diff options
Diffstat (limited to 'Documentation/devicetree/bindings/fpga/altr,fpga-passive-serial.yaml')
-rw-r--r-- | Documentation/devicetree/bindings/fpga/altr,fpga-passive-serial.yaml | 74 |
1 files changed, 74 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/fpga/altr,fpga-passive-serial.yaml b/Documentation/devicetree/bindings/fpga/altr,fpga-passive-serial.yaml new file mode 100644 index 000000000000..ffb7cc54556f --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/altr,fpga-passive-serial.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fpga/altr,fpga-passive-serial.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera Passive Serial SPI FPGA Manager + +maintainers: + - Fabio Estevam <festevam@denx.de> + +description: | + Altera FPGAs support a method of loading the bitstream over what is + referred to as "passive serial". + The passive serial link is not technically SPI, and might require extra + circuits in order to play nicely with other SPI slaves on the same bus. + + See https://www.altera.com/literature/hb/cyc/cyc_c51013.pdf + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - altr,fpga-passive-serial + - altr,fpga-arria10-passive-serial + + spi-max-frequency: + maximum: 20000000 + + reg: + maxItems: 1 + + nconfig-gpios: + description: + Config pin (referred to as nCONFIG in the manual). + maxItems: 1 + + nstat-gpios: + description: + Status pin (referred to as nSTATUS in the manual). + maxItems: 1 + + confd-gpios: + description: + confd pin (referred to as CONF_DONE in the manual) + maxItems: 1 + +required: + - compatible + - reg + - nconfig-gpios + - nstat-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + fpga@0 { + compatible = "altr,fpga-passive-serial"; + reg = <0>; + nconfig-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; + nstat-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; + confd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + }; + }; +... |