diff options
Diffstat (limited to 'Documentation/devicetree/bindings/regulator/regulator.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/regulator/regulator.txt | 10 |
1 files changed, 10 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index 2babe15b618d..a7cd36877bfe 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -59,6 +59,11 @@ Optional properties: - regulator-initial-mode: initial operating mode. The set of possible operating modes depends on the capabilities of every hardware so each device binding documentation explains which values the regulator supports. +- regulator-allowed-modes: list of operating modes that software is allowed to + configure for the regulator at run-time. Elements may be specified in any + order. The set of possible operating modes depends on the capabilities of + every hardware so each device binding document explains which values the + regulator supports. - regulator-system-load: Load in uA present on regulator that is not captured by any consumer request. - regulator-pull-down: Enable pull down resistor when the regulator is disabled. @@ -68,6 +73,11 @@ Optional properties: 0: Disable active discharge. 1: Enable active discharge. Absence of this property will leave configuration to default. +- regulator-coupled-with: Regulators with which the regulator + is coupled. The linkage is 2-way - all coupled regulators should be linked + with each other. A regulator should not be coupled with its supplier. +- regulator-coupled-max-spread: Max spread between voltages of coupled regulators + in microvolts. Deprecated properties: - regulator-compatible: If a regulator chip contains multiple |