diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net')
17 files changed, 516 insertions, 139 deletions
diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml index 1f133f4a2924..0467441d7037 100644 --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml @@ -74,17 +74,60 @@ allOf: Any configuration is ignored when the phy-mode is set to "rmii". amlogic,rx-delay-ns: + deprecated: true enum: - 0 - 2 default: 0 description: - The internal RGMII RX clock delay (provided by this IP block) in - nanoseconds. When phy-mode is set to "rgmii" then the RX delay - should be explicitly configured. When the phy-mode is set to - either "rgmii-id" or "rgmii-rxid" the RX clock delay is already - provided by the PHY. Any configuration is ignored when the - phy-mode is set to "rmii". + The internal RGMII RX clock delay in nanoseconds. Deprecated, use + rx-internal-delay-ps instead. + + rx-internal-delay-ps: + default: 0 + + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson8b-dwmac + - amlogic,meson8m2-dwmac + - amlogic,meson-gxbb-dwmac + - amlogic,meson-axg-dwmac + then: + properties: + rx-internal-delay-ps: + enum: + - 0 + - 2000 + + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson-g12a-dwmac + then: + properties: + rx-internal-delay-ps: + enum: + - 0 + - 200 + - 400 + - 600 + - 800 + - 1000 + - 1200 + - 1400 + - 1600 + - 1800 + - 2000 + - 2200 + - 2400 + - 2600 + - 2800 + - 3000 properties: compatible: diff --git a/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml b/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml new file mode 100644 index 000000000000..79c38ea14237 --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/brcm,bcm4908-enet.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM4908 Ethernet controller + +description: Broadcom's Ethernet controller integrated into BCM4908 family SoCs + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + const: brcm,bcm4908-enet + + reg: + maxItems: 1 + + interrupts: + description: RX interrupt + + interrupt-names: + const: rx + +required: + - reg + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + ethernet@80002000 { + compatible = "brcm,bcm4908-enet"; + reg = <0x80002000 0x1000>; + + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rx"; + }; diff --git a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt index 97ca62b0e14d..d0935d2afef8 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt +++ b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt @@ -1,108 +1,13 @@ * Broadcom Starfighter 2 integrated swich -Required properties: +See dsa/brcm,bcm7445-switch-v4.0.yaml for the documentation. -- compatible: should be one of - "brcm,bcm7445-switch-v4.0" - "brcm,bcm7278-switch-v4.0" - "brcm,bcm7278-switch-v4.8" -- reg: addresses and length of the register sets for the device, must be 6 - pairs of register addresses and lengths -- interrupts: interrupts for the devices, must be two interrupts -- #address-cells: must be 1, see dsa/dsa.txt -- #size-cells: must be 0, see dsa/dsa.txt - -Deprecated binding required properties: +*Deprecated* binding required properties: - dsa,mii-bus: phandle to the MDIO bus controller, see dsa/dsa.txt - dsa,ethernet: phandle to the CPU network interface controller, see dsa/dsa.txt - #address-cells: must be 2, see dsa/dsa.txt -Subnodes: - -The integrated switch subnode should be specified according to the binding -described in dsa/dsa.txt. - -Optional properties: - -- reg-names: litteral names for the device base register addresses, when present - must be: "core", "reg", "intrl2_0", "intrl2_1", "fcb", "acb" - -- interrupt-names: litternal names for the device interrupt lines, when present - must be: "switch_0" and "switch_1" - -- brcm,num-gphy: specify the maximum number of integrated gigabit PHYs in the - switch - -- brcm,num-rgmii-ports: specify the maximum number of RGMII interfaces supported - by the switch - -- brcm,fcb-pause-override: boolean property, if present indicates that the switch - supports Failover Control Block pause override capability - -- brcm,acb-packets-inflight: boolean property, if present indicates that the switch - Admission Control Block supports reporting the number of packets in-flight in a - switch queue - -- resets: a single phandle and reset identifier pair. See - Documentation/devicetree/bindings/reset/reset.txt for details. - -- reset-names: If the "reset" property is specified, this property should have - the value "switch" to denote the switch reset line. - -- clocks: when provided, the first phandle is to the switch's main clock and - is valid