diff options
| -rw-r--r-- | MAINTAINERS | 9 | ||||
| -rw-r--r-- | drivers/ata/Kconfig | 21 | ||||
| -rw-r--r-- | drivers/ata/Makefile | 2 | ||||
| -rw-r--r-- | drivers/ata/pata_ftide010.c | 567 | ||||
| -rw-r--r-- | drivers/ata/sata_gemini.c | 438 | ||||
| -rw-r--r-- | drivers/ata/sata_gemini.h | 21 |
6 files changed, 1058 insertions, 0 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index f7d568b8f133..96753be12026 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7531,6 +7531,15 @@ S: Maintained F: drivers/ata/pata_*.c F: drivers/ata/ata_generic.c +LIBATA PATA FARADAY FTIDE010 AND GEMINI SATA BRIDGE DRIVERS +M: Linus Walleij <linus.walleij@linaro.org> +L: linux-ide@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git +S: Maintained +F: drivers/ata/pata_ftide010.c +F: drivers/ata/sata_gemini.c +F: drivers/ata/sata_gemini.h + LIBATA SATA AHCI PLATFORM devices support M: Hans de Goede <hdegoede@redhat.com> M: Tejun Heo <tj@kernel.org> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index de3eaf051697..948fc86980a1 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -213,6 +213,16 @@ config SATA_FSL If unsure, say N. +config SATA_GEMINI + tristate "Gemini SATA bridge support" + depends on PATA_FTIDE010 + default ARCH_GEMINI + help + This enabled support for the FTIDE010 to SATA bridge + found in Cortina Systems Gemini platform. + + If unsure, say N. + config SATA_AHCI_SEATTLE tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support" depends on ARCH_SEATTLE @@ -599,6 +609,17 @@ config PATA_EP93XX If unsure, say N. +config PATA_FTIDE010 + tristate "Faraday Technology FTIDE010 PATA support" + depends on OF + depends on ARM + default ARCH_GEMINI + help + This option enables support for the Faraday FTIDE010 + PATA controller found in the Cortina Gemini SoCs. + + If unsure, say N. + config PATA_HPT366 tristate "HPT 366/368 PATA support" depends on PCI diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index cd931a5eba92..a26ef5a93919 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_SATA_ACARD_AHCI) += acard-ahci.o libahci.o obj-$(CONFIG_SATA_AHCI_SEATTLE) += ahci_seattle.o libahci.o libahci_platform.o obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o libahci_platform.o obj-$(CONFIG_SATA_FSL) += sata_fsl.o +obj-$(CONFIG_SATA_GEMINI) += sata_gemini.o obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o obj-$(CONFIG_SATA_SIL24) += sata_sil24.o obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o @@ -60,6 +61,7 @@ obj-$(CONFIG_PATA_CS5536) += pata_cs5536.o obj-$(CONFIG_PATA_CYPRESS) += pata_cypress.o obj-$(CONFIG_PATA_EFAR) += pata_efar.o obj-$(CONFIG_PATA_EP93XX) += pata_ep93xx.o +obj-$(CONFIG_PATA_FTIDE010) += pata_ftide010.o obj-$(CONFIG_PATA_HPT366) += pata_hpt366.o obj-$(CONFIG_PATA_HPT37X) += pata_hpt37x.o obj-$(CONFIG_PATA_HPT3X2N) += pata_hpt3x2n.o diff --git a/drivers/ata/pata_ftide010.c b/drivers/ata/pata_ftide010.c new file mode 100644 index 000000000000..7b7e417ba8ba --- /dev/null +++ b/drivers/ata/pata_ftide010.c @@ -0,0 +1,567 @@ +/* + * Faraday Technology FTIDE010 driver + * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> + * + * Includes portions of the SL2312/SL3516/Gemini PATA driver + * Copyright (C) 2003 StorLine, Inc <jason@storlink.com.tw> + * Copyright (C) 2009 Janos Laube <janos.dev@gmail.com> + * Copyright (C) 2010 Frederic Pecourt <opengemini@free.fr> + * Copyright (C) 2011 Tobias Waldvogel <tobias.waldvogel@gmail.com> + */ + +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/libata.h> +#include <linux/bitops.