diff options
| -rw-r--r-- | drivers/mtd/devices/Kconfig | 18 | ||||
| -rw-r--r-- | drivers/mtd/devices/Makefile | 1 | ||||
| -rw-r--r-- | drivers/mtd/devices/m25p80.c | 347 | ||||
| -rw-r--r-- | drivers/mtd/spi-nor/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/mtd/spi-nor/cadence-quadspi.c | 19 | ||||
| -rw-r--r-- | drivers/mtd/spi-nor/intel-spi-pci.c | 1 | ||||
| -rw-r--r-- | drivers/mtd/spi-nor/intel-spi.c | 2 | ||||
| -rw-r--r-- | drivers/mtd/spi-nor/spi-nor.c | 825 | ||||
| -rw-r--r-- | include/linux/mtd/spi-nor.h | 26 |
9 files changed, 793 insertions, 448 deletions
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 49abbc52457d..f96287c4b789 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -79,24 +79,6 @@ config MTD_DATAFLASH_OTP other key product data. The second half is programmed with a unique-to-each-chip bit pattern at the factory. -config MTD_M25P80 - tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)" - depends on SPI_MASTER && MTD_SPI_NOR - select SPI_MEM - help - This enables access to most modern SPI flash chips, used for - program and data storage. Series supported include Atmel AT26DF, - Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips - are supported as well. See the driver source for the current list, - or to add other chips. - - Note that the original DataFlash chips (AT45 series, not AT26DF), - need an entirely different driver. - - Set up your spi devices with the right board-specific platform data, - if you want to specify device partitioning or to use a device which - doesn't support the JEDEC ID instruction. - config MTD_MCHP23K256 tristate "Microchip 23K256 SRAM" depends on SPI_MASTER diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile index 94895eab3066..991c8d12c016 100644 --- a/drivers/mtd/devices/Makefile +++ b/drivers/mtd/devices/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_MTD_MTDRAM) += mtdram.o obj-$(CONFIG_MTD_LART) += lart.o obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o -obj-$(CONFIG_MTD_M25P80) += m25p80.o obj-$(CONFIG_MTD_MCHP23K256) += mchp23k256.o obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o obj-$(CONFIG_MTD_SST25L) += sst25l.o diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c deleted file mode 100644 index c50888670250..000000000000 --- a/drivers/mtd/devices/m25p80.c +++ /dev/null @@ -1,347 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * MTD SPI driver for ST M25Pxx (and similar) serial flash chips - * - * Author: Mike Lavender, mike@steroidmicros.com - * - * Copyright (c) 2005, Intec Automation Inc. - * - * Some parts are based on lart.c by Abraham Van Der Merwe - * - * Cleaned up and generalized based on mtd_dataflash.c - */ - -#include <linux/err.h> -#include <linux/errno.h> -#include <linux/module.h> -#include <linux/device.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <linux/spi/spi.h> -#include <linux/spi/spi-mem.h> -#include <linux/spi/flash.h> -#include <linux/mtd/spi-nor.h> - -struct m25p { - struct spi_mem *spimem; - struct spi_nor spi_nor; -}; - -static int m25p80_read_reg(struct spi_nor *nor, u8 code, u8 *val, int len) -{ - struct m25p *flash = nor->priv; - struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(code, 1), - SPI_MEM_OP_NO_ADDR, - SPI_MEM_OP_NO_DUMMY, - SPI_MEM_OP_DATA_IN(len, NULL, 1)); - void *scratchbuf; - int ret; - - scratchbuf = kmalloc(len, GFP_KERNEL); - if (!scratchbuf) - return -ENOMEM; - - op.data.buf.in = scratchbuf; - ret = spi_mem_exec_op(flash->spimem, &op); - if (ret < 0) - dev_err(&flash->spimem->spi->dev, "error %d reading %x\n", ret, - code); - else - memcpy(val, scratchbuf, len); - - kfree(scratchbuf); - - return ret; -} - -static int m25p80_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) -{ - struct m25p *flash = nor->priv; - struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 1), - SPI_MEM_OP_NO_ADDR, - SPI_MEM_OP_NO_DUMMY, - SPI_MEM_OP_DATA_OUT(len, NULL, 1)); - void *scratchbuf; - int ret; - - scratchbuf = kmemdup(buf, len, GFP_KERNEL); - if (!scratchbuf) - return -ENOMEM; - - op.data.buf.out = scratchbuf; - ret = spi_mem_exec_op(flash->spimem, &op); - kfree(scratchbuf); - - return ret; -} - -static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len, - const u_char *buf) -{ - struct m25p *flash = nor->priv; - struct spi_mem_op op = - SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 1), - SPI_MEM_OP_ADDR(nor->addr_width, to, 1), - SPI_MEM_OP_NO_DUMMY, - SPI_MEM_OP_DATA_OUT(len, buf, 1)); - int ret; - - /* get transfer protocols. */ - op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->write_proto); - op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->write_proto); - op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->write_proto); - - if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second) - op.addr.nbytes = 0; - - ret = spi_mem_adjust_op_size(flash->spimem, &op); - if (ret) - return ret; - op.data.nbytes = len < op.data.nbytes ? len : op.data.nbytes; - - ret = spi_mem_exec_op(flash->spimem, &op); - if (ret) - return ret; - - return op.data.nbytes; -} - -/* - * Read an address range from the nor chip. The address range - * may be any size provided it is within the physical boundaries. - */ -static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len, - u_char *buf) -{ - struct m25p *flash = nor->priv; - struct spi_mem_op op = - SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 1), - SPI_MEM_OP_ADDR(nor->addr_width, from, 1), - SPI_MEM_OP_DUMMY(nor->read_dummy, 1), - SPI_MEM_OP_DATA_IN(len, buf, 1)); - size_t remaining = len; - int ret; - - /* get transfer protocols. */ - op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->read_proto); - op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->read_proto); - op.dummy.buswidth = op.addr.buswidth; - op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto); - - /* convert the dummy cycles to the number of bytes */ - op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8; - - while (remaining) { - op.data.nbytes = remaining < UINT_MAX ? remaining : UINT_MAX; - ret = spi_mem_adjust_op_size(flash->spimem, &op); - if (ret) - return ret; - - ret = spi_mem_exec_op(flash->spimem, &op); - if (ret) - return ret; - - op.addr.val += op.data.nbytes; - remaining -= op.data.nbytes; - op.data.buf.in += op.data.nbytes; - } - - return len; -} - -/* - * board specific setup should have ensured the SPI clock used here - * matches what the READ command supports, at least until this driver - * understands FAST_READ (for clocks over 25 MHz). - */ -static int m25p_probe(struct spi_mem *spimem) -{ - struct spi_device *spi = spimem->spi; - struct flash_platform_data *data; - struct m25p *flash; - struct spi_nor *nor; - struct spi_nor_hwcaps hwcaps = { - .mask = SNOR_HWCAPS_READ | - SNOR_HWCAPS_READ_FAST | - SNOR_HWCAPS_PP, - }; - char *flash_name; - int ret; - - data = dev_get_platdata(&spimem->spi->dev); - - flash = devm_kzalloc(&spimem->spi->dev, sizeof(*flash), GFP_KERNEL); - if (!flash) - return -ENOMEM; - - nor = &flash->spi_nor; - - /* install the hooks */ - nor->read = m25p80_read; - nor->write = m25p80_write; - nor->write_reg = m25p80_write_reg; - nor->read_reg = m25p80_read_reg; - - nor->dev = &spimem->spi->dev; - spi_nor_set_flash_node(nor, spi->dev.of_node); - nor->priv = flash; - - spi_mem_set_drvdata(spimem, flash); - flash->spimem = spimem; - - if (spi->mode & SPI_RX_OCTAL) { - hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8; - - if (spi->mode & SPI_TX_OCTAL) - hwcaps.mask |= (SNOR_HWCAPS_READ_1_8_8 | - SNOR_HWCAPS_PP_1_1_8 | - SNOR_HWCAPS_PP_1_8_8); - } else if (spi->mode & SPI_RX_QUAD) { - hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4; - - if (spi->mode & SPI_TX_QUAD) - hwcaps.mask |= (SNOR_HWCAPS_READ_1_4_4 | - SNOR_HWCAPS_PP_1_1_4 | - SNOR_HWCAPS_PP_1_4_4); - } else if (spi->mode & SPI_RX_DUAL) { - hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2; - - if (spi->mode & SPI_TX_DUAL) - hwcaps.mask |= SNOR_HWCAPS_READ_1_2_2; - } - - if (data && data->name) - nor->mtd.name = data->name; - - if (!nor->mtd.name) - nor->mtd.name = spi_mem_get_name(spimem); - - /* For some (historical?) reason many platforms provide two different - * names in flash_platform_data: "name" and "type". Quite often name is - * set to "m25p80" and then "type" provides a real chip name. - * If that's the case, respect "type" and ignore a "name". - */ - if (data && data->type) - flash_name = data->type; - else if (!strcmp(spi->modalias, "spi-nor")) - flash_name = NULL; /* auto-detect */ - else - flash_name = spi->modalias; - - ret = spi_nor_scan(nor, flash_name, &hwcaps); - if (ret) - return ret; - - return mtd_device_register(&nor->mtd, data ? data->parts : NULL, - data ? data->nr_parts : 0); -} - - -static int m25p_remove(struct spi_mem *spimem) -{ - struct m25p *flash = spi_mem_get_drvdata(spimem); - - spi_nor_restore(&flash->spi_nor); - - /* Clean up MTD stuff. */ - return mtd_device_unregister(&flash->spi_nor.mtd); -} - -static void m25p_shutdown(struct spi_mem *spimem) -{ - struct m25p *flash = spi_mem_get_drvdata(spimem); - - spi_nor_restore(&flash->spi_nor); -} -/* - * Do NOT add to this array without reading the following: - * - * Historically, many flash devices are bound to this driver by their name. But - * since most of these flash are compatible to some extent, and their - * differences can often be differentiated by the JEDEC read-ID command, we - * encourage new users to add support to the spi-nor library, and simply bind - * against a generic string here (e.g., "jedec,spi-nor"). - * - * Many flash names are kept here in this list (as well as in spi-nor.c) to - * keep them available as module aliases for existing platforms. - */ -static const struct spi_device_id m25p_ids[] = { - /* - * Allow non-DT platform devices to bind to the "spi-nor" modalias, and - * hack around the fact that the SPI core does not provide uevent - * matching for .of_match_table - */ - {"spi-nor"}, - - /* - * Entries not used in DTs that should be safe to drop after replacing - * them with "spi-nor" in platform data. - */ - {"s25sl064a"}, {"w25x16"}, {"m25p10"}, {"m25px64"}, - - /* - * Entries that were used in DTs without "jedec,spi-nor" fallback and - * should be kept for backward compatibility. - */ - {"at25df321a"}, {"at25df641"}, {"at26df081a"}, - {"mx25l4005a"}, {"mx25l1606e"}, {"mx25l6405d"}, {"mx25l12805d"}, - {"mx25l25635e"},{"mx66l51235l"}, - {"n25q064"}, {"n25q128a11"}, {"n25q128a13"}, {"n25q512a"}, - {"s25fl256s1"}, {"s25fl512s"}, {"s25sl12801"}, {"s25fl008k"}, - {"s25fl064k"}, - {"sst25vf040b"},{"sst25vf016b"},{"sst25vf032b"},{"sst25wf040"}, - {"m25p40"}, {"m25p80"}, {"m25p16"}, {"m25p32"}, - {"m25p64"}, {"m25p128"}, - {"w25x80"}, {"w25x32"}, {"w25q32"}, {"w25q32dw"}, - {"w25q80bl"}, {"w25q128"}, {"w25q256"}, - - /* Flashes that can't be detected using JEDEC */ - {"m25p05-nonjedec"}, {"m25p10-nonjedec"}, {"m25p20-nonjedec"}, - {"m25p40-nonjedec"}, {"m25p80-nonjedec"}, {"m25p16-nonjedec"}, - {"m25p32-nonjedec"}, {"m25p64-nonjedec"}, {"m25p128-nonjedec"}, - - /* Everspin MRAMs (non-JEDEC) */ - { "mr25h128" }, /* 128 Kib, 40 MHz */ - { "mr25h256" }, /* 256 Kib, 40 MHz */ - { "mr25h10" }, /* 1 Mib, 40 MHz */ - { "mr25h40" }, /* 4 Mib, 40 MHz */ - - { }, -}; -MODULE_DEVICE_TABLE(spi, m25p_ids); - -static const struct of_device_id m25p_of_table[] = { - /* - * Generic compatibility for SPI NOR that can be identified by the - * JEDEC READ ID opcode (0x9F). Use this, if possible. - */ - { .compatible = "jedec,spi-nor" }, - {} -}; -MODULE_DEVICE_TABLE(of, m25p_of_table); - -static struct spi_mem_driver m25p80_driver = { - .spidrv = { - .driver = { - .name = "m25p80", - .of_match_table = m25p_of_table, - }, - .id_table = m25p_ids, - }, - .probe = m25p_probe, - .remove = m25p_remove, - .shutdown = m25p_shutdown, - - /* REVISIT: many of these chips have deep power-down modes, which - * should clearly be entered on suspend() to minimize power use. - * And also when they're otherwise idle... - */ -}; - -module_spi_mem_driver(m25p80_driver); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Mike Lavender"); -MODULE_DESCRIPTION("MTD SPI driver for ST M25Pxx flash chips"); diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig index 6de83277ce8b..f237fcdf7f86 100644 --- a/drivers/mtd/spi-nor/Kconfig +++ b/drivers/mtd/spi-nor/Kconfig @@ -2,6 +2,8 @@ menuconfig MTD_SPI_NOR tristate "SPI-NOR device support" depends on MTD + depends on MTD && SPI_MASTER + select SPI_MEM help This is the framework for the SPI NOR which can be used by the SPI device drivers and the SPI-NOR device driver. diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c index 67f15a1f16fd..7bef63947b29 100644 --- a/drivers/mtd/spi-nor/cadence-quadspi.c +++ b/drivers/mtd/spi-nor/cadence-quadspi.c @@ -13,6 +13,7 @@ #include <linux/errno.h> #include <linux/interrupt.