for both BCM7445 and BCM7278. The second phandle is only applicable - to BCM7445 and is to support dividing the switch core clock. - -- clock-names: when provided, the first phandle must be "sw_switch", and the - second must be named "sw_switch_mdiv". - -Port subnodes: - -Optional properties: - -- brcm,use-bcm-hdr: boolean property, if present, indicates that the switch - port has Broadcom tags enabled (per-packet metadata) - -Example: - -switch_top@f0b00000 { - compatible = "simple-bus"; - #size-cells = <1>; - #address-cells = <1>; - ranges = <0 0xf0b00000 0x40804>; - - ethernet_switch@0 { - compatible = "brcm,bcm7445-switch-v4.0"; - #size-cells = <0>; - #address-cells = <1>; - reg = <0x0 0x40000 - 0x40000 0x110 - 0x40340 0x30 - 0x40380 0x30 - 0x40400 0x34 - 0x40600 0x208>; - reg-names = "core", "reg", intrl2_0", "intrl2_1", - "fcb, "acb"; - interrupts = <0 0x18 0 - 0 0x19 0>; - brcm,num-gphy = <1>; - brcm,num-rgmii-ports = <2>; - brcm,fcb-pause-override; - brcm,acb-packets-inflight; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - label = "gphy"; - reg = <0>; - }; - }; - }; -}; - Example using the old DSA DeviceTree binding: switch_top@f0b00000 { @@ -132,7 +37,7 @@ switch_top@f0b00000 { switch@0 { reg = <0 0>; #size-cells = <0>; - #address-cells <1>; + #address-cells = <1>; port@0 { label = "gphy"; diff --git a/Documentation/devicetree/bindings/net/btusb.txt b/Documentation/devicetree/bindings/net/btusb.txt index b1ad6ee68e90..c51dd99dc0d3 100644 --- a/Documentation/devicetree/bindings/net/btusb.txt +++ b/Documentation/devicetree/bindings/net/btusb.txt @@ -38,7 +38,7 @@ Following example uses irq pin number 3 of gpio0 for out of band wake-on-bt: compatible = "usb1286,204e"; reg = <1>; interrupt-parent = <&gpio0>; - interrupt-name = "wakeup"; + interrupt-names = "wakeup"; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml index 0d2df30f19db..fe6a949a2eab 100644 --- a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml +++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml @@ -110,6 +110,16 @@ properties: description: Enable CAN remote wakeup. + fsl,scu-index: + description: | + The scu index of CAN instance. + For SoCs with SCU support, need setup stop mode via SCU firmware, so this + property can help indicate a resource. It supports up to 3 CAN instances + now. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 0 + maximum: 2 + required: - compatible - reg @@ -137,4 +147,5 @@ examples: clocks = <&clks 1>, <&clks 2>; clock-names = "ipg", "per"; fsl,stop-mode = <&gpr 0x34 28>; + fsl,scu-index = /bits/ 8 <1>; }; diff --git a/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml b/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml new file mode 100644 index 000000000000..3f01b65f3b22 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/arrow,xrs700x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arrow SpeedChips XRS7000 Series Switch Device Tree Bindings + +allOf: + - $ref: dsa.yaml# + +maintainers: + - George McCollister <george.mccollister@gmail.com> + +description: + The Arrow SpeedChips XRS7000 Series of single chip gigabit Ethernet switches + are designed for critical networking applications. They have up to three + RGMII ports and one RMII port and are managed via i2c or mdio. + +properties: + compatible: + oneOf: + - enum: + - arrow,xrs7003e + - arrow,xrs7003f + - arrow,xrs7004e + - arrow,xrs7004f + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + switch@8 { + compatible = "arrow,xrs7004e"; + reg = <0x8>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + ethernet-port@1 { + reg = <1>; + label = "lan0"; + phy-handle = <&swphy0>; + phy-mode = "rgmii-id"; + }; + ethernet-port@2 { + reg = <2>; + label = "lan1"; + phy-handle = <&swphy1>; + phy-mode = "rgmii-id"; + }; + ethernet-port@3 { + reg = <3>; + label = "cpu"; + ethernet = <&fec1>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml new file mode 100644 index 000000000000..d730fe5a4355 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml @@ -0,0 +1,173 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/brcm,sf2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Starfighter 2 integrated swich + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + items: + - enum: + - brcm,bcm4908-switch + - brcm,bcm7278-switch-v4.0 + - brcm,bcm7278-switch-v4.8 + - brcm,bcm7445-switch-v4.0 + + reg: + minItems: 6 + maxItems: 6 + + reg-names: + items: + - const: core + - const: reg + - const: intrl2_0 + - const: intrl2_1 + - const: fcb + - const: acb + + interrupts: + minItems: 2 + maxItems: 2 + + interrupt-names: + items: + - const: switch_0 + - const: switch_1 + + resets: + maxItems: 1 + + reset-names: + const: switch + + clocks: + minItems: 1 + maxItems: 2 + items: + - description: switch's main clock + - description: dividing of the switch core clock + + clock-names: + minItems: 1 + maxItems: 2 + items: + - const: sw_switch + - const: sw_switch_mdiv + + brcm,num-gphy: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum number of integrated gigabit PHYs in the switch + + brcm,num-rgmii-ports: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum number of RGMII interfaces supported by the switch + + brcm,fcb-pause-override: + description: if present indicates that the switch supports Failover Control + Block pause override capability + type: boolean + + brcm,acb-packets-inflight: + description: if present indicates that the switch Admission Control Block + supports reporting the number of packets in-flight in a switch queue + type: boolean + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + ports: + type: object + + properties: + brcm,use-bcm-hdr: + description: if present, indicates that the switch port has Broadcom + tags enabled (per-packet metadata) + type: boolean + +required: + - reg + - interrupts + - "#address-cells" + - "#size-cells" + +allOf: + - $ref: "dsa.yaml#" + - if: + properties: + compatible: + contains: + enum: + - brcm,bcm7278-switch-v4.0 + - brcm,bcm7278-switch-v4.8 + then: + properties: + clocks: + minItems: 1 + maxItems: 1 + clock-names: + minItems: 1 + maxItems: 1 + required: + - clocks + - clock-names + - if: + properties: + compatible: + contains: + const: brcm,bcm7445-switch-v4.0 + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + minItems: 2 + maxItems: 2 + required: + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + switch@f0b00000 { + compatible = "brcm,bcm7445-switch-v4.0"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xf0b00000 0x40000>, + <0xf0b40000 0x110>, + <0xf0b40340 0x30>, + <0xf0b40380 0x30>, + <0xf0b40400 0x34>, + <0xf0b40600 0x208>; + reg-names = "core", "reg", "intrl2_0", "intrl2_1", + "fcb", "acb"; + interrupts = <0 0x18 0>, + <0 0x19 0>; + clocks = <&sw_switch>, <&sw_switch_mdiv>; + clock-names = "sw_switch", "sw_switch_mdiv"; + brcm,num-gphy = <1>; + brcm,num-rgmii-ports = <2>; + brcm,fcb-pause-override; + brcm,acb-packets-inflight; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + label = "gphy"; + reg = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt index 560369efad6c..de04626a8e9d 100644 --- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt +++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt @@ -76,6 +76,12 @@ phy-mode must be set, see also example 2 below! * mt7621: phy-mode = "rgmii-txid"; * mt7623: phy-mode = "rgmii"; +Optional properties: + +- gpio-controller: Boolean; if defined, MT7530's LED controller will run on + GPIO mode. +- #gpio-cells: Must be 2 if gpio-controller is defined. + See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional required, optional properties and how the integrated switch subnodes must be specified. diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index dac4aadb6e2e..f599c1d9c961 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -89,6 +89,7 @@ properties: - trgmii - 1000base-x - 2500base-x + - 5gbase-r - rxaui - xaui diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt index b78397669320..ce15c173f43f 100644 --- a/Documentation/devicetree/bindings/net/marvell-pp2.txt +++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt @@ -1,5 +1,6 @@ * Marvell Armada 375 Ethernet Controller (PPv2.1) Marvell Armada 7K/8K Ethernet Controller (PPv2.2) + Marvell CN913X Ethernet Controller (PPv2.3) Required properties: @@ -12,10 +13,11 @@ Required properties: - common controller registers - LMS registers - one register area per Ethernet port - For "marvell,armada-7k-pp2", must contain the following register + For "marvell,armada-7k-pp2" used by 7K/8K and CN913X, must contain the following register sets: - packet processor registers - networking interfaces registers + - CM3 address space used for TX Flow Control - clocks: pointers to the reference clocks for this device, consequently: - main controller clock (for both armada-375-pp2 and armada-7k-pp2) @@ -81,7 +83,7 @@ Example for marvell,armada-7k-pp2: cpm_ethernet: ethernet@0 { compatible = "marvell,armada-7k-pp22"; - reg = <0x0 0x100000>, <0x129000 0xb000>; + reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>; clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>, <&cpm_syscon0 1 