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/clk.h> +#include "sata_gemini.h" + +#define DRV_NAME "pata_ftide010" + +/** + * struct ftide010 - state container for the Faraday FTIDE010 + * @dev: pointer back to the device representing this controller + * @base: remapped I/O space address + * @pclk: peripheral clock for the IDE block + * @host: pointer to the ATA host for this device + * @master_cbl: master cable type + * @slave_cbl: slave cable type + * @sg: Gemini SATA bridge pointer, if running on the Gemini + * @master_to_sata0: Gemini SATA bridge: the ATA master is connected + * to the SATA0 bridge + * @slave_to_sata0: Gemini SATA bridge: the ATA slave is connected + * to the SATA0 bridge + * @master_to_sata1: Gemini SATA bridge: the ATA master is connected + * to the SATA1 bridge + * @slave_to_sata1: Gemini SATA bridge: the ATA slave is connected + * to the SATA1 bridge + */ +struct ftide010 { + struct device *dev; + void __iomem *base; + struct clk *pclk; + struct ata_host *host; + unsigned int master_cbl; + unsigned int slave_cbl; + /* Gemini-specific properties */ + struct sata_gemini *sg; + bool master_to_sata0; + bool slave_to_sata0; + bool master_to_sata1; + bool slave_to_sata1; +}; + +#define FTIDE010_DMA_REG 0x00 +#define FTIDE010_DMA_STATUS 0x02 +#define FTIDE010_IDE_BMDTPR 0x04 +#define FTIDE010_IDE_DEVICE_ID 0x08 +#define FTIDE010_PIO_TIMING 0x10 +#define FTIDE010_MWDMA_TIMING 0x11 +#define FTIDE010_UDMA_TIMING0 0x12 /* Master */ +#define FTIDE010_UDMA_TIMING1 0x13 /* Slave */ +#define FTIDE010_CLK_MOD 0x14 +/* These registers are mapped directly to the IDE registers */ +#define FTIDE010_CMD_DATA 0x20 +#define FTIDE010_ERROR_FEATURES 0x21 +#define FTIDE010_NSECT 0x22 +#define FTIDE010_LBAL 0x23 +#define FTIDE010_LBAM 0x24 +#define FTIDE010_LBAH 0x25 +#define FTIDE010_DEVICE 0x26 +#define FTIDE010_STATUS_COMMAND 0x27 +#define FTIDE010_ALTSTAT_CTRL 0x36 + +/* Set this bit for UDMA mode 5 and 6 */ +#define FTIDE010_UDMA_TIMING_MODE_56 BIT(7) + +/* 0 = 50 MHz, 1 = 66 MHz */ +#define FTIDE010_CLK_MOD_DEV0_CLK_SEL BIT(0) +#define FTIDE010_CLK_MOD_DEV1_CLK_SEL BIT(1) +/* Enable UDMA on a device */ +#define FTIDE010_CLK_MOD_DEV0_UDMA_EN BIT(4) +#define FTIDE010_CLK_MOD_DEV1_UDMA_EN BIT(5) + +static struct scsi_host_template pata_ftide010_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +/* + * Bus timings + * + * The unit of the below required timings is two clock periods of the ATA + * reference clock which is 30 nanoseconds per unit at 66MHz and 20 + * nanoseconds per unit at 50 MHz. The PIO timings assume 33MHz speed for + * PIO. + * + * pio_active_time: array of 5 elements for T2 timing for Mode 0, + * 1, 2, 3 and 4. Range 0..15. + * pio_recovery_time: array of 5 elements for T2l timing for Mode 0, + * 1, 2, 3 and 4. Range 0..15. + * mdma_50_active_time: array of 4 elements for Td timing for multi + * word DMA, Mode 0, 1, and 2 at 50 MHz. Range 0..15. + * mdma_50_recovery_time: array of 4 elements for Tk timing for + * multi word DMA, Mode 0, 1 and 2 at 50 MHz. Range 0..15. + * mdma_66_active_time: array of 4 elements for Td timing for multi + * word DMA, Mode 0, 1 and 2 at 66 MHz. Range 0..15. + * mdma_66_recovery_time: array of 4 elements for Tk timing for + * multi word DMA, Mode 0, 1 and 2 at 66 MHz. Range 0..15. + * udma_50_setup_time: array of 4 elements for Tvds timing for ultra + * DMA, Mode 0, 1, 2, 3, 4 and 5 at 50 MHz. Range 0..7. + * udma_50_hold_time: array of 4 elements for Tdvh timing for + * multi word DMA, Mode 0, 1, 2, 3, 4 and 5 at 50 MHz, Range 0..7. + * udma_66_setup_time: array of 4 elements for Tvds timing for multi + * word DMA, Mode 0, 1, 2, 3, 4, 5 and 6 at 66 MHz. Range 0..7. + * udma_66_hold_time: array of 4 elements for Tdvh timing for + * multi word DMA, Mode 0, 1, 2, 3, 4, 5 and 6 at 66 MHz. Range 0..7. + */ +static const u8 pio_active_time[5] = {10, 10, 10, 3, 3}; +static const u8 pio_recovery_time[5] = {10, 3, 1, 3, 1}; +static const u8 mwdma_50_active_time[3] = {6, 2, 2}; +static const u8 mwdma_50_recovery_time[3] = {6, 2, 1}; +static const u8 mwdma_66_active_time[3] = {8, 3, 3}; +static const u8 mwdma_66_recovery_time[3] = {8, 2, 1}; +static const u8 udma_50_setup_time[6] = {3, 3, 2, 2, 1, 1}; +static const u8 udma_50_hold_time[6] = {3, 1, 1, 1, 1, 1}; +static const u8 udma_66_setup_time[7] = {4, 4, 3, 2, }; +static const u8 udma_66_hold_time[7] = {}; + +/* + * We set 66 MHz for all MWDMA