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/jiffies.h> #include <linux/kernel.h> #include <linux/module.h> @@ -241,23 +242,13 @@ struct cqspi_driver_platdata { #define CQSPI_IRQ_STATUS_MASK 0x1FFFF -static int cqspi_wait_for_bit(void __iomem *reg, const u32 mask, bool clear) +static int cqspi_wait_for_bit(void __iomem *reg, const u32 mask, bool clr) { - unsigned long end = jiffies + msecs_to_jiffies(CQSPI_TIMEOUT_MS); u32 val; - while (1) { - val = readl(reg); - if (clear) - val = ~val; - val &= mask; - - if (val == mask) - return 0; - - if (time_after(jiffies, end)) - return -ETIMEDOUT; - } + return readl_relaxed_poll_timeout(reg, val, + (((clr ? ~val : val) & mask) == mask), + 10, CQSPI_TIMEOUT_MS * 1000); } static bool cqspi_is_idle(struct cqspi_st *cqspi) diff --git a/drivers/mtd/spi-nor/intel-spi-pci.c b/drivers/mtd/spi-nor/intel-spi-pci.c index b83c4ab6cd9f..3cda8e7a68f8 100644 --- a/drivers/mtd/spi-nor/intel-spi-pci.c +++ b/drivers/mtd/spi-nor/intel-spi-pci.c @@ -65,6 +65,7 @@ static const struct pci_device_id intel_spi_pci_ids[] = { { PCI_VDEVICE(INTEL, 0x19e0), (unsigned long)&bxt_info }, { PCI_VDEVICE(INTEL, 0x34a4), (unsigned long)&bxt_info }, { PCI_VDEVICE(INTEL, 0x4b24), (unsigned long)&bxt_info }, + { PCI_VDEVICE(INTEL, 0xa0a4), (unsigned long)&bxt_info }, { PCI_VDEVICE(INTEL, 0xa1a4), (unsigned long)&bxt_info }, { PCI_VDEVICE(INTEL, 0xa224), (unsigned long)&bxt_info }, { }, diff --git a/drivers/mtd/spi-nor/intel-spi.c b/drivers/mtd/spi-nor/intel-spi.c index 1ccf23fe7e4b..43e55a2e9b27 100644 --- a/drivers/mtd/spi-nor/intel-spi.c +++ b/drivers/mtd/spi-nor/intel-spi.c @@ -621,6 +621,8 @@ static ssize_t intel_spi_read(struct spi_nor *nor, loff_t from, size_t len, switch (nor->read_opcode) { case SPINOR_OP_READ: case SPINOR_OP_READ_FAST: + case SPINOR_OP_READ_4B: + case SPINOR_OP_READ_FAST_4B: break; default: return -EINVAL; diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 654bdc41fc99..0597cb8257b0 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -19,6 +19,7 @@ #include <linux/mtd/mtd.h> #include <linux/of_platform.h> +#include <linux/sched/task_stack.h> #include <linux/spi/flash.h> #include <linux/mtd/spi-nor.h> @@ -288,6 +289,154 @@ struct flash_info { #define JEDEC_MFR(info) ((info)->id[0]) +/** + * spi_nor_spimem_xfer_data() - helper function to read/write data to + * flash's memory region + * @nor: pointer to 'struct spi_nor' + * @op: pointer to 'struct spi_mem_op' template for transfer + * + * Return: number of bytes transferred on success, -errno otherwise + */ +static ssize_t spi_nor_spimem_xfer_data(struct spi_nor *nor, + struct spi_mem_op *op) +{ + bool usebouncebuf = false; + void *rdbuf = NULL; + const void *buf; + int ret; + + if (op->data.dir == SPI_MEM_DATA_IN) + buf = op->data.buf.in; + else + buf = op->data.buf.out; + + if (object_is_on_stack(buf) || !virt_addr_valid(buf)) + usebouncebuf = true; + + if (usebouncebuf) { + if (op->data.nbytes > nor->bouncebuf_size) + op->data.nbytes = nor->bouncebuf_size; + + if (op->data.dir == SPI_MEM_DATA_IN) { + rdbuf = op->data.buf.in; + op->data.buf.in = nor->bouncebuf; + } else { + op->data.buf.out = nor->bouncebuf; + memcpy(nor->bouncebuf, buf, + op->data.nbytes); + } + } + + ret = spi_mem_adjust_op_size(nor->spimem, op); + if (ret) + return ret; + + ret = spi_mem_exec_op(nor->spimem, op); + if (ret) + return ret; + + if (usebouncebuf && op->data.dir == SPI_MEM_DATA_IN) + memcpy(rdbuf, nor->bouncebuf, op->data.nbytes); + + return op->data.nbytes; +} + +/** + * spi_nor_spimem_read_data() - read data from flash's memory region via + * spi-mem + * @nor: pointer to 'struct spi_nor' + * @from: offset to read from + * @len: number of bytes to read + * @buf: pointer to dst buffer + * + * Return: number of bytes read successfully, -errno otherwise + */ +static ssize_t spi_nor_spimem_read_data(struct spi_nor *nor, loff_t from, + size_t len, u8 *buf) +{ + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 1), + SPI_MEM_OP_ADDR(nor->addr_width, from, 1), + SPI_MEM_OP_DUMMY(nor->read_dummy, 1), + SPI_MEM_OP_DATA_IN(len, buf, 1)); + + /* get transfer protocols. */ + op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->read_proto); + op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->read_proto); + op.dummy.buswidth = op.addr.buswidth; + op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto); + + /* convert the dummy cycles to the number of bytes */ + op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8; + + return spi_nor_spimem_xfer_data(nor, &op); +} + +/** + * spi_nor_read_data() - read data from flash memory + * @nor: pointer to 'struct spi_nor' + * @from: offset to read from + * @len: number of bytes to read + * @buf: pointer to dst buffer + * + * Return: number of bytes read successfully, -errno otherwise + */ +static ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len, + u8 *buf) +{ + if (nor->spimem) + return spi_nor_spimem_read_data(nor, from, len, buf); + + return nor->read(nor, from, len, buf); +} + +/** + * spi_nor_spimem_write_data() - write data to flash memory via + * spi-mem + * @nor: pointer to 'struct spi_nor' + * @to: offset to write to + * @len: number of bytes to write + * @buf: pointer to src buffer + * + * Return: number of bytes written successfully, -errno otherwise + */ +static ssize_t spi_nor_spimem_write_data(struct spi_nor *nor, loff_t to, + size_t len, const u8 *buf) +{ + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 1), + SPI_MEM_OP_ADDR(nor->addr_width, to, 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(len, buf, 1)); + + op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->write_proto); + op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->write_proto); + op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->write_proto); + + if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second) + op.addr.nbytes = 0; + + return spi_nor_spimem_xfer_data(nor, &op); +} + +/** + * spi_nor_write_data() - write data to flash memory + * @nor: pointer to 'struct spi_nor' + * @to: offset to write to + * @len: number of bytes to write + * @buf: pointer to src buffer + * + * Return: number of bytes written successfully, -errno otherwise + */ +static ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len, + const u8 *buf) +{ + if (nor->spimem) + return spi_nor_spimem_write_data(nor, to, len, buf); + + return nor->write(nor, to, len, buf); +} + /* * Read the status register, returning its value in the location * Return the status register value. @@ -296,15 +445,25 @@ struct flash_info { static int read_sr(struct spi_nor *nor) { int ret; - u8 val; - ret = nor->read_reg(nor, SPINOR_OP_RDSR, &val, 1); + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, nor->bouncebuf, 1)); + + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->read_reg(nor, SPINOR_OP_RDSR, nor->bouncebuf, 1); + } + if (ret < 0) { pr_err("error %d reading SR\n", (int) ret); return ret; } - return val; + return nor->bouncebuf[0]; } /* @@ -315,15 +474,25 @@ static int read_sr(struct spi_nor *nor) static int read_fsr(struct spi_nor *nor) { int ret; - u8 val; - ret = nor->read_reg(nor, SPINOR_OP_RDFSR, &val, 1); + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDFSR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, nor->bouncebuf, 1)); + + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->read_reg(nor, SPINOR_OP_RDFSR, nor->bouncebuf, 1); + } + if (ret < 0) { pr_err("error %d reading FSR\n", ret); return ret; } - return val; + return nor->bouncebuf[0]; } /* @@ -334,15 +503,25 @@ static int read_fsr(struct spi_nor *nor) static int read_cr(struct spi_nor *nor) { int ret; - u8 val; - ret = nor->read_reg(nor, SPINOR_OP_RDCR, &val, 1); + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDCR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, nor->bouncebuf, 1)); + + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->read_reg(nor, SPINOR_OP_RDCR, nor->bouncebuf, 1); + } + if (ret < 0) { dev_err(nor->dev, "error %d reading CR\n", ret); return ret; } - return val; + return nor->bouncebuf[0]; } /* @@ -351,8 +530,18 @@ static int read_cr(struct spi_nor *nor) */ static int write_sr(struct spi_nor *nor, u8 val) { - nor->cmd_buf[0] = val; - return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1); + nor->bouncebuf[0] = val; + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, nor->bouncebuf, 1)); + + return spi_mem_exec_op(nor->spimem, &op); + } + + return nor->write_reg(nor, SPINOR_OP_WRSR, nor->bouncebuf, 1); } /* @@ -361,6 +550,16 @@ static int write_sr(struct spi_nor *nor, u8 val) */ static int write_enable(struct spi_nor *nor) { + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WREN, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_NO_DATA); + + return spi_mem_exec_op(nor->spimem, &op); + } + return nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0); } @@ -369,6 +568,16 @@ static int write_enable(struct spi_nor *nor) */ static int write_disable(struct spi_nor *nor) { + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRDI, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_NO_DATA); + + return spi_mem_exec_op(nor->spimem, &op); + } + return nor->write_reg(nor, SPINOR_OP_WRDI, NULL, 0); } @@ -468,12 +677,64 @@ static void spi_nor_set_4byte_opcodes(struct spi_nor *nor) } } +static int macronix_set_4byte(struct spi_nor *nor, bool enable) +{ + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(enable ? + SPINOR_OP_EN4B : + SPINOR_OP_EX4B, + 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_NO_DATA); + + return spi_mem_exec_op(nor->spimem, &op); + } + + return nor->write_reg(nor, enable ? SPINOR_OP_EN4B : SPINOR_OP_EX4B, + NULL, 0); +} + +static int spansion_set_4byte(struct spi_nor *nor, bool enable) +{ + nor->bouncebuf[0] = enable << 7; + + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_BRWR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(1, nor->bouncebuf, 1)); + + return spi_mem_exec_op(nor->spimem, &op); + } + + return nor->write_reg(nor, SPINOR_OP_BRWR, nor->bouncebuf, 1); +} + +static int spi_nor_write_ear(struct spi_nor *nor, u8 ear) +{ + nor->bouncebuf[0] = ear; + + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WREAR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(1, nor->bouncebuf, 1)); + + return spi_mem_exec_op(nor->spimem, &op); + } + + return nor->write_reg(nor, SPINOR_OP_WREAR, nor->bouncebuf, 1); +} + /* Enable/disable 4-byte addressing mode. */ static int set_4byte(struct spi_nor *nor, bool enable) { int status; bool need_wren = false; - u8 cmd; switch (JEDEC_MFR(nor->info)) { case SNOR_MFR_ST: @@ -486,8 +747,7 @@ static int set_4byte(struct spi_nor *nor, bool enable) if (need_wren) write_enable(nor); - cmd = enable ? SPINOR_OP_EN4B : SPINOR_OP_EX4B; - status = nor->write_reg(nor, cmd, NULL, 0); + status = macronix_set_4byte(nor, enable); if (need_wren) write_disable(nor); @@ -500,31 +760,58 @@ static int set_4byte(struct spi_nor *nor, bool enable) * We must clear the register to enable normal behavior. */ write_enable(nor); - nor->cmd_buf[0] = 0; - nor->write_reg(nor, SPINOR_OP_WREAR, nor->cmd_buf, 1); + spi_nor_write_ear(nor, 0); write_disable(nor); } return status; default: /* Spansion style */ - nor->cmd_buf[0] = enable << 7; - return nor->write_reg(nor, SPINOR_OP_BRWR, nor->cmd_buf, 1); + return spansion_set_4byte(nor, enable); + } +} + +static int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr) +{ + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_XRDSR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, sr, 1)); + + return spi_mem_exec_op(nor->spimem, &op); } + + return nor->read_reg(nor, SPINOR_OP_XRDSR, sr, 1); } static int s3an_sr_ready(struct spi_nor *nor) { int ret; - u8 val; - ret = nor->read_reg(nor, SPINOR_OP_XRDSR, &val, 1); + ret = spi_nor_xread_sr(nor, nor->bouncebuf); if (ret < 0) { dev_err(nor->dev, "error %d reading XRDSR\n", (int) ret); return ret; } - return !!(val & XSR_RDY); + return !!