diff options
Diffstat (limited to 'Documentation/devicetree/bindings/spi/spi-samsung.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/spi/spi-samsung.txt | 26 |
1 files changed, 12 insertions, 14 deletions
diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt index 86aa061f069f..792efbaedc54 100644 --- a/Documentation/devicetree/bindings/spi/spi-samsung.txt +++ b/Documentation/devicetree/bindings/spi/spi-samsung.txt @@ -18,14 +18,11 @@ Required SoC Specific Properties: - interrupts: The interrupt number to the cpu. The interrupt specifier format depends on the interrupt controller. -[PRELIMINARY: the dma channel allocation will change once there are -official DMA bindings] +- dmas : Two or more DMA channel specifiers following the convention outlined + in bindings/dma/dma.txt -- tx-dma-channel: The dma channel specifier for tx operations. The format of - the dma specifier depends on the dma controller. - -- rx-dma-channel: The dma channel specifier for rx operations. The format of - the dma specifier depends on the dma controller. +- dma-names: Names for the dma channels. There must be at least one channel + named "tx" for transmit and named "rx" for receive. Required Board Specific Properties: @@ -42,15 +39,13 @@ Optional Board Specific Properties: - num-cs: Specifies the number of chip select lines supported. If not specified, the default number of chip select lines is set to 1. +- cs-gpios: should specify GPIOs used for chipselects (see spi-bus.txt) + SPI Controller specific data in SPI slave nodes: - The spi slave nodes should provide the following information which is required by the spi controller. - - cs-gpio: A gpio specifier that specifies the gpio line used as - the slave select line by the spi controller. The format of the gpio - specifier depends on the gpio controller. - - samsung,spi-feedback-delay: The sampling phase shift to be applied on the miso line (to account for any lag in the miso line). The following are the valid values. @@ -74,8 +69,11 @@ Example: compatible = "samsung,exynos4210-spi"; reg = <0x12d20000 0x100>; interrupts = <0 66 0>; - tx-dma-channel = <&pdma0 5>; - rx-dma-channel = <&pdma0 4>; + dmas = <&pdma0 5 + &pdma0 4>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; }; - Board Specific Portion: @@ -85,6 +83,7 @@ Example: #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&spi0_bus>; + cs-gpios = <&gpa2 5 0>; w25q80bw@0 { #address-cells = <1>; @@ -94,7 +93,6 @@ Example: spi-max-frequency = <10000>; controller-data { - cs-gpio = <&gpa2 5 1 0 3>; samsung,spi-feedback-delay = <0>; }; |