modes + */ +static const bool set_mdma_66_mhz[] = { true, true, true, true }; + +/* + * We set 66 MHz for UDMA modes 3, 4 and 6 and no others + */ +static const bool set_udma_66_mhz[] = { false, false, false, true, true, false, true }; + +static void ftide010_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct ftide010 *ftide = ap->host->private_data; + u8 speed = adev->dma_mode; + u8 devno = adev->devno & 1; + u8 udma_en_mask; + u8 f66m_en_mask; + u8 clkreg; + u8 timreg; + u8 i; + + /* Target device 0 (master) or 1 (slave) */ + if (!devno) { + udma_en_mask = FTIDE010_CLK_MOD_DEV0_UDMA_EN; + f66m_en_mask = FTIDE010_CLK_MOD_DEV0_CLK_SEL; + } else { + udma_en_mask = FTIDE010_CLK_MOD_DEV1_UDMA_EN; + f66m_en_mask = FTIDE010_CLK_MOD_DEV1_CLK_SEL; + } + + clkreg = readb(ftide->base + FTIDE010_CLK_MOD); + clkreg &= ~udma_en_mask; + clkreg &= ~f66m_en_mask; + + if (speed & XFER_UDMA_0) { + i = speed & ~XFER_UDMA_0; + dev_dbg(ftide->dev, "set UDMA mode %02x, index %d\n", + speed, i); + + clkreg |= udma_en_mask; + if (set_udma_66_mhz[i]) { + clkreg |= f66m_en_mask; + timreg = udma_66_setup_time[i] << 4 | + udma_66_hold_time[i]; + } else { + timreg = udma_50_setup_time[i] << 4 | + udma_50_hold_time[i]; + } + + /* A special bit needs to be set for modes 5 and 6 */ + if (i >= 5) + timreg |= FTIDE010_UDMA_TIMING_MODE_56; + + dev_dbg(ftide->dev, "UDMA write clkreg = %02x, timreg = %02x\n", + clkreg, timreg); + + writeb(clkreg, ftide->base + FTIDE010_CLK_MOD); + writeb(timreg, ftide->base + FTIDE010_UDMA_TIMING0 + devno); + } else { + i = speed & ~XFER_MW_DMA_0; + dev_dbg(ftide->dev, "set MWDMA mode %02x, index %d\n", + speed, i); + + if (set_mdma_66_mhz[i]) { + clkreg |= f66m_en_mask; + timreg = mwdma_66_active_time[i] << 4 | + mwdma_66_recovery_time[i]; + } else { + timreg = mwdma_50_active_time[i] << 4 | + mwdma_50_recovery_time[i]; + } + dev_dbg(ftide->dev, + "MWDMA write clkreg = %02x, timreg = %02x\n", + clkreg, timreg); + /* This will affect all devices */ + writeb(clkreg, ftide->base + FTIDE010_CLK_MOD); + writeb(timreg, ftide->base + FTIDE010_MWDMA_TIMING); + } + + /* + * Store the current device (master or slave) in ap->private_data + * so that .qc_issue() can detect if this changes and reprogram + * the DMA settings. + */ + ap->private_data = adev; + + return; +} + +static void ftide010_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ftide010 *ftide = ap->host->private_data; + u8 pio = adev->pio_mode - XFER_PIO_0; + + dev_dbg(ftide->dev, "set PIO mode %02x, index %d\n", + adev->pio_mode, pio); + writeb(pio_active_time[pio] << 4 | pio_recovery_time[pio], + ftide->base + FTIDE010_PIO_TIMING); +} + +/* + * We implement our own qc_issue() callback since we may need to set up + * the timings differently for master and slave transfers: the CLK_MOD_REG + * and MWDMA_TIMING_REG is shared between master and slave, so reprogramming + * this may be necessary. + */ +static unsigned int ftide010_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + + /* + * If the device changed, i.e. slave->master, master->slave, + * then set up the DMA mode again so we are sure the timings + * are correct. + */ + if (adev != ap->private_data && ata_dma_enabled(adev)) + ftide010_set_dmamode(ap, adev); + + return ata_bmdma_qc_issue(qc); +} + +static struct ata_port_operations pata_ftide010_port_ops = { + .inherits = &ata_bmdma_port_ops, + .set_dmamode = ftide010_set_dmamode, + .set_piomode = ftide010_set_piomode, + .qc_issue = ftide010_qc_issue, +}; + +static struct ata_port_info ftide010_port_info[] = { + { + .flags = ATA_FLAG_SLAVE_POSS, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .pio_mask = ATA_PIO4, + .port_ops = &pata_ftide010_port_ops, + }, +}; + +#if IS_ENABLED(CONFIG_SATA_GEMINI) + +static int pata_ftide010_gemini_port_start(struct ata_port *ap) +{ + struct ftide010 *ftide = ap->host->private_data; + struct device *dev = ftide->dev; + struct sata_gemini *sg = ftide->sg; + int bridges = 0; + int ret; + + ret = ata_bmdma_port_start(ap); + if (ret) + return ret; + + if (ftide->master_to_sata0) { + dev_info(dev, "SATA0 (master) start\n"); + ret = gemini_sata_start_bridge(sg, 0); + if (!ret) + bridges++; + } + if (ftide->master_to_sata1) { + dev_info(dev, "SATA1 (master) start\n"); + ret = gemini_sata_start_bridge(sg, 1); + if (!ret) + bridges++; + } + /* Avoid double-starting */ + if (ftide->slave_to_sata0 && !ftide->master_to_sata0) { + dev_info(dev, "SATA0 (slave) start\n"); + ret = gemini_sata_start_bridge(sg, 0); + if (!ret) + bridges++; + } + /* Avoid double-starting */ + if (ftide->slave_to_sata1 && !ftide->master_to_sata1) { + dev_info(dev, "SATA1 (slave) start\n"); + ret = gemini_sata_start_bridge(sg, 1); + if (!ret) + bridges++; + } + + dev_info(dev, "brought %d bridges online\n", bridges); + return (bridges > 0) ? 0 : -EINVAL; // -ENODEV; +} + +static void pata_ftide010_gemini_port_stop(struct ata_port *ap) +{ + struct ftide010 *ftide = ap->host->private_data; + struct device *dev = ftide->dev; + struct sata_gemini *sg = ftide->sg; + + if (ftide->master_to_sata0) { + dev_info(dev, "SATA0 (master) stop\n"); + gemini_sata_stop_bridge(sg, 0); + } + if (ftide->master_to_sata1) { + dev_info(dev, "SATA1 (master) stop\n"); + gemini_sata_stop_bridge(sg, 1); + } + /* Avoid double-stopping */ + if (ftide->slave_to_sata0 && !ftide->master_to_sata0) { + dev_info(dev, "SATA0 (slave) stop\n"); + gemini_sata_stop_bridge(sg, 0); + } + /* Avoid double-stopping */ + if (ftide->slave_to_sata1 && !ftide->master_to_sata1) { + dev_info(dev, "SATA1 (slave) stop\n"); + gemini_sata_stop_bridge(sg, 1); + } +} + +static int pata_ftide010_gemini_cable_detect(struct ata_port *ap) +{ + struct ftide010 *ftide = ap->host->private_data; + + /* + * Return the master cable, I have no clue how to return a different + * cable for the slave than for the master. + */ + return ftide->master_cbl; +} + +static int pata_ftide010_gemini_init(struct ftide010 *ftide, + bool is_ata1) +{ + struct device *dev = ftide->dev; + struct sata_gemini *sg; + enum gemini_muxmode muxmode; + + /* Look up SATA bridge */ + sg = gemini_sata_bridge_get(); + if (IS_ERR(sg)) + return PTR_ERR(sg); + ftide->sg = sg; + + muxmode = gemini_sata_get_muxmode(sg); + + /* Special ops */ + pata_ftide010_port_ops.port_start = + pata_ftide010_gemini_port_start; + pata_ftide010_port_ops.port_stop = + pata_ftide010_gemini_port_stop; + pata_ftide010_port_ops.cable_detect = + pata_ftide010_gemini_cable_detect; + + /* Flag port as SATA-capable */ + if (gemini_sata_bridge_enabled(sg, is_ata1)) + ftide010_port_info[0].flags |= ATA_FLAG_SATA; + + /* + * We assume that a simple 40-wire cable is used in the PATA mode. + * if you're adding a system using the PATA interface, make sure + * the right cable is set up here, it might be necessary to use + * special hardware detection or encode the cable type in the device + * tree with special properties. + */ + if (!is_ata1) { + switch (muxmode) { + case GEMINI_MUXMODE_0: + ftide->master_cbl = ATA_CBL_SATA; + ftide->slave_cbl = ATA_CBL_PATA40; + ftide->master_to_sata0 = true; + break; + case GEMINI_MUXMODE_1: + ftide->master_cbl = ATA_CBL_SATA; + ftide->slave_cbl = ATA_CBL_NONE; + ftide->master_to_sata0 = true; + break; + case GEMINI_MUXMODE_2: + ftide->master_cbl = ATA_CBL_PATA40; + ftide->slave_cbl = ATA_CBL_PATA40; + break; + case GEMINI_MUXMODE_3: + ftide->master_cbl = ATA_CBL_SATA; + ftide->slave_cbl = ATA_CBL_SATA; + ftide->master_to_sata0 = true; + ftide->slave_to_sata1 = true; + break; + } + } else { + switch (muxmode) { + case GEMINI_MUXMODE_0: + ftide->master_cbl = ATA_CBL_SATA; + ftide->slave_cbl = ATA_CBL_NONE; + ftide->master_to_sata1 = true; + break; + case GEMINI_MUXMODE_1: + ftide->master_cbl = ATA_CBL_SATA; + ftide->slave_cbl = ATA_CBL_PATA40; + ftide->master_to_sata1 = true; + break; + case GEMINI_MUXMODE_2: + ftide->master_cbl = ATA_CBL_SATA; + ftide->slave_cbl = ATA_CBL_SATA; + ftide->slave_to_sata0 = true; + ftide->master_to_sata1 = true; + break; + case