diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt')
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt | 58 |
1 files changed, 1 insertions, 57 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt index 91fab614c381..84c4111293bd 100644 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt @@ -51,23 +51,7 @@ Deprecated properties for iomux controller: Use rockchip,grf and rockchip,pmu described above instead. Required properties for gpio sub nodes: - - compatible: "rockchip,gpio-bank" - - reg: register of the gpio bank (different than the iomux registerset) - - interrupts: base interrupt of the gpio bank in the interrupt controller - - clocks: clock that drives this bank - - gpio-controller: identifies the node as a gpio controller and pin bank. - - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO - binding is used, the amount of cells must be specified as 2. See generic - GPIO binding documentation for description of particular cells. - - interrupt-controller: identifies the controller node as interrupt-parent. - - #interrupt-cells: the value of this property should be 2 and the interrupt - cells should use the standard two-cell scheme described in - bindings/interrupt-controller/interrupts.txt - -Deprecated properties for gpio sub nodes: - - compatible: "rockchip,rk3188-gpio-bank0" - - reg: second element: separate pull register for rk3188 bank0, use - rockchip,pmu described above instead +See rockchip,gpio-bank.yaml Required properties for pin configuration node: - rockchip,pins: 3 integers array, represents a group of pins mux and config @@ -128,43 +112,3 @@ uart2: serial@20064000 { pinctrl-names = "default"; pinctrl-0 = <&uart2_xfer>; }; - -Example for rk3188: - - pinctrl@20008000 { - compatible = "rockchip,rk3188-pinctrl"; - rockchip,grf = <&grf>; - rockchip,pmu = <&pmu>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - gpio0: gpio0@2000a000 { - compatible = "rockchip,rk3188-gpio-bank0"; - reg = <0x2000a000 0x100>; - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_gates8 9>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio1: gpio1@2003c000 { - compatible = "rockchip,gpio-bank"; - reg = <0x2003c000 0x100>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_gates8 10>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - ... - - }; |