diff options
| -rw-r--r-- | drivers/misc/habanalabs/gaudi/gaudi.c | 59 | ||||
| -rw-r--r-- | drivers/misc/habanalabs/goya/goya.c | 37 | ||||
| -rw-r--r-- | drivers/misc/habanalabs/habanalabs.h | 52 | ||||
| -rw-r--r-- | drivers/misc/habanalabs/pci.c | 136 |
4 files changed, 180 insertions, 104 deletions
diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c index 888f42adee6a..a6e40dec3cd2 100644 --- a/drivers/misc/habanalabs/gaudi/gaudi.c +++ b/drivers/misc/habanalabs/gaudi/gaudi.c @@ -465,6 +465,7 @@ static int gaudi_pci_bars_map(struct hl_device *hdev) static u64 gaudi_set_hbm_bar_base(struct hl_device *hdev, u64 addr) { struct gaudi_device *gaudi = hdev->asic_specific; + struct hl_inbound_pci_region pci_region; u64 old_addr = addr; int rc; @@ -472,7 +473,10 @@ static u64 gaudi_set_hbm_bar_base(struct hl_device *hdev, u64 addr) return old_addr; /* Inbound Region 2 - Bar 4 - Point to HBM */ - rc = hl_pci_set_dram_bar_base(hdev, 2, 4, addr); + pci_region.mode = PCI_BAR_MATCH_MODE; + pci_region.bar = HBM_BAR_ID; + pci_region.addr = addr; + rc = hl_pci_set_inbound_region(hdev, 2, &pci_region); if (rc) return U64_MAX; @@ -486,22 +490,43 @@ static u64 gaudi_set_hbm_bar_base(struct hl_device *hdev, u64 addr) static int gaudi_init_iatu(struct hl_device *hdev) { - int rc = 0; + struct hl_inbound_pci_region inbound_region; + struct hl_outbound_pci_region outbound_region; + int rc; + + /* Inbound Region 0 - Bar 0 - Point to SRAM + CFG */ + inbound_region.mode = PCI_BAR_MATCH_MODE; + inbound_region.bar = SRAM_BAR_ID; + inbound_region.addr = SRAM_BASE_ADDR; + rc = hl_pci_set_inbound_region(hdev, 0, &inbound_region); + if (rc) + goto done; /* Inbound Region 1 - Bar 2 - Point to SPI FLASH */ - rc = hl_pci_iatu_write(hdev, 0x314, - lower_32_bits(SPI_FLASH_BASE_ADDR)); - rc |= hl_pci_iatu_write(hdev, 0x318, - upper_32_bits(SPI_FLASH_BASE_ADDR)); - rc |= hl_pci_iatu_write(hdev, 0x300, 0); - /* Enable + Bar match + match enable */ - rc |= hl_pci_iatu_write(hdev, 0x304, 0xC0080200); + inbound_region.mode = PCI_BAR_MATCH_MODE; + inbound_region.bar = CFG_BAR_ID; + inbound_region.addr = SPI_FLASH_BASE_ADDR; + rc = hl_pci_set_inbound_region(hdev, 1, &inbound_region); + if (rc) + goto done; + /* Inbound Region 2 - Bar 4 - Point to HBM */ + inbound_region.mode = PCI_BAR_MATCH_MODE; + inbound_region.bar = HBM_BAR_ID; + inbound_region.addr = DRAM_PHYS_BASE; + rc = hl_pci_set_inbound_region(hdev, 2, &inbound_region); if (rc) - return -EIO; + goto done; + + hdev->asic_funcs->set_dma_mask_from_fw(hdev); - return hl_pci_init_iatu(hdev, SRAM_BASE_ADDR, DRAM_PHYS_BASE, - HOST_PHYS_BASE, HOST_PHYS_SIZE); + /* Outbound Region 0 - Point to Host */ + outbound_region.addr = HOST_PHYS_BASE; + outbound_region.size = HOST_PHYS_SIZE; + rc = hl_pci_set_outbound_region(hdev, &outbound_region); + +done: + return rc; } static int gaudi_early_init(struct hl_device *hdev) @@ -2884,16 +2909,6 @@ static int gaudi_hw_init(struct hl_device *hdev) gaudi_init_hbm_dma_qmans(hdev); - /* - * Before pushing u-boot/linux to device, need to set the hbm bar to - * base address of dram - */ - if (gaudi_set_hbm_bar_base(hdev, DRAM_PHYS_BASE) == U64_MAX) { - dev_err(hdev->dev, - "failed to map HBM bar to DRAM base address\n"); - return -EIO; - } - rc = gaudi_init_cpu(hdev); if (rc) { dev_err(hdev->dev, "failed to initialize CPU\n"); diff --git a/drivers/misc/habanalabs/goya/goya.c b/drivers/misc/habanalabs/goya/goya.c index ff32a8fa7624..5839b5bc9ee3 100644 --- a/drivers/misc/habanalabs/goya/goya.c +++ b/drivers/misc/habanalabs/goya/goya.c @@ -458,6 +458,7 @@ static int goya_pci_bars_map(struct hl_device *hdev) static u64 goya_set_ddr_bar_base(struct hl_device *hdev, u64 addr) { struct goya_device *goya = hdev->asic_specific; + struct hl_inbound_pci_region pci_region; u64 old_addr = addr; int rc; @@ -465,7 +466,10 @@ static u64 goya_set_ddr_bar_base(struct hl_device *hdev, u64 addr) return old_addr; /* Inbound Region 1 - Bar 4 - Point to DDR */ - rc = hl_pci_set_dram_bar_base(hdev, 1, 4, addr); + pci_region.mode = PCI_BAR_MATCH_MODE; + pci_region.bar = DDR_BAR_ID; + pci_region.addr = addr; + rc = hl_pci_set_inbound_region(hdev, 1, &pci_region); if (rc) return U64_MAX; @@ -487,8 +491,35 @@ static u64 goya_set_ddr_bar_base(struct hl_device *hdev, u64 addr) */ static int goya_init_iatu(struct hl_device *hdev) { - return hl_pci_init_iatu(hdev, SRAM_BASE_ADDR, DRAM_PHYS_BASE, - HOST_PHYS_BASE, HOST_PHYS_SIZE); + struct hl_inbound_pci_region inbound_region; + struct hl_outbound_pci_region outbound_region; + int rc; + + /* Inbound Region 0 - Bar 0 - Point to SRAM and CFG */ + inbound_region.mode = PCI_BAR_MATCH_MODE; + inbound_region.bar = SRAM_CFG_BAR_ID; + inbound_region.addr = SRAM_BASE_ADDR; + rc = hl_pci_set_inbound_region(hdev, 0, &inbound_region); + if (rc) + goto done; + + /* Inbound Region 1 - Bar 4 - Point to DDR */ + inbound_region.mode = PCI_BAR_MATCH_MODE; + inbound_region.bar = DDR_BAR_ID; + inbound_region.addr = DRAM_PHYS_BASE; + rc = hl_pci_set_inbound_region(hdev, 1, &inbound_region); + if (rc) + goto done; + + hdev->asic_funcs->set_dma_mask_from_fw(hdev); + + /* Outbound Region 0 - Point to Host */ + outbound_region.addr = HOST_PHYS_BASE; + outbound_region.size = HOST_PHYS_SIZE; + rc = hl_pci_set_outbound_region(hdev, &outbound_region); + +done: + return rc; } /* diff --git a/drivers/misc/habanalabs/habanalabs.h b/drivers/misc/habanalabs/habanalabs.h index ae781453a509..365236589bbf 100644 --- a/drivers/misc/habanalabs/habanalabs.h +++ b/drivers/misc/habanalabs/habanalabs.h @@ -66,6 +66,8 @@ #define IS_POWER_OF_2(n) (n != 0 && ((n & (n - 1)) == 0)) #define IS_MAX_PENDING_CS_VALID(n) (IS_POWER_OF_2(n) && (n > 1)) +#define HL_PCI_NUM_BARS 6 + /** * struct pgt_info - MMU hop page info. * @node: hash linked-list node for the pgts shadow hash of pgts. @@ -91,6 +93,16 @@ struct hl_device; struct hl_fpriv; /** + * enum hl_pci_match_mode - pci match mode per region + * @PCI_ADDRESS_MATCH_MODE: address match mode + * @PCI_BAR_MATCH_MODE: bar match mode + */ +enum hl_pci_match_mode { + PCI_ADDRESS_MATCH_MODE, + PCI_BAR_MATCH_MODE +}; + +/** * enum hl_fw_component - F/W components to read version through registers. * @FW_COMP_UBOOT: u-boot. * @FW_COMP_PREBOOT: preboot. @@ -126,6 +138,32 @@ enum hl_cs_type { }; /* + * struct hl_inbound_pci_region - inbound region descriptor + * @mode: pci match mode for this region + * @addr: region target address + * @size: region size in bytes + * @offset_in_bar: offset within bar (address match mode) + * @bar: bar id + */ +struct hl_inbound_pci_region { + enum hl_pci_match_mode mode; + u64 addr; + u64 size; + u64 offset_in_bar; + u8 bar; +}; + +/* + * struct hl_outbound_pci_region - outbound region descriptor + * @addr: region target address + * @size: region size in bytes + */ +struct hl_outbound_pci_region { + u64 addr; + u64 size; +}; + +/* * struct hl_hw_sob - H/W SOB info. * @hdev: habanalabs device structure. * @kref: refcount of this SOB. The SOB will reset once the refcount is zero. @@ -1347,7 +1385,9 @@ struct hl_device_idle_busy_ts { /** * struct hl_device - habanalabs device structure. * @pdev: pointer to PCI device, can be NULL in case of simulator device. - * @pcie_bar: array of available PCIe bars. + * @pcie_bar_phys: array of available PCIe bars physical addresses. + * (required only for PCI address match mode) + * @pcie_bar: array of available PCIe bars virtual addresses. * @rmmio: configuration area address on SRAM. * @cdev: related char device. * @cdev_ctrl: char device for control operations only (INFO IOCTL) @@ -1442,7 +1482,8 @@ struct hl_device_idle_busy_ts { */ struct hl_device { struct pci_dev *pdev; - void __iomem *pcie_bar[6]; + u64 pcie_bar_phys[HL_PCI_NUM_BARS]; + void __iomem *pcie_bar[HL_PCI_NUM_BARS]; void __iomem *rmmio; struct cdev cdev; struct cdev cdev_ctrl; @@ -1767,9 +1808,10 @@ int hl_pci_bars_map(struct hl_device *hdev, const char * const name[3], int hl_pci_iatu_write(struct hl_device *hdev, u32 addr, u32 data); int hl_pci_set_dram_bar_base(struct hl_device *hdev, u8 inbound_region, u8 bar, u64 addr); -int hl_pci_init_iatu(struct hl_device *hdev, u64 sram_base_address, - u64 dram_base_address, u64 host_phys_base_address, - u64 host_phys_size); +int hl_pci_set_inbound_region(struct hl_device *hdev, u8 region, + struct hl_inbound_pci_region *pci_region); +int hl_pci_set_outbound_region(struct hl_device *hdev, + struct hl_outbound_pci_region *pci_region); int hl_pci_init(struct hl_device *hdev); void hl_pci_fini(struct hl_device *hdev); diff --git a/drivers/misc/habanalabs/pci.c b/drivers/misc/habanalabs/pci.c index 61a8bb07262c..1791f6623c69 100644 --- a/drivers/misc/habanalabs/pci.c +++ b/drivers/misc/habanalabs/pci.c @@ -9,9 +9,15 @@ #include "include/hw_ip/pci/pci_general.h" #include <linux/pci.h> +#include <linux/bitfield.h> #define HL_PLDM_PCI_ELBI_TIMEOUT_MSEC (HL_PCI_ELBI_TIMEOUT_MSEC * 10) +#define IATU_REGION_CTRL_REGION_EN_MASK BIT(31) +#define IATU_REGION_CTRL_MATCH_MODE_MASK BIT(30) +#define IATU_REGION_CTRL_NUM_MATCH_EN_MASK BIT(19) +#define IATU_REGION_CTRL_BAR_NUM_MASK GENMASK(10, 8) + /** * hl_pci_bars_map() - Map PCI BARs. * @hdev: Pointer to hl_device structure. @@ -187,110 +193,94 @@ static void hl_pci_reset_link_through_bridge(struct hl_device *hdev) } /** - * hl_pci_set_dram_bar_base() - Set DDR BAR to map specific device address. + * hl_pci_set_inbound_region() - Configure