GEMINI_MUXMODE_3: + ftide->master_cbl = ATA_CBL_PATA40; + ftide->slave_cbl = ATA_CBL_PATA40; + break; + } + } + dev_info(dev, "set up Gemini PATA%d\n", is_ata1); + + return 0; +} +#else +static int pata_ftide010_gemini_init(struct ftide010 *ftide, + bool is_ata1) +{ + return -ENOTSUPP; +} +#endif + + +static int pata_ftide010_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + const struct ata_port_info pi = ftide010_port_info[0]; + const struct ata_port_info *ppi[] = { &pi, NULL }; + struct ftide010 *ftide; + struct resource *res; + int irq; + int ret; + int i; + + ftide = devm_kzalloc(dev, sizeof(*ftide), GFP_KERNEL); + if (!ftide) + return -ENOMEM; + ftide->dev = dev; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + ftide->base = devm_ioremap_resource(dev, res); + if (IS_ERR(ftide->base)) + return PTR_ERR(ftide->base); + + ftide->pclk = devm_clk_get(dev, "PCLK"); + if (!IS_ERR(ftide->pclk)) { + ret = clk_prepare_enable(ftide->pclk); + if (ret) { + dev_err(dev, "failed to enable PCLK\n"); + return ret; + } + } + + /* Some special Cortina Gemini init, if needed */ + if (of_device_is_compatible(np, "cortina,gemini-pata")) { + /* + * We need to know which instance is probing (the + * Gemini has two instances of FTIDE010) and we do + * this simply by looking at the physical base + * address, which is 0x63400000 for ATA1, else we + * are ATA0. This will also set up the cable types. + */ + ret = pata_ftide010_gemini_init(ftide, + (res->start == 0x63400000)); + if (ret) + goto err_dis_clk; + } else { + /* Else assume we are connected using PATA40 */ + ftide->master_cbl = ATA_CBL_PATA40; + ftide->slave_cbl = ATA_CBL_PATA40; + } + + ftide->host = ata_host_alloc_pinfo(dev, ppi, 1); + if (!ftide->host) { + ret = -ENOMEM; + goto err_dis_clk; + } + ftide->host->private_data = ftide; + + for (i = 0; i < ftide->host->n_ports; i++) { + struct ata_port *ap = ftide->host->ports[i]; + struct ata_ioports *ioaddr = &ap->ioaddr; + + ioaddr->bmdma_addr = ftide->base + FTIDE010_DMA_REG; + ioaddr->cmd_addr = ftide->base + FTIDE010_CMD_DATA; + ioaddr->ctl_addr = ftide->base + FTIDE010_ALTSTAT_CTRL; + ioaddr->altstatus_addr = ftide->base + FTIDE010_ALTSTAT_CTRL; + ata_sff_std_ports(ioaddr); + } + + dev_info(dev, "device ID %08x, irq %d, io base 0x%08x\n", + readl(ftide->base + FTIDE010_IDE_DEVICE_ID), irq, res->start); + + ret = ata_host_activate(ftide->host, irq, ata_bmdma_interrupt, + 0, &pata_ftide010_sht); + if (ret) + goto err_dis_clk; + + return 0; + +err_dis_clk: + if (!IS_ERR(ftide->pclk)) + clk_disable_unprepare(ftide->pclk); + return ret; +} + +static int pata_ftide010_remove(struct platform_device *pdev) +{ + struct ata_host *host = platform_get_drvdata(pdev); + struct ftide010 *ftide = host->private_data; + + ata_host_detach(ftide->host); + if (!IS_ERR(ftide->pclk)) + clk_disable_unprepare(ftide->pclk); + + return 0; +} + +static const struct of_device_id pata_ftide010_of_match[] = { + { + .compatible = "faraday,ftide010", + }, + {}, +}; + +static struct platform_driver pata_ftide010_driver = { + .driver = { + .name = DRV_NAME, + .of_match_table = of_match_ptr(pata_ftide010_of_match), + }, + .probe = pata_ftide010_probe, + .remove = pata_ftide010_remove, +}; +module_platform_driver(pata_ftide010_driver); + +MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/ata/sata_gemini.c b/drivers/ata/sata_gemini.c new file mode 100644 index 000000000000..8c704523bae7 --- /dev/null +++ b/drivers/ata/sata_gemini.c @@ -0,0 +1,438 @@ +/* + * Cortina Systems Gemini SATA bridge add-on to Faraday FTIDE010 + * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/bitops.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> +#include <linux/delay.h> +#include <linux/reset.