1 files changed, 0 insertions, 56 deletions
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt
deleted file mode 100644
index ca9101777c44..000000000000
--- a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-STMicroelectronics STM32 S/PDIF receiver (SPDIFRX).
-
-The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with
-IEC-60958 and IEC-61937.
-
-Required properties:
-  - compatible: should be "st,stm32h7-spdifrx"
-  - reg: cpu DAI IP base address and size
-  - clocks: must contain an entry for kclk (used as S/PDIF signal reference)
-  - clock-names: must contain "kclk"
-  - interrupts: cpu DAI interrupt line
-  - dmas: DMA specifiers for audio data DMA and iec control flow DMA
-    See STM32 DMA bindings, Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
-  - dma-names: two dmas have to be defined, "rx" and "rx-ctrl"
-
-Optional properties:
-  - resets: Reference to a reset controller asserting the SPDIFRX
-
-The device node should contain one 'port' child node with one child 'endpoint'
-node, according to the bindings defined in Documentation/devicetree/bindings/
-graph.txt.
-
-Example:
-spdifrx: spdifrx@40004000 {
-	compatible = "st,stm32h7-spdifrx";
-	reg = <0x40004000 0x400>;
-	clocks = <&rcc SPDIFRX_CK>;
-	clock-names = "kclk";
-	interrupts = <97>;
-	dmas = <&dmamux1 2 93 0x400 0x0>,
-	       <&dmamux1 3 94 0x400 0x0>;
-	dma-names = "rx", "rx-ctrl";
-	pinctrl-0 = <&spdifrx_pins>;
-	pinctrl-names = "default";
-
-	spdifrx_port: port {
-		cpu_endpoint: endpoint {
-			remote-endpoint = <&codec_endpoint>;
-		};
-	};
-};
-
-spdif_in: spdif-in {
-	compatible = "linux,spdif-dir";
-
-	codec_port: port {
-		codec_endpoint: endpoint {
-			remote-endpoint = <&cpu_endpoint>;
-		};
-	};
-};
-
-soundcard {
-	compatible = "audio-graph-card";
-	dais = <&spdifrx_port>;
-};