inbound region * @hdev: Pointer to hl_device structure. - * @inbound_region: Inbound region number. - * @bar: PCI BAR number. - * @addr: Address in DRAM. Must be aligned to DRAM bar size. + * @region: Inbound region number. + * @pci_region: Inbound region parameters. * - * Configure the iATU so that the DRAM bar will start at the specified address. + * Configure the iATU inbound region. * * Return: 0 on success, negative value for failure. */ -int hl_pci_set_dram_bar_base(struct hl_device *hdev, u8 inbound_region, u8 bar, - u64 addr) +int hl_pci_set_inbound_region(struct hl_device *hdev, u8 region, + struct hl_inbound_pci_region *pci_region) { struct asic_fixed_properties *prop = &hdev->asic_prop; - u32 offset; - int rc; + u64 bar_phys_base, region_base, region_end_address; + u32 offset, ctrl_reg_val; + int rc = 0; - switch (inbound_region) { - case 0: - offset = 0x100; - break; - case 1: - offset = 0x300; - break; - case 2: - offset = 0x500; - break; - default: - dev_err(hdev->dev, "Invalid inbound region %d\n", - inbound_region); - return -EINVAL; - } + /* region offset */ + offset = (0x200 * region) + 0x100; + + if (pci_region->mode == PCI_ADDRESS_MATCH_MODE) { + bar_phys_base = hdev->pcie_bar_phys[pci_region->bar]; + region_base = bar_phys_base + pci_region->offset_in_bar; + region_end_address = region_base + pci_region->size - 1; - if (bar != 0 && bar != 2 && bar != 4) { - dev_err(hdev->dev, "Invalid PCI BAR %d\n", bar); - return -EINVAL; + rc |= hl_pci_iatu_write(hdev, offset + 0x8, + lower_32_bits(region_base)); + rc |= hl_pci_iatu_write(hdev, offset + 0xC, + upper_32_bits(region_base)); + rc |= hl_pci_iatu_write(hdev, offset + 0x10, + lower_32_bits(region_end_address)); } /* Point to the specified address */ - rc = hl_pci_iatu_write(hdev, offset + 0x14, lower_32_bits(addr)); - rc |= hl_pci_iatu_write(hdev, offset + 0x18, upper_32_bits(addr)); + rc = hl_pci_iatu_write(hdev, offset + 0x14, + lower_32_bits(pci_region->addr)); + rc |= hl_pci_iatu_write(hdev, offset + 0x18, + upper_32_bits(pci_region->addr)); rc |= hl_pci_iatu_write(hdev, offset + 0x0, 0); - /* Enable + BAR match + match enable + BAR number */ - rc |= hl_pci_iatu_write(hdev, offset + 0x4, 0xC0080000 | (bar << 8)); + + /* Enable + bar/address match + match enable + bar number */ + ctrl_reg_val = FIELD_PREP(IATU_REGION_CTRL_REGION_EN_MASK, 1); + ctrl_reg_val |= FIELD_PREP(IATU_REGION_CTRL_MATCH_MODE_MASK, + pci_region->mode); + ctrl_reg_val |= FIELD_PREP(IATU_REGION_CTRL_NUM_MATCH_EN_MASK, 1); + + if (pci_region->mode == PCI_BAR_MATCH_MODE) + ctrl_reg_val |= FIELD_PREP(IATU_REGION_CTRL_BAR_NUM_MASK, + pci_region->bar); + + rc |= hl_pci_iatu_write(hdev, offset + 0x4, ctrl_reg_val); /* Return the DBI window to the default location */ rc |= hl_pci_elbi_write(hdev, prop->pcie_aux_dbi_reg_addr, 0); rc |= hl_pci_elbi_write(hdev, prop->pcie_aux_dbi_reg_addr + 4, 0); if (rc) - dev_err(hdev->dev, "failed to map DRAM bar to 0x%08llx\n", - addr); + dev_err(hdev->dev, "failed to map bar %u to 0x%08llx\n", + pci_region->bar, pci_region->addr); return rc; } /** - * hl_pci_init_iatu() - Initialize