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/clk.h> +#include <linux/io.h> +#include "sata_gemini.h" + +#define DRV_NAME "gemini_sata_bridge" + +/** + * struct sata_gemini - a state container for a Gemini SATA bridge + * @dev: the containing device + * @base: remapped I/O memory base + * @muxmode: the current muxing mode + * @ide_pins: if the device is using the plain IDE interface pins + * @sata_bridge: if the device enables the SATA bridge + * @sata0_reset: SATA0 reset handler + * @sata1_reset: SATA1 reset handler + * @sata0_pclk: SATA0 PCLK handler + * @sata1_pclk: SATA1 PCLK handler + */ +struct sata_gemini { + struct device *dev; + void __iomem *base; + enum gemini_muxmode muxmode; + bool ide_pins; + bool sata_bridge; + struct reset_control *sata0_reset; + struct reset_control *sata1_reset; + struct clk *sata0_pclk; + struct clk *sata1_pclk; +}; + +/* Global IDE PAD Skew Control Register */ +#define GEMINI_GLOBAL_IDE_SKEW_CTRL 0x18 +#define GEMINI_IDE1_HOST_STROBE_DELAY_SHIFT 28 +#define GEMINI_IDE1_DEVICE_STROBE_DELAY_SHIFT 24 +#define GEMINI_IDE1_OUTPUT_IO_SKEW_SHIFT 20 +#define GEMINI_IDE1_INPUT_IO_SKEW_SHIFT 16 +#define GEMINI_IDE0_HOST_STROBE_DELAY_SHIFT 12 +#define GEMINI_IDE0_DEVICE_STROBE_DELAY_SHIFT 8 +#define GEMINI_IDE0_OUTPUT_IO_SKEW_SHIFT 4 +#define GEMINI_IDE0_INPUT_IO_SKEW_SHIFT 0 + +/* Miscellaneous Control Register */ +#define GEMINI_GLOBAL_MISC_CTRL 0x30 +/* + * Values of IDE IOMUX bits in the misc control register + * + * Bits 26:24 are "IDE IO Select", which decides what SATA + * adapters are connected to which of the two IDE/ATA + * controllers in the Gemini. We can connect the two IDE blocks + * to one SATA adapter each, both acting as master, or one IDE + * blocks to two SATA adapters so the IDE block can act in a + * master/slave configuration. + * + * We also bring out different blocks on the actual IDE + * pins (not SATA pins) if (and only if) these are muxed in. + * + * 111-100 - Reserved + * Mode 0: 000 - ata0 master <-> sata0 + * ata1 master <-> sata1 + * ata0 slave interface brought out on IDE pads + * Mode 1: 001 - ata0 master <-> sata0 + * ata1 master <-> sata1 + * ata1 slave interface brought out on IDE pads + * Mode 2: 010 - ata1 master <-> sata1 + * ata1 slave <-> sata0 + * ata0 master and slave interfaces brought out + * on IDE pads + * Mode 3: 011 - ata0 master <-> sata0 + * ata1 slave <-> sata1 + * ata1 master and slave interfaces brought out + * on IDE pads + */ +#define GEMINI_IDE_IOMUX_MASK (7 << 24) +#define GEMINI_IDE_IOMUX_MODE0 (0 << 24) +#define GEMINI_IDE_IOMUX_MODE1 (1 << 24) +#define GEMINI_IDE_IOMUX_MODE2 (2 << 24) +#define GEMINI_IDE_IOMUX_MODE3 (3 << 24) +#define GEMINI_IDE_IOMUX_SHIFT (24) +#define GEMINI_IDE_PADS_ENABLE BIT(4) +#define GEMINI_PFLASH_PADS_DISABLE BIT(1) + +/* + * Registers directly controlling the PATA<->SATA adapters + */ +#define GEMINI_SATA_ID 0x00 +#define GEMINI_SATA_PHY_ID 0x04 +#define GEMINI_SATA0_STATUS 0x08 +#define GEMINI_SATA1_STATUS 0x0c +#define GEMINI_SATA0_CTRL 0x18 +#define GEMINI_SATA1_CTRL 0x1c + +#define GEMINI_SATA_STATUS_BIST_DONE BIT(5) +#define GEMINI_SATA_STATUS_BIST_OK BIT(4) +#define GEMINI_SATA_STATUS_PHY_READY BIT(0) + +#define GEMINI_SATA_CTRL_PHY_BIST_EN BIT(14) +#define GEMINI_SATA_CTRL_PHY_FORCE_IDLE BIT(13) +#define GEMINI_SATA_CTRL_PHY_FORCE_READY BIT(12) +#define GEMINI_SATA_CTRL_PHY_AFE_LOOP_EN BIT(10) +#define GEMINI_SATA_CTRL_PHY_DIG_LOOP_EN BIT(9) +#define GEMINI_SATA_CTRL_HOTPLUG_DETECT_EN BIT(4) +#define GEMINI_SATA_CTRL_ATAPI_EN BIT(3) +#define GEMINI_SATA_CTRL_BUS_WITH_20 BIT(2) +#define GEMINI_SATA_CTRL_SLAVE_EN BIT(1) +#define GEMINI_SATA_CTRL_EN BIT(0) + +/* + * There is only ever one instance of this bridge on a system, + * so create a singleton so that the FTIDE010 instances can grab + * a reference to it. + */ +static struct sata_gemini *sg_singleton; + +struct sata_gemini *gemini_sata_bridge_get(void) +{ + if (sg_singleton) + return sg_singleton; + return ERR_PTR(-EPROBE_DEFER); +} +EXPORT_SYMBOL(gemini_sata_bridge_get); + +bool gemini_sata_bridge_enabled(struct sata_gemini *sg, bool is_ata1) +{ + if (!sg->sata_bridge) + return false; + /* + * In muxmode 2 and 3 one of the ATA controllers is + * actually not connected to any SATA