(nor->bouncebuf[0] & XSR_RDY); +} + +static int spi_nor_clear_sr(struct spi_nor *nor) +{ + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLSR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_NO_DATA); + + return spi_mem_exec_op(nor->spimem, &op); + } + + return nor->write_reg(nor, SPINOR_OP_CLSR, NULL, 0); } static int spi_nor_sr_ready(struct spi_nor *nor) @@ -539,13 +826,28 @@ static int spi_nor_sr_ready(struct spi_nor *nor) else dev_err(nor->dev, "Programming Error occurred\n"); - nor->write_reg(nor, SPINOR_OP_CLSR, NULL, 0); + spi_nor_clear_sr(nor); return -EIO; } return !(sr & SR_WIP); } +static int spi_nor_clear_fsr(struct spi_nor *nor) +{ + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLFSR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_NO_DATA); + + return spi_mem_exec_op(nor->spimem, &op); + } + + return nor->write_reg(nor, SPINOR_OP_CLFSR, NULL, 0); +} + static int spi_nor_fsr_ready(struct spi_nor *nor) { int fsr = read_fsr(nor); @@ -562,7 +864,7 @@ static int spi_nor_fsr_ready(struct spi_nor *nor) dev_err(nor->dev, "Attempted to modify a protected sector.\n"); - nor->write_reg(nor, SPINOR_OP_CLFSR, NULL, 0); + spi_nor_clear_fsr(nor); return -EIO; } @@ -630,6 +932,16 @@ static int erase_chip(struct spi_nor *nor) { dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd.size >> 10)); + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CHIP_ERASE, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_NO_DATA); + + return spi_mem_exec_op(nor->spimem, &op); + } + return nor->write_reg(nor, SPINOR_OP_CHIP_ERASE, NULL, 0); } @@ -683,7 +995,6 @@ static loff_t spi_nor_s3an_addr_convert(struct spi_nor *nor, unsigned int addr) */ static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr) { - u8 buf[SPI_NOR_MAX_ADDR_WIDTH]; int i; if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT) @@ -692,16 +1003,27 @@ static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr) if (nor->erase) return nor->erase(nor, addr); + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(nor->erase_opcode, 1), + SPI_MEM_OP_ADDR(nor->addr_width, addr, 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_NO_DATA); + + return spi_mem_exec_op(nor->spimem, &op); + } + /* * Default implementation, if driver doesn't have a specialized HW * control */ for (i = nor->addr_width - 1; i >= 0; i--) { - buf[i] = addr & 0xff; + nor->bouncebuf[i] = addr & 0xff; addr >>= 8; } - return nor->write_reg(nor, nor->erase_opcode, buf, nor->addr_width); + return nor->write_reg(nor, nor->erase_opcode, nor->bouncebuf, + nor->addr_width); } /** @@ -1406,7 +1728,18 @@ static int write_sr_cr(struct spi_nor *nor, u8 *sr_cr) write_enable(nor); - ret = nor->write_reg(nor, SPINOR_OP_WRSR, sr_cr, 2); + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(2, sr_cr, 1)); + + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->write_reg(nor, SPINOR_OP_WRSR, sr_cr, 2); + } + if (ret < 0) { dev_err(nor->dev, "error while writing configuration register\n"); @@ -1485,9 +1818,11 @@ static int macronix_quad_enable(struct spi_nor *nor) */ static int spansion_quad_enable(struct spi_nor *nor) { - u8 sr_cr[2] = {0, CR_QUAD_EN_SPAN}; + u8 *sr_cr = nor->bouncebuf; int ret; + sr_cr[0] = 0; + sr_cr[1] = CR_QUAD_EN_SPAN; ret = write_sr_cr(nor, sr_cr); if (ret) return ret; @@ -1517,7 +1852,7 @@ static int spansion_quad_enable(struct spi_nor *nor) */ static int spansion_no_read_cr_quad_enable(struct spi_nor *nor) { - u8 sr_cr[2]; + u8 *sr_cr = nor->bouncebuf; int ret; /* Keep the current value of the Status Register. */ @@ -1548,7 +1883,7 @@ static int spansion_no_read_cr_quad_enable(struct spi_nor *nor) static int spansion_read_cr_quad_enable(struct spi_nor *nor) { struct device *dev = nor->dev; - u8 sr_cr[2]; + u8 *sr_cr = nor->bouncebuf; int ret; /* Check current Quad Enable bit value. */ @@ -1585,6 +1920,36 @@ static int spansion_read_cr_quad_enable(struct spi_nor *nor) return 0; } +static int spi_nor_write_sr2(struct spi_nor *nor, u8 *sr2) +{ + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR2, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(1, sr2, 1)); + + return spi_mem_exec_op(nor->spimem, &op); + } + + return nor->write_reg(nor, SPINOR_OP_WRSR2, sr2, 1); +} + +static int spi_nor_read_sr2(struct spi_nor *nor, u8 *sr2) +{ + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR2, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, sr2, 1)); + + return spi_mem_exec_op(nor->spimem, &op); + } + + return nor->read_reg(nor, SPINOR_OP_RDSR2, sr2, 1); +} + /** * sr2_bit7_quad_enable() - set QE bit in Status Register 2. * @nor: pointer to a 'struct spi_nor' @@ -1599,22 +1964,22 @@ static int spansion_read_cr_quad_enable(struct spi_nor *nor) */ static int sr2_bit7_quad_enable(struct spi_nor *nor) { - u8 sr2; + u8 *sr2 = nor->bouncebuf; int ret; /* Check current Quad Enable bit value. */ - ret = nor->read_reg(nor, SPINOR_OP_RDSR2, &sr2, 1); + ret = spi_nor_read_sr2(nor, sr2); if (ret) return ret; - if (sr2 & SR2_QUAD_EN_BIT7) + if (*sr2 & SR2_QUAD_EN_BIT7) return 0; /* Update the Quad Enable bit. */ - sr2 |= SR2_QUAD_EN_BIT7; + *sr2 |= SR2_QUAD_EN_BIT7; write_enable(nor); - ret = nor->write_reg(nor, SPINOR_OP_WRSR2, &sr2, 1); + ret = spi_nor_write_sr2(nor, sr2); if (ret < 0) { dev_err(nor->dev, "error while writing status register 2\n"); return -EINVAL; @@ -1627,8 +1992,8 @@ static int sr2_bit7_quad_enable(struct spi_nor *nor) } /* Read back and check it. */ - ret = nor->read_reg(nor, SPINOR_OP_RDSR2, &sr2, 1); - if (!(ret > 0 && (sr2 & SR2_QUAD_EN_BIT7))) { + ret = spi_nor_read_sr2(nor, sr2); + if (!