the iATU unit inside the PCI controller. + * hl_pci_set_outbound_region() - Configure outbound region 0 * @hdev: Pointer to hl_device structure. - * @sram_base_address: SRAM base address. - * @dram_base_address: DRAM base address. - * @host_phys_base_address: Base physical address of host memory for device - * transactions. - * @host_phys_size: Size of host memory for device transactions. + * @pci_region: Outbound region parameters. * - * This is needed in case the firmware doesn't initialize the iATU. + * Configure the iATU outbound region 0. * * Return: 0 on success, negative value for failure. */ -int hl_pci_init_iatu(struct hl_device *hdev, u64 sram_base_address, - u64 dram_base_address, u64 host_phys_base_address, - u64 host_phys_size) +int hl_pci_set_outbound_region(struct hl_device *hdev, + struct hl_outbound_pci_region *pci_region) { struct asic_fixed_properties *prop = &hdev->asic_prop; - u64 host_phys_end_addr; + u64 outbound_region_end_address; int rc = 0; - /* Inbound Region 0 - Bar 0 - Point to SRAM base address */ - rc = hl_pci_iatu_write(hdev, 0x114, lower_32_bits(sram_base_address)); - rc |= hl_pci_iatu_write(hdev, 0x118, upper_32_bits(sram_base_address)); - rc |= hl_pci_iatu_write(hdev, 0x100, 0); - /* Enable + Bar match + match enable */ - rc |= hl_pci_iatu_write(hdev, 0x104, 0xC0080000); - - /* Return the DBI window to the default location */ - rc |= hl_pci_elbi_write(hdev, prop->pcie_aux_dbi_reg_addr, 0); - rc |= hl_pci_elbi_write(hdev, prop->pcie_aux_dbi_reg_addr + 4, 0); - - hdev->asic_funcs->set_dma_mask_from_fw(hdev); - - /* Point to DRAM */ - if (!hdev->asic_funcs->set_dram_bar_base) - return -EINVAL; - if (hdev->asic_funcs->set_dram_bar_base(hdev, dram_base_address) == - U64_MAX) - return -EIO; - - /* Outbound Region 0 - Point to Host */ - host_phys_end_addr = host_phys_base_address + host_phys_size - 1; + /* Outbound Region 0 */ + outbound_region_end_address = + pci_region->addr + pci_region->size - 1; rc |= hl_pci_iatu_write(hdev, 0x008, - lower_32_bits(host_phys_base_address)); + lower_32_bits(pci_region->addr)); rc |= hl_pci_iatu_write(hdev, 0x00C, - upper_32_bits(host_phys_base_address)); - rc |= hl_pci_iatu_write(hdev, 0x010, lower_32_bits(host_phys_end_addr)); + upper_32_bits(pci_region->addr)); + rc |= hl_pci_iatu_write(hdev, 0x010, + lower_32_bits(outbound_region_end_address)); rc |= hl_pci_iatu_write(hdev, 0x014, 0); if ((hdev->power9_64bit_dma_enable) && (hdev->dma_mask == 64)) @@ -298,7 +288,8 @@ int hl_pci_init_iatu(struct hl_device *hdev, u64 sram_base_address, else rc |= hl_pci_iatu_write(hdev, 0x018, 0); - rc |= hl_pci_iatu_write(hdev, 0x020, upper_32_bits(host_phys_end_addr)); + rc |= hl_pci_iatu_write(hdev, 0x020, + upper_32_bits(outbound_region_end_address)); /* Increase region size */ rc |= hl_pci_iatu_write(hdev, 0x000, 0x00002000); /* Enable */ @@ -308,10 +299,7 @@ int hl_pci_init_iatu(struct hl_device *hdev, u64 sram_base_address, rc |= hl_pci_elbi_write(hdev, prop->pcie_aux_dbi_reg_addr, 0); rc |= hl_pci_elbi_write(hdev, prop->pcie_aux_dbi_reg_addr + 4, 0); - if (rc) - return -EIO; - - return 0; + return rc; } /** |