMEM; + } cmd_completion = &virt_dev->cmd_completion; cmd_status = &virt_dev->cmd_status; } @@ -1627,6 +1755,8 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, if (ret < 0) { if (command) list_del(&command->cmd_list); + if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) + xhci_free_host_resources(xhci, in_ctx); spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg(xhci, "FIXME allocate a new ring segment\n"); return -ENOMEM; @@ -1649,8 +1779,22 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, } if (!ctx_change) - return xhci_configure_endpoint_result(xhci, udev, cmd_status); - return xhci_evaluate_context_result(xhci, udev, cmd_status); + ret = xhci_configure_endpoint_result(xhci, udev, cmd_status); + else + ret = xhci_evaluate_context_result(xhci, udev, cmd_status); + + if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) { + spin_lock_irqsave(&xhci->lock, flags); + /* If the command failed, remove the reserved resources. + * Otherwise, clean up the estimate to include dropped eps. + */ + if (ret) + xhci_free_host_resources(xhci, in_ctx); + else + xhci_finish_resource_reservation(xhci, in_ctx); + spin_unlock_irqrestore(&xhci->lock, flags); + } + return ret; } /* Called after one or more calls to xhci_add_endpoint() or @@ -1676,6 +1820,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) if (ret <= 0) return ret; xhci = hcd_to_xhci(hcd); + if (xhci->xhc_state & XHCI_STATE_DYING) + return -ENODEV; xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev); virt_dev = xhci->devs[udev->slot_id]; @@ -2266,6 +2412,34 @@ int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev, } /* + * Deletes endpoint resources for endpoints that were active before a Reset + * Device command, or a Disable Slot command. The Reset Device command leaves + * the control endpoint intact, whereas the Disable Slot command deletes it. + * + * Must be called with xhci->lock held. + */ +void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev, bool drop_control_ep) +{ + int i; + unsigned int num_dropped_eps = 0; + unsigned int drop_flags = 0; + + for (i = (drop_control_ep ? 0 : 1); i < 31; i++) { + if (virt_dev->eps[i].ring) { + drop_flags |= 1 << i; + num_dropped_eps++; + } + } + xhci->num_active_eps -= num_dropped_eps; + if (num_dropped_eps) + xhci_dbg(xhci, "Dropped %u ep ctxs, flags = 0x%x, " + "%u now active.\n", + num_dropped_eps, drop_flags, + xhci->num_active_eps); +} + +/* * This submits a Reset Device Command, which will set the device state to 0, * set the device address to 0, and disable all the endpoints except the default * control endpoint. The USB core should come back and call @@ -2406,6 +2580,14 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) goto command_cleanup; } + /* Free up host controller endpoint resources */ + if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) { + spin_lock_irqsave(&xhci->lock, flags); + /* Don't delete the default control endpoint resources */ + xhci_free_device_endpoint_resources(xhci, virt_dev, false); + spin_unlock_irqrestore(&xhci->lock, flags); + } + /* Everything but endpoint 0 is disabled, so free or cache the rings. */ last_freed_endpoint = 1; for (i = 1; i < 31; ++i) { @@ -2479,6 +2661,27 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) } /* + * Checks if we have enough host controller resources for the default control + * endpoint. + * + * Must be called with xhci->lock held. + */ +static int xhci_reserve_host_control_ep_resources(struct xhci_hcd *xhci) +{ + if (xhci->num_active_eps + 1 > xhci->limit_active_eps) { + xhci_dbg(xhci, "Not enough ep ctxs: " + "%u active, need to add 1, limit is %u.\n", + xhci->num_active_eps, xhci->limit_active_eps); + return -ENOMEM; + } + xhci->num_active_eps += 1; + xhci_dbg(xhci, "Adding 1 ep ctx, %u now active.