(ret > 0 && (*sr2 & SR2_QUAD_EN_BIT7))) { dev_err(nor->dev, "SR2 Quad bit not set\n"); return -EINVAL; } @@ -1687,7 +2052,7 @@ static int spi_nor_spansion_clear_sr_bp(struct spi_nor *nor) { int ret; u8 mask = SR_BP2 | SR_BP1 | SR_BP0; - u8 sr_cr[2] = {0}; + u8 *sr_cr = nor->bouncebuf; /* Check current Quad Enable bit value. */ ret = read_cr(nor); @@ -2022,7 +2387,7 @@ static const struct flash_info spi_nor_ids[] = { { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) }, { "s25fl512s", INFO6(0x010220, 0x4d0080, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | - SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | USE_CLSR) }, + SPI_NOR_HAS_LOCK | USE_CLSR) }, { "s25fs512s", INFO6(0x010220, 0x4d0081, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) }, { "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) }, { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) }, @@ -2060,6 +2425,8 @@ static const struct flash_info spi_nor_ids[] = { { "sst25wf040b", INFO(0x621613, 0, 64 * 1024, 8, SECT_4K) }, { "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) }, { "sst25wf080", INFO(0xbf2505, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) }, + { "sst26wf016b", INFO(0xbf2651, 0, 64 * 1024, 32, SECT_4K | + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, /* ST Microelectronics -- newer production may have feature updates */ @@ -2151,6 +2518,8 @@ static const struct flash_info spi_nor_ids[] = { { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) }, { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) }, { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) }, @@ -2177,10 +2546,21 @@ static const struct flash_info spi_nor_ids[] = { static const struct flash_info *spi_nor_read_id(struct spi_nor *nor) { int tmp; - u8 id[SPI_NOR_MAX_ID_LEN]; + u8 *id = nor->bouncebuf; const struct flash_info *info; - tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN); + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDID, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(SPI_NOR_MAX_ID_LEN, id, 1)); + + tmp = spi_mem_exec_op(nor->spimem, &op); + } else { + tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, + SPI_NOR_MAX_ID_LEN); + } if (tmp < 0) { dev_err(nor->dev, "error %d reading JEDEC ID\n", tmp); return ERR_PTR(tmp); @@ -2216,7 +2596,7 @@ static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len, if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT) addr = spi_nor_s3an_addr_convert(nor, addr); - ret = nor->read(nor, addr, len, buf); + ret = spi_nor_read_data(nor, addr, len, buf); if (ret == 0) { /* We shouldn't see 0-length reads */ ret = -EIO; @@ -2261,7 +2641,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, nor->program_opcode = SPINOR_OP_BP; /* write one byte. */ - ret = nor->write(nor, to, 1, buf); + ret = spi_nor_write_data(nor, to, 1, buf); if (ret < 0) goto sst_write_err; WARN(ret != 1, "While writing 1 byte written %i bytes\n", @@ -2277,7 +2657,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, nor->program_opcode = SPINOR_OP_AAI_WP; /* write two bytes. */ - ret = nor->write(nor, to, 2, buf + actual); + ret = spi_nor_write_data(nor, to, 2, buf + actual); if (ret < 0) goto sst_write_err; WARN(ret != 2, "While writing 2 bytes written %i bytes\n", @@ -2300,7 +2680,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, write_enable(nor); nor->program_opcode = SPINOR_OP_BP; - ret = nor->write(nor, to, 1, buf + actual); + ret = spi_nor_write_data(nor, to, 1, buf + actual); if (ret < 0) goto sst_write_err; WARN(ret != 1, "While writing 1 byte written %i bytes\n", @@ -2362,7 +2742,7 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len, addr = spi_nor_s3an_addr_convert(nor, addr); write_enable(nor); - ret = nor->write(nor, addr, page_remain, buf + i); + ret = spi_nor_write_data(nor, addr, page_remain, buf + i); if (ret < 0) goto write_err; written = ret; @@ -2381,8 +2761,10 @@ write_err: static int spi_nor_check(struct spi_nor *nor) { - if (!nor->dev || !nor->read || !nor->write || - !nor->read_reg || !nor->write_reg) { + if (!nor->dev || + (!nor->spimem && + (!nor->read || !nor->write || !nor->read_reg || + !nor->write_reg))) { pr_err("spi-nor: please fill all the necessary fields!\n"); return -EINVAL; } @@ -2393,9 +2775,8 @@ static int spi_nor_check(struct spi_nor *nor) static int s3an_nor_scan(struct spi_nor *nor) { int ret; - u8 val; - ret = nor->read_reg(nor, SPINOR_OP_XRDSR, &val, 1); + ret = spi_nor_xread_sr(nor, nor->bouncebuf); if (ret < 0) { dev_err(nor->dev, "error %d reading XRDSR\n", (int) ret); return ret; @@ -2417,7 +2798,7 @@ static int s3an_nor_scan(struct spi_nor *nor) * The current addressing mode can be read from the XRDSR register * and should not be changed, because is a destructive operation. */ - if (val & XSR_PAGESIZE) { + if (nor->bouncebuf[0] & XSR_PAGESIZE) { /* Flash in Power of 2 mode */ nor->page_size = (nor->page_size == 264) ? 256 : 512; nor->mtd.writebufsize = nor->page_size; @@ -2525,11 +2906,11 @@ static int spi_nor_read_raw(struct spi_nor *nor, u32 addr, size_t len, u8 *buf) int ret; while (len) { - ret = nor->read(nor, addr, len, buf); - if (!ret || ret > len) - return -EIO; + ret = spi_nor_read_data(nor, addr, len, buf); if (ret < 0) return ret; + if (!ret || ret > len) + return -EIO; buf += ret; addr += ret; @@ -2575,6 +2956,129 @@ static int spi_nor_read_sfdp(struct spi_nor *nor, u32 addr, } /** + * spi_nor_spimem_check_op - check if the operation is supported + * by controller + *@nor: pointer to a 'struct spi_nor' + *@op: pointer to op template to be checked + * + * Returns 0 if operation is supported, -ENOTSUPP otherwise. + */ +static int spi_nor_spimem_check_op(struct spi_nor *nor, + struct spi_mem_op *op) +{ + /* + * First test with 4 address bytes. The opcode itself might + * be a 3B addressing opcode but we don't care, because + * SPI controller implementation should not check the opcode, + * but just the sequence. + */ + op->addr.nbytes = 4; + if (!spi_mem_supports_op(nor->spimem, op)) { + if (nor->mtd.size > SZ_16M) + return -ENOTSUPP; + + /* If flash size <= 16MB, 3 address bytes are sufficient */ + op->addr.nbytes = 3; + if (!spi_mem_supports_op(nor->spimem, op)) + return -ENOTSUPP; + } + + return 0; +} + +/** + * spi_nor_spimem_check_readop - check if the read op is supported + * by controller + *@nor: pointer to a 'struct spi_nor' + *@read: pointer to op template to be checked + * + * Returns 0 if operation is supported, -ENOTSUPP otherwise. + */ +static int spi_nor_spimem_check_readop(struct spi_nor *nor, + const struct spi_nor_read_command *read) +{ + struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(read->opcode, 1), + SPI_MEM_OP_ADDR(3, 0, 1), + SPI_MEM_OP_DUMMY(0, 1), + SPI_MEM_OP_DATA_IN(0, NULL, 1)); + + op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(read->proto); + op.addr.buswidth = spi_nor_get_protocol_addr_nbits(read->proto); + op.data.buswidth = spi_nor_get_protocol_data_nbits(read->proto); + op.dummy.buswidth = op.addr.buswidth; + op.dummy.nbytes = (read->num_mode_clocks + read->num_wait_states) * + op.dummy.buswidth / 8; + + return spi_nor_spimem_check_op(nor, &op); +} + +/** + * spi_nor_spimem_check_pp - check if the page program op is supported + * by controller + *@nor: pointer to a 'struct spi_nor' + *@pp: pointer to op template to be checked + * + * Returns 0 if operation is supported, -ENOTSUPP otherwise. + */ +static int spi_nor_spimem_check_pp(struct spi_nor *nor, + const struct spi_nor_pp_command *pp) +{ + struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(pp->opcode, 1), + SPI_MEM_OP_ADDR(3, 0, 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(0, NULL, 1)); + + op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(pp->proto); + op.addr.buswidth = spi_nor_get_protocol_addr_nbits(pp->proto); + op.data.buswidth = spi_nor_get_protocol_data_nbits(pp->proto); + + return spi_nor_spimem_check_op(nor, &op); +} + +/** + * spi_nor_spimem_adjust_hwcaps - Find optimal Read/Write protocol + * based on SPI controller capabilities + * @nor: pointer to a 'struct spi_nor' + * @params: pointer to the 'struct spi_nor_flash_parameter' + * representing SPI NOR flash capabilities + * @hwcaps: pointer to resulting capabilities after adjusting + * according to controller and flash's capability + */ +static void +spi_nor_spimem_adjust_hwcaps(struct spi_nor *nor, + const struct spi_nor_flash_parameter *params, + u32 *hwcaps) +{ + unsigned int cap; + + /* DTR modes are not supported yet, mask them all. */ + *hwcaps &= ~SNOR_HWCAPS_DTR; + + /* X-X-X modes are not supported yet, mask them all. */ + *hwcaps &= ~SNOR_HWCAPS_X_X_X; + + for (cap = 0; cap < sizeof(*hwcaps) * BITS_PER_BYTE; cap++) { + int rdidx, ppidx; + + if (!(*hwcaps & BIT(cap))) + continue; + + rdidx = spi_nor_hwcaps_read2cmd(BIT(cap)); + if (rdidx >= 0 && + spi_nor_spimem_check_readop(nor, ¶ms->reads[rdidx])) + *hwcaps &= ~BIT(cap); + + ppidx = spi_nor_hwcaps_pp2cmd(BIT(cap)); + if (ppidx < 0) + continue; + + if (spi_nor_spimem_check_pp(nor, + ¶ms->page_programs[ppidx])) + *hwcaps &= ~BIT(cap); + } +} + +/** * spi_nor_read_sfdp_dma_unsafe() - read Serial Flash Discoverable Parameters. * @nor: pointer to a 'struct spi_nor' * @addr: offset in the SFDP area to start reading data from @@ -3453,7 +3957,7 @@ static int spi_nor_parse_4bait(struct spi_nor *nor, addr = SFDP_PARAM_HEADER_PTP(param_header); ret = spi_nor_read_sfdp(nor, addr, len, dwords); if (ret) - return ret; + goto out; /* Fix endianness of the 4BAIT DWORDs. */ for (i = 0; i < SFDP_4BAIT_DWORD_MAX; i++) @@ -3981,16 +4485,25 @@ static int spi_nor_setup(struct spi_nor *nor, */ shared_mask = hwcaps->mask & params->hwcaps.mask; - /* SPI n-n-n protocols are not supported yet. */ - ignored_mask = (SNOR_HWCAPS_READ_2_2_2 | - SNOR_HWCAPS_READ_4_4_4 | - SNOR_HWCAPS_READ_8_8_8 | - SNOR_HWCAPS_PP_4_4_4 | - SNOR_HWCAPS_PP_8_8_8); - if (shared_mask & ignored_mask) { - dev_dbg(nor->dev, - "SPI n-n-n protocols are not supported yet.\n"); - shared_mask &= ~ignored_mask; + if (nor->spimem) { + /* + * When called from spi_nor_probe(), all caps are set and we + * need to discard some of them based on what the SPI + * controller actually supports (using spi_mem_supports_op()). + */ + spi_nor_spimem_adjust_hwcaps(nor, params, &shared_mask); + } else { + /* + * SPI n-n-n protocols are not supported when the SPI + * controller directly implements the spi_nor interface. + * Yet another reason to switch to spi-mem. + */ + ignored_mask = SNOR_HWCAPS_X_X_X; + if (shared_mask & ignored_mask) { + dev_dbg(nor->dev, + "SPI n-n-n protocols are not supported.\n"); + shared_mask &= ~ignored_mask; + } } /* Select the (Fast) Read command. */ @@ -4122,6 +4635,20 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, nor->read_proto = SNOR_PROTO_1_1_1; nor->write_proto = SNOR_PROTO_1_1_1; + /* + * We need the bounce buffer early to read/write registers when going + * through the spi-mem layer (buffers have to be DMA-able). + * For spi-mem drivers, we'll reallocate a new buffer if + * nor->page_size turns out to be greater than PAGE_SIZE (which + * shouldn't happen before long since NOR pages are usually less + * than 1KB) after spi_nor_scan() returns. + */ + nor->bouncebuf_size = PAGE_SIZE; + nor->bouncebuf = devm_kmalloc(dev, nor->bouncebuf_size, + GFP_KERNEL); + if (!nor->bouncebuf) + return -ENOMEM; + if (name) info = spi_nor_match_id(name); /* Try to auto-detect if chip name wasn't specified or not found */ @@ -4317,6 +4844,174 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, } EXPORT_SYMBOL_GPL(spi_nor_scan); +static int spi_nor_probe(struct spi_mem *spimem) +{ + struct spi_device *spi = spimem->spi; + struct flash_platform_data *data = dev_get_platdata(&spi->dev); + struct spi_nor *nor; + /* + * Enable all caps by default. The core will mask them after + * checking what's really supported using spi_mem_supports_op(). + */ + const struct spi_nor_hwcaps hwcaps = { .mask = SNOR_HWCAPS_ALL }; + char *flash_name; + int ret; + + nor = devm_kzalloc(&spi->dev, sizeof(*nor), GFP_KERNEL); + if (!nor) + return -ENOMEM; + + nor->spimem = spimem; + nor->dev = &spi->dev; + spi_nor_set_flash_node(nor, spi->dev.of_node); + + spi_mem_set_drvdata(spimem, nor); + + if (data && data->name) + nor->mtd.name = data->name; + + if (!nor->mtd.name) + nor->mtd.name = spi_mem_get_name(spimem); + + /* + * For some (historical?) reason many platforms provide two different + * names in flash_platform_data: "name" and "type". Quite often name is + * set to "m25p80" and then "type" provides a real chip name. + * If that's the case, respect "type" and ignore a "name". + */ + if (data && data->type) + flash_name = data->type; + else if (!strcmp(spi->modalias, "spi-nor")) + flash_name = NULL; /* auto-detect */ + else + flash_name = spi->modalias; + + ret = spi_nor_scan(nor, flash_name, &hwcaps); + if (ret) + return ret; + + /* + * None of the existing parts have > 512B pages, but let's play safe + * and add this logic so that if anyone ever adds support for such + * a NOR we don't end up with buffer overflows. + */ + if (nor->page_size > PAGE_SIZE) { + nor->bouncebuf_size = nor->page_size; + devm_kfree(nor->dev, nor->bouncebuf); + nor->bouncebuf = devm_kmalloc(nor->dev, + nor->bouncebuf_size, + GFP_KERNEL); + if (!nor->bouncebuf) + return -ENOMEM; + } + + return