bridge. + */ + if ((sg->muxmode == GEMINI_MUXMODE_2) && + !is_ata1) + return false; + if ((sg->muxmode == GEMINI_MUXMODE_3) && + is_ata1) + return false; + + return true; +} +EXPORT_SYMBOL(gemini_sata_bridge_enabled); + +enum gemini_muxmode gemini_sata_get_muxmode(struct sata_gemini *sg) +{ + return sg->muxmode; +} +EXPORT_SYMBOL(gemini_sata_get_muxmode); + +static int gemini_sata_setup_bridge(struct sata_gemini *sg, + unsigned int bridge) +{ + unsigned long timeout = jiffies + (HZ * 1); + bool bridge_online; + u32 val; + + if (bridge == 0) { + val = GEMINI_SATA_CTRL_HOTPLUG_DETECT_EN | GEMINI_SATA_CTRL_EN; + /* SATA0 slave mode is only used in muxmode 2 */ + if (sg->muxmode == GEMINI_MUXMODE_2) + val |= GEMINI_SATA_CTRL_SLAVE_EN; + writel(val, sg->base + GEMINI_SATA0_CTRL); + } else { + val = GEMINI_SATA_CTRL_HOTPLUG_DETECT_EN | GEMINI_SATA_CTRL_EN; + /* SATA1 slave mode is only used in muxmode 3 */ + if (sg->muxmode == GEMINI_MUXMODE_3) + val |= GEMINI_SATA_CTRL_SLAVE_EN; + writel(val, sg->base + GEMINI_SATA1_CTRL); + } + + /* Vendor code waits 10 ms here */ + msleep(10); + + /* Wait for PHY to become ready */ + do { + msleep(100); + + if (bridge == 0) + val = readl(sg->base + GEMINI_SATA0_STATUS); + else + val = readl(sg->base + GEMINI_SATA1_STATUS); + if (val & GEMINI_SATA_STATUS_PHY_READY) + break; + } while (time_before(jiffies, timeout)); + + bridge_online = !!(val & GEMINI_SATA_STATUS_PHY_READY); + + dev_info(sg->dev, "SATA%d PHY %s\n", bridge, + bridge_online ? "ready" : "not ready"); + + return bridge_online ? 0: -ENODEV; +} + +int gemini_sata_start_bridge(struct sata_gemini *sg, unsigned int bridge) +{ + struct clk *pclk; + int ret; + + if (bridge == 0) + pclk = sg->sata0_pclk; + else + pclk = sg->sata1_pclk; + clk_enable(pclk); + msleep(10); + + /* Do not keep clocking a bridge that is not online */ + ret = gemini_sata_setup_bridge(sg, bridge); + if (ret) + clk_disable(pclk); + + return ret; +} +EXPORT_SYMBOL(gemini_sata_start_bridge); + +void gemini_sata_stop_bridge(struct sata_gemini *sg, unsigned int bridge) +{ + if (bridge == 0) + clk_disable(sg->sata0_pclk); + else if (bridge == 1) + clk_disable(sg->sata1_pclk); +} +EXPORT_SYMBOL(gemini_sata_stop_bridge); + +int gemini_sata_reset_bridge(struct sata_gemini *sg, + unsigned int bridge) +{ + if (bridge == 0) + reset_control_reset(sg->sata0_reset); + else + reset_control_reset(sg->sata1_reset); + msleep(10); + return gemini_sata_setup_bridge(sg, bridge); +} +EXPORT_SYMBOL(gemini_sata_reset_bridge); + +static int gemini_sata_bridge_init(struct sata_gemini *sg) +{ + struct device *dev = sg->dev; + u32 sata_id, sata_phy_id; + int ret; + + sg->sata0_pclk = devm_clk_get(dev, "SATA0_PCLK"); + if (IS_ERR(sg->sata0_pclk)) { + dev_err(dev, "no SATA0 PCLK"); + return -ENODEV; + } + sg->sata1_pclk = devm_clk_get(dev, "SATA1_PCLK"); + if (IS_ERR(sg->sata1_pclk)) { + dev_err(dev, "no SATA1 PCLK"); + return -ENODEV; + } + + ret = clk_prepare_enable(sg->sata0_pclk); + if (ret) { + pr_err("failed to enable SATA0 PCLK\n"); + return ret; + } + ret = clk_prepare_enable(sg->sata1_pclk); + if (ret) { + pr_err("failed to enable SATA1 PCLK\n"); + clk_disable_unprepare(sg->sata0_pclk); + return ret; + } + + sg->sata0_reset = devm_reset_control_get(dev, "sata0"); + if (IS_ERR(sg->sata0_reset)) { + dev_err(dev, "no SATA0 reset controller\n"); + clk_disable_unprepare(sg->sata1_pclk); + clk_disable_unprepare(sg->sata0_pclk); + return PTR_ERR(sg->sata0_reset); + } + sg->sata1_reset = devm_reset_control_get(dev, "sata1"); + if (IS_ERR(sg->sata1_reset)) { + dev_err(dev, "no SATA1 reset controller\n"); + clk_disable_unprepare(sg->sata1_pclk); + clk_disable_unprepare(sg->sata0_pclk); + return PTR_ERR(sg->sata1_reset); + } + + sata_id = readl(sg->base + GEMINI_SATA_ID); + sata_phy_id = readl(sg->base + GEMINI_SATA_PHY_ID); + sg->sata_bridge = true; + clk_disable(sg->sata0_pclk); + clk_disable(sg->sata1_pclk); + + dev_info(dev, "SATA ID %08x, PHY ID: %08x\n", sata_id, sata_phy_id); + + return 