6>, <&cpm_syscon0 1 18>; clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk"; diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml index 64b3357ade8a..b3d4013b7ca6 100644 --- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml +++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml @@ -28,6 +28,10 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1, 2] + qca,disable-smarteee: + description: Disable Atheros SmartEEE feature. + type: boolean + qca,keep-pll-enabled: description: | If set, keep the PLL enabled even if there is no link. Useful if you @@ -36,6 +40,18 @@ properties: Only supported on the AR8031. type: boolean + qca,smarteee-tw-us-100m: + description: EEE Tw parameter for 100M links. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 255 + + qca,smarteee-tw-us-1g: + description: EEE Tw parameter for gigabit links. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 255 + vddio-supply: description: | RGMII I/O voltage regulator (see regulator/regulator.yaml). diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index 8a2d12644675..8f86084bf12e 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -113,13 +113,6 @@ properties: performing early IPA initialization, including loading and validating firwmare used by the GSI. - modem-remoteproc: - $ref: /schemas/types.yaml#/definitions/phandle - description: - This defines the phandle to the remoteproc node representing - the modem subsystem. This is requied so the IPA driver can - receive and act on notifications of modem up/down events. - memory-region: maxItems: 1 description: @@ -135,7 +128,6 @@ required: - interrupts - interconnects - qcom,smem-states - - modem-remoteproc oneOf: - required: @@ -147,7 +139,7 @@ additionalProperties: false examples: - | - #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interconnect/qcom,sdm845.h> @@ -168,7 +160,6 @@ examples: compatible = "qcom,sdm845-ipa"; modem-init; - modem-remoteproc = <&mss_pil>; iommus = <&apps_smmu 0x720 0x3>; reg = <0x1e40000 0x7000>, @@ -178,8 +169,8 @@ examples: "ipa-shared", "gsi"; - interrupts-extended = <&intc 0 311 IRQ_TYPE_EDGE_RISING>, - <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ipa", diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml index de9dd574a2f9..91ba96d43c6c 100644 --- a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml +++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml @@ -40,6 +40,7 @@ properties: - renesas,etheravb-r8a77980 # R-Car V3H - renesas,etheravb-r8a77990 # R-Car E3 - renesas,etheravb-r8a77995 # R-Car D3 + - renesas,etheravb-r8a779a0 # R-Car V3U - const: renesas,etheravb-rcar-gen3 # R-Car Gen3 and RZ/G2 reg: true @@ -170,6 +171,7 @@ allOf: - renesas,etheravb-r8a77965 - renesas,etheravb-r8a77970 - renesas,etheravb-r8a77980 + - renesas,etheravb-r8a779a0 then: required: - tx-internal-delay-ps diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index c47b58f3e3f6..3fae9a5f0c6a 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/net/ti,k3-am654-cpsw-nuss.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: The TI AM654x/J721E SoC Gigabit Ethernet MAC (Media Access Controller) Device Tree Bindings +title: The TI AM654x/J721E/AM642x SoC Gigabit Ethernet MAC (Media Access Controller) Device Tree Bindings maintainers: - Grygorii Strashko <grygorii.strashko@ti.com> @@ -13,19 +13,16 @@ maintainers: description: The TI AM654x/J721E SoC Gigabit Ethernet MAC (CPSW2G NUSS) has two ports (one external) and provides Ethernet packet communication for the device. - CPSW2G NUSS features - the Reduced Gigabit Media Independent Interface (RGMII), - Reduced Media Independent Interface (RMII), the Management Data - Input/Output (MDIO) interface for physical layer device (PHY) management, - new version of Common Platform Time Sync (CPTS), updated Address Lookup - Engine (ALE). - One external Ethernet port (port 1) with selectable RGMII/RMII interfaces and - an internal Communications Port Programming Interface (CPPI5) (Host port 0). + The TI AM642x SoC Gigabit Ethernet MAC (CPSW3G NUSS) has three ports + (two external) and provides Ethernet packet communication and switching. + + The internal Communications Port Programming Interface (CPPI5) (Host port 0). Host Port 0 CPPI Packet Streaming Interface interface supports 8 TX channels - and one RX channels and operating by TI AM654x/J721E NAVSS Unified DMA - Peripheral Root Complex (UDMA-P) controller. - The CPSW2G NUSS is integrated into device MCU domain named MCU_CPSW0. + and one RX channels and operating by NAVSS Unified DMA Peripheral Root + Complex (UDMA-P) controller. - Additional features + CPSWxG features + updated Address Lookup Engine (ALE). priority level Quality Of Service (QOS) support (802.1p) Support for Audio/Video Bridging (P802.1Qav/D6.0) Support for IEEE 1588 Clock Synchronization (2008 Annex D, Annex E and Annex F) @@ -38,10 +35,18 @@ description: VLAN support, 802.1Q compliant, Auto add port VLAN for untagged frames on ingress, Auto VLAN removal on egress and auto pad to minimum frame size. RX/TX csum offload + Management Data Input/Output (MDIO) interface for PHYs management + RMII/RGMII Interfaces support + new version of Common Platform Time Sync (CPTS) + + The CPSWxG NUSS is integrated into + device MCU domain named MCU_CPSW0 on AM654x/J721E SoC. + device MAIN domain named CPSW0 on AM642x SoC. Specifications can be found at - http://www.ti.com/lit/ug/spruid7e/spruid7e.pdf - http://www.ti.com/lit/ug/spruil1a/spruil1a.pdf + https://www.ti.com/lit/pdf/spruid7 + https://www.ti.com/lit/zip/spruil1 + https://www.ti.com/lit/pdf/spruim2 properties: "#address-cells": true @@ -51,11 +56,12 @@ properties: oneOf: - const: ti,am654-cpsw-nuss - const: ti,j721e-cpsw-nuss + - const: ti,am642-cpsw-nuss reg: maxItems: 1 description: - The physical base address and size of full the CPSW2G NUSS IO range + The physical base address and size of full the CPSWxG NUSS IO range reg-names: items: @@ -66,12 +72,16 @@ properties: dma-coherent: true clocks: - description: CPSW2G NUSS functional clock + description: CPSWxG NUSS functional clock clock-names: items: - const: fck + assigned-clock-parents: true + + assigned-clocks: true + power-domains: maxItems: 1 @@ -99,16 +109,16 @@ properties: const: 0 patternProperties: - port@1: + port@[1-2]: type: object - description: CPSW2G NUSS external ports + description: CPSWxG NUSS external ports $ref: ethernet-controller.yaml# properties: reg: - items: - - const: 1 + minimum: 1 + maximum: 2 description: CPSW port number phys: diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml index 9b7117920d90..ce43a1c58a57 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml @@ -73,6 +73,13 @@ properties: items: - const: cpts + assigned-clock-parents: true + + assigned-clocks: true + + power-domains: + maxItems: 1 + ti,cpts-ext-ts-inputs: $ref: /schemas/types.yaml#/definitions/uint32 maximum: 8 diff --git a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml new file mode 100644 index 000000000000..59724d18e6f3 --- /dev/null +++ b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/net/toshiba,visconti-dwmac.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Toshiba Visconti DWMAC Ethernet controller + +maintainers: + - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> + +select: + properties: + compatible: + contains: + enum: + - toshiba,visconti-dwmac + required: + - compatible + +allOf: + - $ref: "snps,dwmac.yaml#" + +properties: + compatible: + oneOf: + - items: + - enum: + - toshiba,visconti-dwmac + - const: snps,dwmac-4.20a + + reg: + maxItems: 1 + + clocks: + items: + - description: main clock + - description: PHY reference clock + + clock-names: + items: + - const: stmmaceth + - const: phy_ref_clk + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + piether: ethernet@28000000 { + compatible = "toshiba,visconti-dwmac", "snps,dwmac-4.20a"; + reg = <0 0x28000000 0 0x10000>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&clk300mhz>, <&clk125mhz>; + clock-names = "stmmaceth", "phy_ref_clk"; + snps,txpbl = <4>; + snps,rxpbl = <4>; + snps,tso; + phy-mode = "rgmii-id"; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <0x1>; + #size-cells = <0x0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@1 { + device_type = "ethernet-phy"; + reg = <0x1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt index 7360617cdedb..2cd452419ed0 100644 --- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt +++ b/Documentation/devicetree/bindings/net/xilinx_axienet.txt @@ -38,6 +38,10 @@ Optional properties: 1 to enable partial TX checksum offload, 2 to enable full TX checksum offload - xlnx,rxcsum : Same values as xlnx,txcsum but for RX checksum offload +- xlnx,switch-x-sgmii : Boolean to indicate the Ethernet core is configured to + support both 1000BaseX and SGMII modes. If set, the phy-mode + should be set to match the mode selected on core reset (i.e. + by the basex_or_sgmii core input line). - clocks : AXI bus clock for the device. Refer to common clock bindings. Used to calculate MDIO clock divisor. If not specified, it is auto-detected from the CPU clock (but only on platforms where |