mtd_device_register(&nor->mtd, data ? data->parts : NULL, + data ? data->nr_parts : 0); +} + +static int spi_nor_remove(struct spi_mem *spimem) +{ + struct spi_nor *nor = spi_mem_get_drvdata(spimem); + + spi_nor_restore(nor); + + /* Clean up MTD stuff. */ + return mtd_device_unregister(&nor->mtd); +} + +static void spi_nor_shutdown(struct spi_mem *spimem) +{ + struct spi_nor *nor = spi_mem_get_drvdata(spimem); + + spi_nor_restore(nor); +} + +/* + * Do NOT add to this array without reading the following: + * + * Historically, many flash devices are bound to this driver by their name. But + * since most of these flash are compatible to some extent, and their + * differences can often be differentiated by the JEDEC read-ID command, we + * encourage new users to add support to the spi-nor library, and simply bind + * against a generic string here (e.g., "jedec,spi-nor"). + * + * Many flash names are kept here in this list (as well as in spi-nor.c) to + * keep them available as module aliases for existing platforms. + */ +static const struct spi_device_id spi_nor_dev_ids[] = { + /* + * Allow non-DT platform devices to bind to the "spi-nor" modalias, and + * hack around the fact that the SPI core does not provide uevent + * matching for .of_match_table + */ + {"spi-nor"}, + + /* + * Entries not used in DTs that should be safe to drop after replacing + * them with "spi-nor" in platform data. + */ + {"s25sl064a"}, {"w25x16"}, {"m25p10"}, {"m25px64"}, + + /* + * Entries that were used in DTs without "jedec,spi-nor" fallback and + * should be kept for backward compatibility. + */ + {"at25df321a"}, {"at25df641"}, {"at26df081a"}, + {"mx25l4005a"}, {"mx25l1606e"}, {"mx25l6405d"}, {"mx25l12805d"}, + {"mx25l25635e"},{"mx66l51235l"}, + {"n25q064"}, {"n25q128a11"}, {"n25q128a13"}, {"n25q512a"}, + {"s25fl256s1"}, {"s25fl512s"}, {"s25sl12801"}, {"s25fl008k"}, + {"s25fl064k"}, + {"sst25vf040b"},{"sst25vf016b"},{"sst25vf032b"},{"sst25wf040"}, + {"m25p40"}, {"m25p80"}, {"m25p16"}, {"m25p32"}, + {"m25p64"}, {"m25p128"}, + {"w25x80"}, {"w25x32"}, {"w25q32"}, {"w25q32dw"}, + {"w25q80bl"}, {"w25q128"}, {"w25q256"}, + + /* Flashes that can't be detected using JEDEC */ + {"m25p05-nonjedec"}, {"m25p10-nonjedec"}, {"m25p20-nonjedec"}, + {"m25p40-nonjedec"}, {"m25p80-nonjedec"}, {"m25p16-nonjedec"}, + {"m25p32-nonjedec"}, {"m25p64-nonjedec"}, {"m25p128-nonjedec"}, + + /* Everspin MRAMs (non-JEDEC) */ + { "mr25h128" }, /* 128 Kib, 40 MHz */ + { "mr25h256" }, /* 256 Kib, 40 MHz */ + { "mr25h10" }, /* 1 Mib, 40 MHz */ + { "mr25h40" }, /* 4 Mib, 40 MHz */ + + { }, +}; +MODULE_DEVICE_TABLE(spi, spi_nor_dev_ids); + +static const struct of_device_id spi_nor_of_table[] = { + /* + * Generic compatibility for SPI NOR that can be identified by the + * JEDEC READ ID opcode (0x9F). Use this, if possible. + */ + { .compatible = "jedec,spi-nor" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, spi_nor_of_table); + +/* + * REVISIT: many of these chips have deep power-down modes, which + * should clearly be entered on suspend() to minimize power use. + * And also when they're otherwise idle... + */ +static struct spi_mem_driver spi_nor_driver = { + .spidrv = { + .driver = { + .name = "spi-nor", + .of_match_table = spi_nor_of_table, + }, + .id_table = spi_nor_dev_ids, + }, + .probe = spi_nor_probe, + .remove = spi_nor_remove, + .shutdown = spi_nor_shutdown, +}; +module_spi_mem_driver(spi_nor_driver); + MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Huang Shijie <shijie8@gmail.com>"); MODULE_AUTHOR("Mike Lavender"); diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 9f57cdfcc93d..63560b375168 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -9,6 +9,7 @@ #include <linux/bitops.h> #include <linux/mtd/cfi.h> #include <linux/mtd/mtd.h> +#include <linux/spi/spi-mem.h> /* * Manufacturer IDs @@ -344,6 +345,10 @@ struct flash_info; * @mtd: point to a mtd_info structure * @lock: the lock for the read/write/erase/lock/unlock operations * @dev: point to a spi device, or a spi nor controller device. + * @spimem: point to the spi mem device + * @bouncebuf: bounce buffer used when the buffer passed by the MTD + * layer is not DMA-able + * @bouncebuf_size: size of the bounce buffer * @info: spi-nor part JDEC MFR id and other info * @page_size: the page size of the SPI NOR * @addr_width: number of address bytes @@ -356,7 +361,6 @@ struct flash_info; * @read_proto: the SPI protocol for read operations * @write_proto: the SPI protocol for write operations * @reg_proto the SPI protocol for read_reg/write_reg/erase operations - * @cmd_buf: used by the write_reg * @erase_map: the erase map of the SPI NOR * @prepare: [OPTIONAL] do some preparations for the * read/write/erase/lock/unlock operations @@ -372,16 +376,19 @@ struct flash_info; * @flash_lock: [FLASH-SPECIFIC] lock a region of the SPI NOR * @flash_unlock: [FLASH-SPECIFIC] unlock a region of the SPI NOR * @flash_is_locked: [FLASH-SPECIFIC] check if a region of the SPI NOR is + * completely locked * @quad_enable: [FLASH-SPECIFIC] enables SPI NOR quad mode * @clear_sr_bp: [FLASH-SPECIFIC] clears the Block Protection Bits from * the SPI NOR Status Register. - * completely locked * @priv: the private data */ struct spi_nor { struct mtd_info mtd; struct mutex lock; struct device *dev; + struct spi_mem *spimem; + u8 *bouncebuf; + size_t bouncebuf_size; const struct flash_info *info; u32 page_size; u8 addr_width; @@ -394,7 +401,6 @@ struct spi_nor { enum spi_nor_protocol reg_proto; bool sst_write_second; u32 flags; - u8 cmd_buf[SPI_NOR_MAX_CMD_SIZE]; struct spi_nor_erase_map erase_map; int (*prepare)(struct spi_nor *nor, enum spi_nor_ops ops); @@ -518,6 +524,20 @@ struct spi_nor_hwcaps { #define SNOR_HWCAPS_PP_1_8_8 BIT(21) #define SNOR_HWCAPS_PP_8_8_8 BIT(22) +#define SNOR_HWCAPS_X_X_X (SNOR_HWCAPS_READ_2_2_2 | \ + SNOR_HWCAPS_READ_4_4_4 | \ + SNOR_HWCAPS_READ_8_8_8 | \ + SNOR_HWCAPS_PP_4_4_4 | \ + SNOR_HWCAPS_PP_8_8_8) + +#define SNOR_HWCAPS_DTR (SNOR_HWCAPS_READ_1_1_1_DTR | \ + SNOR_HWCAPS_READ_1_2_2_DTR | \ + SNOR_HWCAPS_READ_1_4_4_DTR | \ + SNOR_HWCAPS_READ_1_8_8_DTR) + +#define SNOR_HWCAPS_ALL (SNOR_HWCAPS_READ_MASK | \ + SNOR_HWCAPS_PP_MASK) + /** * spi_nor_scan() - scan the SPI NOR * @nor: the spi_nor structure |