\n", + xhci->num_active_eps); + return 0; +} + + +/* * Returns 0 if the xHC ran out of device slots, the Enable Slot command * timed out, or allocating memory failed. Returns 1 on success. */ @@ -2513,24 +2716,39 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) xhci_err(xhci, "Error while assigning device slot ID\n"); return 0; } - /* xhci_alloc_virt_device() does not touch rings; no need to lock. - * Use GFP_NOIO, since this function can be called from + + if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) { + spin_lock_irqsave(&xhci->lock, flags); + ret = xhci_reserve_host_control_ep_resources(xhci); + if (ret) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_warn(xhci, "Not enough host resources, " + "active endpoint contexts = %u\n", + xhci->num_active_eps); + goto disable_slot; + } + spin_unlock_irqrestore(&xhci->lock, flags); + } + /* Use GFP_NOIO, since this function can be called from * xhci_discover_or_reset_device(), which may be called as part of * mass storage driver error handling. */ if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_NOIO)) { - /* Disable slot, if we can do it without mem alloc */ xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n"); - spin_lock_irqsave(&xhci->lock, flags); - if (!xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id)) - xhci_ring_cmd_db(xhci); - spin_unlock_irqrestore(&xhci->lock, flags); - return 0; + goto disable_slot; } udev->slot_id = xhci->slot_id; /* Is this a LS or FS device under a HS hub? */ /* Hub or peripherial? */ return 1; + +disable_slot: + /* Disable slot, if we can do it without mem alloc */ + spin_lock_irqsave(&xhci->lock, flags); + if (!xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id)) + xhci_ring_cmd_db(xhci); + spin_unlock_irqrestore(&xhci->lock, flags); + return 0; } /* diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index e12db7cfb9bb..ac0196e7fcf1 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1123,6 +1123,7 @@ struct xhci_ring { */ u32 cycle_state; unsigned int stream_id; + bool last_td_was_short; }; struct xhci_erst_entry { @@ -1290,6 +1291,19 @@ struct xhci_hcd { #define XHCI_RESET_EP_QUIRK (1 << 1) #define XHCI_NEC_HOST (1 << 2) #define XHCI_AMD_PLL_FIX (1 << 3) +#define XHCI_SPURIOUS_SUCCESS (1 << 4) +/* + * Certain Intel host controllers have a limit to the number of endpoint + * contexts they can handle. Ideally, they would signal that they can't handle + * anymore endpoint contexts by returning a Resource Error for the Configure + * Endpoint command, but they don't. Instead they expect software to keep track + * of the number of active endpoints for them, across configure endpoint + * commands, reset device commands, disable slot commands, and address device + * commands. + */ +#define XHCI_EP_LIMIT_QUIRK (1 << 5) + unsigned int num_active_eps; + unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ struct xhci_bus_state bus_state[2]; /* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */ @@ -1338,9 +1352,6 @@ static inline unsigned int xhci_readl(const struct xhci_hcd *xhci, static inline void xhci_writel(struct xhci_hcd *xhci, const unsigned int val, __le32 __iomem *regs) { - xhci_dbg(xhci, - "`MEM_WRITE_DWORD(3'b000, 32'h%p, 32'h%0x, 4'hf);\n", - regs, val); writel(val, regs); } @@ -1368,9 +1379,6 @@ static inline void xhci_write_64(struct xhci_hcd *xhci, u32 val_lo = lower_32_bits(val); u32 val_hi = upper_32_bits(val); - xhci_dbg(xhci, - "`MEM_WRITE_DWORD(3'b000, 64'h%p, 64'h%0lx, 4'hf);\n", - regs, (long unsigned int) val); writel(val_lo, ptr); writel(val_hi, ptr + 1); } @@ -1439,6 +1447,8 @@ void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci, void xhci_setup_no_streams_ep_input_ctx(struct xhci_hcd *xhci, struct xhci_ep_ctx *ep_ctx, struct xhci_virt_ep *ep); +void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev, bool drop_control_ep); struct xhci_ring *xhci_dma_to_transfer_ring( struct xhci_virt_ep *ep, u64 address); diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 24787b751286..a311008af5e1 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2483,6 +2483,7 @@ #define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX 0x1c5f #define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_0 0x1d40 #define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_1 0x1d41 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI 0x1e31 #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN 0x1e40 #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX 0x1e5f #define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MIN 0x2310 |