diff options
Diffstat (limited to 'Documentation/isdn/README.fax')
| -rw-r--r-- | Documentation/isdn/README.fax | 45 |
1 files changed, 0 insertions, 45 deletions
diff --git a/Documentation/isdn/README.fax b/Documentation/isdn/README.fax deleted file mode 100644 index 5314958a8a6e..000000000000 --- a/Documentation/isdn/README.fax +++ /dev/null @@ -1,45 +0,0 @@ - -Fax with isdn4linux -=================== - -When enabled during kernel configuration, the tty emulator -of the ISDN subsystem is capable of the Fax Class 2 commands. - -This only makes sense under the following conditions : - -- You need the commands as dummy, because you are using - hylafax (with patch) for AVM capi. -- You want to use the fax capabilities of your isdn-card. - (supported cards are listed below) - - -NOTE: This implementation does *not* support fax with passive - ISDN-cards (known as softfax). The low-level driver of - the ISDN-card and/or the card itself must support this. - - -Supported ISDN-Cards --------------------- - -Eicon DIVA Server BRI/PCI - - full support with both B-channels. - -Eicon DIVA Server 4BRI/PCI - - full support with all B-channels. - -Eicon DIVA Server PRI/PCI - - full support on amount of B-channels - depending on DSPs on board. - - - -The command set is known as Class 2 (not Class 2.0) and -can be activated by AT+FCLASS=2 - - -The interface between the link-level-module and the hardware-level driver -is described in the files INTERFACE.fax and INTERFACE. - -Armin -mac@melware.de - |