0; +} + +static int gemini_sata_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct sata_gemini *sg; + static struct regmap *map; + struct resource *res; + enum gemini_muxmode muxmode; + u32 gmode; + u32 gmask; + u32 val; + int ret; + + sg = devm_kzalloc(dev, sizeof(*sg), GFP_KERNEL); + if (!sg) + return -ENOMEM; + sg->dev = dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + sg->base = devm_ioremap_resource(dev, res); + if (IS_ERR(sg->base)) + return PTR_ERR(sg->base); + + map = syscon_regmap_lookup_by_phandle(np, "syscon"); + if (IS_ERR(map)) { + dev_err(dev, "no global syscon\n"); + return PTR_ERR(map); + } + + /* Set up the SATA bridge if need be */ + if (of_property_read_bool(np, "cortina,gemini-enable-sata-bridge")) { + ret = gemini_sata_bridge_init(sg); + if (ret) + return ret; + } + + if (of_property_read_bool(np, "cortina,gemini-enable-ide-pins")) + sg->ide_pins = true; + + if (!sg->sata_bridge && !sg->ide_pins) { + dev_err(dev, "neither SATA bridge or IDE output enabled\n"); + ret = -EINVAL; + goto out_unprep_clk; + } + + ret = of_property_read_u32(np, "cortina,gemini-ata-muxmode", &muxmode); + if (ret) { + dev_err(dev, "could not parse ATA muxmode\n"); + goto out_unprep_clk; + } + if (muxmode > GEMINI_MUXMODE_3) { + dev_err(dev, "illegal muxmode %d\n", muxmode); + ret = -EINVAL; + goto out_unprep_clk; + } + sg->muxmode = muxmode; + gmask = GEMINI_IDE_IOMUX_MASK; + gmode = (muxmode << GEMINI_IDE_IOMUX_SHIFT); + + /* + * If we mux out the IDE, parallel flash must be disabled. + * SATA0 and SATA1 have dedicated pins and may coexist with + * parallel flash. + */ + if (sg->ide_pins) + gmode |= GEMINI_IDE_PADS_ENABLE | GEMINI_PFLASH_PADS_DISABLE; + else + gmask |= GEMINI_IDE_PADS_ENABLE; + + ret = regmap_update_bits(map, GEMINI_GLOBAL_MISC_CTRL, gmask, gmode); + if (ret) { + dev_err(dev, "unable to set up IDE muxing\n"); + ret = -ENODEV; + goto out_unprep_clk; + } + + /* FIXME: add more elaborate IDE skew control handling */ + if (sg->ide_pins) { + ret = regmap_read(map, GEMINI_GLOBAL_IDE_SKEW_CTRL, &val); + if (ret) { + dev_err(dev, "cannot read IDE skew control register\n"); + return ret; + } + dev_info(dev, "IDE skew control: %08x\n", val); + } + + dev_info(dev, "set up the Gemini IDE/SATA nexus\n"); + platform_set_drvdata(pdev, sg); + sg_singleton = sg; + + return 0; + +out_unprep_clk: + if (sg->sata_bridge) { + clk_unprepare(sg->sata1_pclk); + clk_unprepare(sg->sata0_pclk); + } + return ret; +} + +static int gemini_sata_remove(struct platform_device *pdev) +{ + struct sata_gemini *sg = platform_get_drvdata(pdev); + + if (sg->sata_bridge) { + clk_unprepare(sg->sata1_pclk); + clk_unprepare(sg->sata0_pclk); + } + sg_singleton = NULL; + + return 0; +} + +static const struct of_device_id gemini_sata_of_match[] = { + { + .compatible = "cortina,gemini-sata-bridge", + }, + {}, +}; + +static struct platform_driver gemini_sata_driver = { + .driver = { + .name = DRV_NAME, + .of_match_table = of_match_ptr(gemini_sata_of_match), + }, + .probe = gemini_sata_probe, + .remove = gemini_sata_remove, +}; +module_platform_driver(gemini_sata_driver); + +MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/ata/sata_gemini.h b/drivers/ata/sata_gemini.h new file mode 100644 index 000000000000..ca1837a394c8 --- /dev/null +++ b/drivers/ata/sata_gemini.h @@ -0,0 +1,21 @@ +/* Header for the Gemini SATA bridge */ +#ifndef SATA_GEMINI_H +#define SATA_GEMINI_H + +struct sata_gemini; + +enum gemini_muxmode { + GEMINI_MUXMODE_0 = 0, + GEMINI_MUXMODE_1, + GEMINI_MUXMODE_2, + GEMINI_MUXMODE_3, +}; + +struct sata_gemini *gemini_sata_bridge_get(void); +bool gemini_sata_bridge_enabled(struct sata_gemini *sg, bool is_ata1); +enum gemini_muxmode gemini_sata_get_muxmode(struct sata_gemini *sg); +int gemini_sata_start_bridge(struct sata_gemini *sg, unsigned int bridge); +void gemini_sata_stop_bridge(struct sata_gemini *sg, unsigned int bridge); +int gemini_sata_reset_bridge(struct sata_gemini *sg, unsigned int bridge); + +#endif |