diff options
Diffstat (limited to 'Documentation/devicetree')
5 files changed, 60 insertions, 42 deletions
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml index 3ec579d63570..c40799355ed7 100644 --- a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml +++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml @@ -14,6 +14,9 @@ description: | Atmel maXTouch touchscreen or touchpads such as the mXT244 and similar devices. +allOf: + - $ref: input.yaml# + properties: compatible: const: atmel,maxtouch @@ -60,6 +63,10 @@ properties: or experiment to determine which bit corresponds to which input. Use KEY_RESERVED for unused padding values. + linux,keycodes: + minItems: 1 + maxItems: 8 + atmel,wakeup-method: $ref: /schemas/types.yaml#/definitions/uint32 description: | diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.txt b/Documentation/devicetree/bindings/input/cypress,cyapa.txt deleted file mode 100644 index d3db65916a36..000000000000 --- a/Documentation/devicetree/bindings/input/cypress,cyapa.txt +++ /dev/null @@ -1,42 +0,0 @@ -Cypress I2C Touchpad - -Required properties: -- compatible: must be "cypress,cyapa". -- reg: I2C address of the chip. -- interrupts: interrupt to which the chip is connected (see interrupt - binding[0]). - -Optional properties: -- wakeup-source: touchpad can be used as a wakeup source. -- pinctrl-names: should be "default" (see pinctrl binding [1]). -- pinctrl-0: a phandle pointing to the pin settings for the device (see - pinctrl binding [1]). -- vcc-supply: a phandle for the regulator supplying 3.3V power. - -[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt -[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - -Example: - &i2c0 { - /* ... */ - - /* Cypress Gen3 touchpad */ - touchpad@67 { - compatible = "cypress,cyapa"; - reg = <0x67>; - interrupt-parent = <&gpio>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */ - wakeup-source; - }; - - /* Cypress Gen5 and later touchpad */ - touchpad@24 { - compatible = "cypress,cyapa"; - reg = <0x24>; - interrupt-parent = <&gpio>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */ - wakeup-source; - }; - - /* ... */ - }; diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.yaml b/Documentation/devicetree/bindings/input/cypress,cyapa.yaml new file mode 100644 index 000000000000..29515151abe9 --- /dev/null +++ b/Documentation/devicetree/bindings/input/cypress,cyapa.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/cypress,cyapa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cypress All Points Addressable (APA) I2C Touchpad / Trackpad + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +properties: + compatible: + const: cypress,cyapa + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + wakeup-source: true + + vcc-supply: + description: 3.3V power + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + trackpad@67 { + reg = <0x67>; + compatible = "cypress,cyapa"; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpx1>; + wakeup-source; + }; + }; diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.yaml b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml index d32716c604fe..6398534b43c3 100644 --- a/Documentation/devicetree/bindings/input/pwm-vibrator.yaml +++ b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml @@ -32,6 +32,8 @@ properties: minItems: 1 maxItems: 2 + enable-gpios: true + vcc-supply: true direction-duty-cycle-ns: diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml index 1959ec394768..4080422a9eb5 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml @@ -40,6 +40,8 @@ properties: linux,keycodes: description: EV_ABS specific event code generated by the axis. + wakeup-source: true + patternProperties: "^button@[0-9]+$": type: object |